ADLINK Technology DLAP-201 Series Manuel utilisateur

Marque: ADLINK Technology

Modèle: DLAP-201 Series

Taper: Manuel utilisateur

Ce manuel convient également à

Leading EDGE COMPUTING

DLAP-201 Series

DLAP-201-JT2 / DLAP-201-JT2i

Edge Inference System

User’s Manual

Manual Rev.: 1.0

Revision Date: January 14, 2020

Part No: 50-1Z308-1000

Leading EDGE COMPUTING

Revision History

Revision Release Date Description of Change(s)

1.0 2020-01-14 Initial Release

Preface iii

DLAP-201 Series

Preface

This document contains proprietary information protected by copy-

right. All rights are reserved. No part of this manual may be repro-

duced by any mechanical, electronic, or other means in any form

without prior written permission of the manufacturer.

Disclaimer

The information in this document is subject to change without prior

notice in order to improve reliability, design, and function and does

not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, spe-

cial, incidental, or consequential damages arising out of the use or

inability to use the product or documentation, even if advised of

the possibility of such damages.

Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global

environmental preservation through compliance with the Euro-

pean Union's Restriction of Hazardous Substances (RoHS) direc-

tive and Waste Electrical and Electronic Equipment (WEEE)

directive. Environmental protection is a top priority for ADLINK.

We have enforced measures to ensure that our products, manu-

facturing processes, components, and raw materials have as little

impact on the environment as possible. When products are at their

end of life, our customers are encouraged to dispose of them in

accordance with the product disposal and/or recovery programs

prescribed by their nation or company.

Trademarks

Product names mentioned herein are used for identification pur-

poses only and may be trademarks and/or registered trademarks

of their respective companies.

iv Preface

Leading EDGE COMPUTING

Conventions

Take note of the following conventions used throughout this

manual to make sure that users perform certain tasks and

instructions properly.

NOTE:

Additional information, aids, and tips that help users perform

tasks.

CAUTION:

Information to prevent minor physical injury, component dam-

age, data loss, and/or program corruption when trying to com-

plete a task.

Informations destinées à prévenir les blessures corporelles

mineures, les dommages aux composants, la perte de don-

nées et/ou la corruption de programme lors de l'exécution

d'une tâche.

WARNING:

Information to prevent serious physical injury, component

damage, data loss, and/or program corruption when trying to

complete a specific task.

Informations destinées à prévenir les blessures corporelles

graves, les dommages aux composants, la perte de données

et/ou la corruption de programme lors de l'exécution d'une

tâche spécifique.

Table of Contents v

DLAP-201 Series

Table of Contents

Preface.................................................................................... iii

List of Tables......................................................................... vii

List of Figures........................................................................ ix

1 Introduction ........................................................................ 1

1.1 Features............................................................................... 1

1.2 Specifications....................................................................... 2

1.3 Mechanical Dimensions....................................................... 4

1.4 External Layout.................................................................... 5

1.5 Pin Definitions...................................................................... 7

1.5.1 Ethernet GbE Connectors ..........................................7

1.5.2 USB 3.0 Connectors...................................................8

1.5.3 12 Volt DC Connector.................................................9

1.5.4 CAN Bus...................................................................10

1.5.5 COM Port (Serial Port) .............................................10

1.5.6 HDMI Connectors.....................................................11

1.5.7 USB 2.0 OTG Connector..........................................11

1.5.8 Side I/O Slots............................................................12

2 Getting Started ................................................................. 15

2.1 Unpacking Checklist .......................................................... 15

2.2 Cooling Considerations...................................................... 15

2.3 Removing the Chassis Cover............................................ 16

2.4 Installing mSATA Module .................................................. 18

2.5 Installing mPCIe 3G/4G LTE Module................................. 19

2.6 Connecting DC Power ....................................................... 20

2.7 VESA Mount...................................................................... 21

2.8 DIN Rail Mount .................................................................. 22

2.9 Internal Jumper Settings.................................................... 23

vi Table of Contents

Leading EDGE COMPUTING

2.9.1 COM Mode Switches................................................24

2.9.2 AT Mode Switch (SWS1501)....................................24

2.9.3 GPIO Switch (CN1501).............................................24

3 Using the System.............................................................. 25

3.1 Software Configuration ...................................................... 25

3.2 System Recovery............................................................... 25

3.3 COM Port Configuration..................................................... 26

Important Safety Instructions............................................... 27

Getting Service...................................................................... 29

List of Tables vii

DLAP-201 Series

List of Tables

Table 1-1: Specifications .............................................................3

Table 1-2: Front Panel I/O Connectors & Controls......................5

Table 1-3: Rear Panel I/O Connectors ........................................6

Table 1-4: RJ-45 GbE Pin Definition............................................7

Table 1-5: USB 3.0 Pin Definition................................................8

Table 1-6: 12 Volt DC Connector Pin Definition ..........................9

Table 1-7: CAN Bus Pin Definition.............................................10

Table 1-8: RS-232/422/485 Connector Pin Definition................10

Table 1-9: HDMI Connector Pin Definition.................................11

Table 1-10: USB 2.0 OTG Connector Pin Information.................11

Table 2-1: COM Mode Switches................................................24

Table 2-2: AT Mode Switch .......................................................24

Table 2-3: GPIO Switch.............................................................24

viii List of Tables

Leading EDGE COMPUTING

This page intentionally left blank.

List of Figures ix

DLAP-201 Series

List of Figures

Figure 1-1: Front View Dimensions...............................................4

Figure 1-2: Side View Dimensions................................................4

Figure 1-3: Front Panel I/O Connectors & Controls......................5

Figure 1-4: Rear Panel I/O Connectors ........................................6

Figure 1-5: 12 Volt DC Connector Mechanical Specification........9

Figure 1-6: USIM / SD Side Door................................................12

Figure 2-1: mSATA Slot..............................................................18

Figure 2-2: mPCIe 3G/4G LTE Slot............................................19

Figure 2-3: VESA Mount.............................................................21

Figure 2-4: DIN Rail Mount.........................................................22

Figure 2-5: Internal Jumpers.......................................................23

Figure 3-1: Successful USB 2.0 Connection...............................26

xList of Figures

Leading EDGE COMPUTING

This page intentionally left blank.

Introduction 1

DLAP-201 Series

1 Introduction

ADLINK’s DLAP-201 Series Edge Inference System leverages the

power of NVIDIA® Jetson™ TX2/TX2i modules to deliver artificial

intelligence (AI) at the edge. The DLAP-201-JT2 Edge AI Platform

with integrated NVIDIA Jetson TX2 accelerates deep learning

workloads for object detection, recognition, and classification. With

the rapidly increased adoption of AI across industries, the DLAP-

201-JT2 can be useful for a wide variety of smart city and smart

manufacturing applications, including real-time traffic flow analysis

at an intersection for traffic management optimization, improve-

ment of smart bus services, strengthening of security surveillance,

and many others.

The DLAP-201 Series provides a wide variety of industrial I/O and

visual inferencing capabilities in a compact system. With a lock-

able HDMI display, two GbE ports, three USB 3.0 ports (plus a

USB 2.0 OTG port for software updates), one COM port, one iso-

lated CAN bus, one audio jack for mic-in or line-out support, 32GB

of eMMC storage plus one mSATA and one SD slot for additional

storage options, Wi-Fi and Bluetooth support, and an mPCIe slot

and USIM socket to support other wireless communications such

as LoRa and 3G/4G LTE, the DLAP-201-JT2 enables AI at the

edge with exceptional performance and convenience while keep-

ing power consumption to a minimum.

1.1 Features

 Deep learning acceleration with NVIDIA® Jetson™ TX2/TX2i

 NVIDIA® Pascal™ GPU with 256 CUDA cores

 8GB 128-bit LPDDR4

 32GB eMMC plus SDIO and mSATA storage interfaces

 Compact fanless system: 148(W) x 104.8(D) x 52.1(H) mm

 Wide temperature range: -20°C to 70°C

2Introduction

Leading EDGE COMPUTING

1.2 Specifications

Item Description

System Core

Processor NVIDIA Jetson TX2 (TX2i optional)

Memory 8GB 128-bit LPDDR4

Storage 32GB eMMC 5.1

Graphic Output

Graphic Output 1x HDMI 2.0 with lock (3840x2160 @60fps)

Front Panel I/O Interface

Ethernet 2x GbE

USB 3.0 3x Type-A

Audio 1x Audio jack (mic-in or line-out)

Rear Panel I/O Interface

USB 1x USB 2.0 OTG (Micro-USB)

Serial Port 1x COM port (DE-9 connector)

CAN Bus 1x CAN bus (2.0B)

Internal I/O Interface

Mini PCIe 1x mPCIe slot (linked to USIM)

USIM 1x USIM slot (standard size)

Wireless

(via TX2)

Wi-Fi 802.11ac (2×2 867Mb/s)

Bluetooth 4.1 (24MB/s)

DIO 4 channel DIO

Debug Port 1x debug console

Storage Devices

SATA mSATA (full size)

SD Card 1x SDIO

Power

DC Input 12V

AC Input

Optional 40W AC-DC adapter

(ADLINK part no. 31-62156-1000-A0)

Fail Reset Reset and recovery buttons

Buttons Power button w/ LED indicator

Introduction 3

DLAP-201 Series

Table 1-1: Specifications

CMOS Battery

Type BR2032

Protection Reverse charge protection

Mechanical

Antenna Holes 4x SMA

Dimensions 148(W) x 104.8(D) x 52.1(H) mm

Weight 765g

Mounting VESA (DIN rail optional)

Environmental

Operating

Temperature

Standard -20°C to 70°C

Operating

Humidity

95% @40°C (non-condensing)

Storage

Temperature

-40°C to 85°C

Vibration Operating: 5Grms, 5 to 500 Hz, 3 axes w/ mSATA

Shock Operating: 100G, half sine 11 ms duration w/ SD, mSATA

ESD Contact +/- 4kV, Air +/- 8kV

EMC CE & FCC class B, (EN61000-6-4/-6-2)

Safety IEC/CE/UL standard

RF Regulations FCCID

Operating System Support

Linux Linux for Tegra (L4T)

Item Description

4Introduction

Leading EDGE COMPUTING

1.3 Mechanical Dimensions

All dimensions shown in millimeters (mm).

Figure 1-1: Front View Dimensions

Figure 1-2: Side View Dimensions

!259!

!63/21!!4/91!

104.80

Introduction 5

DLAP-201 Series

1.4 External Layout

Front Panel

Figure 1-3: Front Panel I/O Connectors & Controls

Table 1-2: Front Panel I/O Connectors & Controls

Item Name Description

A Reset button

The reset button executes a hard reset on the

system.

B Recovery button

Press this button to force the system into recovery

mode. See Section 3.2 System Recovery.

C Power button

The power button is a non-latched push button

with a blue LED power indicator. If the system is

powered off when the button is pressed, the

system powers up and the blue LED lights up. If

the system hangs, pressing and holding the

button continuously for 5 seconds performs a hard

shutdown on the system.

D Audio connector A single audio jack for mic-in or line-out.

GbE connector

(LAN 1)

GbE from NVIDIA® Jetson™ TX2. See

Section 1.5 Pin Definitions.

GbE connector

(LAN 2)

GbE from Intel® I210. See Section 1.5 Pin

Definitions.

G - H USB 3.0 x 3 See Section 1.5.2 USB 3.0 Connectors.

I DC connector 12V

12V DC screw-type connector. See Section 1.5.3

12 Volt DC Connector.

A B C D E F G H I

6Introduction

Leading EDGE COMPUTING

Rear Panel

Figure 1-4: Rear Panel I/O Connectors

Table 1-3: Rear Panel I/O Connectors

Item Name Description

J CAN bus CAN 2.0B (backward compatible with 2.0A)

K Serial port

COM port (DE-9 connector); RS-232/422/485

supported by jumper selection

L HDMI port HDMI 2.0 with lock

M USB 2.0 USB 2.0 OTG (Micro-USB)

J K L M

Introduction 7

DLAP-201 Series

1.5 Pin Definitions

1.5.1 Ethernet GbE Connectors

The DLAP-201 series comes with two RJ-45 connectors:

 NVIDIA® Jetson™ TX2 (LAN 1)

 Intel® I210 (LAN 2)

LAN LED connection speed color indicators:

 Yellow (left LED): 1Gbps

 Green (right LED): 100Mbps

The following table provides details for the RJ-45 GbE pin connec-

tions.

Table 1-4: RJ-45 GbE Pin Definition

Pin #

10BASE-T/

100BASE-TX

1000BASE-T

1 TX+ LAN_TX0+

2 TX- LAN_TX0-

3 RX+ LAN_TX1+

4 — LAN_TX2+

5 — LAN_TX2-

6 RX- LAN_TX1-

7 — LAN_TX3+

8 — LAN_TX3-

8Introduction

Leading EDGE COMPUTING

1.5.2 USB 3.0 Connectors

The USB 3.0 ports support a USB Type-A connection, compatible

with SuperSpeed, Hi-Speed, full-speed, and low-speed USB

devices. It is suitable for USB peripherals including USB cameras.

The following table provides details for the USB pin connections.

Table 1-5: USB 3.0 Pin Definition

Pin # Signal Name

1 USB3.0_P5VA

2 USB2_CMAN

3 USB2_CMAP

4GND

5 USB3A_CMRXN

6 USB3A_CMRXP

7GND

8 USB3A_CMTXN

9 USB3A_CMTXP

Introduction 9

DLAP-201 Series

1.5.3 12 Volt DC Connector

The system requires a DC power source with a screw-type con-

nector.

Table 1-6: 12 Volt DC Connector Pin Definition

Figure 1-5: 12 Volt DC Connector Mechanical Specification

Pin Signal

1+12V

2GND

3GND

Dimensions: mm

10 Introduction

Leading EDGE COMPUTING

1.5.4 CAN Bus

The Controller Area Network (CAN) enables communication

among devices. The table below provides CAN bus pin informa-

tion.

Table 1-7: CAN Bus Pin Definition

1.5.5 COM Port (Serial Port)

RS-232/422/485 are supported by jumper selection. For details,

see Section 2.9.1 COM Mode Switches on page 24.

Table 1-8: RS-232/422/485 Connector Pin Definition

Pin Signal Description

1 NC (Not connected)

2 CAN0_Low Differential CAN signal negative level

3 CAN0_GND CAN interface ground

4 NC (Not connected)

5 NC (Not connected)

6 NC (Not connected)

7 CAN0_High Differential CAN signal positive level

8 NC (Not connected)

9 NC (Not connected)

Pin RS-232 RS-422 RS-485

1 NC (not connected) COM_TXD_N COM_D-

2 COM_RXD COM_TXD_P COM_D+

3 COM_TXD COM_RXD_P NC

4NC COM_RXD_NNC

5 COM_GND NC NC

6NC NC NC

7COM_RTS# NC NC

8 COM_RCTS# NC NC

9NC NC NC

La page charge ...

ADLINK Technology DLAP-201 Series Manuel utilisateur

Marque: ADLINK Technology

Modèle: DLAP-201 Series

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: ADLINK Technology DLAP-201 Series User manual

ADLINK Technology DLAP-201 Series Manuel utilisateur

Ce manuel convient également à

ADLINK Technology DLAP-201 Series Manuel utilisateur

dans d''autres langues

Autres documents