Ubiquiti AFi-ALN Guide de démarrage rapide

AFi-ALN
Ubiquiti
Marque
Ubiquiti
Modèle
AFi-ALN
Taper
Guide de démarrage rapide
2019/11/6 AFi-ALN Quick Start Guide
https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 1/17
Router MeshPoint Power Cables (Qty. 2)
Ethernet Cable
Package Contents
Hardware Overview
Router
AFi-ALN Quick Start Guide
2019/11/6 AFi-ALN Quick Start Guide
https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 2/17
Touchscreen Display
Adjustable LED
Ethernet Ports
WAN Port
Power Port
Signal LEDs
The front of the AmpliFi Router features a touchscreen display.
The bottom of the AmpliFi Router features an adjustable LED that is fully lit by
default when the Router is configured and ready for use.
The brightness settings of the touchscreen and LED are configurable
using the AmpliFi app.
(4) Gigabit Ethernet ports available to connect 10/100/1000 Mbps wired
network device to the internet.
Connects to the broadband modem provided by your ISP (Internet Service
Provider).
The Power Cable connects to this port.
MeshPoint
AFi-ALN Quick Start Guide
2019/11/6 AFi-ALN Quick Start Guide
https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 3/17
Adjustable LED
Ethernet Port
Power Port
The Signal LEDs will reflect signal strength once the MeshPoint is connected
to the Router.
The bottom of the AmpliFi Router features an adjustable LED that is fully lit by
default when the Router is configured and ready for use.
The brightness settings of the touchscreen and LED are configurable
using the AmpliFi app.
Gigabit Ethernet port available to connect a 10/100/1000 Mbps wired network
device to the internet.
The Power Adapter connects to this port.
Installation
The AmpliFi Router can be installed using one of the following methods:
App Users AmpliFi app for iPhone or Android™
Non-App Users Connect to default AmpliFi wireless network (SSID) from a
computer or tablet.
App Users
1.
2.
AFi-ALN Quick Start Guide
2019/11/6 AFi-ALN Quick Start Guide
https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 4/17
3.
AFi-ALN Quick Start Guide
2019/11/6 AFi-ALN Quick Start Guide
https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 5/17
4.
5.
AFi-ALN Quick Start Guide
2019/11/6 AFi-ALN Quick Start Guide
https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 6/17
6.
7. Follow the on-screen instructions to configure your AmpliFi Router.
AFi-ALN Quick Start Guide
2019/11/6 AFi-ALN Quick Start Guide
https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 7/17
Non-App Users
1.
2.
AFi-ALN Quick Start Guide
2019/11/6 AFi-ALN Quick Start Guide
https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 8/17
3.
4.
AFi-ALN Quick Start Guide
2019/11/6 AFi-ALN Quick Start Guide
https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 9/17
5.
6.
AFi-ALN Quick Start Guide
2019/11/6 AFi-ALN Quick Start Guide
https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 10/17
7.
8. Connect to the new wireless network that you've created.
AFi-ALN Quick Start Guide
2019/11/6 AFi-ALN Quick Start Guide
https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 11/17
Installing the MeshPoint
App Features
The system dashboard is displayed in the System window. It
provides an overview of the AmpliFi Wi-Fi system including network
status, number of connected clients, and active download/upload
speeds. Tap devices to display/edit settings.
Tap Start Test on the Performance screen to run a speed test that
will provide your download speed, upload speed, and connection
ping time. Swipe left on the throughput section to view additional
data. A history of recent tests is displayed at the bottom.
To provide guest access, determine the number of guests, select a
time limit for their access, and tap Start. Guests simply connect to
AFi-ALN Quick Start Guide
2019/11/6 AFi-ALN Quick Start Guide
https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 12/17
your wireless network named with the -guest label. No password is
required. As guests connect, the number of users connected will be
displayed in the app. Tap Stop at any time to turn off the guest
network.
The Family Profiles feature allows you to create profiles for family
members, groups, or areas of your home. Assign devices to the
profile, schedule quiet time (when internet is not accessible), and
pause the internet at any time.
The Diagnose option will check your WAN link, IP settings, internet
connection, and MeshPoint status.
Side Menu - 24/7 Live Chat Support
Tap in the upper left of the app to access the side menu. Tap Live Support for
24/7 live chat support. Remote Access can also be enabled from this menu.
Resetting to Factory Defaults
If the AmpliFi Router administration password is lost, factory default settings can
be restored.
AFi-ALN Quick Start Guide
2019/11/6 AFi-ALN Quick Start Guide
https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 13/17
Router Reset
Use an object such as a straightened paper clip to press Reset located on the
bottom of the AmpliFi Router for approximately 10 seconds until the LED turns
off.
System Specifications
Dimensions 110 x 110 x 250 mm (4.33 x 4.33 x 9.84")
Weight Router: 1.2 kg ( 2.65 lb), MeshPoint 1.09 kg ( 2.40
lb)
Max. TX Power 2.4 GHz: 23 dBm per chain, 5 GHz 19 dBm per
chain (low band)/ 20 dBm per chain (high band):
MIMO 2.4 GHz: 4x4, 5 GHz: 4x4 (low-band) + 8x8 (high
band)
Speeds 2.4 GHz: 1148 Mbps, 5 GHz: 1733 Mbps (low
band)/ 4804 Mbps (high band)
Range 21,000 sq. ft
Max. Power Consumption Router: 35W, MeshPoint: 34W
Power Method AC
Power Supply AC Outlet Directly
Supported Power Voltage 100-240V
AFi-ALN Quick Start Guide
2019/11/6 AFi-ALN Quick Start Guide
https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 14/17
ESD/EMP Protection ± 24kV Air/Contact
Buttons Reset
Antennas (2) Internal Dual-Band Metal Stamp with 12 Polarity
Antenna Gain 2.4 GHz: 4 dBi, 5 GHz: 3.5 dBi
Wi-Fi Standard Up to Wi-Fi 6
Power Save Yes
Wireless Security WPA2
Operating Temperature -10 to 45° C (14 to 113° F)
Operating Humidity 5 to 95% Noncondensing
Certifications FCC / IC
Supported Data Rates
802.11a 54 Mbps
802.11b 11 Mbps
802.11g 54 Mbps
802.11n 600 Mbps + 600 Mbps
802.11ac 1733 Mbps+ 3466 Mbps
802.11ax (Backbone) 1148 + 4804 Mbps
802.11ax (Available to Clients) 1148 + 4804 Mbps
Operating Frequency
US/CA 2412 - 2462
U-NII-1 5150 - 5250
U-NII-3 5725 - 5850
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING: Do not use this product in location that can be submerged by water.
WARNING: Avoid using this product during an electrical storm. There may be a
remote risk of electric shock from lightning.
AFi-ALN Quick Start Guide
2019/11/6 AFi-ALN Quick Start Guide
https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 15/17
Limited Warranty
ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual basis,
and, where applicable, specify arbitration instead of jury trials or class actions.
Compliance
FCC
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions.
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
The AmpliFi Router and MeshPoint have been approved by FCC under FCC ID: SWX-AFAR
(for Router); FCC ID: SWX-AFAP (for MeshPoint).
ISED Canada
CAN ICES-3(B)/NMB-3(B)
This device complies with ISED Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause
undesired operation of the device.
The AmpliFi Router and MeshPoint have been approved by ISED Canada under IC: 6545A-
AFAR (for Router); IC: 6545A-AFAP (for MeshPoint).
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems.
AFi-ALN Quick Start Guide
2019/11/6 AFi-ALN Quick Start Guide
https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 16/17
CAN ICES-3(B)/NMB-3(B)
Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. l’appareil ne doit pas produire de brouillage;
2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Le AMPLIFI Router et MeshPoints ont été approuvés par ISDE CanadaISED Canada en
vertu IC : 6545A-AFAR ( pour le routeur ) ; IC : 6545A-AFAP ( pour MeshPoint ).
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour
une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux
systèmes de satellites mobiles utilisant les mêmes canaux.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with radiation exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with minimum distance 27 cm between
the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
AVIS IMPORTANT :
Déclaration sur l’exposition aux rayonnements :
Cet équipement est conforme aux limites prévues pour l’exposition aux rayonnements
dans un environnement non contrôlé.
Lors de l’installation et de la mise en fonctionnement de l’équipement, assurez-vous qu’il
y ait une distance minimale de 27 cm entre l’élément rayonnant et vous.
Cet émetteur ne doit être installé à proximité d’aucune autre antenne ni d’aucun autre
émetteur, et ne doit être utilisé conjointement à aucun autre de ces appareils.
WEEE Compliance Statement
Declaration of Conformity
Online Resources
2019/11/6 AFi-ALN Quick Start Guide
https://dl.ui.com/qsg/TeamReview/Test/AFi-ALN/AFi-ALN_EN.html 17/17
© 2019 Ubiquiti Inc. All rights reserved.
AFi-ALN Quick Start Guide
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17

Ubiquiti AFi-ALN Guide de démarrage rapide

AFi-ALN
Ubiquiti
Marque
Ubiquiti
Modèle
AFi-ALN
Taper
Guide de démarrage rapide
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents