Samsung UN26C4000 Le manuel du propriétaire

Catégorie
Téléviseurs LCD
Taper
Le manuel du propriétaire
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
BN68-02624B-02
LED TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model _____________ Serial No. _____________
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
Comment contacter Samsung dans le monde
Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs
Samsung.
Country
Customer Care Center
Web Site
Address
CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga, Ontario
L5R 4B2 Canada
Samsung Electronique Canada Inc., Service à la
Clientèle 55 Standish Court Mississauga, Ontario
L5R 4B2 Canada
U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us Samsung Electronics America, Inc.
105 Challenger Road
Ridgeeld Park, NJ 07660-0511
[UC400019-Canada]BN68-02624B-02L02.indb 1 2010-03-12 오후 4:47:06
2
English
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
See the warranty card for more information on warranty terms.
Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.
The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and
the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on no expanded standard format
television video and programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics
and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven
aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and
primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to
view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LED aging as a result of format selection and use, as well as burned
in images, are not covered by your Samsung limited warranty.
SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG)
products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service
in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the
warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited
Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service
Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those
encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or
replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
– In the United States : 1-800-SAMSUNG (1-800-726-7864)
– In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news
bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause uneven wear of the screen, which will affect image quality. To
reduce risk of this effect, please follow below recommendations:
Avoid displaying the same TV channel for long periods.
Always try to display a full screen image.
Reducing brightness and contrast will help to avoid the appearance of after-images.
Use all TV features designed to reduce image retention and screen burn, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
x
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
The appearance may differ depending on the product.
Installation with a stand. Installation with a wall-mount.
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
[UC400019-Canada]BN68-02624B-02L02.indb 2 2010-03-12 오후 4:47:06
3
Contents
ENGLISH
English
Getting Started
y List of Features ......................................................... 4
y Accessories .............................................................. 4
y Install the Stand
(UN19C4000, UN22C4000) ...................................... 5
y Install the Stand (UN26C4000) .................................. 5
y Viewing the Control Panel ......................................... 6
y Viewing the Remote Control ...................................... 7
y Connecting to an Antenna ........................................ 8
y Plug & Play (Initial Setup) ........................................... 8
Connections
y Connecting to an AV Device ...................................... 9
y Connecting to an Audio Device ............................... 10
y Connecting to a PC ................................................ 11
y Changing the Input Source ..................................... 12
Basic Features
y How to Navigate Menus .......................................... 12
y Channel Menu ........................................................ 13
Seeing Channels 13
Using Favorite Channels 13
Memorizing channels 14
Editing Channels 14
Other Features 14
y Picture Menu .......................................................... 15
Changing the Preset Picture Mode 15
Adjusting Picture Settings 15
Economical Solutions 16
Changing the Picture Options 16
Setting up the TV with Your PC 18
y Sound Menu ........................................................... 18
Changing the Preset Sound Mode 18
Adjusting Sound Settings 18
Sound Settings 18
y Setup Menu ............................................................ 19
Setting the Time 19
Using the Sleep Timer 20
Setting the On / Off Timer 20
Locking Programs 20
Other Features 22
Picture In Picture (PIP) 23
y Support Menu ......................................................... 23
Advanced Features
y Media Play .............................................................. 25
Connecting a USB Device 25
Screen Display 26
Playing Multiple Files 29
Media Play - Additional Functions 29
y Anynet+ ................................................................. 31
Setting Up Anynet+ 32
Switching between Anynet+ Devices 32
Recording 32
Listening through a Receiver 33
Troubleshooting for Anynet+ 33
Other Information
y Assembling the Cables ........................................... 34
y Installing the Wall Mount ......................................... 34
y Anti-theft Kensington Lock ...................................... 36
y Securing the TV to the Wall ..................................... 36
To Avoid the TV from Falling 36
y Troubleshooting ...................................................... 37
y License ................................................................... 39
y Specifications ......................................................... 40
y Dimensions ............................................................. 41
y Index ...................................................................... 42
Check the Symbol!
This function can be used by pressing the
TOOLS button on the remote control.
Note
Indicates additional information.
Step by Step Guide
Check here for instructions on how to open
the relevant submenu within the OSD (on
screen display).
TOOLS
[UC400019-Canada]BN68-02624B-02L02.indb 3 2010-03-12 오후 4:47:07
4
Getting Started
English
Getting Started
List of Features
y Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed
without a cable box / STB (Set-Top-Box) satellite receiver (Set-Top Box).
y Media Play: Allows you to play music files, pictures, and movies saved on a USB device (p. 25).
y Self Diagnosis: You can check to make sure picture and sound operate normally (p. 23).
Accessories
Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
The items' colors and shapes may vary depending on the models.
y Remote Control (BN59-00996A) & Batteries (AAA x 2)
y Owner’s Instructions
y Warranty Card / Safety Guide / Quick Setup Guide
y Cleaning Cloth (BN63-01798B)
y Power Cord (3903-000527)
Blanking Bracket (BN63-06542B) Cable Tie
(26 inch model Only) (BN61-05596A)
Holder-Wire stand
(BN61-05596A)
(26 inch model Only)
Holder-Wire (3EA)
(BN61-05373A)
(26 inch model Only)
Holder-Ring (4EA)
BN61-05280A
(26 inch model Only)
For best cable connection to this product, be sure to use cables with a maximum thickness as below:
y Maximum thickness - 0.55 inches (14mm)
Input Cables (Sold Separately)
HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA
(M4 X L8)
[UC400019-Canada]BN68-02624B-02L02.indb 4 2010-03-12 오후 4:47:09
5
01 Getting Started
English
Install the Stand (UN19C4000, UN22C4000)
See separate guide for installing the stand.
Stand Base Stand Body
Follow the steps below to connect the TV to the stand.
RELEASE
LOCK
ELEASE
SE
LOC
RELEA
1. Insert the stand body into the
stand base.
2. Screw the stand base to the stand
body.
3. Slide the TV onto the stand body.
NOTE
x
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x
Lay the product down, with the screen facing up and fasten the screws.
Install the Stand (UN26C4000)
See separate guide for installing the stand.
s
s
s
s
s
Stand (1EA) Guide Stand (1EA) Screws (10EA)
Follow the steps below to connect the TV to the stand.
s
s
s
s
s
1
s
s
s
s
s
2
1. Connect the Guide Stand to the Stand
using four screws (M4 X L12) as shown.
2. With your TV upright,
connect the TV to the Stand
as shown.
3. Fasten two screws (M4 X
L8) at position 1, and then
fasten three screws (M4 X
L8) at position 2.
NOTE
x
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x
Make sure that at least two persons lift and move the LED TV.
x
Stand the product up and fasten the screws. If you fasten the screws with the LED TV placed down, it may lean to
one side.
s
s
s
s
s
Top view
Rear
Guide Stand
Screws (M4 X L12)
Stand
(A)
(B)
5EA (M4 X L12)
5EA (M4 X L8)
[UC400019-Canada]BN68-02624B-02L02.indb 5 2010-03-12 오후 4:47:13
6
Getting Started
English
Viewing the Control Panel
The product color and shape may vary depending on the model.
Remote control sensor Aim the remote control towards this spot on the TV.
SOURCE
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTER
button on the remote control.
MENU Displays an on-screen menu, the OSD (on screen display) of your TV’s features.
Adjusts the volume. In the OSD, use the
buttons as you would use the
and buttons on the remote control.
Changes the channels. In the OSD, use the
buttons as you would use the
and buttons on the remote control.
(Power)
Turns the TV on or off.
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
Remote control sensor
Power Indicator
Speakers
[UC400019-Canada]BN68-02624B-02L02.indb 6 2010-03-12 오후 4:47:13
7
01 Getting Started
English
Viewing the Remote Control
This is a special remote control for the visually impaired and has Braille points on the Power, Channel and Volume
buttons.
Installing batteries (Battery size: AAA)
NOTE
x
Use the remote control within 23 feet from the TV.
x
Bright light may affect the performance of the remote
control. Avoid use when nearby fluorescent lights or neon
signs.
x
The color and shape may vary depending on the model.
FAV.CH
CHLIST
TOOLS
POWER SOURCE
PRE-CH
RETURN
S.MODE
MEDIA.P
P.MODE
P.SIZE
CC
SLEEP
A B C D
MTS
EXIT
INFO
MENU
HDMI
Turns the TV on and off
Returns to the previous channel.
Cuts off the sound temporarily.
Displays the channel list on the screen
(p. 13).
Changes channels.
Displays and selects the available video
sources (p. 12).
Displays Favorite Channel Lists on the
screen (p. 13).
Displays information on the TV screen.
Selects the on-screen menu items and
changes the values seen on the menu.
Exits the menu.
S.MODE: Press to select the sound
mode (p. 18).
SLEEP: Automatically shuts off the TV at
a preset time (p. 20).
MTS: Press to choose stereo, mono
or Separate Audio Program (SAP
broadcast) (p. 19).
P.MODE: Press to select the picture
mode (p. 15).
P.SIZE: Selects the picture size (p. 17).
CC: Controls the caption decoder (p.
22).
Press to directly access channels.
Press to select additional channels
(digital) being broadcasted by the same
station. For example, to select channel
"54-3", press "54", then press" - "and
"3".
Adjusts the volume.
Brings up the OSD.
Displays Media Play (p. 25).
Quickly select frequently used functions.
Returns to the previous menu.
Buttons used in the Channel list,
Media Play menu, etc.
Use these buttons in Media Play and
Anynet+ modes (p. 25, 31).
(
: Controls recording for Samsung
recorders that have the Anynet+ feature)
Selects the HDMI mode directly.
[UC400019-Canada]BN68-02624B-02L02.indb 7 2010-03-12 오후 4:47:14
8
Getting Started
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and antenna.
If the size of the cable mold part was an abnormal shape, the part may not be connected to the input port properly.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the Red button.
1
Selecting a language
Press the or button, then press the ENTER
button.
Select the desired OSD (On Screen Display) language.
P
POWER
2
Selecting Store Demo
or Home Use
Press the or button, then press the ENTER
button.
y Select the Home Use mode. Store Demo Mode is for retail
environments.
y To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you
see the volume OSD, press and hold MENU for 5 sec.
3
Selecting an antenna
Press the or button, then press the ENTER
button. Select Air, Cable or Auto.
4
Selecting a channel
Press the or button, then press the ENTER
button. Select the channel source
to memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel Auto Program
(p. 14).
Press the ENTER
button at any time to interrupt the memorisation process.
5
Setting the Clock
Mode
Set the Clock Mode automatically or manually.
y Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
y Manual: Allows you to manually set the current date and time.
(p. 19).
6
Viewing the HD
Connection Guide.
y The connection method for the best HD screen quality is displayed.
7
Enjoy your TV.
Press the ENTER
button.
If You Want to Reset This Feature...
MENU
Setup Plug & Play ENTER
Power Input
ANT OUT
VHF/UHF Antenna
or
Cable
[UC400019-Canada]BN68-02624B-02L02.indb 8 2010-03-12 오후 4:47:15
9
English
02 Connections
Connections
Connecting to an AV Device
Using an HDMI or HDMI/DVI cable: HD connection (up to 1080p)
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver
HDMI IN 1(DVI), 2, PC/DVI AUDIO IN
x
When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack for video. A DVD, Blu-ray
player, HD cable box, or HD STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable or DVI-HDMI (DVI
to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.
x
If an external device such as a DVD / Blu-ray player / HD cable box / HD STB satellite receiver supporting
HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound
/ annoying flicker / abnormal color).
x
If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you
suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and
request an upgrade.
x
It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a
connection error may occur.
Using a Component (up to 1080p) or Audio/Video (480i only) Cable
Available devices: Digital Audio System, Amplifier, Home Theater
COMPONENT IN / AV IN: When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (green) will not
match the video cable (yellow).
For better picture quality, the Component connection is recomended over the A/V connection.
If the size of the cable mold part was an abnormal shape, the part may not be connected to the input port
properly.
R
G
B W R
WR R GB
Y
Y
W
R
W
R
AUDIO OUT
R-AUDIO-L
PR
PB Y
COMPONENT OUT
AUDIO OUT
R-AUDIO-L
VIDEO OUT
Y
W
R
R
G
BWR
Red RedRedWhite BlueWhiteYellow Green
HDMI OUT
DVI OUT
AUDIO OUT
R-AUDIO-L
WR
Device Device
Device
Red White
Device
[UC400019-Canada]BN68-02624B-02L02.indb 9 2010-03-12 오후 4:47:16
10
English
Connections
Connecting to an Audio Device
Using an Optical (Digital) or Audio (Analog) Cable or Headphone Connection
Available devices: Digital Audio System, Amplifier, DVD Home Theater
DIGITAL AUDIO OUT (OPTICAL)
x
When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
of both the TV and the system.
x
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x
When the receiver amplifier or DVD home theater is set to on, you can hear sound output from the TV’s optical
jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the amplifier or DVD home
theater. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-
Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the amplifier or
DVD home theater. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray
player / cable box / STB satellite receiver directly to an amplifier or home theater.
HEADPHONE
: You can connect your headphones to the headphones output on your set. While the
headphones are connected, the sound from the built-in speakers will be disabled.
x
Sound function may be restricted when connecting headphones to the TV.
x
Headphone volume and TV volume are adjusted separately.
AUDIO OUT: Connects to the audio input jacks on your amplifier/home theater.
x
When connecting, use the appropriate connector.
x
When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the
volume level with the amplifier’s volume control.
UN19C4000, UN22C4000
UN26C4000
OPTICAL
OPTICAL
R-AUDIO-L
AUDIO IN
WR
Digital Audio System
Digital Audio System
Amplifier /
DVD home theater
Red White
[UC400019-Canada]BN68-02624B-02L02.indb 10 2010-03-12 오후 4:47:17
11
English
02 Connections
Using an EX-Link Cable Connection
Available Devices: External devices that support EX-Link
EX-LINK: Connector for service only.
Connecting to a PC
Using an HDMI/DVI cable or a D-sub cable
AUDIO OUT
DVI OUT
AUDIO OUT
PC OUT
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1360 x 768 @ 60 Hz.
Mode Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-
-/+
MAC
640 x 480
832 x 624
35.000
49.726
66.667
74.551
30.240
57.284
-/-
-/-
VESA CVT
720 x 576
1280 x 720
35.910
56.456
59.950
74.777
32.750
95.750
-/+
-/+
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 720
1360 x 768
31.469
37.500
37.861
37.879
46.875
48.077
48.363
56.476
60.023
45.000
47.712
59.940
75.000
72.809
60.317
75.000
72.188
60.004
70.069
75.029
60.000
60.015
25.175
31.500
31.500
40.000
49.500
50.000
65.000
75.000
78.750
74.250
85.500
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
+/+
+/+
VESA GTF 1280 x 720 52.500 70.000 89.040 -/+
NOTE
x
For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
x
The interlace mode is not supported.
x
The set might operate abnormally if a non-standard video format is selected.
x
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
[UC400019-Canada]BN68-02624B-02L02.indb 11 2010-03-12 오후 4:47:19
12
English
Connections
Changing the Input Source
Source List
Use to select TV or an external input sources
such as a DVD / Blu-ray player / cable box /
STB satellite receiver.
MENU
Input Source List
ENTER
TV / PC / AV / Component / HDMI1/DVI /
HDMI2 / USB
You can only choose external devices that
are connected to the TV. In the Source List,
connected inputs will be highlighted.
In the Source List, PC is always activated.
Edit Name
MENU
Input Edit Name ENTER
VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC /
DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:
Name the device connected to the input jacks to make
your input source selection easier.
When a PC with a resolution of 1360 x 768 @ 60Hz is
connected to the HDMI IN 1(DVI) port, you should set
to DIV PC mode under Edit Name.
When connecting an HDMI/DVI cable to the
HDMI IN 1(DVI) port, you should set to DVI PC or DVI
Devices mode under Edit Name.
Basic Features
How to Navigate Menus
Before using the TV, follow the steps below to learn how to
navigate the menu and select and adjust different functions.
F
AV.CH
HLIS
T
OO
L
S
SO
UR
CE
P
RE-
C
H
S
.M
O
DE
MEDIA
.
P
P
.M
O
D
E
P
.
S
IZ
E
CC
S
LEEP
A
B
C
D
MT
S
INF
O
PO
WER
4
1
2
3
EXIT
EXIT
MENU
EXIT
RETURN
RETURN
1 MENU button: Displays the main on-screen menu.
2 ENTER
/ Direction button: Move the cursor and
select an item. Confirm the setting.
3 RETURN button: Returns to the previous menu.
4 EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
1
MENU
The main menu options appear on
the screen:
Picture, Sound, Channel, Setup,
Input, Application, Support.
2
/ Select an icon with the or
button.
3
ENTER
Press ENTER
to access the
sub-menu.
4
/
Select the desired submenu with
the or button.
5
/
Adjust the value of an item with the
or button. The adjustment in
the OSD may differ depending on
the selected menu.
6
ENTER
Press ENTER
to confirm the
selection.
7
EXIT
Press EXIT.
SOURCE
[UC400019-Canada]BN68-02624B-02L02.indb 12 2010-03-12 오후 4:47:19
13
English
03 Basic Features
CH LIST
Channel Menu
Seeing Channels
Channel List
Add, delete or set Favorite nels and use the
program guide for digital broadcasts.
MENU
Channel Channel List
ENTER
Select a channel in the All Channels,
Added Channels, Favorite or Programmed
screen by pressing the / and ENTER
buttons. Then you can watch the selected channel.
All Channels: Shows all currently available channels.
Added Channels: Shows all added channels.
Favorite: Shows all favorite channels.
Programmed: Shows all currently reserved
programs.
Using the color buttons with the Channel List
x
Red (Antenna): Switches to Air or Cable.
x
B
Green (Zoom): Enlarges or shrinks a channel
number.
x
Yellow (Select): Selects multiple channel lists.
Select desired channels and press the Yellow button
to set all the selected channels at the same time. The
mark appears to the left of the selected channels.
x
(Page): Move to next or previous page.
x
(Tools): Displays the Channel List option menu.
(The options menus may differ depending on the
situation.)
Channel Status Display Icons
Icons Operations
A channel selected.
A channel set as a Favorite.
A reserved Program.
Using Favorite Channels
MENU
Channel Channel List ENTER
Add to Favorite / Delete from Favorite
Set channels you watch frequently as Favorites.
1. Select a channel and press the TOOLS button.
2. Add or delete a channel using the Add to Favorite or
Delete from Favorite menu respectively.
To show all Favorite channels, click on the
button shown on the right.
FAV.CH
6 Air
6-1 * TV #6
7 Air
8 Air
9 Air
9-1 * TV #9
10 Air
10-1 * TV #10
11-1 * TV #11
Air Antenna
B
Zoom Select Page

Tools
Added Channels
6 Air
6-1 * TV #6
7 Air
8 Air
9 Air
9-1 * TV #9
10 Air
10-1 * TV #10
11-1 * TV #11
Air Antenna
B
Zoom Select Page

Tools
Added Channels
Delete
Add to Favorite
Timer Viewing
Channel Name Edit
Select All
[UC400019-Canada]BN68-02624B-02L02.indb 13 2010-03-12 오후 4:47:21
14
English
Basic Features
Memorizing channels
MENU
Channel ENTER
Antenna (Air / Cable)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Auto Program
Air: Air antenna signal.
Cable: Cable antenna signal.
Auto: Air and Cable antenna.
NOTE
x
When selecting the Cable TV system: STD, HRC
and IRC identify various types of cable TV systems.
Contact your local cable company to identify the
type of cable system that exists in your particular
area. At this point, the signal source has been
selected.
x
After all the available channels are stored, it starts
to remove scrambled channels. The Auto program
menu then reappears.
Editing Channels
MENU
Channel Channel List ENTER
Channel Name Edit
1. Select a channel and press the TOOLS button.
2. Edit the channel name using the Channel Name Edit
menu.
Channel Name Edit (analog channels only): Assign your
own channel name.
Other Features
MENU
Channel ENTER
Clear Scrambled Channel
This function is used to filter out scrambled channels after
Auto Program is completed. This process may take up to
20~30 minutes.
How to Stop Searching Scrambled Channels
1. Press the ENTER
button to select Stop.
2. Press the button to select Yes.
3. Press the ENTER
button.
This function is only available in Cable mode.
Channel List
Channel List Option Menu
Set each channel using the Channel List menu options (Add
/ Delete, Timer Viewing, Select All / Deselect All). Option
menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
Add / Delete: Delete or add a channel to display the
channels you want.
NOTE
x
All deleted channels will be shown on the
All Channels menu.
x
A gray-colored channel indicates the channel
has been deleted.
x
The Add menu only appears for deleted
channels.
x
Delete a channel from the Added Channels or
Favorite menu in the same manner.
Timer Viewing: You can set a desired channel to be
displayed automatically at the reserved time. Set the
current time first to use this function.
1. Press the / / / buttons to select the
desired channel in Channel List.
2. Press the TOOLS button, then select
Timer Viewing.
3. Scroll up or down to adjust the settings in the box,
or use the numeric buttons on your remote for
entering the date and time.
If you selected Once, Every Week or
Every Day in Repeat, you can enter the date
you want.
4. Select OK, then press the ENTER
button when
done.
[UC400019-Canada]BN68-02624B-02L02.indb 14 2010-03-12 오후 4:47:22
15
English
03 Basic Features
NOTE
x
Only memorized channels can be reserved.
x
Reserved programs will be displayed in the
Programmed menu.
x
When a digital channel is selected, press the
button to view the digital program.
Select All: Select all the channels in the channel list.
Deselect All: Deselect all the selected channels.
You can only select Deselect All when one or
more channels are selected.
Programmed
(in Channel List)
You can view, modify or delete a show you have reserved
to watch. Programmed timer viewing is displayed here.
Highlight a program and press the TOOLS button to display
Options.
Change Info: Change a show you have reserved to
watch. Begin with step 3 of “Timer Viewing,” above.
Cancel Schedules: Cancel a show you have reserved
to watch.
This deletes the highlighted or selected
program(s).
Information: Display a show you have reserved
to watch. (You can also change the reservation
Information.)
Alternatively, you can view Information by
highlighting a program and pressing the
ENTER
button.
Select All / Deselect All: Select or deselect all reserved
programs.
Fine Tune
(analog channels only)
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation. If the signal is weak or distorted, fine tune
the channel manually. Scroll to the left or right until the image
is clear.
Settings are applied to the channel your currently
watching.
Fine tuned channels that have been saved are marked
with an asterisk “*” on the right-hand side of the
channel number in the channel banner.
To reset the fine-tuning, select Reset.
Picture Menu
Changing the Preset Picture Mode
MENU
Picture Mode ENTER
Mode
Select your preferred picture type.
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal
environment.
Movie: Suitable for watching movies in a
dark room.
Adjusting Picture Settings
Backlight / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
MENU
Picture ENTER
Your television has several setting options for picture quality
control.
NOTE
x
When you make changes to Backlight, Contrast,
Brightness, Sharpness, Color or Tint (G/R) the
OSD will be adjusted accordingly.
x
In PC mode, you can only make changes to
Backlight, Contrast and Brightness.
x
Settings can be adjusted and stored for each
external device connected to the TV.
P.MODE
[UC400019-Canada]BN68-02624B-02L02.indb 15 2010-03-12 오후 4:47:22
16
English
Basic Features
Economical Solutions
Eco Solution
MENU
Picture Eco Solution ENTER
Energy Saving (Off / Low / Medium / High /
Picture Off / Auto): This adjusts the brightness of the
TV in order to reduce power consumption. If you select
Picture Off, the screen is turned off , but the sound
remains on. Press any button to turn on the screen
again.
No Signal Power Off (Off / 15 min. / 30 min. / 60 min.)
:
To avoid unnecessary energy consumption, set how long
you want the TV to remain on if it's not receiving a signal.
Disabled when the PC is in power saving mode.
Changing the Picture Options
Advanced Settings
MENU
Picture Advanced Settings
ENTER
(Advanced Settings are available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have a
more precise picture.
In PC mode, you can only make changes to
Dynamic Contrast, Gamma and White Balance.
Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
Shadow Detail (-2~+2): Increase the brightness of dark
images.
Gamma: Adjust the primary color intensity.
RGB Only Mode (Off / Red / Green / Blue): Displays
the Red, Green, and Blue color for making fine
adjustments to the hue and saturation.
Color Space (Auto / Native / Custom): Adjust the
range of colors available to create the image. To adjust
Color, Red, Green, Blue and Reset, set Color Space
to Custom.
White Balance: Adjust the color temperature for a more
natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
Flesh Tone: Emphasize pink “Flesh Tone.”
Edge Enhancement (Off / On): Emphasize object
boundaries.
Picture Options
MENU
Picture Picture Options
ENTER
In PC mode, you can only make changes to the Color
Tone, Size, Digital Noise Filter and
Auto Protection Time.
Advanced Settings
Black Tone : Off
Dynamic Contrast : Medium
Shadow Detail : 0
Gamma : 0
RGB Only Mode : Off
Color Space : Native
White Balance
Move

Enter

Return
Picture Options
Color Tone : Normal
Size : 16:9
Digital Noise Filter : Auto
MPEG Noise Filter : Auto
HDMI Black Level : Normal
Film Mode : Off
Auto Protection Time : 2 hours
Move

Enter

Return
[UC400019-Canada]BN68-02624B-02L02.indb 16 2010-03-12 오후 4:47:23
17
English
03 Basic Features
Color Tone (Cool / Normal / Warm1 / Warm2)
Warm1 or Warm2 will be deactivated when the picture
mode is Dynamic.
Settings can be adjusted and stored for each external
device connected to an input on the TV.
Size: Your cable box/satellite receiver may
have its own set of screen sizes as well.
However, we highly recommend you use
16:9 mode most of the time.
16:9 : Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
Available for HD 1080i / 720p signal in 16:9 mode.
4:3 : Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
NOTE
x
After selecting Zoom1, Zoom2 or Wide Fit:
1. Press the button to select Position.
2. Press the ENTER
button.
3. Press the or button to move the picture up
or down.
4. Press the ENTER
button.
5. Press the button to select Reset.
6. Press the ENTER
button to reset the picture
to its default position.
x
After selecting Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the or button to select Position.
2. Press the ENTER
button.
3. Press the , , or button to move the
picture.
4. Press the ENTER
button.
5. Press the or button to select Reset.
6. Press the ENTER
button.
x
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
x
Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
Input Source Picture Size
ATV, AV,
Component (480i, 480p)
16:9, Zoom1,
Zoom2, 4:3
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
16:9, 4:3, Wide Fit,
Screen Fit
PC 16:9, 4:3
Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualization): If the broadcast signal received
by your TV is weak, you can activate the Digital Noise
Filter feature to reduce any static and ghosting that may
appear on the screen.
When the signal is weak, try other options until the
best picture is displayed.
Auto Visualization: When changing analog channels,
displays signal strength.
Only available for analog channels.
When bar is green, is that the best possible signal.
MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG noise to provide improved
picture quality.
HDMI Black Level (Normal / Low): Selects the black
level on the screen to adjust the screen depth.
Available only in HDMI mode.
Film Mode (Off / Auto1 / Auto2): Sets the TV to
automatically sense and process film signals from all
sources and adjusts the picture for optimum quality.
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
Auto Protection Time (2 hours / 4 hours / 8 hours
/ 10 hours / Off): Set the time the screen remains idle
with a still image until the screen saver is activated. The
screen saver prevents the formation of ghost images on
the screen.
P.SIZE
[UC400019-Canada]BN68-02624B-02L02.indb 17 2010-03-12 오후 4:47:24
18
English
Basic Features
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
Setting up the TV with Your PC
Set the input source to PC.
MENU
Picture ENTER
Auto Adjustment
Adjust frequency values/positions and fine tune the settings
automatically.
Not available when connecting with an HDMI/DVI cable.
Screen
Coarse / Fine: Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Fine-
tune again. After the noise has been reduced, readjust
the picture so that it is aligned to the center of screen.
Position: Adjust the PC’s screen positioning if it does
not fit the TV screen. Press the or button to adjust
the Vertical-Position. Press the or button to adjust
the Horizontal-Position.
Image Reset: Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC will probably look different, but
the same basic set-up information will apply in most cases.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
y The correct size setting (resolution) [Optimum: 1360 x
768 pixels]
y If a vertical-frequency option exists on your display
settings dialog box, the correct value is ‘60’ or ‘60 Hz’.
Otherwise, just click ‘OK’ and exit the dialog box.
Sound Menu
Changing the Preset Sound Mode
MENU
Sound Mode ENTER
Mode
Standard: Selects the normal sound
mode.
Music: Emphasizes music over voices.
Movie: Provides the best sound for
movies.
Clear Voice: Emphasizes voices over
other sounds.
Amplify: Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing
impaired.
Adjusting Sound Settings
MENU
Sound Equalizer ENTER
Equalizer
Adjusts the sound mode (standard sound mode only).
Balance L/R: Adjusts the balance between the right and
left speaker.
100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
Reset: Resets the equalizer to its default settings.
Sound Settings
MENU
Sound ENTER
Virtual Surround (Off / On)
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers using HRTF (Head
Related Transfer Function) technology.
Dialog Clarity (Off / On)
(standard sound mode only)
This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog can
be heard more clearly.
S.MODE
[UC400019-Canada]BN68-02624B-02L02.indb 18 2010-03-12 오후 4:47:24
19
English
03 Basic Features
Preferred Language
(digital channels only)
Digital-TV broadcasts are capable of
simultaneous transmission of many audio tracks
(for example, simultaneous translations of the
program into foreign languages).
You can only select a language among the
ones being broadcasted.
Multi-Track Sound (MTS)
(analog channels only)
Mono: Choose for channels that are
broadcasting in mono or if you are having
difficulty receiving a stereo signal.
Stereo: Choose for channels that are
broadcasting in stereo.
SAP: Choose to listen to the Separate Audio Program,
which is usually a foreign-language translation.
Depending on the particular program being broadcast,
you can listen to Mono, Stereo or SAP.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
Speaker Select (External Speaker / TV
Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
When Speaker Select is set to External Speaker
x
TV Speaker: Off, External Speaker: On
When Speaker Select is set to TV Speaker
x
TV Speaker: On, External Speaker: On
If there is no video signal, both speakers will be mute.
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
Setup Menu
Setting the Time
MENU
Setup Time ENTER
Time
Clock: Setting the clock is for using various timer
features of the TV.
The current time will appear every time you press
the INFO button.
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
Auto: Set the current time automatically using the
time from a digital channel.
The antenna must be connected in order to set
the time automatically.
Manual: Set the current time manually.
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
MTS
MTS
[UC400019-Canada]BN68-02624B-02L02.indb 19 2010-03-12 오후 4:47:25
20
English
Basic Features
SLEEP
Clock Set: Set Month, Day, Year, Hour, Minute and
am/pm manually.
Available only when Clock Mode is set to
Manual.
You can set the Month, Day, Year, Hour and
Manual directly by pressing the number buttons
on the remote control.
DST (Daylight Saving Time) (Off / On): Switches the
Daylight Saving Time function on or off.
This function is only available when the
Clock Mode is set to Auto.
Time Zone: Select your time zone.
This function is only available when the
Clock Mode is set to Auto.
Using the Sleep Timer
MENU
Setup Time Sleep
Timer ENTER
Sleep Timer
: Automatically
shuts off the TV after a preset period
of time. (30, 60, 90, 120, 150 and 180
minutes).
To cancel the Sleep Timer, select Off.
Setting the On / Off Timer
MENU
Setup Time Timer 1
ENTER
Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
On Time / Off Time: Set the hour, minute, and activate
/ inactivate. (To activate the timer with the setting you’ve
chosen, set to Activate.)
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
Antenna (when the Source is set to TV): Select Air or
Cable.
Channel (when the Source is set to TV): Select the
desired channel.
Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
NOTE
x
If there is no music file on the USB device or the
folder containing a music file is not selected, the
Timer function does not operate correctly.
x
When there is only one photo file in the USB,
the Slide Show will not play.
x
If a folder name is too long, the folder cannot be
selected.
x
Each USB you use is assigned its own folder.
When using more than one of the same type of
USB, make sure the folders assigned to each
USB have different names.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to
activate the timer.
The
mark indicates the day is selected.
Auto Power Off (available only when the TV is turned on by
the Timer): The TV will be automatically turned off after 3
hours of being left idle to prevent overheating.
Locking Programs
MENU
Setup Security ENTER
Security
The PIN input screen appears, Enter your 4 digit PIN number.
V-Chip: The V-Chip feature automatically locks out
programs that are deemed inappropriate for children.
The user must enter a PIN (personal identification
number) before any of the V-Chip restrictions are set up
or changed.
NOTE
x
V-Chip is not available in HDMI, Component
or PC mode.
x
The default PIN number of a new TV set is
“0-0-0-0.
x
Allow All: Press to unlock all TV ratings.
x
Block All: Press to lock all TV ratings.
10 TV Cable 1
00 00 am
00 00 am
Timer 1
On Time
Off Time
Volume
Inactivate
Inactivate
Sun Mon Tue Wed Thu Fri Sat
Once
Source Antenna Channel
Repeat
Move
Adjust 
Enter

Return
[UC400019-Canada]BN68-02624B-02L02.indb 20 2010-03-12 오후 4:47:25
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85

Samsung UN26C4000 Le manuel du propriétaire

Catégorie
Téléviseurs LCD
Taper
Le manuel du propriétaire

dans d''autres langues