Accu-Chek Tender Mode d'emploi

04536517001/I Last update: 04-2016

Infusion set / Set de infusión /

Dispositif de perfusion

Made in Denmark

Fabricado en Dinamarca

Fabriqué au Danemark

In US, distributed by:

En EE.UU., distribuido por:

Aux États-Unis, distribué par :

Roche Diabetes Care, Inc.

Indianapolis, IN 46256, USA

Toll Free / Teléfono atención / Sans frais 1-800-280-7801

ACCU-CHEK and ACCU-CHEK TENDER are trademarks of Roche.

ACCU-CHEK y ACCU-CHEK TENDER son marcas registradas de Roche.

ACCU-CHEK et ACCU-CHEK TENDER sont des marques de Roche.

Legal Manufacturer: / Fabricante legal: / Fabricant légal :

Unomedical a/s

Aaholmvej 1-3, Osted

4320 Lejre, Denmark

1

4

2

5

3

6

Manufacturer

Fabricante

Fabricant

Global Trade Item Number

Número mundial de artículo comercial

Code article international

2

Instructions for use

Instrucciones de uso

Instructions d’utilisation

en

es

fr

Infusion set

33

L K J I N

M

F

B

C

G D

A

E

H

transfer set

head set

4

en

Description

The Accu-Chek Tender infusion set is intended for the subcutaneous infusion

of insulin, administered with microdosage insulin pumps.

Contents of the package Accu-Chek Tender II

Inner packages 1 and 2.

Package 1: head set and transfer set

A protective cover

B soft cannula

C introducer needle

D side clips of the introducer needle

E self-adhesive

F front half of the adhesive backing

G back half of the adhesive backing

H cannula housing

I tubing

J connector with connector needle

K side clips of the connector

L circular protective cap

M disconnect cover

N luer-lock connector

5

Package 2: additional head set

Components A–H from package 1.

Contents of the package Accu-Chek Tender I

Package 1 only.

WARNING

Read the instructions carefully before use.

We recommend that you consult your insulin pump manual for information

regarding pump therapy.

• When using the infusion set for the ﬁrst time, your doctor or healthcare team

must be present.

• This device remains sterile until the package is opened or becomes damaged.

Do not use if the sterile package has been opened or damaged.

• Protect the product from excessive humidity, sunlight and heat. Store at

room temperature.

6

en

• Dispose of your infusion set after use according to local regulations. Do not

clean or re-sterilize.

• Reuse of the infusion set may cause infection, site irritation or damage to the

cannula/needle. A damaged cannula/needle may lead to inaccurate insulin

delivery.

• The infusion set is for subcutaneous use only.

• Always screw the luer-lock connector ﬁrmly into the pump adapter. If this is

not done, a loose connection between the infusion set and the pump could

cause leakage. Avoid using tools to screw the luer-lock connector into place,

otherwise damage could result to the luer-lock connector.

• Do not leave air bubbles in the infusion set. Prime thoroughly.

• A small percentage of the Accu-Chek Tender infusion sets using soft cannulas

can accidentally become crimped during insertion or displaced while in use.

If this should occur, use a new infusion set immediately.

• Check the infusion site frequently to make sure the soft cannula remains

ﬁrmly in place. Because the cannula is so soft, you will not notice any pain if

7

it is pulled out. The soft cannula must always be completely inserted in order

to receive the full amount of insulin. Replace the infusion set as soon as the

self-adhesive loosens.

• Do not reinsert the introducer needle into the soft cannula. Reinsertion could cause

tearing of the soft cannula which would result in unpredictable insulin delivery.

• If you have to disconnect your infusion set, pay particular attention to hygiene.

• Never use a soft cannula for more than 72 hours (3 days). Never use the

transfer set for more than 6 days. When changing the cartridge, make sure

that the transfer set is completely primed before connecting it to the head set.

• lf the infusion site becomes inﬂamed, replace the infusion set and use a

new site.

• Do not put disinfectants, perfumes, deodorants or insect repellent on your

infusion set as these may aect the integrity of the infusion set.

• Never prime the transfer set or attempt to free a clogged line while the transfer

set is connected to the head set. You may accidentally infuse an uncontrolled

quantity of insulin.

8

en

• Avoid mechanical stress on the infusion site and on the infusion set. Pay

attention when carrying heavy weights.

• Before inserting the infusion set, prepare the infusion site in accordance with

the instructions of your healthcare professional.

• Check your blood glucose level 1 to 3 hours after inserting your infusion set

and inspect the infusion site on a regular basis. Do not insert a new soft

cannula just prior to bedtime. Check blood glucose frequently (check with

your healthcare professional).

• lf there is an unexplained increase in your blood glucose level, causing it to

be too high, or an “occlusion” alarm occurs, check for clogs and leaks. lf in

doubt, change your infusion set.

• This product contains small parts. There is a risk of suocation if small parts

(e.g. covers, caps or similar objects) are swallowed.

• Pay attention to the tubing of the infusion set connected to your body. There

is a risk of strangulation if the tubing becomes wrapped around your neck.

9

In case of doubt, use the shortest tubing length to minimise the risk of

strangulation.

Insert the infusion set

Picture 1

Choose a site away from the waistline, bones, scar tissue, belly button and

recent infusion sites. Wash your hands and clean the infusion site according

to the instructions from your healthcare professional. Allow the infusion site to

dry before the soft cannula is inserted.

Remove the front half of the adhesive backing (F) from the self-adhesive (E) and

pull the protective cover (A) o the introducer needle (C). Grasp the infusion set

between the thumb and middle ﬁnger of one hand behind the side clips and

pull back the edge of the self-adhesive with the index ﬁnger.

10

en

WARNING

Ensure clean application. Do not touch the soft cannula or the introducer needle.

Picture 2

With your free hand, pinch together the subcutaneous tissue at the disinfected

site. Insert the introducer needle (C) under the skin at an angle of 20–45°,

proceeding quickly and in one motion. Watch the soft cannula (B) while

inserting to assure that it goes in smoothly without kinking or crimping.

WARNING

People with very small or large amounts of subcutaneous fatty tissue should take

care when choosing the angle of insertion or the cannula length. The cannula could

become lodged in the muscular tissue or epidermis, where absorption of the insu-

lin is limited or impossible. Ask your healthcare professional for more information.

Make sure that the soft cannula is fully inserted into the subcutaneous tissue

and not kinked at the skin surface.

11

Insert the introducer needle in a single, smooth movement, otherwise the soft can-

nula may kink or crimp upon insertion, causing reduced or blocked insulin delivery.

Picture 3

Press the self-adhesive (E) ﬁrmly onto the skin in order to ensure secure

positioning of the infusion set. Place one ﬁnger in front of the inspection window

on the infusion set to ﬁx it. Press the side clips of the introducer needle (D) together

gently and at the same time pull the introducer needle (C) out of the skin.

WARNING

Dispose of the introducer needle safely, so that nobody can prick or injure

themselves on it.

The safest way to dispose of a used introducer needle is to immediately place it

in a sharps disposal container to reduce the risk of accidental pricks or injuries

from loose sharps. If you cannot ﬁnd a sharps disposal container right away,

12

en

you may need to recap the needle or use a needle clipper until you have an

opportunity to dispose of sharps in an appropriate sharps disposal container.

Never throw away loose introducer needles and other sharps in trash cans or

recycling bins, and never ﬂush them down the toilet.

Picture 4

Remove the back half of the adhesive backing (G) from the self-adhesive (E)

and press the self-adhesive ﬁrmly onto the skin.

Picture 5

Attach the luer-lock connector (N) to the pump by screwing it into the pump

adapter. Make sure there is a cartridge containing sucient insulin in the

cartridge compartment. Remove the circular protective cap (L) by pressing the

side clips gently inwards. Follow the pump manufacturer’s User’s Manual to

prime the transfer set until insulin drips from the connector needle tip. Do not

leave air bubbles in either the cartridge or the transfer set.

13

Picture 6

Connect the transfer set to the newly inserted head set with the bulging side

upwards. An audible “click” ensures the connector has locked into place. Fill

the empty space of the cannula housing (H) with a bolus of 0.7 units of U100

insulin (about 7µl). Start insulin delivery with the pump.

WARNING

Change the head set every 2 to 3 days (max. 72 hours), otherwise you risk

insulin resistance or inﬂammation of the infusion site.

Never use the transfer set for more than 6 days.

You must ﬁll the empty space of the newly inserted head set after connecting

the transfer set. Failure to do so results in missed insulin.

Always check your blood glucose level 1 to 3 hours after inserting your infusion set.

If the coupling does not click noticeably and audibly together, use a new head set

and a new transfer set.

Do not use any tools to screw the luer-lock connector into place.

14

en

Priming volume:

60 cm/24" approx 10 units U100 insulin approx 100 µl

80 cm/31" approx 13 units U100 insulin approx 130 µl

110 cm/43" approx 18 units U100 insulin approx 180 µl

Disconnect the infusion set

The infusion set allows you to temporarily disconnect from your pump for

showering, swimming, etc., without changing your infusion set.

WARNING

Consult with your healthcare professional on how to compensate for any missed

insulin while you are disconnected. Carefully monitor your blood glucose level

while disconnected from the pump and after you reconnect.

15

Step 1

Stop the pump. Hold the self-adhesive (E) in place, gently press the side clips of

the connector (K) together and pull the connector (J) from the cannula housing (H).

Step 2

Put the disconnect cover (M) on the cannula housing.

Reconnect the infusion set

WARNING

Before reconnecting, ensure that a drop of insulin appears at the tip of the

connector needle.

Step 1

Prime the infusion set until insulin comes out of the connector needle.

16

en

Step 2

Hold the self-adhesive (E) in place and remove the disconnect cover (M) from

the cannula housing (H).

Reattach the connector (J) to the cannula housing. An audible “click” ensures

the connector is locked.

WARNING

It is not necessary to give an additional bolus.

In US, distributed by:

Roche Diabetes Care, Inc.

Indianapolis, IN 46256, USA

Toll Free: 1-800-280-7801

ACCU-CHEK Customer Care

Service Center: 1-800-688-4578

www.accu-chek.com

Canada

Accu-Chek Pump Support:

1-800-688-4578 (toll free)

www.accu-chek.ca

Set de infusión

17

L K J I N

M

F

B

C

G D

A

E

H

catéter

cabezal

18

es

Descripción

El set de infusión Accu-Chek Tender ha sido diseñado para la administración

subcutánea de insulina realizada con micro-infusoras de insulina.

Contenido del envase Accu-Chek Tender II

Envases interiores 1 y 2.

Envase 1: Cabezal y tubo

A capuchón protector

B cánula ﬂexible

C aguja guía

D clips laterales de la aguja guía

E adhesivo

F mitad anterior del protector del

adhesivo

G mitad posterior del protector

del adhesivo

H cuerpo de la cánula

I catéter

J conector con aguja del conector

K clips laterales del conector

L cubierta protectora circular

M tapón de desconexión

N conector de cierre luer

19

Envase 2: Cabezal adicional

Componentes A–H del envase 1.

Contenido del envase de Accu-Chek Tender I

Sólo envase 1.

ADVERTENCIA

Lea detenidamente las instrucciones antes de usar el producto.

Es recomendable que consulte las instrucciones de uso de la micro-infusora

de insulina para obtener información acerca de esta terapia.

Si es la primera vez que lo utiliza, deberá colocarlo bajo la supervisión de un

profesional sanitario.

• Si es la primera vez que utiliza el set de infusión, deberá hacerlo en presencia

de su médico o equipo de personal sanitario.

• Este dispositivo se conserva estéril hasta que se abre o se daña el envase.

No utilice el producto si el envase está abierto o ha sufrido algún daño.

La page charge ...

Accu-Chek Tender Mode d'emploi

Ce manuel convient également à

Accu-Chek Tender Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents