AEG FSK93705P Manuel utilisateur

Catégorie
Lave-vaisselle
Taper
Manuel utilisateur

Ce manuel convient également à

USER
MANUAL
EN User Manual 2
Dishwasher
FR Notice d'utilisation 27
Lave-vaisselle
FSK93800P
CONTENTS
1. SAFETY INFORMATION.............................................................................................2
2. SAFETY INSTRUCTIONS.............................................................................................4
3. PRODUCT DESCRIPTION...........................................................................................6
4. CONTROL PANEL....................................................................................................... 7
5. PROGRAMMES............................................................................................................8
6. SETTINGS.....................................................................................................................9
7. OPTIONS....................................................................................................................12
8. BEFORE FIRST USE................................................................................................... 13
9. DAILY USE..................................................................................................................16
10. HINTS AND TIPS..................................................................................................... 18
11. CARE AND CLEANING.......................................................................................... 20
12. TROUBLESHOOTING.............................................................................................22
13. TECHNICAL INFORMATION................................................................................. 25
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfservice
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1.
SAFETY INFORMATION
Before the installation and use of the appliance,
carefully read the supplied instructions. The
www.aeg.com
2
manufacturer is not responsible for any injuries or
damages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and
accessible location for future reference.
1.1 Children and vulnerable people safety
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Do not let children play with the appliance.
Keep detergents away from children.
Keep children and pets away from the appliance when
the door is open.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
This appliance is intended to be used in household
and similar applications such as:
farm houses; staff kitchen areas in shops, offices
and other working environments;
by clients in hotels, motels, bed & breakfast and
other residential type environments.
Do not change the specification of this appliance.
The operating water pressure (minimum and
maximum) must be between 0.5 (0.05) / 8 (0.8) bar
(MPa)
Obey the maximum number of 13 place settings.
If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
Put the cutlery in the cutlery basket with the sharp
ends pointing down or put them in the cutlery drawer
in a horizontal position with the sharp edges down.
ENGLISH
3
Do not leave the appliance with the open door
unattended to avoid stepping accidentally onto it.
Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
Do not use high pressure water sprays and/or steam
to clean the appliance.
If the appliance has ventilation openings in the base,
they must not be covered e.g. by a carpet.
The appliance is to be connected to the water mains
using the new supplied hose-sets. Old hose sets must
not be reused.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
Remove all the packaging.
Do not install or use a damaged
appliance.
Do not install or use the appliance
where the temperature is less than 0
°C.
Follow the installation instruction
supplied with the appliance.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Make sure that the appliance is
installed below and adjacent to safe
structures.
2.2 Electrical connection
WARNING!
Risk of fire and electrical
shock.
The appliance must be earthed.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
Always use a correctly installed
shockproof socket.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need
to be replaced, this must be carried
out by our Authorised Service Centre.
Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
This appliance complies with the
E.E.C. Directives.
UK and Ireland only. This appliance is
fitted with a 13 A mains plug. If it is
necessary to change the mains plug
fuse, use only a 13 A ASTA (BS 1362)
fuse.
2.3 Water connection
Do not cause damage to the water
hoses.
Before connection to new pipes,
pipes not used for a long time, where
repair work has been carried out or
new devices fitted (water meters,
etc.), let the water flow until it is clean
and clear.
www.aeg.com
4
Ensure that there are no visible water
leaks during and after the first use of
the appliance.
The water inlet hose has a safety valve
and a sheath with an inner mains
cable.
WARNING!
Dangerous voltage.
If the water inlet hose is damaged,
immediately close the water tap and
disconnect the mains plug from the
mains socket. Contact the Authorised
Service Centre to replace the water
inlet hose.
2.4 Use
Do not sit or stand on the open door.
Dishwasher detergents are
dangerous. Obey the safety
instructions on the detergent
packaging.
Do not drink and play with the water
in the appliance.
Do not remove the dishes from the
appliance until the programme is
complete. Some detergent may
remain on the dishes.
The appliance can release hot steam
if you open the door while a
programme operates.
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
2.5 Internal light
WARNING!
Risk of injury.
This appliance has an internal lamp
that comes on when you open the
door and goes off when the door is
closed.
The lamp in this appliance is not
suitable for household room
illumination.
To replace the lamp, contact the
Service.
2.6 Disposal
WARNING!
Risk of injury or suffocation.
Disconnect the appliance from the
mains supply.
Cut off the mains cable and discard it.
Remove the door catch to prevent
children and pets to get closed in the
appliance.
ENGLISH
5
3. PRODUCT DESCRIPTION
5
4
9
67
13
12
11
10
14
2
3
1
8
1
Top spray arm
2
Upper spray arm
3
Lower spray arm
4
Filters
5
Rating plate
6
Salt container
7
Air vent
8
Rinse aid dispenser
9
Detergent dispenser
10
Comfort Lift basket
11
Trigger handle
12
Lower basket handle
13
Upper basket
14
Cutlery drawer
3.1 TimeBeam
The TimeBeam is a display that is shown
on the floor below the appliance door.
When the programme starts, the
programme duration comes on.
When the programme is completed,
0:00 and CLEAN come on.
When the delay start starts, the
countdown duration and DELAY
come on.
When the appliance has a
malfunction, an alarm code appears.
www.aeg.com6
When AirDry is activated
during the drying phase, the
projection on the floor may
not be completely visible. To
check the remaining time of
the running programme,
look at the control panel
display.
4. CONTROL PANEL
1 2 3 4
6 5
1
On/off button
2
Navigation key (up)
3
Display
4
Option key
5
OK key
6
Navigation key (down)
4.1 Key behaviour
Navigation keys (up and down)
Use these keys to scroll the lists and
information texts that show on the
display.
Option key
Short press will enter the option list.
Short press in the option list takes you
back to the programme list.
Short press in the settings list takes
you back to the option list.
Long press (3 sec.) when a delay start
or a programme is running will delete
the delay start, the programme and
options. The display shows the default
programme: ECO.
OK key
Short press: Confirms the selection of
the programme, options and settings.
Long press: Starts the MyFavourite
programme.
If no programme has been saved it
will display the setting Set
MyFavourite.
ENGLISH 7
5. PROGRAMMES
Programme Degree of soil
Type of load
Programme phases Options
Eco
1)
Normal soil
Crockery and cut-
lery
Prewash
Wash 50 °C
Rinses
Dry
ExtraHygiene
TimeSaver
XtraDry
AutoSense
45°-70°
2)
All
Crockery, cutlery,
pots and pans
Prewash
Wash from 45 °C
to 70 °C
Rinses
Dry
ExtraHygiene
XtraDry
PROZONE
50°-65°
3)
Mixed soil
Crockery, cutlery,
pots and pans
Prewash
Wash 50 °C and
65 °C
Rinses
Dry
TimeSaver
XtraDry
Intensive 70° Heavy soil
Crockery, cutlery,
pots and pans
Prewash
Wash 70 °C
Rinses
Dry
ExtraHygiene
TimeSaver
XtraDry
30 MIN 60°
4)
Fresh soil
Crockery and cut-
lery
Wash 60 °C
Rinses
ExtraHygiene
XtraDry
Glass 45° Normal or light
soil
Delicate crockery
and glassware
Wash 45 °C
Rinses
Dry
XtraDry
Extra Silent
5)
Normal soil
Crockery and cut-
lery
Prewash
Wash 50 °C
Rinses
Dry
XtraDry
www.aeg.com8
Programme Degree of soil
Type of load
Programme phases Options
Rinse & Hold
6)
All Prewash
1)
With this programme you have the most efficient use of water and energy consumption for crockery
and cutlery with normal soil. (This is the standard programme for test institutes).
2)
The appliance senses the degree of soil and the quantity of items in the baskets . It automatically ad-
justs the temperature and the quantity of water, the energy consumption and the programme duration.
3)
With this programme you can wash a load with mixed soil. Very heavy soil in the lower basket and
normal soil in the upper basket. The pressure and the temperature of the water in the lower basket are
higher than in the upper basket.
4)
With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
5)
This is the most silent programme. The pump works at a very low speed to decrease the level of noise.
Because of the low speed, the programme duration is long.
6)
With this programme you can quickly rinse dishes to prevent remains of food to bond on dishes and
odours to form in the appliance. Do not use detergent with this programme.
5.1 Consumption values
Programme
1)
Water
(l)
Energy
(kWh)
Duration
(min)
Eco 11 0.832 232
AutoSense 45°-70° 7 - 14 0.6 - 1.6 40 - 170
PROZONE 50°-65° 14 - 16 1.2 - 1.5 160 - 180
Intensive 70° 12.5 - 14.5 1.4 - 1.7 170 - 190
30 MIN 60° 10 0.9 30
Glass 45° 12 - 14 0.7 - 0.9 82-92
Extra Silent 9 - 10 1.1 - 1.3 230 - 250
Rinse & Hold 4 0.1 14
1)
The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
5.2 Information for test
institutes
For all the necessary information for test
performance, send an email to:
Write down the product number (PNC)
that is on the rating plate.
6. SETTINGS
6.1 Settings list
To see the settings list, select Settings in
the option list.
ENGLISH 9
Settings Values Description
MyFavourite List of programmes Set your favourite daily pro-
gramme. Refer to specific in-
formation provided in this
chapter.
AirDry ON (default value)
OFF
Set the automatic door
opening for all programmes
except Rinse & Hold. Refer
to the specific information
provided in this chapter.
End sound ON
OFF
Informs you when the pro-
gramme is completed.
Factory setting: off.
Key tones Off
Click
Beep
Set the sound of the keys
when pressed.
Volume From level 1 to level
10.
Adjustment of the sound vol-
ume.
Brightness From level 0 to level 9. Change the brightness of
the display.
Contrast From level 0 to level 9. Change the contrast of the
display.
Water hardness From level 1 to level
10.
Set the level of the water
softener according to the
water hardness in your area.
Factory setting: level 5.
Rinse aid level From level 0 to level 6.
Level 0 = no release of
rinse aid.
Set the level of the rinse aid
dispenser according to the
necessary quantity of rinse
aid.
Factory setting: level 4.
Languages List of languages. Set the preferred language.
Default language: English.
Display on floor List of colours. Set the colour of the Time-
Beam
Reset settings RESET Reset the appliance to facto-
ry settings.
6.2 How to change a setting
with 2 values (ON and OFF)
When a setting is changed it will remain
valid even if the programme is
completed or a running programme is
cancelled.
1. Press the Option key.
2. Select Settings.
3. Press the OK key.
4. Select the setting to change.
www.aeg.com10
5. Press the OK key to change the value
from ON to OFF or vice versa.
6. Press repeatedly the Option key until
the display shows the programme
list.
6.3 How to change a setting
with multiple values
When a setting is changed it will remain
valid even if the programme is
completed or a running programme is
cancelled.
1. Press the Option key.
2. Select Settings.
3. Press the OK key.
4. Select the setting to change.
5. Press the OK key to enter the next
level.
6. Select the new value.
7. Press the OK key to confirm.
8. Press repeatedly the Option key until
the display shows the programme
list.
6.4 Starting the MyFavourite
programme
1. Press and hold OK for about 3
seconds until the display shows the
MyFavourite setting.
2. Close the appliance door to start the
programme.
6.5 How to save the
MyFavourite programme
You can only save 1 programme at a
time. A new setting cancels the previous
one.
1. Press the Option key.
2. Select Settings.
3. Press the OK key.
4. Select MyFavourite.
5. Press the OK key.
The display shows the programme list.
6. Select a programme.
7. Press the OK key.
8. The display shows Add option and
Done.
Select Done if you want to save a
programme without options and
press the OK key.
Select Add option to add an
option to the programme and
press the
OK key to confirm.
Once an option has been
selected the display shows Add
option and Done. If you want to
select another option select again
Add option otherwise select
Done.
9. Press the OK key.
If the programme has the TimeSaver
option, you have to select Fast or
Normal.
10. Press the OK key to confirm.
The display confirms that the
MyFavourite programme has been
saved.
6.6 AirDry
AirDry improves the drying results with
less energy consumption.
While the drying phase
operates, a device opens the
appliance door. The door is
then kept ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
open. This can cause
damage to the appliance.
CAUTION!
In case of presence of
children, the AirDry system
can be deactivated if you
want to keep the door
closed in the end of the
cycle.
AirDry is automatically activated with all
programmes excluding Rinse & Hold.
ENGLISH
11
To improve the drying performance refer
to the XtraDry option or activate AirDry.
7. OPTIONS
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you select non compatible
options, the appliance
automatically deactivates
one or more of them. Only
the indicators of the still
active options are on.
7.1 Option list
Options Values Description
Delay start From 1 to 24 hours
OFF (default value)
The use of this option delays
the start of the programme.
XtraDry ON
OFF (default value)
The use of this option boosts
the drying performance. Re-
fer to specific information
provided in this chapter.
ExtraHygiene ON
OFF (default value)
The use of this option sani-
tizes cutlery and tableware.
During the last rinsing
phase, the temperature stays
at 70 °C for at least 10 mi-
nutes.
TimeSaver Fast
Normal (default value)
The use of this option de-
creases the duration of the
washing and drying phases
by approximately 50%. Refer
to specific information provi-
ded in this chapter.
Settings Enter appliance settings
7.2 How to set an option
The option list will show only the options
applicable to the currently selected
programme. Non applicable options are
not visible.
Some options are not compatible with
each other. When you set 2 options that
are not compatible with each other, the
appliance will automatically deactivate
one of the options.
When the programme is completed or is
cancelled the options are set to the
default values.
1. Press the Option key.
2. Select an option.
The display shows the option value
indicated in parenthesis.
3. Press the OK key to change the value
from OFF to ON or vice versa.
If the selected option is Delay start, when
you press the OK key the display shows
www.aeg.com12
the number of hours available for the
delay start. Select the number of hours
and press again the OK key to confirm.
4. To go back to the programme list,
press repeatedly the Option key until
the display shows the selected
programme.
7.3 XtraDry
Activate this option when you want to
boost the drying performance. With use
of this option, the duration of some
programmes, water consumption and
the last rinse temperature can be
affected.
The XtraDry option is a permanent
option for all programmes other than
Eco and need not to be selected at every
cycle.
Every time Eco is activated, XtraDry
option is off and needs to be chosen
manually. In other programmes, the
setting of XtraDry is permanent and it is
automatically used in next cycles. This
configuration can be changed at any
time.
Activating XtraDry option deactivates
TimeSaver.
7.4 TimeSaver
This option increases the pressure and
the temperature of the water.
The washing and drying phases are
shorter. The total programme duration
decreases by approximately 50%.
The washing results are the same as with
the normal programme duration but the
drying results can be less satisfactory.
The TimeSaver option is not applicable
to all programmes.
1. Scroll through the programme list
and select a programme.
2. Press the OK key to confirm.
If the TimeSaver option is applicable to
the selected programme, the display
shows the 2 conditions Fast and Normal
and the programme duration for each
condition:
Fast: TimeSaver activated. Press
the OK key to confirm.
Normal: TimeSaver deactivated.
Press the OK key to confirm.
8. BEFORE FIRST USE
The first time you activate the appliance
it is necessary to set the language.
Default language is English.
1. Set the language.
Press OK to confirm English.
Scroll the list of available
languages for a new language
and press OK to confirm.
2. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
3. Fill the salt container.
4. Fill the rinse aid dispenser.
5. Open the water tap.
6. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the
baskets.
When you start a programme, the
appliance can take up to 5 minutes to
recharge the resin in the water softener.
It seems that the appliance is not
working. The washing phase starts only
after this procedure is completed. The
procedure will be repeated periodically.
8.1 The water softener
The water softener removes minerals
from the water supply, which would have
a detrimental effect on the washing
results and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
ENGLISH
13
in your area. It is important to set the
right level of the water softener to assure
good washing results.
Water hardness
German de-
grees (°dH)
French degrees
(°fH)
mmol/l Clarke de-
grees
Water softener lev-
el
47 - 50 84 - 90 8.4 - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
<4 <7 <0.7 < 5
1
2)
1)
Factory setting.
2)
Do not use salt at this level.
Whether you use a standard detergent
or multi-tabs (with or without salt), set
the proper water hardness level to
keep the salt refill indicator active.
Multi-tabs containing salt
are not effective enough to
soften hard water.
8.2 The salt container
CAUTION!
Use rough salt designed for
dishwashers only. Fine salt
increases the risk of
corrosion.
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
How to fill the salt container
Make sure that the Comfort
Lift is empty and in raised
position.
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt
container (only for the first time).
3. Fill the salt container with dishwasher
salt (until it is full).
www.aeg.com14
4. Carefully shake the funnel by its
handle to get the last granules
inside.
5. Remove the salt around the opening
of the salt container.
6. Turn the cap of the salt container
clockwise to close the salt container.
CAUTION!
Water and salt can come out
of the salt container when
you fill it. After you fill the
salt container, immediately
start a programme to
prevent corrosion.
8.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
It is possible to set the released quantity
of rinse aid between level 1 (minimum
quantity) and level 6 (maximum quantity).
Level 0 deactivates the rinse aid
dispenser and no rinse aid is released.
Factory setting: level 4.
How to fill the rinse aid
dispenser
A
B
C
CAUTION!
Only use rinse aid
specifically designed for
dishwashers.
1.
Open the lid (C).
2. Fill the dispenser (B) until the rinse
aid reaches the marking ''MAX''.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the lid
locks into position.
Fill the rinse aid dispenser
when the indicator (A)
becomes clear.
When the rinse aid
dispenser needs refilling, the
display shows a message.
If you use multi-tablets and the drying
performance is satisfactory, the rinse aid
refill indication can be disabled by
setting the rinse aid level to 0.
We recommend to always
use rinse aid for better
drying performance, also in
combination with multi-
tablets containing rinsing
agent.
ENGLISH 15
9. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate
the appliance.
Make sure that the appliance is in
programme selection mode.
If the salt indicator is on, fill the
salt container.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
for the type of load and the degree
of soil.
9.1 Comfort Lift
CAUTION!
Do not sit on the rack. Do
not put excessive pressure
on the locked basket.
CAUTION!
Do not exceed the max load
capacity of 18 kg.
CAUTION!
Use only a detergent
specifically designed for
dishwashers.
To ensure correct unlocking,
lift the trigger handle
completely and the basket
slightly until the basket is
disengaged on both sides.
The Comfort Lift mechanism allows to lift
the lower rack up (to the second rack
level) and put it down to load and unload
dishes easily.
To move the lower basket from the lower
position:
1. To lift the basket pull the rack out of
the dishwasher by the rack handle.
The trigger handle should not be
used.
The basket is automatically locked on the
upper level. Load or unload the basket
carefully (refer to basket loading leaflet).
2. To lower the basket connect the
trigger handle with the basket frame
as shown below. Lift the trigger
handle and the rack up.
Once the trigger handle is lifted,
push the rack down. The mechanism
returns to its basic position on the
lower level.
There are two ways of lowering the
basket depending on the loading:
If there is a full load of plates
slightly push the basket down.
If the basket is empty or half-
loaded press the basket down.
www.aeg.com
16
9.2 Using the detergent
A
B
C
CAUTION!
Only use detergent
specifically designed for
dishwashers.
1.
Press the release button (A) to open
the lid (C).
2. Put the detergent, in powder or
tablets, in the compartment (B).
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid
locks into position.
9.3 Setting and starting a
programme
The Auto Off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation:
5 minutes after the completion of the
programme.
After 5 minutes if the programme has
not started.
Starting a programme
When you activate the appliance, the
display shows the programme list. The
programme ECO is always the default
programme.
1. Scroll the programme list and select
a programme.
2. Select applicable options if desired.
Once options are set, go back to the
programme list to start the selected
programme.
3. Press OK.
If the programme is applicable to the
option TimeSaver, you have to confirm
Fast or Normal.
4. Close the appliance door to start the
programme
How to delay the start of a
programme
It is not possible to set the delay start
with the MyFavourite programme.
1. Select a programme.
2. Press Option.
The display shows the option list.
3. Select Delay start.
4. Press OK.
5. Select the number of hours desired
for the delay start.
You can delay the start of a programme
from 1 to 24 hours.
6. Press OK to confirm.
7. You can select other applicable
options.
8. Press repeatedly Option until the
display shows the selected
programme.
9. Press OK.
10. Close the appliance door to start the
countdown of the delay start.
When the countdown is completed, the
programme starts automatically.
Opening the door while the
appliance operates
If you open the door while a programme
is running, the appliance stops. It may
affect the energy consumption and the
programme duration. When you close
the door, the appliance continues from
the point of interruption.
ENGLISH
17
If the door is opened for
more than 30 seconds
during the drying phase, the
running programme will end.
This will not happen if the
door is opened by AirDry.
CAUTION!
Do not try to close the
appliance door within 2
minutes after AirDry
automatically opens it, as
this may cause damage to
the appliance. If, afterwards,
the door is closed for
another 3 minutes, the
running programme ends.
Cancelling the delay start while
the countdown operates
When you cancel the delay start the
programme and the options are set to
their default values.
1. Open the appliance door.
2. Press and hold Option for about 3
seconds until the display shows: Stop
washing?.
Select Resume and press OK to
continue with the countdown.
Close the appliance door.
Select Stop and press OK to
cancel the delay start.
Cancelling a running
programme
When you cancel the running
programme the options are set to their
default values.
1. Open the appliance door.
2. Press and hold Option for about 3
seconds until the display shows: Stop
washing?.
Select Resume and press OK to
continue with the running
programme. Close the appliance
door.
Select Stop and press OK to
cancel the running programme.
End of the programme
All buttons are inactive except for the
on/off button.
1. Press the on/off button or wait for
the Auto Off function to
automatically deactivate the
appliance.
If you open the door before the
activation of Auto Off, the appliance
is automatically deactivated.
2. Close the water tap.
10.
HINTS AND TIPS
10.1 General
The following hints will ensure optimal
cleaning and drying results in daily use
and also help to protect the
environment.
Remove larger residues of food from
the dishes into the waste bin.
Do not pre-rinse dishes by hand.
When needed, use the prewash
programme (if available) or select a
programme with a prewash phase.
Always use the whole space of the
baskets.
When loading the appliance, make
sure that the dishes can be
completely reached and washed by
the water released from the spray arm
nozzles. Make sure that items do not
touch or cover each other.
You can use dishwasher detergent,
rinse aid and salt separately or you
can use the multi-tablets (e.g. ''3in1'',
''4in1'', ''All in 1''). Follow the
instructions written on the packaging.
Select the programme according to
the type of load and degree of soil.
With the ECO programme you have
the most efficient use of water and
energy consumption for crockery and
cutlery with normal soil.
10.2 Using salt, rinse aid and
detergent
Only use salt, rinse aid and detergent
for dishwasher. Other products can
cause damage to the appliance.
In areas with hard and very hard water
we recommend to use plain
www.aeg.com
18
dishwasher detergent (powder, gel,
tablets containing no additional
agents), rinse aid and salt separately
for optimal cleaning and drying
results.
At least once a month run the
appliance with the use of appliance
cleaner which is particularly suitable
for this purpose.
Detergent tablets do not fully dissolve
with short programmes. To prevent
detergent residues on the tableware,
we recommend that you use the
tablets with long programmes.
Do not use more than the correct
quantity of detergent. Refer to the
instructions on the detergent
packaging.
10.3 What to do if you want to
stop using multi-tablets
Before you start to use separately
detergent, salt and rinse aid do the
following procedure.
1. Set the highest level of the water
softener.
2. Make sure that the salt and rinse aid
containers are full.
3. Start the shortest programme with a
rinsing phase. Do not add detergent
and do not load the baskets.
4. When the programme is completed,
adjust the water softener according
to the water hardness in your area.
5. Adjust the released quantity of rinse
aid.
6. Activate the rinse aid empty
notification.
10.4 Loading the baskets
Only use the appliance to wash items
that are dishwasher-safe.
Do not put in the appliance items
made of wood, horn, aluminium,
pewter and copper.
Do not put in the appliance items that
can absorb water (sponges,
household cloths).
Remove larger residues of food from
the dishes into the waste bin.
Make soft the remaining burned food
on the items.
Put hollow items (cups, glasses and
pans) with the opening down.
Make sure that glasses do not touch
other glasses.
Put cutlery and small items in the
cutlery drawer.
Put light items in the upper basket.
Make sure that the items do not
move.
Make sure that the spray arms can
move freely before you start a
programme.
10.5 Before starting a
programme
Make sure that:
The filters are clean and correctly
installed.
The cap of the salt container is tight.
The spray arms are not clogged.
There is dishwasher salt and rinse aid
(unless you use multi- tablets).
The position of the items in the
baskets is correct.
The programme is applicable for the
type of load and for the degree of
soil.
The correct quantity of detergent is
used.
10.6 Unloading the baskets
1. Let the tableware cool down before
you remove it from the appliance.
Hot items can be easily damaged.
2. First remove items from the lower
basket, then from the upper basket.
At the end of the program
water can still remain on the
sides and on the door of the
appliance.
ENGLISH 19
11. CARE AND CLEANING
WARNING!
Before maintenance,
deactivate the appliance and
disconnect the mains plug
from the main socket.
Dirty filters and clogged
spray arms decrease the
washing results. Make a
check regularly and, if
necessary, clean them.
11.1 Cleaning the filters
The filter system is made of 3 parts.
C
B
A
1. Turn the filter (B) counterclockwise
and remove it.
2. Remove the filter (C) out of filter (B).
3. Remove the flat filter (A).
4. Wash the filters.
5. Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6. Put back in place the flat filter (A).
Make sure that it is correctly
positioned under the 2 guides.
7. Reassemble the filters (B) and (C).
8. Put back the filter (B) in the flat filter
(A). Turn it clockwise until it locks.
www.aeg.com
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

AEG FSK93705P Manuel utilisateur

Catégorie
Lave-vaisselle
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues