GE ZV1050SFSS Le manuel du propriétaire

ZV1050SFSS
GE
Marque
GE
Modèle
ZV1050SFSS
Catégorie
Hottes
Taper
Le manuel du propriétaire

Ce manuel convient également à

OWNER’S
MANUAL
Stainless Steel Range Hood
Monogram.com
2 49-80612-3
Consumer Information
Stainless Steel Hood
Contents
Introduction
Your new Monogram stainless steel hood makes an eloquent statement of style, convenience
and kitchen planning flexibility. Whether you chose it for its purity of design, assiduous attention
to detail - or for both of these reasons - you’ll find that your Monogram stainless steel hood’s
superior blend of form and function will delight you for years to come.
Your Monogram stainless steel hood was designed to provide the flexibility to blend in with your
kitchen cabinetry. Its sleek design can be beautifully integrated into the kitchen.
The information on the following pages will help you operate and maintain your stainless steel
hood properly.
Consumer Information ................2
Safety Information ....................4
Controls and Features
Controls .............................6
Implement Holders ....................6
Care and Cleaning
For your safety .......................7
Metal grease filter .....................7
Hood surfaces ........................7
Light bulbs ...........................8
Troubleshooting Tips .................9
Warranty ...........................11
Consumer Support ..................12
49-80612-3 3
Consumer Information
Stainless Steel Hood
Before
using your
stainless
steel hood
Write
down the
model
& serial
numbers
If you received
a damaged
hood
Save time
& money
If you need
service
You’ll find them on a label behind the filters.
These numbers are also on the Consumer
Product Ownership Registration Card packed
separately with your hood.
Before sending in this card, please write
these numbers here:
Model Number
Serial Number
Use these numbers in any correspondence or
service calls concerning your hood.
Immediately contact the dealer (or builder) that
sold you the hood.
Before you request service, check the Problem
Solver in the back of this manual.
It lists causes of minor operating problems that
you can correct yourself.
To obtain service, see the Consumer Services
page in the back of this manual.
We’re proud of our service and want you to be
pleased. If for some reason you are not happy
with the service you receive, here are some
steps to follow for further help.
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased. In
most cases, this will solve the problem.
NEXT, if you are still not pleased, write all the
details—including your phone number—to:
Manager, Customer Relations
Monogram
Appliance Park
Louisville, KY 40225
Read this manual carefully. It is intended
to help you operate and maintain your new
stainless steel hood properly.
Keep it handy for answers to your questions.
If you don’t understand something or need
more help, there is a list of toll-free consumer
service numbers included in the back section
of this manual.
OR
Visit our Website at: Monogram.com
4 49-80612-3
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
READ AND SAVE THESE INSTRUCTIONS
WARNING
Read all safety instructions before using the product. Failure to follow these instructions may result
in fire, electrical shock, serious injury or death.
WARNING
GENERAL SAFETY INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
A. Use this unit only in the manner intended by the
manufacturer. If you have questions, contact the
manufacturer.
B. Before servicing or cleaning unit, switch power off at
service panel and lock the service disconnecting means
to prevent power from being switched on accidentally.
When the service disconnecting means cannot be
locked, securely fasten a prominent warning device,
such as a tag, to the service panel.
C. Do not use this unit with any solid-state speed-control
device.
D. This unit must be grounded.
CAUTION
FOR GENERAL VENTILATING USE
ONLY. DO NOT USE TO EXHAUST HAZARDOUS OR
EXPLOSIVE MATERIALS AND VAPORS.
WARNING
TO REDUCE THE RISK OF INJURY TO
PERSONS IN THE EVENT OF A RANGE TOP GREASE
FIRE, OBSERVE THE FOLLOWING*:
A. SMOTHER FLAMES with a close-fitting lid, cookie sheet,
or metal tray, then turn off the burner. BE CAREFUL TO
PREVENT BURNS. If the flames do not go out immediately,
EVACUATE AND CALL THE FIRE DEPARTMENT.
B. NEVER PICK UP A FLAMING PAN—You may be burned.
C. DO NOT USE WATER, including wet dishcloths or
towels—a violent steam explosion will result.
D. Use an extinguisher ONLY if:
1. You know you have a Class ABC extinguisher, and
you already know how to operate it.
2. The fire is small and contained in the area where it
started.
3. The fire department is being called.
4. You can fight the fire with your back to an exit.
*Based on “Kitchen Fire safety Tips” published by NFPA.
WARNING
TO REDUCE THE RISK OF A RANGE
TOP GREASE FIRE:
A. Never leave surface units unattended at high or medium
settings. Boilovers cause smoking and greasy spillovers
that may ignite. Heat oils slowly on low or medium settings.
B. Always turn hood ON when cooking at high heat or when
flambéing food (i.e. Crepes Suzette, Cherries Jubilee,
Peppercorn Beef Flambé).
C. Clean ventilating fans frequently. Grease should not be
allowed to accumulate on fan or filter.
D. Use proper pan size. Always use cookware appropriate
for the size of the surface element.
WARNING
TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
A. Installation work and electrical wiring must be done by
qualified person(s) in accordance with all applicable
codes and standards, including fire-related construction.
B. Sufficient air is needed for proper combustion and
exhausting of gases through the flue (chimney) of fuel
burning equipment to prevent back drafting. Follow the
heating equipment manufacturer’s guideline and safety
standards such as those published by the National Fire
Protection Association (NFPA), and the American Society
for Heating, Refrigeration and Air Conditioning Engineers
(ASHRAE), and the local code authorities. When
applicable, install any makeup (replacement) air system
in accordance with local building code requirements. Visit
Monogram.com for available makeup air solutions.
C. When cutting or drilling into wall or ceiling, do not
damage electrical wiring and other hidden utilities.
D. Ducted fans must always be vented to the outdoors.
WARNING
TO REDUCE THE RISK OF FIRE, USE
ONLY METAL.
Ŷ
Do not attempt to repair or replace any part of your hood
unless it is specifically recommended in this manual. All
other servicing should be referred to a qualified technician.
49-80612-3 5
CONSIGNES DE SÉCURITÉ IMPORTANTES
VEUILLEZ LIRE TOUTES LES CONSIGNES AVANT D’UTILISER L’APPAREIL
LISEZ CES INSTRUCTIONS ET RANGEZ-LES SOIGNEUSEMENT
AVERTISSEMENT
Veuillez lire toutes les consignes avant d’utiliser ce produit. Le non-respect de ces instructions pourrait
entraîner un incendie, un choc électrique, une blessure grave voire la mort.
AVERTISSEMENT
CONSIGNES GÉNÉRALES DE SÉCURITÉ
AVERTISSEMENT
POUR RÉDUIRE LE RISQUE
D’INCENDIE, DE SECOUSSE ÉLECTRIQUE OU DE BLESSURE ,
OBSERVEZ LES PRÉCAUTIONS SUIVANTES :
A. N’utilisez cet appareil que de la manière prévue par le fabricant.
Si vous avez des questions,appelez le fabricant.
B. Avant de réparer ou de nettoyer votre appareil,débranchez
le courant au niveau du panneau de service et verrouillez les
mécanismes de débranchement de service pour éviter tout
branchement accidentel au courant. Si vous ne pouvez pas
verrouiller les mécanismes de débranchement de service,
attachez soigneusement un avertissement bien visible,comme
une étiquette, au panneau de service.
C. N’utilisez jamais cet appareil avec un mécanisme de réglage de la
vitesse à semi-conducteurs.
D. Cet appareil doit être bien mis à la terre.
ATTENTION
UNIQUEMENT À USAGE DE VENTILATION
GÉNÉRALE. N’UTILISEZ JAMAIS POUR L’ÉCHAPPEMENT
DE MATIÈRES ET DE VAPEURS EXPLOSIVES.
AVERTISSEMENT
POUR RÉDUIRE LE RISQUE DE
BLESSURE CORPORELLE SI DE LA GRAISSE PREND FEU
SUR LA SURFACE DE CUISSON DU FOUR,SUIVEZ LES
INSTRUCTIONS SUIVANTES*:
A. ÉTOUFFEZ LES FLAMMES avec un couvercle qui convient, une
tôle à biscuits ou un plateau en métal, puis éteignez le brûleur.
FAITES BIEN ATTENTION DE NE PAS VOUS BRÛLER. Si
les flammes ne s’éteignent pas immédiatement,SORTEZ ET
APPELEZ LES POMPIERS.
B. NE DÉPLACEZ JAMAIS UNE CASSEROLLE QUI FLAMBE—
Vous pouvez vous brûler.
C. N’UTILISEZ JAMAIS D’EAU, en particulier de serviette ou de
chiffon mouillé—il se produira une explosion violente de vapeur
brûlante.
D. N’UTILISEZ UN EXTINCTEUR que si :
1. Vous avez un extincteur de classe ABC et vous savez
comment l’utiliser;
2. Le feu est réduit et confiné à l’endroit où il a commencé;
3. Vous avez déjà appelé les pompiers;
4. Vous combattez les flammes en tournant le dos à une sortie.
* Basé sur l’ouvrage intitulé «Kitchen Fire SafetyTips» publié par la
NFPA.
AVERTISSEMENT
RÉDUISEZ LE RISQUE D’UN FEU DE
GRAISSESUR LA SURFACE DE CUISSON DU FOUR:
A. Ne laissez jamais sans surveillance les unités decuisson de surface
à une température élevée. Le bouillonnement occasionne des
débordements fumants et graisseux qui peuvent prendre feu. Chauffez
à feu doux les substances huileuses, avec un réglage bas ou moyen.
B. Mettez toujours la hotte en marche quand vous cuisinez à haute
température ou quand vous faites flamber des aliments (p. ex.
crèpes Suzette,cerises Jubilee, Bœuf flambé Peppercorn).
C. Nettoyez les mécanismes de ventilation fréquemment. Il ne faut
pas permettre une accumulation de graisse sur le ventilateur ou
sur le filtre.
D. Utilisez une casserole de bonne taille. Utilisez toujours un ustensile
de cuisine qui convienne au diamètre de l’élément de cuisson.
AVERTISSEMENT
POUR RÉDUIRE LE RISQUE
D’INCENDIE, DE SECOUSSE ÉLECTRIQUE OU DE BLESSURE
CORPORELLE, OBSERVEZ LES PRÉCAUTIONS SUIVANTES :
A. Vous devez faire exécuter tous les travaux d’installation et de
câblage électrique par une personne qualifiée, conformément à
tous les codes et les normes en vigueur, en particulier ceux de
construction relatifs aux incendies.
B. Vous devez assez d’air pour avoir une bonne combustion et
permettre l’évacuation des gaz par le conduit de cheminée du
matériel de combustion du carburant, afin d’éviter tout retour d’air.
Suivez les directives du fabricant de matériel de combustion et
les normes de sécurité comme celles publiées par la National Fire
Protection Association (NFPA) et l’American Society for Heating,
Refrigeration and Air Conditioning Engineers (ASHRAE), ainsi
que les modalités des codes locaux
. Le cas échéant, installez un
système de compensation d’air (remplacement) conformément
aux conditions des codes locaux du bâtiment. Visitez le site
Monogram.com pour connaître les solutions offertes en matière
de système de compensation d’air.
C. Si vous faites un trou ou une ouverture dans un mur ou un
plafond, n’endommagez pas les fils électriques et les autres
installations cachées de service public.
D. Vous devez toujours alimenter les ventilateurs dans les conduits
en air en provenance de l’extérieur.
AVERTISSEMENT
POUR RÉDUIRE LE RISQUE
D’INCENDIE,N’UTILISEZ QUE DES CONDUITS EN MÉTAL.
Ŷ
N’essayez jamais de remplacer ou de réparer un élément de votre
hotte si le présent manuel ne le recommande pas expressément.
Tout autre entretien doit être effectué par un technicien qualifié.
6 49-80612-3
Controls and Features
Stainless Steel Hood
Controls
NOTE: Avoid using food products that produce
flames under the range hood.
1 ON/OFF. It remembers the last fan speed
used. (Four speed fan.)
2 Lowers the speed.
3 Increases the speed.
4 Highest speed “instant on” BOOST.
NOTE: BOOST fan speed can only be selected
with this pad. BOOST is not obtainable by
using the increase fan speed
pad.
5 'HOD\HGIDQVKXWRႇ&KRRVHRU
minutes by pushing this button.
6 Light ON/OFF. It remembers the last light
level used. (Six light levels.)
7 Dims the light.
8 Brightens the light.
9 Clean Filter Light
Lights after 30 hours of “on” time to remind
\RXWRFOHDQWKHPHWDOJUHDVH¿OWHUV7KH
UHGOLJKWJORZVXQWLOWKH¿OWHUVDUHUHPRYHG
cleaned if necessary and replaced. If the
OLJKWLVJORZLQJDIWHUWKH¿OWHUVKDYHEHHQ
replaced, adjust them to make sure they
DUHFRUUHFWO\VHDWHGLQWKH¿OWHUFKDQQHOV
Then the timer resets automatically.
10 Fan indicator.
11 Indicates the time the fan is set to run,
EHIRUHDXWRPDWLFDOO\VKXWWLQJRႇRU
20 minutes).
Implement
Holders
Implement holder rods are on each side of the
hood.
Use these rods to hang and display cooking
utensils such as whisks, spoons, forks or any
non-flammable decorative items. Frequently
used small pots and pans can also hang from
these rods.
WARNING
DO NOT hang flammable items from these
implement rods.
DO NOT hang items weighing more than 10
pounds on either side, or 20 pounds total
weight.
49-80612-3 7
Care and Cleaning
Stainless Steel Hood
For your
safety
Pour votre
securité
Before servicing or cleaning the unit, switch
power off at the service panel and lock the
service panel to prevent power from being
switched on accidentally. If the service
panel cannot be locked, securely fasten a
prominent warning device, such as a tag, to
the service panel.
Avant de réparer ou de nettoyer votre
appareil, débranchez le courant au niveau
du panneaude service et verrouillez les
mécanismes de débranchement de service
pour éviter tout branchement accidentel au
courant. Si vous ne pouvez pas verrouiller les
mécanismes de débranchement de service,
attachez soigneusement un avertissement
bien visible,comme une étiquette, au
panneau de service.
Metal grease
filter
Hood
surfaces
Clean the grease filter after 30 hours of “on”
time. A red signal light will alert you when 30
hours has passed.
Remove the grease filters and wash them
either by hand or in the dishwasher using
nonabrasive soap.
To clean, swish the filters in hot soapy water
or wash them in the dishwasher. Do not use
abrasive cleansers.
Replace the filters and make sure that they
are correctly seated in the filter channels.
Adjust as necessary until the red signal light
stops glowing.
Do not use a steel-wool pad; it will scratch
the surface.
To clean the stainless steel surface, use warm,
sudsy water or a stainless steel cleaner or
polish. Always wipe the surface in the direction
of the grain.
Follow the cleaner instructions for cleaning
the stainless steel surface. To inquire about
purchasing stainless steel appliance cleaner
or polish or to find the location of a dealer
nearest you, please call our toll-free number:
Monogram Preferred Service: 800.444.1845
Monogram.com
NOTE:7RUHPRYH¿OWHUV
push them back and
down using the knob.
Front
)RUSURSHURSHUDWLRQPDNHVXUHWKH¿OWHUV
are securely seated into the channels.
8 49-80612-3
Care and Cleaning
Stainless Steel Hood
Light bulbs
NOTE: The glass cover should be removed
only when cool.
CAUTION
Before replacing the bulb, disconnect electrical
power to the hood at the main fuse or circuit
breaker or main power disconnect switch
located on the control housing. Allow bulbs to
cool before touching.
For safety, do not touch a hot bulb with bare
hands or a damp cloth.
To change the light bulbs:
1. Remove the lamp lens cover by inserting a
small flat-blade screwdriver into each of the
three slots and gently prying it free.
NOTE: Do not remove the outer trim ring
(lamp assembly).
2. Grasp the bulb and pull it straight out.
3. Using gloves or a dry cloth, remove the new
bulb from the packaging. (Wearing latex
gloves may offer a better grip.) The bulb
must be the same wattage, 120-volt, 25-watt
halogen with a G-9 base. Early-life bulb
failure may occur if wattage is too high.
4. Push the bulb straight all the way into the
receptacle.
5. Replace the lens cover by inserting the
three retaining tabs into the slots and
pressing into place.
NOTE: For improved lighting, clean the glass
cover frequently using a damp cloth. This should
be done when the hood is completely cool.
6. Reconnect electrical power to the hood.
NOTE: Order replacement 120-volt, 25-watt
halogen bulb with G-9 base, WB25X10020.
These bulbs can be ordered from your
Monogram supplier.
NOTE: Make sure the tabs are inserted into
the slots.
ONLY use a new 120-volt, 25-watt halogen
bulb with a G-9 base.
NOTE: Do not touch the new halogen bulb
with bare fingers. Skin oils can cause early-life
bulb failure.
On some models, the lights are located on
the sides, on the underside of the hood.
On some models, the lights are located on the
front and back, on the underside of the hood.
Receptacle
Use gloves
or cloths
Outer trim ring
(lamp assembly)
Do not remove
Bulb
Removable inner
lamp lens cover
Tab
Use a small flat-blade screwdriver
to remove the lamp lens cover.
49-80612-3 9
Before you
call for service
Save time and money! Review the charts on the following pages first and you may not need to
call for service.
Troubleshooting Tips
Stainless Steel Hood
Problem Possible Cause What To Do
Fan and lights do
not operate
This hood is equipped with a main
power disconnect switch. It is
located behind the grease filters
on the right side of the hood on the
control housing.
Flip this switch and press Fan/Light
buttons again.
A fuse may be blown or a circuit
breaker tripped.
Replace fuse or reset circuit breaker.
The blower connector is loose or not
plugged into its mating connector.
Disconnect power to the unit. Locate
blower and cable coming from it. Follow
cable until you find the connector. Make
sure each blower connector is securely
plugged, one into the other.
Fan keeps going off
and on
The motor is probably overheating
and turning itself off. This can be
harmful to the motor.
Check to be sure the filter is clean. If off
and on cycling continues, call for service.
Loud or abnormal
airflow noise
Wrong size duct used in installation. This hood requires 8” ducting and a
maximum duct length of 100 equivalent
feet to perform optimally. Using smaller
duct pipe or longer equivalent lengths of
duct pipe will cause improper venting.
Monogram service technicians cannot
correct this issue if installed improperly.
Fan fails to circulate
air or moves air
slower than normal
and/or fan is making
loud or abnormal
airflow noise
Make sure nothing is blocking the vent,
including bird & other nests or fallen
pieces of dry wall.
Damper blade in hood exhaust outlet
or at wall/roof cap may be stuck.
Make sure all damper blades open freely.
Make sure installer has used the correct
size duct, not exceeded the recommend
equivalent length of ducting and all duct
pieces are properly connected and sealed.
Non-rigid duct work is prohibited in
these applications.
If used, look for kinks or other restrictions.
Metal grease filters and/or charcoal
filters (if present) may be dirty.
Clean the metal grease filter and replace
charcoal filter (if present). See Care and
Cleaning instructions.
Sufficient makeup (replacement) air
is required for exhausting appliances
to operate to rating.
Check with local building codes, which
may require or strongly advise the use
of makeup air. Visit Monogram.com for
available makeup air solutions.
The hood controls
are not operating
correctly
Control logic confused. Disconnect power to the hood by resetting
the circuit breaker. Wait 30 seconds to
allow controls to reset.
Early-life bulb failure Replacing bulbs with bare hands. Replace bulbs while wearing gloves to
keep skin oils off bulbs.
Bulb wattage is too high. Replace with correct wattage.
10 49-80612-3
Notes
Stainless Steel Hood
Notes
49-80612-3 11
Warranty
Stainless Steel Hood
EXCLUSION OF IMPLIED WARRANTIES
Your sole and exclusive remedy is product repair as provided in this Limited Warranty. Any implied
warranties, including the implied warranties of merchantability or fitness for a particular purpose, are
limited to one year or the shortest period allowed by law.
WHAT IS
COVERED
From the Date
of the Original
Purchase
LIMITED TWO-YEAR WARRANTY
For two years from date of original purchase, we will provide, free of charge, parts and service labor in your
home to repair or replace any part of the vent hood that fails because of a manufacturing defect.
This warranty is extended to the original purchaser and any succeeding owner for products purchased for
ordinary home use in the 48 mainland states, Hawaii, Washington, D.C. or Canada. If the product is located
in an area where service by a Monogram Authorized Servicer is not available, you may be responsible for
a trip charge or you may be required to bring the product to an Authorized Monogram Service location for
service. In Alaska the warranty is the same except that it is LIMITED because you must pay to ship the
product to the service shop or for the service technician’s travel costs to your home.
All warranty service will be provided by our Factory Service Centers or by our authorized Customer Care®
servicers during normal working hours.
Should your appliance need service, during warranty period or beyond, in the USA call 800.444.1845. In
Canada: 888.880.3030. Please have your serial number and model number available when calling for service.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
To know what your legal rights are in your state, consult your local or state consumer affairs office or your
state’s Attorney General.
Warrantor: GE Appliances, a Haier company
Warrantor in Canada: MC COMMERCIAL INC, Burlington, ON, L7R 5B6
WHAT IS NOT
COVERED
Ŷ Service trips to your home to teach you how to
use the product.
Ŷ Replacement of house fuses or resetting
of circuit breakers.
Ŷ Incidental or consequential damage caused by
possible defects with this appliance.
Ŷ Replacement of the replaceable filters.
Ŷ Damage to the product caused by accident,
fire, floods or acts of God.
Ŷ Damage caused after delivery.
Ŷ Failure of the product if it is used for other than
its intended purpose or used commercially.
Ŷ Improper installation. If you have an installation
problem, contact your dealer or installer.
You are responsible for providing adequate
electrical, gas, exhausting and other connecting
facilities as described in the Installation
Instructions provided with the product.
Ŷ Product not accessible to provide required
service.
Ŷ Installation or service for a makeup
(replacement) air system.
YOUR MONOGRAM VENT HOOD WARRANTY
Staple sales slip or cancelled check here. Proof of original purchase date
is needed to obtain service under warranty.
12 49-80612-3
Consumer Support
Stainless Steel Hood
49-80612-3
02-18 GEA
Printed in Italy
With the purchase of your new Monogram appliance, receive the
assurance that if you ever need information or assistance from
Monogram, we will be there. All you have to do is call!
Register Your
Appliance
Register your new appliance on-line at your convenience! Timely product registration will allow for
enhanced communication and prompt service under the terms of your warranty, should the need
arise. You may also mail in the pre-printed registration card included in the packing material.
In the US: Monogram.com
In Canada: Prodsupport.mabe.ca/crm/Products/ProductRegistration.aspx
Schedule Service
Expert Monogram repair service is only one step away from your door. Get on-line and schedule
your service at your convenience any day of the year.
In the US: Monogram.com
or call 800.444.1845 during normal business hours.
In Canada: GEAppliances.ca/en/support/service-request or call 888.880.3030
Extended
Warranties
Remote
Connectivity
Parts and
Accessories
Purchase a Monogram extended warranty and learn about special discounts that are available while
your warranty is still in effect.
In the US: Monogram.com
or call 800.444.1845 during normal business hours.
In Canada: GEAppliances.ca/en/support/purchase-extended-warranty or call 888.880.3030
For assistance with wireless network connectivity (for models with remote enable),
visit our website at
Monogram.com
or call
800.444.1845
in the US only.
Individuals qualified to service their own appliances can have parts or accessories sent directly to
their homes (VISA, MasterCard and Discover cards are accepted). Order on-line today 24 hours
every day.
In the US: Monogram.com or by phone at 800.444.1845 during normal business hours.
Instructions contained in this manual cover procedures to be performed by any user. Other
servicing generally should be referred to qualified service personnel. Caution must be
exercised, since improper servicing may cause unsafe operation.
Customers in Canada should consult the yellow pages for the nearest MC Commercial service center,
visit our website at GEAppliances.ca/en/products/parts-filters-accessories or call 888.880.3030.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

GE ZV1050SFSS Le manuel du propriétaire

ZV1050SFSS
GE
Marque
GE
Modèle
ZV1050SFSS
Catégorie
Hottes
Taper
Le manuel du propriétaire
Ce manuel convient également à
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents