KitchenAid Food Processor KFP0722 Manuel utilisateur

Catégorie
Robots culinaires
Taper
Manuel utilisateur

Ce manuel convient également à

KFP0722
INSTRUCTIONS
INSTRUCTIONS
INSTRUCCIONES
W10625434A_FINAL.indd 1 1/9/14 10:42 AM
2
USA: 1.800.541.6390
Canada: 1.800.807.6777
WELCOME TO THE WORLD OF KITCHENAID.
We’re committed to helping you
create a lifetime of delicious meals for
family and friends. To help ensure the
longevity and performance of your
appliance, keep this guide handy. It will
empower you with the best way to
use and care for your product. Your
satisfaction is our #1 goal. Remember
to register your product online at
www.kitchenaid.com or by
mail using the attached
Product Registration Card.
Join us in the kitchen at www.kitchenaid.com.
Scan with your mobile device for recipes, tips, and more.
KitchenAid.com
KitchenAid.ca
W10625434A_FINAL.indd 2 1/9/14 10:42 AM
3
English
FOOD PROCESSOR INSTRUCTIONS
PROOF OF PURCHASE & PRODUCT REGISTRATION
Model Number ______________________________________________________________________
Serial Number ______________________________________________________________________
Date Purchased _____________________________________________________________________
Store Name ________________________________________________________________________
Always keep a copy of the itemized sales receipt showing the date of purchase of your
Food Processor. Proof of purchase will assure you of in-warranty service. Before you use
your Food Processor, please ll out and mail your product registration card packed with the
unit, or register online at www.kitchenaid.com. This card will enable us to contact you in the
unlikely event of a product safety notication and assist us in complying with the provisions
of the Consumer Product Safety Act. This card does not verify your warranty. Please
complete the following for your personal records:
TABLE OF CONTENTS
FOOD PROCESSOR SAFETY
Important safeguards .......................................................................................... 4
Electrical requirements ...................................................................................... 5
PARTS AND FEATURES
Parts and accessories .......................................................................................... 6
Accessories selection guide ................................................................................ 7
ASSEMBLING THE FOOD PROCESSOR
Before rst use ................................................................................................... 8
Attaching the work bowl .................................................................................... 8
Attaching the work bowl cover .......................................................................... 9
Installing the adjustable slicing disc ..................................................................... 9
Adjusting the slicing thickness........................................................................... 10
Installing the reversible shredding disc ............................................................. 10
Installing the multipurpose blade ...................................................................... 11
OPERATING THE FOOD PROCESSOR
Using the Food Processor ................................................................................ 12
Using the 2-in-1 feed tube ................................................................................ 13
Removing processed foods ............................................................................... 14
TIPS FOR GREAT RESULTS
Using the multipurpose blade ........................................................................... 15
Using a slicing or shredding disc ....................................................................... 16
Helpful hints ..................................................................................................... 17
CARE AND CLEANING
Cleaning the Food Processor ........................................................................... 18
TROUBLESHOOTING ......................................................................................... 19
WARRANTY .......................................................................................................... 20
W10625434A_FINAL.indd 3 1/9/14 10:42 AM
4
FOOD PROCESSOR SAFETY
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed, including the following:
1. Read all instructions.
2. To protect against risk of electrical shock, do not put Food Processor in water
or other liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug from the outlet when not in use, before putting on or taking off parts,
and before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug, or after the
appliance malfunctions, or is dropped or damaged in any manner. Return
appliance to the nearest Authorized Service Facility for examination, repair, or
electrical or mechanical adjustment.
7. The use of attachments not recommended or sold by KitchenAid may cause
re, electric shock, or injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter.
W10625434A_FINAL.indd 4 1/9/14 10:42 AM
5
English
FOOD PROCESSOR SAFETY
FOOD PROCESSOR SAFETY
Electrical requirements
10. Keep hands and utensils away from moving blades or discs while processing
food to reduce the risk of severe injury to persons or damage to the Food
Processor. A scraper may be used but must be used only when the Food
Processor is not running.
11. Blades are sharp. Handle carefully.
12. To reduce the risk of injury, never place cutting blade or discs on base without
rst putting bowl properly in place.
13. Be certain cover is securely locked in place before operating appliance.
14. Never feed food by hand. Always use the food pusher.
15. Do not attempt to defeat the cover interlock mechanism.
16. This product is designed for household use only.
SAVE THESE INSTRUCTIONS
Voltage: 120 VAC
Frequency: 60 Hz
NOTE: This Food Processor is equipped
with a polarized plug (one blade is wider than
the other). To reduce the risk of electrical
shock, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not
modify the plug in any way.
W10625434A_FINAL.indd 5 1/9/14 10:42 AM
6
PARTS AND FEATURES
Parts and accessories
Heavy-duty
base
7-cup (1.7 L)
work bowl
Reversible
(2 mm and 4 mm)
shredding disc
Externally
adjustable slicing
disc (thin to thick)
Multipurpose
stainless steel
blade
Work bowl
cover with
2-in-1 feed
tube
2-piece
food pusher
Disc adapter
Externally
adjustable
slicing control
W10625434A_FINAL.indd 6 1/9/14 10:42 AM
7
English
PARTS AND FEATURES
PARTS AND FEATURES
Accessories selection guide
Action Setting Food Accessory
Chop
Cheese
Chocolate
Fruit
Fresh herbs
Nuts
Tofu
Vegetables
Multipurpose stainless steel blade
Mince Puree
Mix
Pasta Sauce
Pesto
Salsa
Sauces
Slice
thin
Slice
thick
Fruit (soft)
Potatoes
Tomatoes
Vegetables (soft)
Externally adjustable slicing disc
A
d
j
u
s
t
a
b
l
e
S
l
i
c
i
n
g
(
t
h
i
n
t
o
t
h
i
c
k
)
Cheese
Chocolate
Fruit (hard)
Vegetables (hard)
Shred
medium
Shred
ne
Potatoes
Vegetables (soft)
Reversible shredding disc
+
Cabbage
Cheese
Chocolate
Fruit (hard)
Vegetables (hard)
W10625434A_FINAL.indd 7 1/9/14 10:42 AM
8
ASSEMBLING THE FOOD PROCESSOR
Before rst use
Attaching the work bowl
1
Grasp the feed tube on the work bowl
cover and turn it clockwise to remove it
from the work bowl.
Before using your Food Processor for the
first time, wash all parts and accessories
either by hand or in the dishwasher (see
“Cleaning the Food Processor” section).
Cut Hazard
Handle blades carefully.
Failure to do so can result in
cuts.
1
Place the work bowl on the base,
aligning the raised portion with the
indentation on the base. The center
hole should fit over the power shaft.
Power Shaft
2
Grasp the work bowl handle and turn
the bowl counterclockwise to lock it
on the base.
IMPORTANT: Place the Food Processor on a dry, level countertop with the controls
facing forward. Do not plug in the Food Processor until it is completely assembled.
W10625434A_FINAL.indd 8 1/9/14 10:42 AM
9
English
ASSEMBLING THE FOOD PROCESSOR
ASSEMBLING THE FOOD PROCESSOR
Attaching the work bowl cover
NOTE: Be sure to install the desired accessory before attaching the work bowl cover.
1
Place the work bowl cover on the work
bowl with the feed tube just to the left
of the work bowl handle. Grasp the feed
tube and turn the cover to the right until
it locks into place.
2
Fit the food pusher into the 2-in-1
feed tube. See “Using the 2-in-1 Feed
Tube” for details on working with
different sized foods.
NOTE: Your Food Processor will not operate unless the work bowl and work bowl cover
are properly locked on the base, and the large pusher is inserted to the maximum fill line
on the feed tube (approximately halfway down).
Installing the adjustable slicing disc
1
Hold the slicing disc by the finger grips
and lower it onto the drive adapter.
You may need to turn the disc/drive
adapter until it drops down into place.
2
Install the work bowl cover, being sure
it locks into place.
TIP: You may need to turn the disc/adapter until it drops down into place.
W10625434A_FINAL.indd 9 1/9/14 10:42 AM
10
Finger grip
ASSEMBLING THE FOOD PROCESSOR
ASSEMBLING THE FOOD PROCESSOR
Installing the reversible shredding disc
TIP: You may need to turn the disc/adapter until it drops down into place.
Adjusting the slicing thickness
NOTE: The lever only works with the
adjustable slicing disc. Changing thickness
settings with other discs or blades installed
will have no effect on operation.
1
Set the desired slicing thickness by
moving the lever to the left for thinner
slices or to the right for thicker slices.
Thicker
Thinner
1
Hold the or reversible shredding disc
by the 2 finger grips with the desired
shredding side facing UP. Insert the disc
adapter into the hole in the bottom of
the disc.
2
With the work bowl installed, slide the
drive adapter onto the power shaft.
3
Install the work bowl cover, being sure
it locks into place.
Drive
adapter
W10625434A_FINAL.indd 10 1/9/14 10:42 AM
11
English
ASSEMBLING THE FOOD PROCESSOR
ASSEMBLING THE FOOD PROCESSOR
Installing the multipurpose blade
1
Place the blade on the power shaft.
Rotate the blade so it falls into place on
the power shaft.
2
Push to lock: Press down firmly on the
multipurpose blade until it is down as
far as it will go. The multipurpose blade
features an internal seal that fits tightly
over the center of the work bowl.
3
Install the work bowl cover, being sure
it locks into place.
W10625434A_FINAL.indd 11 1/9/14 10:42 AM
12
OPERATING THE FOOD PROCESSOR
Before operating the Food Processor, be
sure the work bowl, blades, and work bowl
cover are properly assembled on the Food
Processor base (see “Assembling the Food
Processor” section).
Rotating Blade Hazard
Always use food pusher.
Keep ngers out of openings.
Keep away from children.
Failure to do so can result in
amputation or cuts.
Using the Food Processor
2
The pulse control allows precise
control of the duration and frequency
of processing. It’s great for jobs which
require a light touch. Just press and hold
the PULSE button to start processing at
high speed, and release it to stop.
NOTE: If the Food Processor fails to operate, make sure the work bowl and cover are
properly locked on the base (see “Assembling the Food Processor” section).
1
To turn on, press LOW or HIGH. The
Food Processor will run continuously
and the indicator light will glow.
This line on the work bowl indicates
the maximum level of liquid that can be
processed by the Food Processor.
W10625434A_FINAL.indd 12 1/9/14 10:42 AM
13
English
OPERATING THE FOOD PROCESSOR
OPERATING THE FOOD PROCESSOR
4
Wait until the blade or disc comes to
a complete stop before removing the
work bowl cover. Be sure to turn off the
Food Processor before removing the
work bowl cover, or before unplugging
the Food Processor.
3
When finished, press the OFF button.
The indicator light will go out and the
blade or disc will slow to a stop.
Using the 2-in-1 feed tube
The 2-in-1 feed tube features a 2-piece food
pusher. To slice or shred small items, insert
the 2-piece food pusher into the feed tube.
Use the small feed tube and pusher to
process small or slender items, like single
carrots or celery stalks.
To slowly drizzle oil into ingredients, just ll
the small pusher with the desired amount of
oil. A small hole in the bottom of the pusher
will drizzle the oil at a constant rate.
2-Piece
Food
Pusher
W10625434A_FINAL.indd 13 1/9/14 10:42 AM
14
USING THE FOOD PROCESSOR
TIPS FOR GREAT RESULTS
2
Turn the work bowl cover to the left
and remove.
5
The multipurpose blade can be
removed from the work bowl before
the contents are emptied. You may also
leave the blade locked in place. Then
remove food from the bowl and blade
with a spatula.
4
Turn the work bowl to the left to unlock
it from the base. Lift to remove.
1
Press the OFF Button and unplug the
Food Processor before disassembling.
Removing processed foods
Cut Hazard
Handle blades carefully.
Failure to do so can result in
cuts.
3
If using a disc, remove it before
removing the bowl. Holding the disc
by the 2 finger grips, lift it straight up,
then remove the adapter.
W10625434A_FINAL.indd 14 1/9/14 10:42 AM
15
English
USING THE FOOD PROCESSOR
TIPS FOR GREAT RESULTS
Using the multipurpose blade
To chop fresh fruits or
vegetables:
Peel, core, and/or remove seeds.
Cut food in 1 to 1
1
/2-inch (2.5-
3.75 cm) pieces. Process food
to desired size, using Low speed. Scrape
sides of bowl, if necessary.
To puree cooked fruits and vegetables
(except potatoes):
Add 1/4 cup (60 ml) liquid from recipe per
cup (235 ml) of food. Process food, using
short pulses, until nely chopped. Then
process continuously until reaching desired
texture. Scrape sides of bowl, if necessary.
To prepare mashed potatoes:
Shred hot cooked potatoes using the
shredding disc. Exchange shredding disc
for multipurpose blade. Add softened butter,
milk, and seasonings. Pulse 3 to 4 times,
2 to 3 seconds each time, until smooth
and milk is absorbed. Do not over process.
To chop dried (or sticky) fruits:
The food should be cold. Add 1/4 cup
(60 ml) our from recipe per 1/2 cup
(120 ml) dried fruit. Process fruit, using
short pulses, until reaching desired texture.
To nely chop citrus peel:
With sharp knife, peel colored portion
(without white membrane) from citrus.
Cut peel in small strips. Process until
nely chopped.
To mince garlic or to chop fresh herbs
or small quantities of vegetables:
With processor running, add food through
the feed tube. Process until chopped. For
best results, make sure work bowl and herbs
are very dry before chopping.
Cut Hazard
Handle blades carefully.
Failure to do so can result in
cuts.
To chop nuts or make nut butters:
Process up to 3 cups (710 ml) of nuts
to desired texture, using short pulses,
1 to 2 seconds each time. For a coarser
texture, process smaller batches, pulsing
1 or 2 times, 1 to 2 seconds each time.
Pulse more often for ner texture. For
nut butters, process continuously until
smooth. Store in refrigerator.
NOTE: Processing nuts and other hard
foods may scratch the surface finish on
the inside of the bowl.
To chop cooked or raw meat,
poultry, or seafood:
The food should be very cold. Cut in
1-inch (2.5 cm) pieces. Process up to
1 pound (455 g) at a time to desired size,
using short pulses, 1 to 2 seconds each
time. Scrape sides of bowl, if necessary.
To make bread, cookie, or
cracker crumbs:
Break food into 1
1
/2 to 2-inch (3.75-5 cm)
pieces. Process until ne. For larger pieces,
pulse 2 to 3 times, 1 to 2 seconds each
time. Then process until ne.
To melt chocolate in a recipe:
Combine chocolate and sugar from recipe
in work bowl. Process until nely chopped.
Heat liquid from recipe. With processor
running, pour hot liquid through the feed
tube. Process until smooth.
To grate hard cheeses, such as
Parmesan and Romano:
Never attempt to process cheese that
cannot be pierced with the tip of a sharp
knife. You can use the multi-purpose
blade to grate hard cheeses. Cut cheese
in 1-inch (2.5 cm) pieces. Place in work
bowl. Process, using short pulses, until
coarsely chopped. Process continuously
until nely grated. Pieces of cheese can
also be added through the feed tube while
the processor is running.
W10625434A_FINAL.indd 15 1/9/14 10:42 AM
16
TIPS FOR GREAT RESULTS
Using a slicing or shredding disc
To slice or shred fruits and vegetables
that are small, such as strawberries,
mushrooms, and radishes:
Position food vertically or horizontally in
layers within the feed tube. Fill feed tube
in order to keep food positioned properly.
Process using even pressure with the
food pusher. Or use the small feed tube
in the two-piece food pusher. Position
food vertically in the tube and use the
small food pusher to process food.
To slice uncooked meat or poultry,
such as stir-fry meats:
Cut or roll food to t feed tube. Wrap
and freeze food until hard to the touch,
30 minutes to 2 hours, depending on
thickness of food. Check to be sure you
can still pierce food with the tip of a sharp
knife. If not, allow to thaw slightly. Process
using even pressure with the food pusher.
To slice cooked meat or poultry,
including salami, pepperoni, etc.:
Food should be very cold. Cut in pieces
to t feed tube. Process food using rm,
even pressure with the food pusher.
To shred spinach and other leaves:
Stack leaves. Roll up and stand up in feed
tube. Process using even pressure with
the food pusher.
To shred rm and soft
cheeses:
Firm cheese should be very cold. For best
results with soft cheeses, such as mozzarella,
freeze 10 to 15 minutes before processing.
Cut to t feed tube. Process using even
pressure with the food pusher.
To slice or shred fruits or
vegetables that are long
and relatively small in
diameter, such as celery,
carrots, and bananas:
Cut food to
t feed tube
vertically or
horizontally, and
pack feed tube
securely to keep
food positioned
properly. Process
using even
pressure with
the food pusher.
Or use the small
feed tube in the
two-piece food
pusher. Position
food vertically in the tube and use the small
food pusher to process food.
To slice or shred fruits and vegetables
that are round, such as onions, apples,
and green peppers:
Peel, core, and remove seeds. Cut in halves
or quarters to t feed tube. Position in feed
tube. Process using even pressure with the
food pusher.
W10625434A_FINAL.indd 16 1/9/14 10:42 AM
17
English
TIPS FOR GREAT RESULTS
Helpful hints
To avoid damage to the blade or motor, do
not process food that is so hard or rmly
frozen that it cannot be pierced with the
tip of a sharp knife. If a piece of hard food,
such as a carrot, becomes wedged or
stuck on the blade, stop the processor and
remove the blade. Gently remove food
from the blade.
Do not overll work bowl. For thin
mixtures, ll work bowl up to 1/2 to 2/3
full. For thicker mixtures, ll work bowl
up to 3/4 full. For liquids, ll up to the
maximum level as described on page 12.
When chopping, the work bowl should
be no more than 1/3 to 1/2 full.
Position slicing discs so the cutting surface
is just to the right of the feed tube. This
allows the blade a full rotation before
contacting the food.
To capitalize on the speed of the
processor, drop ingredients to be chopped
through the feed tube while the processor
is running.
Different foods require varying degrees
of pressure for best shredding and slicing
results. In general, use light pressure
for soft, delicate foods (strawberries,
tomatoes, etc.), moderate pressure for
medium foods (zucchini, potatoes, etc.),
and rmer pressure for harder foods
(carrots, apples, hard cheeses, partially
frozen meats, etc.).
Soft and medium-hard cheese may spread
out or roll up on the shredding disc. To
avoid this, shred only well-chilled cheese.
Sometimes slender foods, such as carrots
or celery, fall over in the feed tube,
resulting in an uneven slice. To minimize
this, cut food in several pieces and
pack the feed tube with the food. For
processing small or slender items, the
small feed tube in the 2-piece food
pusher will prove especially convenient.
When preparing a cake or cookie batter
or quick bread, use the multipurpose
blade to cream fat and sugar rst. Add
dry ingredients last. Place nuts and
fruit on top of our mixture to prevent
overchopping. Process nuts and fruits,
using short pulses, until blended with
other ingredients. Do not overprocess.
When shredded or sliced food piles
up on one side of the bowl, stop the
processor and redistribute the food
using a spatula.
When food quantity reaches the bottom
of a slicing or shredding disc, remove the
food.
A few larger pieces of food may
remain on top of the disc after slicing
or shredding. If desired, cut these by
hand and add to mixture.
Use the spatula to remove ingredients
from the work bowl.
Organize processing tasks to minimize
bowl cleanup. Process dry or rm
ingredients before liquid ingredients.
To clean ingredients from the
multipurpose blade easily, just empty
the work bowl, replace the lid, and pulse
1 to 2 seconds to spin the blade clean.
After removing the work bowl cover,
place it upside down on the counter.
This will help keep the counter clean.
Your Food Processor is not designed
to perform the following functions:
- Grind coffee beans, grains, or
hard spices
- Grind bones or other inedible
parts of food
- Liquefy raw fruits or vegetables
- Slice hard-cooked eggs or unchilled
meats.
If any plastic parts should discolor due
to the types of food processed, clean
them with lemon juice.
W10625434A_FINAL.indd 17 1/9/14 10:42 AM
18
CARE AND CLEANING
2
Wipe the base and cord with a warm,
sudsy cloth, and wipe clean with a
damp cloth. Thoroughly dry with a soft
cloth. Do not use abrasive cleaners or
scouring pads.
3
All parts are top rack dishwasher
safe. Avoid laying the bowl on its side.
Thoroughly dry all parts after washing.
Use gentle dishwashing cycles such as
normal. Avoid high temperature cycles.
Cleaning the Food Processor
IMPORTANT: These BPA-free bowls
require special handling. If you choose to
use a dishwasher instead of hand washing,
please follow these guidelines.
1
Press the OFF Button, then unplug the
Food Processor before cleaning.
Cut Hazard
Handle blades carefully.
Failure to do so can result in
cuts.
NOTE: If washing the Food Processor
parts by hand, avoid the use of abrasive
cleansers or scouring pads. They may
scratch or cloud the work bowl and cover.
4
To prevent damage to the locking
system, always store the work bowl
and work bowl cover in the unlocked
position when not in use. Wrap the
power cord around the work bowl,
then secure the plug by clipping it
to the cord.
W10625434A_FINAL.indd 18 1/9/14 10:42 AM
19
English
CARE AND CLEANING
TROUBLESHOOTING
Food Processor doesn’t run:
Make sure that the bowl and lid are
properly aligned and locked in place and
the large food pusher is inserted in the
feed tube.
When using the large feed tube opening,
make sure that food is not above the Max.
Fill line on the feed tube.
Press only one button at a time. The Food
Processor will not operate if more than
one button is pressed at the same time.
Is the Food Processor plugged in?
Is the fuse in the circuit to the Food
Processor in working order? If you have
a circuit breaker box, be sure the circuit
is closed.
Unplug the Food Processor, then plug it
back into the outlet.
If the Food Processor is not at room
temperature, wait until it reaches room
temperature and retry.
Food Processor not shredding
or slicing properly:
Make sure the raised-blade side of
the disc is positioned face up on the
common adapter.
If using the adjustable slicing blade,
make sure it is set to the correct
thickness.
Make sure ingredients are suitable
for slicing or shredding. See “Tips for
Great Results” section.
If the work bowl cover won’t close
when using the disc:
Make sure the disc is installed correctly,
with the raised nub on top, and is
positioned properly on the drive adapter.
If the problem is not due to one of the
above items, see the “Warranty” section.
Do not return the Food Processor to the
retailer. Retailers do not provide service.
If your Food Processor should malfunction or fail to operate, check the following:
W10625434A_FINAL.indd 19 1/9/14 10:42 AM
20
WARRANTY
KitchenAid
®
Food Processor Warranty for the 50 United
States, the District of Columbia, Puerto Rico, and Canada
This warranty extends to the purchaser and any succeeding owner for Food Processor
operated in the 50 United States, the District of Columbia, Puerto Rico, and Canada.
Length of Warranty: One Year Full Warranty from date of purchase.
KitchenAid Will Pay
for Your Choice of:
Hassle-Free Replacement of your Food Processor.
See the next page for details on how to arrange for
service, or call the Customer eXperience Center
toll-free at1-800-541-6390.
OR
The replacement parts and repair labor costs to
correct defects in materials and workmanship.
Service must be provided by an Authorized
KitchenAid Service Center.
KitchenAid Will
Not Pay for:
A. Repairs when Food Processor is used in other
than normal single family home use.
B. Damage resulting from accident, alteration,
misuse or abuse.
C. Any shipping or handling costs to deliver your
Food Processor to an Authorized Service
Center.
D. Replacement parts or repair labor costs for
Food Processor operated outside the 50
United States, District of Columbia, Puerto
Rico, and Canada.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
IMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES
THAT MAY BE IMPOSED BY LAW ARE LIMITED TO ONE YEAR, OR THE SHORTEST
PERIOD ALLOWED BY LAW. SOME STATES AND PROVINCES DO NOT ALLOW
LIMITATIONS OR EXCLUSIONS ON HOW LONG AN IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS LASTS, SO THE ABOVE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU.
IF THIS PRODUCT FAILS TO WORK AS WARRANTED, CUSTOMER’S SOLE AND
EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT ACCORDING TO THE
TERMS OF THIS LIMITED WARRANTY. KITCHENAID AND KITCHENAID CANADA
DO NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES. This warranty gives you specic legal rights and you may also have other rights
which vary from state to state or province to province.
WARRANTY
W10625434A_FINAL.indd 20 1/9/14 10:42 AM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

KitchenAid Food Processor KFP0722 Manuel utilisateur

Catégorie
Robots culinaires
Taper
Manuel utilisateur
Ce manuel convient également à