EGO STA1500-FC Manuel utilisateur

Catégorie
Coupe-herbe
Taper
Manuel utilisateur

Ce manuel convient également à

OPERATOR'S MANUAL
STRING TRIMMER
ATTACHMENT
MODEL NUMBER STA1500/STA1500-FC
WARNING: To reduce the risk of injury, the user must read and understand the
Operator’s Manual before using this product. Save these instructions for future reference.
Español p. 69
Français p. 33
16-1107_EGO_STA1500_StringTrimmerAttachment_manual_NA_V1
EXCLUSIVELY FOR USE WITH
EGO POWER+ POWER HEAD
PH1400/PH1400-FC
STRING TRIMMER ATTACHMENT STA1500/STA1500-FC2
TABLE OF CONTENTS
Safety Symbols ..........................................4
Safety Instructions ......................................5-9
Introduction .............................................9
Specifications ..........................................10
Packing List ............................................10
Description .........................................11-12
Assembly ...........................................13-16
Operation ...........................................17-22
Maintenance ........................................23-28
Troubleshooting ......................................29-30
Warranty ...........................................31-32
STRING TRIMMER ATTACHMENT STA1500/STA1500-FC 3
READ ALL INSTRUCTIONS!
READ & UNDERSTAND
OPERATOR'S MANUAL
WARNING:
Some dust created by power sanding, sawing, grinding, drilling
and other construction activities contains chemicals known to the state of California
to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
Lead from lead-based paints
Crystalline silica from bricks and cement and other masonry products, and
Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
STRING TRIMMER ATTACHMENT STA1500/STA1500-FC4
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers. The
safety symbols and the explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves, eliminate any danger.
The instructions and warnings they give are no substitutes for proper accident
prevention measures.
WARNING:
Be sure to read and understand all safety instructions in this
Operator’s Manual, including all safety alert symbols such as “DANGER,“WARNING,
and “CAUTION” before using this tool. Failure to following all instructions listed below
may result in electric shock, fire, and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL:
Indicates DANGER, WARNING, OR CAUTION.
May be used in conjunction with other symbols or pictographs.
WARNING!
The operation of any power tools can result in foreign
objects being thrown into your eyes, which can result in severe eye
damage. Before beginning power tool operation, always wear safety
goggles or safety glasses with side shield and a full face shield when
needed. We recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields. Always use eye protection
which is marked to comply with ANSI Z87.1.
STRING TRIMMER ATTACHMENT STA1500/STA1500-FC 5
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may appear on this product. Read,
understand, and follow all instructions on the machine before attempting to assemble
and operate it.
Safety Alert Indicates a potential personal injury hazard.
Read &
Understand
Operator's
Manual
To reduce the risk of injury, user must read and
understand the operator’s manual before using
this product.
Eye Protection
Always wear safety goggles or safety glasses
with side shields and a full face shield when
operating this product.
Recycle Symbols
This product uses lithium - ion (Li - ion) batteries.
Local, state, or federal laws may prohibit disposal
of batteries in ordinary trash. Consult your
local waste authority for information regarding
available recycling and/or disposal options.
IPX4
Ingress Protection
Degree
Protection from splashing water
V Volt Voltage
mm Millimeter Length or size
cm Centimeter Length or size
in. Inch Length or size
kg Kilogram Weight
lb Pound Weight
Direct Current Type or a characteristic of current
STRING TRIMMER ATTACHMENT STA1500/STA1500-FC6
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
When using electric trimmers, basic safety precautions should
always be followed to reduce the risk of fire, electric shock, and personal injury,
including the following:
READ ALL INSTRUCTIONS
DANGER!
Do not rely on the tool’s insulation against electric shock. To reduce
the risk of electrocution, never operate the tool in the vicinity of any wires or cables
which may carry electric current.
CAUTION!
Wear appropriate personal hearing protection during use. Under some
conditions and durations of use, noise from this product may contribute to hearing loss.
Keep Children Away - All visitors should be kept at least 100 feet away from
work area.
Avoid Dangerous Environments – Don’t use appliances on damp or wet slope.
Dress Properly - Do not wear loose clothing or jewelry. They can be caught in
moving parts. Use of rubber gloves and substantial footwear is recommended
when working outdoors. Wear protective hair covering to contain long hair.
Use Safety Glasses - Always use face or dust mask if operation is dusty.
Use the Right Tool - Do not use the tool for any job except that for which it is
intended.
Don’t Force the Trimmer - It will do the job better and with less likelihood of a
risk of injury at the rate for which it was designed.
Don’t Overreach - Keep proper footing and balance at all times.
Stay Alert - Watch what you are doing. Use common sense. Do not operate the
trimmer when you are tired.
Do not operate the trimmer while under the influence of alcohol or drugs.
Keep guards in place and in working order.
WARNING:
To reduce the risk of injury to persons, do not operate without guards
in place.
Keep hands and feet away from the cutting area.
Store Trimmer Indoors - When not in use the trimmer should be stored indoors in a
dry and high or locked-up place with the battery pack removed- out of reach of children.
STRING TRIMMER ATTACHMENT STA1500/STA1500-FC 7
Maintain Trimmer With Care - Keep the cutting attachment clean for best
performance and to reduce the risk of injury. Follow the instructions for changing
accessories. Keep the handles dry, clean, and free from oil and grease.
Check Damaged Parts - Before further use of the trimmer, a guard or other
part that is damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting, and any other condition
that may affect its operation. A guard or other part that is damaged should be
properly repaired or replaced by an authorized service center unless indicated
elsewhere in this manual.
Clear the area to be cut before each use. Remove all objects such as rocks,
broken glass, nails, wire, or string that can be thrown or become entangled in the
cutting attachment. Make sure that other persons and pets are at least 100 ft.
(30.5m) away.
Always hold the trimmer firmly, with both hands on the handles, while
operating. Wrap your fingers and thumbs around the handles.
Avoid Accidentally Starting - Don’t carry the trimmer with your finger on
the trigger.
Do not operate the trimmer in gaseous or explosive atmospheres. Motors
in these appliances normally spark, and the sparks might ignite fumes.
Damage to Trimmer - If you strike a foreign object with the trimmer or it
becomes entangled, stop the tool immediately, check for damage and have any
damage repaired before further operation is attempted. Do not operate with a
broken guard or spool.
If the equipment should start to vibrate abnormally, stop the motor and
check immediately for the cause. Vibration is generally a warning of trouble.
A loose head may vibrate, crack, break or come off the trimmer, which may result
in serious or fatal injury. Make sure that the cutting attachment is properly fixed
in position. If the head loosens after fixing it in position, replace it immediately.
Never use a trimmer with a loose cutting attachment.
Replace a cracked, damaged or worn-out cutting head immediately, even
if damage is limited to superficial cracks. Such attachments may shatter at
high speed and cause serious or fatal injury.
Check the cutting attachment at regular short intervals during operation,
or immediately if there is a noticeable change in cutting behavior.
STRING TRIMMER ATTACHMENT STA1500/STA1500-FC8
When replacing the cutting line, use no more than 2.4mm nylon line;
using heavier lines than recommended by the manufacturer increases the load
on the motor and reduces its operating speed. This results in overheating and
damage to the trimmer.
To reduce the risk of serious injury, never use wire or metal-reinforced
line or other material in place of the nylon cutting lines. Pieces of wire
could break off and be thrown at high speed toward the operator or bystanders.
To reduce the risk of injury from loss of control, never work on a ladder
or on any other insecure support. Never hold the cutting attachment
above waist height.
Do not charge the battery pack in rain, or in wet locations.
Use only with the battery packs and chargers listed below:
BATTERY PACK CHARGER
BA1120, BA1120-FC, BA1400, BA1400-FC,
BA2240, BA2240-FC, BA2800, BA2800-FC,
BA4200, BA4200-FC, BA1400T, BA1400T-FC,
BA2800T, BA2800T-FC, BA4200T, BA4200T-FC,
BA5600T, BA5600T-FC
CH2100, CH2100-FC,
CH5500, CH5500-FC
Use Only With The 56V Lithium-Ion Power Head PH1400/PH1400-FC.
Do not dispose of the battery in a fire. The cells may explode. Check with
local codes for possible special disposal instructions.
Do not open or mutilate the battery. Released electrolyte is corrosive and
may cause damage to the eyes or skin. It may be toxic if swallowed.
Exercise care in handling batteries in order not to short the battery with
conducting materials such as rings, bracelets, and keys. The battery or
conductor may overheat and cause burns.
Replacement Parts - When servicing, use only identical EGO replacement parts.
Use of any other accessory or attachment may increase the risk of injury.
Battery tools do not have to be plugged into an electrical outlet;
therefore, they are always in operating condition. Be aware of possible
hazards even when the tool is not operating. Take care when performing
maintenance or service.
Remove or disconnect battery pack before servicing, cleaning or
removing material from the trimmer.
STRING TRIMMER ATTACHMENT STA1500/STA1500-FC 9
Do not wash with a hose; avoid getting water in motor and electrical
connections.
Do not incinerate the appliance even if it is severely damaged. The
batteries can explode in a fire.
Do not expose a battery pack or tool to fire or excessive temperature.
Exposure to fire or temperature above 212 °F (100°C) may cause explosion.
If situations occur that are not covered in this manual, use care and
good judgment. Contact the EGO Customer Service Center for assistance.
Save these instructions. Refer to them frequently and use them to instruct
others who may use this tool. If you lend this tool to someone else, also lend
these instructions to them to prevent misuse of the product and possible injury.
SAVE THESE INSTRUCTIONS!
NOTE: SEE YOUR POWER HEAD OPERATOR’S MANUAL FOR
ADDITIONAL SPECIFIC SAFETY RULES.
INTRODUCTION
Congratulations on your selection of the STRING TRIMMER ATTACHMENT. It has been
designed, engineered and manufactured to give you the best possible dependability
and performance.
Should you experience any problem you cannot easily remedy, please contact EGO
customer service center 1-855-EGO-5656.
This manual contains important information on to the safe assembly, operation and
maintenance of your string trimmer. Read it carefully before using the string trimmer.
Keep this manual handy so you can refer to it at any time.
SERIAL NUMBER _____________________ DATE OF PURCHASE _________________
YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP THEM IN A
SAFE PLACE FOR FUTURE REFERENCE
STRING TRIMMER ATTACHMENT STA1500/STA1500-FC10
SPECIFICATIONS
Cutting Mechanism Bump Head
Cutting Line Type 0.095" (2.4 mm) nylon twist line
Cutting Width 15 in. (38 cm)
Recommended Operating Temperature 32°F-104°F (0°C-40°C)
Recommended Storage Temperature -4°F-158°F (-20°C-70°C)
Weight 3.51 lb. (1.59 kg)
Recommended Cutting Line
PART NAME TYPE MODEL NUMBER
Cutting Line 0.095"/2.4mm twist line (Recommended)
AL2415S
AL2450S
AL2420P
PACKING LIST
PART NAME QUANTITY
String Trimmer Attachment 1
Guard 1
Hex Wrench 1
Multi-Function Wrench 1
Operator's Manual 1
STRING TRIMMER ATTACHMENT STA1500/STA1500-FC 11
DESCRIPTION
KNOW YOUR STRING TRIMMER (Fig. 1)
The safe use of this product requires an understanding of the information on the tool and
in this operator’s manual, as well as knowledge of the project you are attempting. Before
using this product, familiarize yourself with all operating features and safety rules.
1
String-Trimmer Shaft
End Cap
Guard
Line-cutting Blade
Cutting Line
Release Tab
Trimmer Head
(Bump Head)
Multi-Function Wrench
Hex Wrench
WARNING:
Never operate the tool without the guard firmly in place. The guard
must always be on the tool to protect the user.
STRING TRIMMER ATTACHMENT STA1500/STA1500-FC12
TRIMMER HEAD (BUMP HEAD)
Stores the cutting line and releases the cutting line when the head is lightly tapped on
the ground during operation.
GUARD
Reduces the risk of injury from foreign objects flung backwards toward the operator
and from contact with the cutting attachment.
LINE-CUTTING BLADE
Steel blade on the guard that maintains the cutting line at the proper length.
RELEASE TAB
Releases the spool retainer from the spool base.
STRING TRIMMER ATTACHMENT STA1500/STA1500-FC 13
ASSEMBLY
WARNING:
If any parts are damaged or missing, do not operate this product
until the parts are replaced. Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING:
Do not attempt to modify this product or create accessories not
recommended for use with this string trimmer. Any such alteration or modification is
misuse and could result in a hazardous condition leading to possibly serious personal
injury.
WARNING:
Do not connect to power head until assembly is complete. Failure to
comply could result in accidental starting and possible serious personal injury.
UNPACKING
This product requires assembly.
Carefully remove the product and any accessories from the box. Make sure that
all items listed in the packing list are included.
WARNING:
Do not use this product if any parts on the Packing List are already
assembled to your product when you unpack it. Parts on this list are not assembled to
the product by the manufacturer and require customer installation. Use of a product
that may have been improperly assembled could result in serious personal injury.
Inspect the tool carefully to make sure that no breakage or damage occurred
during shipping.
Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
If any parts are damaged or missing, please return the product to the place of
purchase.
STRING TRIMMER ATTACHMENT STA1500/STA1500-FC14
MOUNTING THE GUARD
NOTICE: Install the guard before the
attachment is connected to the power head.
WARNING:
To reduce the risk of
injury to persons, do not operate without
guards in place.
WARNING:
Always wear gloves
when mounting or replacing the guard. Be
careful of the blade on the guard and protect
your hands from being injured by the blade.
1. Loosen the two bolts in the guard
with the supplied hex wrench;
remove the bolts and spring
washers from the guard (Fig. 2).
2. Lift the trimmer head and face it
downward; align the two mounting
holes in the guard with the two
assembly holes in the base of the
shaft. Make sure that the internal surface of the guard faces towards the trimmer
head (Fig. 3).
3. Use the supplied hex wrench to lock the guard in place with the bolts.
CONNECTING THE STRING TRIMMER ATTACHMENT TO THE POWER HEAD
WARNING:
Never attach or adjust any attachment while the power head is
running or with the battery installed. Failure to stop the motor and remove the battery
may cause serious personal injury.
This string trimmer attachment is designed for use with EGO Power Head PH1400/PH1400-FC.
The string trimmer attachment connects to the power head by means of a coupler device.
1. Stop the motor and remove the battery pack.
2. Loosen the wing knob on the power-head coupler.
2
3
STRING TRIMMER ATTACHMENT STA1500/STA1500-FC 15
3. If the end cap is on the string trimmer attachment shaft, remove it and save it in a
safe place for later use. Align the arrow on the string trimmer shaft with the arrow
on the coupler (Fig. 4a) and push the string trimmer shaft into the coupler until
you hear a clear “CLICK” sound. The coupler should be positioned all the way to
the RED LINE labeled on the string trimmer shaft: the red line must be flush with
the coupler edge (Fig. 4b).
4. Pull on the shaft of the string trimmer attachment to verify that it is securely locked into
the coupler. If not, rotate the string trimmer shaft from side to side in the coupler until a
clear “CLICK” sound indicates that it is engaged.
5. Tighten the wing knob securely.
WARNING:
Be certain that the wing knob is fully tightened before operating the
equipment; check it periodically for tightness during use to avoid serious personal injury.
Arrow on the Attachment Shaft
4a
Arrow on the Coupler
Shaft-Release Button
Wing Knob
Red Line
4b
Red Line
REMOVING THE ATTACHMENT FROM THE POWER HEAD
1. Stop the motor and remove the battery pack.
2. Loosen the wing knob.
3. Press the shaft-release button and, with the button depressed, pull or twist the
attachment shaft out of the coupler.
STRING TRIMMER ATTACHMENT STA1500/STA1500-FC16
OPERATION
WARNING:
Do not allow familiarity with this product to make you careless.
Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
Always wear safety goggles or safety glasses with side shield
marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown
into your eyes and other possible serious injuries.
WARNING:
Do not use any attachments or accessories not recommended by the
manufacturer of this product. The use of attachments or accessories not recommended
can result in serious personal injury.
APPLICATIONS
You may use this product for the purpose listed below:
Trimming grass and weeds from around porches, fences, and decks.
HOLDING THE STRING TRIMMER
WITH POWER HEAD (Fig. 5)
WARNING:
Dress properly to
reduce the risk of injury when operating
this tool. Do not wear loose clothing
or jewelry. Wear eye and ear/hearing
protection. Wear heavy, long pants, boots
and gloves. Do not wear short pants or
sandals or go barefoot.
Hold the string trimmer with one hand on
the rear handle and your other hand on
the front-assist handle. Keep a firm grip
with both hands while operating the tool.
The string trimmer should be held at a
comfortable position, with the rear handle
at about hip height. The trimmer head should be parallel to the ground such that it
easily contacts the material to be cut without the operator having to bend over.
5
STRING TRIMMER ATTACHMENT STA1500/STA1500-FC 17
USING THE STRING TRIMMER
WARNING:
To avoid serious personal injury, wear goggles or safety glasses at all
times when operating this unit. Wear a face mask or dust mask in dusty locations.
Clear the area to be cut before each use. Remove all objects, such as rocks, broken
glass, nails, wire, or string that can be thrown or become entangled in the cutting
attachment. Clear the area of children, bystanders, and pets. At a minimum, keep all
children, bystanders and pets at least 100 feet (30.5m) away; there still may be risk
to bystanders from thrown objects. Bystanders should be encouraged to wear eye
protection. If you are approached, stop the motor and cutting attachment immediately.
WARNING:
To prevent serious personal injury, remove the battery pack from the
tool before servicing, cleaning, changing attachments or removing material from the
unit.
Before each use check for damaged/worn parts
Check the trimmer head, guard and front-assist handle and replace any parts that are
cracked, warped, bent, or damaged in any away.
The line-cutting blade on the edge of the guard can dull over time. It is recommended
that you periodically sharpen it with a file or replace it with a new blade.
WARNING:
Always wear gloves when mounting or replacing the guard or when
sharpening or replacing the blade. Note the location of the blade on the guard and
protect your hand from injury.
Clean the trimmer after each use
See the Maintenance section for cleaning instructions.
WARNING:
Never use water for cleaning your trimmer. Avoid using solvents
when cleaning plastic parts. Most plastics are susceptible to damage from various
types of commercial solvents. Use clean clothes to remove dirt, dust, oil, grease, etc.
TO START/STOP THE TOOL
See "STARTING/STOPPING THE POWER HEAD" section in the power head PH1400/
PH1400-FC operator's manual.
STRING TRIMMER ATTACHMENT STA1500/STA1500-FC18
Tips for best trimming results
(Fig. 6)
The correct angle for the cutting
attachment is parallel to the ground.
Do not force the trimmer. Allow the
very tip of the line to do the cutting
(especially along walls). Cutting with
more than the tip will reduce cutting
efficiency and may overload the
motor.
The cutting height is determined by the distance of the cutting line from the lawn
surface.
Grass over 8 inches (200 mm) should be cut by working from top to the bottom in
small increments to avoid premature line wear or motor drag.
Slowly move the trimmer into and out of the area being cut, maintaining the
cutting head position at the desired cutting height. This movement can be either
a forward-backward motion or a side-to-side motion. Cutting shorter lengths
produces best results.
Trim only when grass and weeds are dry.
Wire and picket fences can cause extra string wear or breakage. Stone and brick
walls, curbs, and wood may wear strings rapidly.
Avoid trees and shrubs. Tree bark, wood moldings, siding, and fence posts can
easily be damaged by the strings.
ADJUSTING CUTTING LINE
LENGTH
The trimmer head allows the operator to
release more cutting line without stopping
the motor. As line becomes frayed or
worn, additional line can be released by
lightly tapping the trimmer head on the
ground while operating the trimmer
(Fig. 7).
7
6
Best cutting
area
Rotation
direction
STRING TRIMMER ATTACHMENT STA1500/STA1500-FC 19
WARNING:
Do not remove or alter the line-cutting blade assembly. Excessive
line length will cause the motor to overheat and may result in serious personal injury.
For best results, tap the trimmer head on bare ground or hard soil. If line release is
attempted in tall grass, the motor may overheat. Always keep the trimming line fully
extended. Line release becomes more difficult as the cutting line becomes shorter.
LOAD NEW CUTTING LINE
NOTICE: Always use the recommended nylon cutting line with diameter not greater
than 0.095in. (2.4mm). Using line other than that specified may cause the string
trimmer to overheat or become damaged.
WARNING:
Never use metal-reinforced line, wire, or rope, etc. These can break
off and become dangerous projectiles.
WARNING:
To prevent serious personal injury, remove the battery pack from
the power head before servicing, cleaning, changing attachments or removing material
from the unit.
1. Remove the battery pack.
2. Remove the remaining cutting line,
if necessary. Simply pull it out by
hand.
3. Cut one piece of cutting line 16 ft.
(5m) long. Insert the line into the
eyelet. Push the line until the end
of the line comes out of the other
side of the trimmer head. Pull the
line from the other side until equal
amounts of line appear on both
sides (Fig. 8).
4. Press and rotate lower cover
assembly in the direction indicated
by the arrow to wind the cutting
line onto the spool that until
approximately 5.5 in. (14cm) of line
is showing on each side (Fig. 9).
9
5.5” (14 cm)
8
Arrow Direction
Eyelet
STRING TRIMMER ATTACHMENT STA1500/STA1500-FC20
5. Push the lower cover assembly down while pulling on the lines to manually
advance the line and to check for proper assembly of the trimmer head.
When the cutting line breaks from the line outlet or the cutting line is not released when
the trimmer head is tapped, follow the steps below:
1. Remove the battery pack.
2. Hold the trimmer head as shown in
Fig. 10 and use one thumb to press
one release tab on either side while
gently pulling on the lower cover
assembly with the other hand to
release the tab.
3. Repeat on the other side to release
the other release tab from the
trimmer head.
4. Remove the lower cover assembly
with the spring from the trimmer
head (Fig. 11 & 12).
5. Remove the cutting line from the
spool (Fig. 12).
10
Release Tab
11
Spring
Lower Cover Assembly
12
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104

EGO STA1500-FC Manuel utilisateur

Catégorie
Coupe-herbe
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues