Samsung UN40C6300 Manuel utilisateur

LED TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model _____________ Serial No. _____________

LED TV user manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs

Samsung.

Country

Customer Care Center

Web Site Address

CANADA 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics Canada Inc., Customer Service

55 Standish Court Mississauga, Ontario L5R 4B2

Canada

U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics America, Inc. 105 Challenger

Road Ridgeeld Park, NJ 07660-0511

BN68-03165B-00

[UC6300-Canada]BN68-03165B-00L02.indb 1 2010-06-22 오후 1:00:24

2

English

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and speciﬁcations may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

✎

See the warranty card for more information on warranty terms.

Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.

The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to ﬁll the screen if your model offers this feature and

the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on no expanded standard format

television video and programming, should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics

and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven

aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and

primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to

view different formats as a full screen picture.

Be careful in the selection and duration of television formats used for viewing. Uneven LED aging as a result of format selection and use, as well as burned

in images, are not covered by your Samsung limited warranty.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG)

products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service

in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the

warranty period originally speciﬁed, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited

Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service

Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those

encountered in normal use of the product.

Excluded, but not limited to, are any originally speciﬁed provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or

replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

– In the United States : 1-800-SAMSUNG (1-800-726-7864)

– In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news

bars at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LED screen, which will affect image quality. To reduce

risk of this effect, please follow below recommendations:

• Avoid displaying the same TV channel for long periods.

• Always try to display a full screen image.

• Reducing brightness and contrast will help to avoid the appearance of after-images.

• Use all TV features designed to reduce image retention and screen burn, refer to proper user manual section for details.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in ﬁre or a problem with the product due to an increase in the internal temperature of the product.

✎

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

x

If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

✎

The appearance may differ depending on the product.

Installation with a stand. Installation with a wall-mount.

4 inches

[UC6300-Canada]BN68-03165B-00L02.indb 2 2010-06-22 오후 1:00:25

3

Contents

ENGLISH

English

Getting Started

y List of Features ......................................................... 4

y Accessories .............................................................. 4

y Install the Stand ........................................................ 5

y Viewing the Control Panel ......................................... 6

y Viewing the Remote Control ...................................... 7

y Connecting to an Antenna ........................................ 8

y Plug & Play (Initial Setup) ........................................... 8

Connections

y Connecting to an AV Device ...................................... 9

y Connecting to an Audio Device ............................... 10

y Connecting to a PC ................................................ 11

y Changing the Input Source ..................................... 12

Basic Features

y How to Navigate Menus .......................................... 12

y Channel Menu ........................................................ 13

Seeing Channels 13

Using Favorite Channels 13

Memorizing Channels 13

Editing Channels 14

Other Features 14

y Picture Menu .......................................................... 15

Changing the Preset Picture Mode 15

Adjusting Picture Settings 15

Economical Solutions 15

Changing the Picture Options 15

Setting up the TV with Your PC 17

y Sound Menu ........................................................... 18

Changing the Preset Sound Mode 18

Adjusting Sound Settings 18

Sound Settings 18

y Setup Menu ............................................................ 19

Setting the Time 19

Using the Sleep Timer 19

Setting the On / Off Timer 20

Locking Programs 20

Other Features 21

Picture In Picture (PIP) 23

y Support Menu ......................................................... 23

Advanced Features

y Network Connection ............................................... 25

Connecting to a Wired Network 25

Connecting to a Wireless Network 27

y Media Play .............................................................. 31

Connecting a USB Device 31

Connecting to your PC through a network 31

Screen Display 33

Playing Multiple Files 36

Media Play - Additional Functions 36

y Anynet+ .................................................................. 38

Setting Up Anynet+ 39

Switching between Anynet+ Devices 39

Recording 39

Listening through a Receiver 40

Troubleshooting for Anynet+ 40

y AllShare .................................................................. 41

About AllShare 41

Setting Up AllShare 41

Other Information

y Assembling the Cables ........................................... 43

y Installing the Wall Mount ......................................... 44

y Anti-theft Kensington Lock ...................................... 45

y Securing the TV to the Wall ..................................... 46

y Troubleshooting ...................................................... 47

y License ................................................................... 50

y Speciﬁcations ......................................................... 51

y Dimensions ............................................................. 52

y Index ...................................................................... 53

Check the Symbol!



TOOLS

This function can be used by pressing the

TOOLS button on the remote control.

Note Step by Step Guide

Indicates additional information. Check here for instructions on how to open

the relevant submenu within the OSD

(on screen display).

[UC6300-Canada]BN68-03165B-00L02.indb 3 2010-06-22 오후 1:00:25

4

English

Getting Started

List of Features

y Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed

without a cable box / STB (Set-Top-Box) satellite receiver.

y Media Play: Allows you to play music ﬁles, pictures and movies saved on a USB device (p. 31).

y AllShare: AllShare connects your TV and compatible Samsung mobile phones/devices through a network (p. 41).

y Self Diagnosis: You can check to make sure picture and sound operate normally (p. 23).

Accessories

✎

Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.

✎

The items' colors and shapes may vary depending on the models.

y Remote Control (BN59-01041A) & Batteries (AAA x 2)

y Owner’s Instructions

y Warranty Card / Safety Guide / Quick Setup Guide

y Cleaning Cloth (BN63-01798B)

y Power Cord

(M4 X L8)

Blanking Bracket & Screw (1EA) Cable Tie Holder-Ring (4EA)

(BN63-06543A) (BN61-05596A) (BN61-05280A)

Holder-Wire stand Holder-Wire (3EA) Power Cord Clamp

(BN61-05491A) (BN61-05373A) (AA65-30023A)

✎

For best cable connection to this product, be sure to use cables with a maximum thickness as below:

y Maximum thickness - 0.55 inches (14mm)

Input Cables (Sold Separately)

HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA

[UC6300-Canada]BN68-03165B-00L02.indb 4 2010-06-22 오후 1:00:27

5

01 Getting Started

English

Install the Stand

See separate guide for installing the stand.

s

5EA (M4 X L12)

(A)

(B)

5EA (M4 X L8)

Stand (1EA) Guide Stand (1EA) Screws (10EA)

Follow the steps below to connect the TV to the stand.

s

Top view

Rear

Front

Rear

Guide Stand

Screws (M4 X L12)

Stand

1. Connect the Guide Stand to the Stand using ﬁve screws (M4 X L12) as shown.

s

Screws (M4 X L8)

1

s

2

2. With your TV upright, connect the TV to the Stand as

shown.

3. Fasten two screws (M4 X L8) at position 1, and then

fasten three screws (M4 X L8) at position 2.

✎

NOTE

x

Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.

x

Make sure that at least two persons lift and move the LED TV.

x

Stand the product up and fasten the screws. If you fasten the screws with the LED TV placed down, it may lean to

one side.

[UC6300-Canada]BN68-03165B-00L02.indb 5 2010-06-22 오후 1:00:28

6

Getting Started

English

Viewing the Control Panel

✎

The product color and shape may vary depending on the model.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

Remote control sensor Aim the remote control towards this spot on the TV.

SOURCE



Toggles between all the available input sources. In the on-screen menu, use this

button as you would use the ENTER



button on the remote control.

MENU Displays an on-screen the OSD (on screen display) of your TV’s features.



Adjusts the volume. In the OSD, use the



buttons as you would use the

◄ and ► buttons on the remote control.



Changes the channels. In the OSD, use the



buttons as you would use the

▼ and ▲ buttons on the remote control.



(Power)

Turns the TV on or off.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount

of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

Remote control sensor

Speakers

Power Indicator

[UC6300-Canada]BN68-03165B-00L02.indb 6 2010-06-22 오후 1:00:29

7

01 Getting Started

English

Viewing the Remote Control

✎

This is a special remote control for the visually impaired and has Braille points on the Power, Channel and Volume

buttons.

Installing batteries (Battery size: AAA)

✎

NOTE

x

Use the remote control within 23 feet from the TV.

x

Bright light may affect the performance of the remote control.

Avoid use when nearby fluorescent lights or neon signs.

x

The color and shape may vary depending on the model.

CH LIST

MUTE

POWER

SOURCE

PRE-CH

ON/OFF

MENU

TOOLS

RETURN

S.MODE

P.MODE

MEDIA.P

FAV.CH

P.SIZE

CC

SLEEP

A B C D

MTS

EXIT

INFO

Turns the TV on and off.

Returns to the previous channel.

Cuts off the sound temporarily.

Displays the channel list on the screen

(p. 13).

Changes channels.

Turns the remote control light on or

off. When on, the buttons become

illuminated for a moment when pressed.

(Using the remote control with this button

set to ON will reduce the battery usage

time.)

Displays Favorite Channel Lists on the

screen (p. 13).

Displays information on the TV screen.

Selects the on-screen menu items and

changes the values seen on the menu.

Exits the menu.

S.MODE: Press to select the sound

mode (p. 18).

SLEEP: Use to set the sleep timer

function (p. 19).

MTS: Press to choose stereo, mono

or Separate Audio Program (SAP

broadcast) (p. 18, 19).

P.MODE: Press to select the picture

mode (p. 15).

P.SIZE: Selects the picture size (p. 16).

CC: Controls the caption decoder

(p. 21).

Displays and selects the available video

sources (p. 12).

Press to directly access channels.

Press to select additional channels

(digital) being broadcasted by the same

station. For example, to select channel

“54-3”, press “54”, then press “-” and

“3”.

Adjusts the volume.

Brings up the OSD.

Displays Media Play (p. 31).

Quickly select frequently used functions.

Returns to the previous menu.

These buttons are for the Channel list,

Media Play menu, etc.

Use these buttons in Media Play

and Anynet+ (HDMI-CEC) modes

(p. 31, 38).

(



: Controls recording for Samsung

recorders that have the Anynet+

feature)

[UC6300-Canada]BN68-03165B-00L02.indb 7 2010-06-22 오후 1:00:29

8

Getting Started

English

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

✎

Connecting the power cord and antenna.

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the

POWER



button. Plug & Play is available only when the Input source is set to TV.

✎

To return to the previous step, press the Red button.

1

Selecting a language

Press the ▲ or ▼ button, then press the ENTER



button. Select the

desired OSD (On Screen Display) language.

P

POWER

2

Selecting Store Demo

or Home Use

Press the ◄ or ► button, then press the ENTER



button.

y Select the Home Use mode. Store Demo mode is for retail

environments.

y To return the unit’s settings from Store Demo to Home Use

(standard): Press the volume button on the TV. When you see the

volume OSD, press and hold MENU for 5 sec.

3

Selecting an antenna

Press the ▲ or ▼ button, then press the ENTER



button. Select Air, Cable or Auto.

4

Selecting a channel

Press the ▲ or ▼ button, then press the ENTER



button. Select the channel source

to memorize. When setting the antenna source to Cable, a step appears allowing you to

assign numerical values (channel frequencies) to the channels. For more information, refer to

Channel → Auto Program (p. 13).

✎

Press the ENTER



button at any time to interrupt the memorization process.

5

Setting the

Clock Mode

Set the Clock Mode automatically or manually.

y Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.

y Manual: Allows you to manually set the current date and time (p. 19).

6

Viewing the

HD Connection Guide.

y The connection method for the best HD screen quality is displayed.

7

Enjoy your TV.

Press the ENTER



button.

If You Want to Reset This Feature...



MENU



→ Setup → Plug & Play → ENTER



ANT OUT

or

VHF/UHF Antenna

Cable

Power Input

Antenna Cable (Not Supplied)

[UC6300-Canada]BN68-03165B-00L02.indb 8 2010-06-22 오후 1:00:30

9

English

02 Connections

Connections

Connecting to an AV Device

✎✎

The✎prod uct✎color✎and✎shape✎may✎vary✎depending✎on✎the✎model.

Using an HDMI or HDMI/DVI cable: HD connection (up to 1080p)

We✎recommend✎using✎the✎HDMI✎connection✎for✎the✎best✎quality✎HD✎picture.

Available✎devices:✎DVD,✎Blu-ray✎player,✎HD✎cable✎box,✎HD✎STB✎(Set-Top-Box)✎satellite✎receiver

✎✎

HDMI IN 1(DVI), 2, 3, 4,✎PC/DVI AUDIO IN

✎x

When✎using✎an✎HDMI/DVI✎cable✎connection,✎you✎m ust✎use✎the✎HDMI IN 1(DVI)✎jack✎for✎video.✎A✎DVD,✎Blu-ray✎

player,✎HD✎cable✎box,✎or✎HD✎STB✎satellite✎receiver✎may✎require✎a✎DVI-HDMI✎(DVI✎to✎HDM I)✎cable✎or✎DVI-HDMI✎

(DVI✎to✎HDMI)✎adapter.✎The✎PC/DVI AUDIO IN✎jack✎is✎required✎f or✎audio.

✎x

Be✎sure✎to✎use✎an✎HDMI✎cable✎with✎a✎thic kness✎of✎14✎mm✎or✎less.

✎x

The✎picture✎may✎not✎display✎normally✎(if✎at✎all)✎or✎the✎audio✎may✎not✎work✎if✎an✎exter nal✎de vice✎that✎uses✎an✎older✎

version✎of✎HDMI✎mode✎is✎connected✎to✎the✎TV.✎If✎such✎a✎problem✎occurs,✎ask✎the✎manufacturer✎of✎the✎external✎

device✎about✎the✎HDMI✎version✎and,✎if✎out✎of✎date,✎request✎an✎upgra de.

✎x

Be✎sure✎to✎purchase✎a✎certified✎HDMI✎cable.✎Otherwise,✎the✎picture✎may✎not✎display✎or✎a✎connection✎error✎may✎

occur.

Using a Component (up to 1080p) or Audio/Video (480i only) Cable

Available✎devices:✎DVD,✎Blu-ray✎player,✎cable✎box,✎STB✎satellite✎receiver,✎VCR

✎✎

When✎connecting✎to✎AV IN,✎the✎color✎of✎the✎AV IN [Y/VIDEO]✎jack✎(green)✎will✎not✎match✎the✎video✎cable✎(yellow).

✎✎

To✎obtain✎the✎best✎picture✎quality,✎the✎Component✎connection✎is✎recommended✎over✎the✎A/V✎connection.

HDMI OUT

DVI OUT

AUDIO OUT

R-AUDIO-L

WR

W R

Device

Red White

HDMI Cable (Not Supplied)

HDMI to DVI Cable (Not Supplied)

Audio Cable (Not Supplied)

R

G

B W R

WR R GB

Y

W

R

W

R

AUDIO OUT

R-AUDIO-L

PR

PB Y

COMPONENT OUT

AUDIO OUT

R-AUDIO-L

VIDEO OUT

Y

W

R

G

B

WR

Device

Red White

Red White Yellow

Red Blue Green

Video Cable (Not Supplied)

Component Cable (Not Supplied)

Audio Cable (Not Supplied)

1_BN68-03165A-00Eng.indd 9 2010-06-29 오후 3:59:00

10

English

Connections

Connecting to an Audio Device

Using an Optical (Digital) or Audio (Analog) Cable Connection

Available devices: Digital Audio System, Ampliﬁer, DVD home theater

✎

DIGITAL AUDIO OUT (OPTICAL)

x

When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume

of both the TV and the system.

x

5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

x

When the receiver (amplifier or DVD home theater) is set to on, you can hear sound output from the TV’s

optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the amplifier or DVD

home theater. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB

(Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the

amplifier or DVD home theater. If you want to hear 5.1 CH audio, connect the digital audio out jack from your

DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater.

✎

AUDIO OUT: Connects to the audio input jacks on your amplifier / DVD home theater.

x

When connecting, use the appropriate connector.

x

When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the

volume level with the Amplifier’s volume control.

Using an EX-Link Cable Connection

Available Devices: External devices that support EX-Link

EX-LINK: Connector for service only.

R-AUDIO-L

AUDIO IN

OPTICAL

WR

Red White

Digital Audio System

Ampliﬁer / DVD home theater

Audio Cable (Not Supplied)

Optical Cable (Not Supplied)

[UC6300-Canada]BN68-03165B-00L02.indb 10 2010-06-22 오후 1:00:31

11

English

02 Connections

Connecting to a PC

Using an HDMI/DVI Cable or a D-sub Cable

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1920 X 1080 @ 60 Hz.

Mode Resolution

Horizontal Frequency

(KHz)

Vertical Frequency

(Hz)

Pixel Clock Frequency

(MHz)

Sync Polarity

(H / V)

IBM

640 x 350

720 x 400

31.469

70.086

70.087

25.175

28.322

+/-

-/+

MAC

640 x 480

832 x 624

1152 x 870

35.000

49.726

68.681

66.667

74.551

75.062

30.240

57.284

100.000

-/-

VESA CVT

720 x 576

1152 x 864

1280 x 720

1280 x 960

35.910

53.783

56.456

75.231

59.950

59.959

74.777

74.857

32.750

81.750

95.750

130.000

-/+

VESA DMT

640 x 480

800 x 600

1024 x 768

1152 x 864

1280 x 1024

1280 x 720

1280 x 800

1280 x 960

1360 x 768

1440 x 900

1680 x 1050

31.469

37.861

37.500

37.879

48.077

46.875

48.363

56.476

60.023

67.500

63.981

79.976

45.000

49.702

62.795

60.000

47.712

55.935

70.635

65.290

59.940

72.809

75.000

60.317

72.188

75.000

60.004

70.069

75.029

75.000

60.020

75.025

60.000

59.810

74.934

60.000

60.015

59.887

74.984

59.954

25.175

31.500

40.000

50.000

49.500

65.000

75.000

78.750

108.000

135.000

74.250

83.500

106.500

108.000

85.500

106.500

136.750

146.250

-/-

+/+

-/-

+/+

-/+

+/+

-/+

VESA GTF

1280 x 720

1280 x 1024

52.500

74.620

70.000

89.040

128.943

-/+

-/-

VESA DMT / DTV CEA

1920 x 1080p 67.500 60.000 148.500 +/+

✎

NOTE

x

For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

x

The interlace mode is not supported.

x

The set may operate abnormally if a non-standard video format is selected.

x

Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

AUDIO OUT

PC OUT

AUDIO OUT

PC OUT

HDMI to DVI Cable (Not Supplied)

D-Sub Cable (Not Supplied)

Audio Cable (Not Supplied)

[UC6300-Canada]BN68-03165B-00L02.indb 11 2010-06-22 오후 1:00:32

12

English

Connections

How to Navigate Menus

Before using the TV, follow the steps below to learn how to

navigate the menu and select and adjust different functions.

C

H LI

ST

M

U

T

E

PO

WE

R

SOU

RCE

P

RE-

C

H

O

N/

O

F

MENU

TOO

L

S

RETURN

S

.M

O

DE

P.M

O

D

E

MEDIA.P

F

AV.

C

H

P.SIZ

E

C

S

LEE

P

A

B

C

D

M

T

S

E

XI

T

INF

O

4

1

2

3

MENU

RETURN

EXIT

1 MENU button: Displays the main on-screen menu.

2 ENTER



/ Direction button: Move the cursor and

select an item. Conﬁrm the setting.

3 RETURN button: Returns to the previous menu.

4 EXIT button: Exits the on-screen menu.

How to Operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

1

MENU



The main menu options appear on

the screen:

Picture, Sound, Channel, Setup,

Input, Application, Support.

2

▲ / ▼ Select an icon with the ▲ or ▼

button.

3

ENTER



Press ENTER



to access the

sub-menu.

4

▲ / ▼

Select the desired submenu with

the ▲ or ▼ button.

5

◄ / ►

Adjust the value of an item with the

◄ or ► button. The adjustment in

the OSD may differ depending on

the selected menu.

6

ENTER



Press ENTER



to conﬁrm the

selection.

7

EXIT



Press EXIT.

Changing the Input Source

Source List

Use to select TV or an external input sources

such as a DVD / Blu-ray player / cable box /

STB satellite receiver.



MENU



→ Input → Source List →

ENTER



SOURCE

■ TV / AV / Component / PC / HDMI1/DVI / HDMI2 /

HDMI3 / HDMI4 / USB

✎

You can only choose external devices that

are connected to the TV. In the Source List,

connected inputs will be highlighted.

✎

In the Source List, PC is always activated.

Edit Name



MENU



→ Input → Edit Name → ENTER



■ VCR / DVD / Cable STB / Satellite STB / PVR STB /

AV Receiver / Game / Camcorder / PC / DVI PC /

DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:

Name the device connected to the input jacks to make

your input source selection easier.

✎

When a PC with a resolution of 1920 x 1080 @ 60Hz is

connected to the HDMI IN 1(DVI) port, you should set

the TV to DVI PC mode under Edit Name.

✎

When connecting an HDMI/DVI cable to the

HDMI IN 1(DVI) port, you should set the TV to DVI PC

or DVI Devices mode under Edit Name.

Basic Features

[UC6300-Canada]BN68-03165B-00L02.indb 12 2010-06-22 오후 1:00:33

13

English

03 Basic Features

Channel Menu

 Seeing Channels

Channel List

Add, delete or set Favorite channels and use

the program guide for digital broadcasts.



MENU



→ Channel → Channel List

→ ENTER



Select a channel in the All Channels,

Added Channels, Favorite or Programmed

screen by pressing the ▲ / ▼ and ENTER



buttons. Then you can watch the selected

channel.

CH LIST

■ All Channels: Shows all currently available channels.

■

Added Channels: Shows all added channels.

■



Favorite: Shows all favorite channels.

■

Programmed: Shows all currently reserved

programs.

✎

Using the color buttons with the Channel List

x

Red (Antenna): Switches to Air or Cable.

x

Green (Zoom): Enlarges or shrinks a channel

number.

x

Yellow (Select): Selects multiple channel lists.

Select desired channels and press the Yellow button

to set all the selected channels at the same time. The



mark appears to the left of the selected channels.

x



(Page): Move to next or previous page.

x



(Tools): Displays the Channel List option menu.

(The options menus may differ depending on the

situation.)

Channel Status Display Icons

Icons Operations



A channel selected.



A channel set as a Favorite.



A reserved Program.

 Using Favorite Channels



MENU



→ Channel → Channel List → ENTER



Add to Favorite / Delete from Favorite



Set channels you watch frequently as Favorites.

1. Select a channel and press the TOOLS button.

2. Add or delete a channel using the Add to Favorite or

Delete from Favorite menu respectively.

To show all Favorite channels, click on the

button shown on the right.

FAV.CH

 Memorizing Channels



MENU



→ Channel → ENTER



Antenna (Air / Cable)



Before your television can begin memorizing the available

channels, you must specify the type of signal source that is

connected to the TV (i.e. an Air or a Cable system).

Auto Program

■ Air: Air antenna signal.

■ Cable: Cable antenna signal.

■ Auto: Air and Cable antenna.

✎

NOTE

x

When selecting the Cable TV system: STD, HRC

and IRC identify various types of cable TV systems.

Contact your local cable company to identify the

type of cable system that exists in your particular

area. At this point, the signal source has been

selected.

6 Air

6-1 * TV #6

7 Air

8 Air

9 Air

9-1 * TV #9

10 Air

10-1 * TV #10

11-1 * TV #11

Air Antenna Zoom Select



Page



Tools

Added Channels

6 Air

6-1 * TV #6

7 Air

8 Air

9 Air

9-1 * TV #9

10 Air

10-1 * TV #10

11-1 * TV #11

Added Channels

Delete

Add to Favorite

Timer Viewing

Channel Name Edit

Select All

Air Antenna Zoom Select



Page



Tools

[UC6300-Canada]BN68-03165B-00L02.indb 13 2010-06-22 오후 1:00:35

14

English

Basic Features

x

After all the available channels are stored, it starts

to remove scrambled channels. The Auto Program

menu then reappears.

 Editing Channels



MENU



→ Channel → Channel List → ENTER



Channel Name Edit

1. Select a channel and press the TOOLS button.

2. Edit the channel name using the Channel Name Edit

menu.

■ Channel Name Edit (analog channels only): Assign your

own channel name.

 Other Features



MENU



→ Channel → ENTER



Clear Scrambled Channel

This function is used to ﬁlter out scrambled channels after

Auto Program is completed. This process may take up to

20~30 minutes.

How to Stop Searching Scrambled Channels

1. Press the ENTER



button to select Stop.

2. Press the ◄ button to select Yes.

3. Press the ENTER



button.

✎

This function is only available in Cable mode.

Channel List

Channel List Option Menu

Set each channel using the Channel List menu options (Add

/ Delete, Timer Viewing, Select All / Deselect All). Option

menu items may differ depending on the channel status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings.

■ Add / Delete: Delete or add a channel to display the

channels you want.

✎

NOTE

x

All deleted channels will be shown on the

All Channels menu.

x

A gray-colored channel indicates the channel

has been deleted.

x

The Add menu only appears for deleted

channels.

x

Delete a channel from the Added Channels or

Favorite menu in the same manner.

■ Timer Viewing: You can set a desired channel to be

displayed automatically at the reserved time. Set the

current time ﬁrst to use this function.

1. Press the ◄ / ► / ▲ / ▼ buttons to select the

desired channel in Channel List.

2. Press the TOOLS button, then select

Timer Viewing.

3. Scroll up or down to adjust the settings in the box,

or use the numeric buttons on your remote to enter

the date and time.

✎

If you selected Once, Every Week or

Everyday in Repeat, you can enter the date

you want.

4. Select OK, then press the ENTER



button when

done.

✎

NOTE

x

Only memorized channels can be reserved.

x

Reserved programs will be displayed in the

Programmed menu.

x

When a digital channel is selected, press the

► button to view the digital program.

■ Select All: Select all the channels in the channel list.

■ Deselect All: Deselect all the selected channels.

✎

You can only select Deselect All when one or

more channels are selected.

Programmed

(in Channel List)

You can view, modify or delete a show you have reserved

to watch. Programmed timer viewing is displayed here.

Highlight a program and press the TOOLS button to display

Options.

■ Change Info: Change a show you have reserved to

watch. Begin with step 3 of “Timer Viewing,” above.

■ Cancel Schedules: Cancel a show you have reserved

to watch.

✎

This deletes the highlighted or selected

program(s).

■ Information: Display a show you have reserved

to watch. (You can also change the reservation

Information.)

✎

Alternatively, you can view Information by

highlighting a program and pressing the

ENTER



button.

■ Select All / Deselect All: Select or deselect all reserved

programs.

[UC6300-Canada]BN68-03165B-00L02.indb 14 2010-06-22 오후 1:00:35

15

English

03 Basic Features

Fine Tune

(analog channels only)

If the reception is clear, you do not have to ﬁne tune the

channel, as this is done automatically during the search and

store operation. If the signal is weak or distorted, ﬁne tune

the channel manually. Scroll to the left or right until the image

is clear.

✎

Settings are applied to the channel you're currently

watching.

✎

Fine tuned channels that have been saved are marked

with an asterisk “*” on the right-hand side of the

channel number in the channel banner.

✎

To reset the fine-tuning, select Reset.

Picture Menu

 Changing the Preset Picture Mode



MENU



→ Picture → Mode → ENTER



Mode

Select your preferred picture type.

■ Dynamic: Suitable for a bright room.

■ Standard: Suitable for a normal

environment.

■ Natural: Suitable for reducing eye strain.

✎

Natural is not available in PC mode.

■ Movie: Suitable for watching movies in a dark room.

 Adjusting Picture Settings



MENU



→ Picture → ENTER



Backlight / Contrast / Brightness /

Sharpness / Color / Tint (G/R)

Your television has several setting options for picture quality

control.

✎

NOTE

x

When you make changes to Backlight, Contrast,

Brightness, Sharpness, Color or Tint (G/R) the

OSD will be adjusted accordingly.

x

In PC mode, you can only make changes to

Backlight, Contrast and Brightness.

x

Settings can be adjusted and stored for each

external device connected to the TV.

 Economical Solutions

The Eco Function can be used to enhance your power

savings.

Eco Solution



MENU



→ Picture → Eco Solution → ENTER



■ Energy Saving (Off / Low / Medium / High / Picture

Off / Auto): This adjusts the brightness of the TV in

order to reduce power consumption. If you select

Picture Off, the screen is turned off , but the sound

remains on. Press any button except the volume button

to turn on the screen.

■ Eco Sensor (Off / On): To enhance your power savings;

the picture settings will automatically adapt to the light

in the room.

✎

If you adjust the Backlight, the Eco Sensor will

be set to Off.

Min Backlight: When Eco sensor is On, the minimum

screen brightness can be adjusted manually.

✎

If Eco Sensor is On, the display brightness

may change (become slightly darker or brighter)

depending on the surrounding light intensity.

■ No Signal Power Off (Off / 15 min. / 30 min. / 60

min.): To avoid unnecessary energy consumption,

set how long you want the TV to remain on if it's not

receiving a signal.

✎

Disabled when the PC is in power saving mode.

 Changing the Picture Options

Advanced Settings



MENU



→ Picture → Advanced Settings →

ENTER



(Advanced Settings are available in Standard / Movie mode)

Compared to previous models, new Samsung TVs have a

more precise picture.

✎

In PC mode, you can only make changes to

Dynamic Contrast, Gamma, White Balance and

LED Motion Plus.

P.MODE

Advanced Settings

Black Tone : Off ►

Dynamic Contrast : Medium

Shadow Detail : -2

Gamma : 0

Expert Pattern : Off

RGB Only Mode : Off

Color Space : Native

▼



Move



Enter



Return

[UC6300-Canada]BN68-03165B-00L02.indb 15 2010-06-22 오후 1:00:36

16

English

Basic Features

■ Black Tone (Off / Dark / Darker / Darkest): Select the

black level to adjust the screen depth.

■ Dynamic Contrast (Off / Low / Medium / High): Adjust

the screen contrast.

■ Shadow Detail (-2~+2): Increase the brightness of dark

images.

■ Gamma: Adjust the primary color intensity.

■ Expert Pattern (Off / Pattern1 / Pattern2): By

running the Expert Pattern function, the picture can

be calibrated. If the OSD menu disappears or a menu

other than the Picture menu is opened, the calibration is

saved and the Expert Pattern window disappears.

Off: Turns the Expert Pattern function off.

Pattern1: This is a test screen designed to demonstrate

the affects of display settings on shades.

Pattern2: This is a test screen designed to demonstrate

the affects of display settings on colors.

✎

After selecting Pattern1 or Pattern2, you can

adjust any of the advanced settings to the desired

effect.

✎

While the Expert Pattern is running, sound is not

output.

✎

Only enabled in DTV, Component and HDMI

modes.

■ RGB Only Mode (Off / Red / Green / Blue): Displays

the Red, Green and Blue color for making ﬁne

adjustments to the hue and saturation.

■ Color Space (Auto / Native / Custom): Adjust the

range of colors available to create the image. To adjust

Color, Red, Green, Blue and Reset, set Color Space

to Custom.

■ White Balance: Adjust the color temperature for a more

natural picture.

R-Offset / G-Offset / B-Offset: Adjust each color's

(red, green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjust each color's (red,

green, blue) brightness.

Reset: Resets the White Balance to it's default

settings.

■ 10p White Balance (Off / On): Controls the white

balance in 10 point intervals by adjusting the red, green,

and blue brightness.

✎

Available when the picture mode is set to Movie

and when the external input is set to all input.

✎

Some external devices may not support this

function.

Interval: Select interval to adjust.

Red: Adjust the red level.

Green: Adjust the green level.

Blue: Adjust the blue level.

Reset: Resets the 10p White Balance to its default

settings.

■ Flesh Tone: Emphasize pink “Flesh Tone.”

■ Edge Enhancement (Off / On): Emphasize object

boundaries.

■ xvYCC (Off / On): Setting the xvYCC mode on

increases detail and color space when watching movies

from an external device (e.g. BD/DVD player) connected

to the HDMI or Component IN jacks.

✎

Available when the picture mode is set to Movie

and when the external input is set to HDMI or

Component.

✎

Some external devices may not support this

function.

■ LED Motion Plus (Off / On): Removes drag from fast

scenes with a lot of movement to provide a clear picture.

Picture Options



MENU



→ Picture → Picture Options →

ENTER



✎

In PC mode, you can only make changes to the

Color Tone, Size and Auto Protection Time.

■ Color Tone (Cool / Normal / Warm1 / Warm2)

✎

Warm1 or Warm2 will be deactivated when the picture

mode is Dynamic.

✎

Settings can be adjusted and stored for each external

device connected to an input on the TV.

■ Size: Your cable box/satellite receiver

may have its own set of screen sizes as

well. However, we highly recommend you

use 16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide mode.

Zoom1: Use for moderate magniﬁcation.

P.SIZE

Zoom2: Use for a stronger magniﬁcation.

Wide Fit: Enlarges the aspect ratio of the picture to ﬁt

the entire screen.

✎

Available with HD 1080i / 720p signals in 16:9

mode.

Picture Options

Color Tone : Normal ►

Size : 16:9

Digital Noise Filter : Auto

MPEG Noise Filter : Auto

HDMI Black Level : Normal

Film Mode : Off

Auto Motion Plus : Standard

▼



Move



Enter



Return

[UC6300-Canada]BN68-03165B-00L02.indb 16 2010-06-22 오후 1:00:36

17

English

03 Basic Features

4:3: Sets the picture to basic (4:3) mode.

✎

Do not watch in 4:3 format for a long time. Traces

of borders displayed on the left, right and center

of the screen may cause image retention (screen

burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off

when HDMI (720p / 1080i / 1080p) or Component

(1080i / 1080p) signals are inputted.

✎

NOTE

x

After selecting Zoom1, Zoom2 or Wide Fit:

1. Press the ► button to select Position.

2. Press the ENTER



button.

3. Press the ▲ or ▼ button to move the picture up

or down.

4. Press the ENTER



button.

5. Press the ► button to select Reset.

6. Press the ENTER



button to reset the picture

to its default position.

x

After selecting Screen Fit in HDMI (1080i/1080p) or

Component (1080i/1080p) mode, you may need to

center the picture:

1. Press the ◄ or ► button to select Position.

2. Press the ENTER



button.

3. Press the ▲, ▼, ◄ or ► button to move the

picture.

4. Press the ENTER



button.

5. Press the ◄ or ► button to select Reset.

6. Press the ENTER



button.

x

HD (High Definition): 16:9 - 1080i/1080p (1920x1080),

720p (1280x720)

x

Settings can be adjusted and stored for each

external device you have connected to an input on

the TV.

Input Source Picture Size

ATV, AV,

Component (480i, 480p)

16:9, Zoom1,

Zoom2, 4:3

DTV(1080i),

Component (1080i, 1080p),

HDMI (720p, 1080i, 1080p)

16:9, 4:3, Wide Fit,

Screen Fit

PC 16:9, 4:3

■ Digital Noise Filter (Off / Low / Medium / High / Auto

/ Auto Visualization): If the broadcast signal received by

your TV is weak, you can activate the

Digital Noise Filter feature to reduce any static and

ghosting that may appear on the screen.

✎

When the signal is weak, try other options until the

best picture is displayed.

Auto Visualization: When changing analog channels,

displays signal strength.

✎

Only available for analog channels.

✎

When bar is green, that is the best possible signal.

■ MPEG Noise Filter (Off / Low / Medium / High /

Auto): Reduces MPEG noise to provide improved

picture quality.

■ HDMI Black Level (Normal / Low): Selects the black

level on the screen to adjust the screen depth.

✎

Available only in HDMI mode.

■ Film Mode (Off / Auto1 / Auto2): Sets the TV to

automatically sense and process ﬁlm signals from all

sources and adjusts the picture for optimum quality.

✎

Available in TV, AV, COMPONENT (480i / 1080i)

and HDMI (480i / 1080i).

■ Auto Motion Plus (Off / Clear / Standard / Smooth /

Custom / Demo): Removes drag from fast scenes with

a lot of movement to provide a clearer picture.

✎

The info screen on your TV displays the resolution

and frequency of the incoming video signal (60

Hz). This displayed frequency is not what the

TV is displaying by using the Auto Motion Plus

function.

✎

If noise occurs on the screen, please set the

Auto Motion Plus to Off. If Auto Motion Plus is

Custom, you can set the Blur Reduction, Judder

Reduction or Reset manually.

✎

If Auto Motion Plus is Demo, you can compare

the difference between on and off modes.

Blur Reduction: Adjusts the blur reduction level from

video sources.

Judder Reduction: Adjusts the judder reduction level

from video sources when playing ﬁlms.

Reset: Reset the custom settings.

■ Auto Protection Time (2 hours / 4 hours / 8 hours

/ 10 hours / Off): Set the time the screen remains idle

with a still image until the screen saver is activated. The

screen saver prevents the formation of ghost images on

the screen.

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

 Setting up the TV with Your PC

Set the input source to PC.



MENU



→ Picture → ENTER



Auto Adjustment



Adjust frequency values/positions and ﬁne tune the settings

automatically.

✎

Not available when connecting with an HDMI/DVI cable.

[UC6300-Canada]BN68-03165B-00L02.indb 17 2010-06-22 오후 1:00:37

18

English

Basic Features

Screen

■ Coarse / Fine: Removes or reduces picture noise. If the

noise is not removed by Fine-tuning alone, then adjust

the frequency as best as possible (Coarse) and Fine-

tune again. After the noise has been reduced, readjust

the picture so that it is aligned to the center of screen.

■ Position: Adjust the PC’s screen positioning if it does

not ﬁt the TV screen. Press the ▲ or ▼ button to adjust

the Vertical-Position. Press the ◄ or ► button to adjust

the Horizontal-Position.

■ Image Reset: Resets the image to default settings.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

Depending on the version of Windows and the video card,

the actual screens on your PC will probably look different, but

the same basic set-up information will apply in most cases.

(If not, contact your computer manufacturer or Samsung

Dealer.)

1. Click on “Control Panel” on the Windows start menu.

2. Click on “Appearance and Themes” in the “Control

Panel” window and a display dialog-box will appear.

3. Click on “Display” and a display dialog box will appear.

4. Navigate to the “Settings” tab on the display dialog-box.

y The correct size setting (resolution) [Optimum: 1920 X

1080 pixels]

y If a vertical-frequency option exists on your display

settings dialog box, the correct value is ‘60’ or ‘60 Hz’.

Otherwise, just click ‘OK’ and exit the dialog box.

Sound Menu

 Changing the Preset Sound Mode



MENU



→ Sound → SRS TheaterSound →

ENTER



SRS TheaterSound

■ Standard: Selects the normal sound

mode.

■ Music: Emphasizes music over voices.

■ Movie: Provides the best sound for

movies.

■ Clear Voice: Emphasizes voices over

other sounds.

■ Amplify: Increase the intensity of high-frequency sound

to allow a better listening experience for the hearing

impaired.

 Adjusting Sound Settings



MENU



→ Sound → Equalizer → ENTER



Equalizer

Adjusts the sound mode (standard sound mode only).

■ Balance L/R: Adjusts the balance between the right and

left speaker.

■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth

Adjustment): Adjusts the level of speciﬁc bandwidth

frequencies.

■ Reset: Resets the equalizer to its default settings.

 Sound Settings



MENU



→ Sound → ENTER



SRS TruSurround HD (Off / On)



(standard sound mode only)

This function provides a virtual 5.1 channel surround sound

experience through a pair of speakers using HRTF (Head

Related Transfer Function) technology.

SRS TruDialog (Off / On)

(standard sound mode only)

This function allows you to increase the intensity of a voice

over background music or sound effects so that dialog can

be heard more clearly.

Preferred Language

(digital channels only)

Digital-TV broadcasts are capable of

simultaneous transmission of many audio

tracks (for example, simultaneous translations

of the program into foreign languages).

✎

You can only select a language among

the ones being broadcasted.

MTS

S.MODE

[UC6300-Canada]BN68-03165B-00L02.indb 18 2010-06-22 오후 1:00:37

19

English

03 Basic Features

Multi-Track Sound (MTS)



(analog channels only)

■ Mono: Choose for channels that are

broadcasting in mono or if you are having

difﬁculty receiving a stereo signal.

■ Stereo: Choose for channels that are

broadcasting in stereo.

MTS

■ SAP: Choose to listen to the Separate Audio Program,

which is usually a foreign-language translation.

✎

Depending on the particular program being broadcast,

you can listen to Mono, Stereo or SAP.

Auto Volume (Off / Normal / Night)

To equalize the volume level on each channel, set to Normal.

■ Night: This mode provides an improved sound

experience compared to Normal mode, making almost

no noise. It is useful at night.

Speaker Select (External Speaker /

TV Speaker)

A sound echo may occur due to a difference in decoding

speed between the main speaker and the audio receiver. In

this case, set the TV to External Speaker.

✎

When Speaker Select is set to External Speaker, the

volume and MUTE buttons will not operate and the

sound settings will be limited.

✎

When Speaker Select is set to External Speaker

x

TV Speaker: Off , External Speaker: On

✎

When Speaker Select is set to TV Speaker

x

TV Speaker: On , External Speaker: On

✎

If there is no video signal, both speakers will be mute.

SPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital

sound, reducing interference going to speakers and various

digital devices such as an A/V Receiver/Home theater.

■ Audio Format: During the reception of a digital TV

broadcast, you can select the Digital Audio output

(SPDIF) format from the options PCM or Dolby Digital.

■ Audio Delay: Correct audio-video sync problems, when

watching TV or video, and when listening to digital audio

output using an external device such as an AV receiver

(0ms ~ 250ms).

Sound Reset (OK / Cancel)

Reset all sound settings to the factory defaults.

Setup Menu

 Setting the Time



MENU



→ Setup → Time → ENTER



Time

■ Clock: Setting the clock is for using various timer

features of the TV.



The current time will appear every time you press

the INFO button.

✎

If you disconnect the power cord, you have to set

the clock again.

Clock Mode (Auto / Manual)

– Auto: Set the current time automatically using the

time from a digital channel.

✎

The antenna must be connected in order to set

the time automatically.

– Manual: Set the current time manually.

✎

Depending on the broadcast station and signal,

the auto time set up may not be correct. In this

case, set the time manually.

Clock Set: Set the Month, Day, Year, Hour, Minute and

am/pm manually.

✎

Available only when Clock Mode is set to

Manual.

✎

You can set the Month, Day, Year, Hour and

Minute directly by pressing the number buttons

on the remote control.

DST (Daylight Saving Time) (Off / On): Switches the

Daylight Saving Time function on or off.

✎

This function is only available when the Clock

Mode is set to Auto.

Time Zone: Select your time zone.

✎

This function is only available when the Clock

Mode is set to Auto.

 Using the Sleep Timer



MENU



→ Setup → Time → Sleep Timer →

ENTER



■ Sleep Timer: Automatically shuts off the

TV after a preset period of time (30, 60,

90, 120, 150 and 180 minutes).

✎

To cancel the Sleep Timer, select

Off.

SLEEP

[UC6300-Canada]BN68-03165B-00L02.indb 19 2010-06-22 오후 1:00:38

20

English

Basic Features

 Setting the On / Off Timer



MENU



→ Setup → Time → Timer 1 →

ENTER



You can set the TV to turn on automatically at a preset time.

■ Timer 1 / Timer 2 / Timer 3: Three different on / off

timer settings can be made. You must set the clock ﬁrst.

On Time / Off Time: Set the hour, minute, and activate

/ inactivate. (To activate the timer with the setting you’ve

chosen, set to Activate.)

Volume: Set the desired volume level.

Source: Select TV or USB content to be played when

the TV is turned on automatically. (USB can be selected

only when a USB device is connected to the TV)

Antenna (when the Source is set to TV): Select Air or

Cable.

Channel (when the Source is set to TV): Select the

desired channel.

Contents (when the Source is set to USB): Select a

folder in the USB device containing music or photo ﬁles

to be played when the TV is turned on automatically.

✎

NOTE

x

If there is no music file on the USB device or the

folder containing a music file is not selected, the

Timer function does not operate correctly.

x

When there is only one photo file in the USB,

the Slide Show will not play.

x

If a folder name is too long, the folder cannot be

selected.

x

Each USB you use is assigned its own folder.

When using more than one of the same type of

USB, make sure the folders assigned to each

USB have different names.

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,

Sat~Sun or Manual to set at you convenience. If you

select Manual, you can set up the day you want to

activate the timer.

✎

The



mark indicates the day is selected.

✎

Auto Power Off (available only when the TV is turned

on by the Timer): The TV will be automatically turned off

after 3 hours of being left idle to prevent overheating.

 Locking Programs



MENU



→ Setup → Security → ENTER



Security

■ V-Chip: The V-Chip feature automatically locks out

programs that are deemed inappropriate for children.

The user must enter a PIN (personal identiﬁcation

number) before any of the V-Chip restrictions are set up

or changed.

✎

NOTE

x

V-Chip is not available in HDMI, Component

or PC mode.

x

The default PIN number of a new TV set is

“0-0-0-0”.

x

Allow All: Press to unlock all TV ratings.

x

Block All: Press to lock all TV ratings.

V-Chip Lock (Off / On): You can block rated TV

Programs.

TV Parental Guidelines: You can block TV programs

depending on their rating. This function allows you to

control what your children are watching.

– TV-Y: Young children / TV-Y7: Children 7 and over /

TV-G: General audience / TV-PG: Parental guidance

/ TV-14: Viewers 14 and over / TV-MA: Mature

audience

– ALL: Lock all TV ratings. / FV: Fantasy violence /

V: Violence / S: Sexual situation / L: Adult Language /

D: Sexually Suggestive Dialog

✎

The V-Chip will automatically block certain

categories dealing with more sensitive material.

For example, if you block the TV-Y category,

then TV-Y7 will automatically be blocked.

Similarly, if you block the TV-G category, then

all the categories in the young adult group will

be blocked (TV-G, TV-PG, TV-14 and TV-MA).

The sub-ratings (D, L, S, V) work similarly. So,

if you block the L sub-rating in TV-PG, then

the L sub-ratings in TV-14 and TV-MA will

automatically be blocked.

MPAA Rating: You can block movies depending on

their MPAA rating. The Motion Picture Association of

America(MPAA) has implemented a rating system that

provides parents or guardians with advanced information

on which ﬁlms are appropriate for children.

– G: General audience (no restrictions). / PG: Parental

guidance suggested. / PG-13: Parents strongly

cautioned. / R: Restricted. Children under 17 should

be accompanied by an adult. / NC-17: No children

under age 17. / X: Adults only. / NR: Not rated.

20 TV Cable 1

00 00 am

▲

▼

Timer 1

On Time

Off Time

Volume

Inactivate

Sun Mon Tue Wed Thu Fri Sat

Once

Source Antenna Channel

Repeat



Move

Adjust 

Enter



Return

[UC6300-Canada]BN68-03165B-00L02.indb 20 2010-06-22 오후 1:00:38

La page charge ...

Samsung UN40C6300 Manuel utilisateur

Ce manuel convient également à

Samsung UN40C6300 Manuel utilisateur

dans d''autres langues

Documents connexes