VP89
Modular Shotgun Microphone
Модульный линейный микрофон
Microphone canon modulaire
Modulares Richtrohrmikrofon
Micrófono de cañón modular
Microfono shotgun modulare
モジュールショットガンマイクロホン
Modular Shotgun 마이크
模块化短枪式话筒
www.shure.com
© 2014 Shure Incorporated
Printed in U.S.A.
27A22326 (Rev. 2)
WIRED MICROPHONE
VP89L
VP89M
VP89S
3
6 “ (15 cm)
70
30
50
General Description
The VP89 is a professional shotgun microphone for use in critical A/V media
production applications. Designed with interchangeable long, medium and
short capsules, the VP89 models provide scalable, superior off-axis rejection
for focus and flexibility in a wide variety of on-site locations.
Variations
The VP89 is available with long, medium, and short capsules in three model
variations: VP89L, VP89M, and VP89S.
The VP89 microphone has a tighter acceptance angle (is more directional)
when used with longer capsules, as shown in the graphic below.
Features
• Premier production microphone crafted with Shure quality, ruggedness, and
reliability
• Highly directional, uniform polar pattern optimized for distant pickup
• Modular design allows optimal performance in a wide variety of production
settings
• Designed for extremely low susceptibility to radiated and conducted hum,
GSM, and radio frequency interference (RFI)
• Superior common mode rejection
• Low self-noise and high output level
• Class A, discrete preamplifier provides transparent, extremely fast
transient response with no crossover distortion and minimal harmonic and
intermodulation distortion
• Selectable low-frequency response
• Lightweight, compact design accommodates prolonged operation,
minimizing operator fatigue attributed to many shotgun microphones
• Aircraft-grade aluminum alloy construction resists wear and abuse
• Operates over a wide range of temperatures and humidity
Changing Capsules
1. Turn off phantom power supplied to the microphone.
2. Unscrew the capsule from the preamplifier. Store the unused capsule with
its protective cap (included with the purchase of additional capsules).
3. Thread the replacement capsule to the preamp. Do not overtighten.
Note: Before each use, ensure the capsule is tightly secured to the preamp to
prevent signal loss during operation.
Wind Protection
Use the supplied windscreen to reduce wind-noise. For increased protection,
Shure offers two premium Rycote
®
wind protection accessories:
• Softie Windshield: Attenuates up to 25 dB of wind-noise
• Suspension Windshield Kit: Attenuates up to 38 dB of wind-noise while
preserving critical high frequencies; included Lyre suspension mounts
provide up to 25 dB of isolation
Suspension Mounts
Shure offers four Rycote
®
Softie Lyre Mounts to reduce handling noise and
low-frequency vibrations up to 15 dB:
• InVision Video: Secures to a standard camera shoe; for VP89S and
VP89M
• Camera Clamp Adapter (CCA): Fits into a standard camera clamp; for
VP89S, VP89M
• Pistol Grip: Adjustable handheld mount; for VP89S, VP89M
• Boom Adapter: Secures to a boom pole; for VP89L
Note: All Softie Lyre Mounts (except InVision Video) are equipped with 3/8”
and 5/8” female threaded adapters for additional mounting options.
A89U Double-Barrel Adapter
The A89U adapter routes the VP89 preamp and cable connection beneath the
capsule, shortening the length of the microphone by up to 6” (150 mm). Use
the adapter to make a highly directional microphone in a compact form-factor.
XLR Connector Gasket
This microphone is supplied with a small corrugated rubber ring in the XLR
connector to absorb the mechanical slack between the microphone and cable.
Many high-end cables are made with a rubber shoulder on the XLR-F for the
same purpose. When connecting this microphone to a cable with a rubber
shoulder XLR-F connector, remove the corrugated rubber ring from the micro-
phone to ensure a proper fit.
Load Impedance
Maximum SPL capability, output clipping level, and dynamic range vary with
the input load impedance of the preamplifier to which the microphone is con-
nected. Shure recommends a minimum input load impedance of 1000 Ohms.
Most modern microphone preamplifiers meet this requirement. Higher imped-
ance results in better performance for these specifications.
Selecting Low-Frequency Response
A two-position switch on the preamplifier adjusts the low-frequency response.
Use the low-frequency filter to reduce room noise or proximity effect.
Normal response: Provides the most natural sound in most applications.
Low-frequency rolloff: Provides a 12 dB-per-octave rolloff below the
specified frequency for each model (see product specifications). Reduces
floor rumble and low-frequency room noise from heating and air conditioning
systems.
Compatibility
The VP89 is designed for forward and backward compatibility with Shure
SM89 shotgun microphones. Capsules and preamplifiers can interchange
seamlessly between the two models.
Power Requirements
This microphone requires phantom power and performs best with a 48 V DC
supply (IEC-61938), but it can operate with supplies as low as 11 V DC. Most
modern mixers provide phantom power and require the use of a balanced mi-
crophone cable: XLR-to-XLR or XLR-to-TRS.
Note: Information in this guide is subject to change without notice. For addi-
tional information about this product, please visit www.shure.com.
Rycote Custom Accessories
Shure offers custom Rycote
®
suspension mounting and wind-protection solu-
tions designed for Shure VP shotgun microphones.
XLR-F
rubber shoulder
corrugated rubber ring
MICROPHONE
12
Specifications
Cartridge Type
Electret Condenser
Polar Pattern
Hypercardioid/Lobar
Frequency Response VP89L: VP89M: VP89S:
40 to 20,000 Hz 50 to 20,000 Hz 65 to 20,000 Hz
Output Impedance
115.0 Ω
Sensitivity
open circuit voltage, @ 1 kHz,
typical
-33.5 dBV/Pa
[1]
(21.1 mV)
Maximum SPL
1 kHz at 1% THD
[2]
2500 Ω load:
132.0 dB SPL
1000 Ω load:
128.5 dB SPL
Signal-to-Noise Ratio
[3]
79.0 dB
Dynamic Range
@ 1 kHz
2500 Ω load:
117.0 dB
1000 Ω load:
113.5 dB
Clipping Level
@ 1 kHz, 1% THD
2500 Ω load:
4.0dBV
1000 Ω load:
0.0dBV
Self Noise
equivalent SPL, A-weighted,
typical
15.0 dB
Common Mode Rejection
20 to 20,000 Hz
≥70.0 dB
Low-Frequency Filter Switch
-12 dB/oct below specified
frequency
Flat Response: 100 Hz
Low Frequency Rolloff: 200 Hz
Operating Temperature
Range
-18°C (0°F) to 57°C (135°F)
Storage Temperature Range
-29°C (-20°F) to 74°C (165°F)
Operating Relative Humidity
0 to 95%
Polarity
Positive pressure on diaphragm produces positive voltage on pin
2 with respect to pin 3
Housing
Charcoal-grey metallic painted aluminum alloy handle and grille
with stainless steel screen
Power Requirements
11–52 V DC
[4]
phantom power (IEC-61938), <2.0 mA
Net Weight VP89L: VP89M: VP89S:
174 g (6.1 oz.) 138 g (4.9 oz.) 117 g (4.1 oz.)
[1]
1 Pa=94 dB SPL
[2]
THD of microphone preamplifier when applied input signal level is equivalent to cartridge output
at specified SPL
[3]
S/N ratio is the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted
[4]
All specifications measured with a 48 Vdc phantom power supply. The microphone operates at
lower voltages, but with slightly decreased headroom and sensitivity.
Homologations
Autorisé à porter la marque CE. Conforme à la directive européenne CEM
2004/108/CE. Conforme aux normes harmonisées EN55103-1:1996 et
EN55103-2:1996 pour les environnements résidentiels (E1) et d’industrie
légère (E2).
La déclaration de conformité CE peut être obtenue auprès de : www.shure.
com/europe/compliance
Représentant agréé européen :
Shure Europe GmbH
Siège Europe, Moyen-Orient et Afrique
Service : Homologation EMA
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Allemagne
Téléphone : +49 7262 92490
Télécopie : +49 7262 9249114
Courriel : [email protected]
Caractéristiques
Type de capsule
Condensateur à électret
Courbe de directivité
Superniere/keulenförmig
Réponse en fréquence VP89L : VP89M : VP89S :
40 à 20,000 Hz 50 à 20,000 Hz 65 à 20,000 Hz
Impédance de sortie
115,0 Ω
Sensibilité
tension en circuit ouvert, à 1
kHz, typique
-33,5 dBV/Pa
[1]
(21,1 mV)
SPL maximum
1 kHz avec DHT de 1 %
[2]
Charge de 2500 Ω :
132,0 dB SPL
Charge de 1000 Ω :
128,5 dB SPL
Rapport signal/bruit
[3]
79,0 dB
Plage dynamique
à 1 kHz
Charge de 2500 Ω :
117,0 dB
Charge de 1000 Ω :
113,5 dB
Niveau d'écrêtage
à 1 kHz, DHT de 1 %
Charge de 2500 Ω :
4,0 dBV
Charge de 1000 Ω :
0,0 dBV
Bruit propre
équivalent SPL, pondéré en
A, typique
15,0 dB
Rejet en mode commun
20 à 20,000 Hz
≥70,0 dB
Commutateur de filtre
basse fréquence
-12 dB/oct en dessous de la
fréquence spécifiée
Linearer
Frequenzgang :
100 Hz
Bassabsenkungs-
Rolloff :
200 Hz
Plage de températures de
fonctionnement
-18°C (0°F) à 57°C (135°F)
Plage de températures de
stockage
-29°C (-20°F) à 74°C (165°F)
Humidité relative de
fonctionnement
0 à 95%
Polarité
Une pression acoustique positive sur le diaphragme produit une
tension positive sur la broche 2 par rapport à la broche 3.
Boîtier
Anthrazitgrau-metallic-lackierter Griff aus Aluminiumlegierung
und Grill mit Edelstahl-Abschirmung
Alimentation
11–52 V c.c.
[4]
alimentation fantôme (IEC-61938), <2,0 mA
Poids net VP89L : VP89M : VP89S :
174 g (6,1 oz) 138 g (4,9 oz) 117 g (4,1 oz)
[1]
1 Pa=94 dB SPL
[2]
La DHT du préamplificateur du microphone appliquée au niveau du signal d’entrée est équiva-
lente au niveau de sortie de la capsule pour la valeur SPL spécifiée.
[3]
Le rapport signal/bruit est la différence entre le niveau SPL de 94 dB et le niveau SPL équiva-
lent du bruit propre pondéré A.
[4]
Toutes les caractéristiques techniques ont été mesurées avec une source d'alimentation
fantôme de 48 V c.c. Le microphone fonctionne à des tensions plus basses mais au prix d'une
plage dynamique et d'une sensibilité légèrement réduites.
CERTIFICATION
Eligible to bear CE Marking. Conforms to European EMC Directive
2004/108/EC. Meets Harmonized Standards EN55103-1:1996 and
EN55103-2:1996, for residential (E1) and light industrial (E2) environments.
The Declaration of Conformity can be obtained from:
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49 7262 92490
Fax: +49 7262 9249114
Email: [email protected]
13
Certificaciones
Califica para llevar la marca CE. Cumple con la directiva europea de EMC
2004/108/EC. Satisface las normas armonizadas EN55103-1:1996 y
EN55103-2:1996 para entornos de uso residencial (E1) e industrial ligero
(E2).
La declaración de homologación de CE se puede obtener en: www.shure.
com/europe/compliance
Representante europeo autorizado:
Shure Europe GmbH
Casa matriz en Europa, Medio Oriente y Africa
Departamento: Aprobación para región de EMEA
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Alemania
Teléfono: +49 7262 92490
Fax: +49 7262 9249114
Correo electrónico: [email protected]
Especificaciones
Tipo de cápsula Condensador de electreto
Patrón polar Hipercardioide/lobular
Respuesta de frecuencia VP89L: VP89M: VP89S:
40 a 20,000 Hz 50 a 20,000 Hz 65 a 20,000 Hz
Impedancia de salida
115,0 Ω
Sensibilidad
voltaje con circuito abierto, a 1
kHz, típico
-33,5 dBV/Pa
[1]
(21,1 mV)
Nivel de presión acústica
(SPL) máx.
1 kHz con 1% THD
[2]
Carga de 2500 Ω:
132,0 dB SPL
Carga de 1000 Ω:
128,5 dB SPL
Relación de señal a ruido
[3]
79,0 dB
Rango dinámico
a 1 kHz
Carga de 2500 Ω:
117,0 dB
Carga de 1000 Ω:
113,5 dB
Nivel de limitación
a 1 kHz, 1% THD
Carga de 2500 Ω:
4,0 dBV
Carga de 1000 Ω:
0,0 dBV
Ruido autógeno
SPL equivalente, Ponderación
A, típico
15,0 dB
Rechazo en modo común
20 a 20,000 Hz
≥70,0 dB
Interruptor de respuesta de
frecuencias bajas
-12 dB/octava por debajo de la
frecuencia especificada
Respuesta plana:
100 Hz
Atenuación
progresiva de fre-
cuencias bajas:
200 Hz
Gama de temperatura de
funcionamiento
-18°C (0°F) a 57°C (135°F)
Intervalo de temperaturas de
almacenamiento
-29°C (-20°F) a 74°C (165°F)
Humedad relativa de uso 0 a 95%
Polaridad Una presión positiva en el diafragma del micrófono produce
un voltaje positivo en la clavija 2 con respecto a la clavija 3
Caja Manija de aleación de aluminio pintado en gris carbón me-
tálico y rejilla con rejilla de acero inoxidable
Requisitos de alimentación
11–52 VCC
[4]
Alimentación phantom (IEC-61938), <2,0 mA
Peso neto VP89L: VP89M: VP89S:
174 g (6,1 oz) 138 g (4,9 oz) 117 g (4,1 oz)
[1]
1 Pa=94 dB SPL
[2]
THD del preamplificador del micrófono cuando el nivel de la señal de entrada que se aplica es
equivalente a la señal de salida de la cápsula para el SPL que se especifica
[3]
La relación de señal a ruido es la diferencia entre 94 dB SPL y el SPL equivalente del ruido
inherente con ponderación A
[4]
Todas las especificaciones medidas con fuente de alimentación phantom de 48 VCC. El micró-
fono funciona a voltajes más bajos, pero con niveles de limitación y de sensibilidad reducidos.
17
137 mm (5.41 in.)137 mm (5.41 in.)
239 mm (9.41 in.)239 mm (9.41 in.)
386 mm (15.21 in.)386 mm (15.21 in.)
21 mm
(0.815 in.)
21 mm
(0.815 in.)
21 mm
(0.815 in.)
21 mm
(0.815 in.)
21 mm
(0.815 in.)
21 mm
(0.815 in.)
102 mm
(4.02 in.)
22 mm
(0.88 in.)
VP89L
VP89M
VP89S
VP89L
500 Hz
250 Hz
1,000 Hz
6,300 Hz
10,000 Hz
2,500 Hz
20
15
10
5
0
-30
-25
-20
-15
-10
-5
dB
Hz
20 100 1k 10k 20k
1,8 m (6 ft.) from sound source
VP89M
500 Hz
250 Hz
1,000 Hz
6,300 Hz
10,000 Hz
2,500 Hz
20
15
10
5
0
-30
-25
-20
-15
-10
-5
dB
Hz
20 100 1k 10k 20k
1,8 m (6 ft.) from sound source
VP89S
20
15
10
5
0
-30
-25
-20
-15
-10
-5
dB
Hz
20 100 1k 10k 20k
1,8 m (6 ft.) from sound source
18
5.41 in (137 mm)5.41 in (137 mm)
9.41 in (239 mm)9.41 in (239 mm)
15.21 in (386 mm)15.21 in (386 mm)
A89LC
VP89L
A89MC
VP89M
A89SC VP89S
A89LW
VP89L
A89MW
VP89M
A89SW VP89S
RPM89L
RPM89/PRE
RPM89M
RPM89S
A89U
Furnished Accessories
Accessoires fournis
Mitgeliefertes Zubehör
Accesorios suministrados
Accessori in dotazione
Аксессуары, входящие
в комплект
付属のアクセサリー
기본 제공 부속품
提供的附件
Optional Accessories
Accessoires en option
Sonderzubehör
Accesorios opcionales
Accessori opzionali
Отдельно заказываемые
аксессуары
オプションのアクセサリー
액세서리 선택 사양 可选配附件
Capsule
Capsule
Préamplificateur
Vorverstärker
Preamplificador
Preamplificatore
Предусилитель
プリアンプ
프리앰프
前置放大器
Preamplifier
Kapsel
Cápsula
Capsula
Капсула
カプセル
캡슐
极头
Foam Windscreen
Bonnette anti-vent en mousse
Schaumstoff-Windschutz
Paravientos de espuma
Antivento in schiuma poliuretanica
Пенопластовый ветрозащитный экран
フォームウィンドスクリーン
폼 윈드스크린
海绵防尘罩
Protective Case
Boîtier protecteur
Schutzetui
Estuche protector
Custodia
Защитный футляр
保護ケース
보호 케이스
保护盒
Double-Barrel Adapter
Adaptateur double corps
Doppelläufiger Adapter
Adaptador de dos tubos
Adattatore “doppia canna”
Двухгильзовый адаптер
ダブルバレルアダプター
더블-배럴 어댑터
双筒转接器
5/8” to 3/8” Thread Adapter
31A1856
Adaptateur de filetage 5/8” à 3/8”
5/8 Zoll zu 3/8 Zoll Gewindeadapter
Adaptador roscado de 5/8 a 3/8 pulg
Adattatore con filettatura da 5/8 a 3/8 di pollice
Резьбовой переходник 5/8 на 3/8 дюйма
5/8”－ 3/8”ネジアダプター
5/8” 에서 3/8” 스레드 어댑터
5/8 英寸至 3/8 英寸螺纹转接器
Microphone Clip
A57F
Pince de microphone
Mikrofonklemme
Pinza para micrófono
Clip per microfono
Зажим для микрофона
マイククリップ
마이크 클립
话筒夹
3/7/11
19
A89LW-KIT
A89SW-KIT
A89MW-KIT
VP89L
VP89M
VP89S
A89LW-SFT
A89SW-SFT
A89MW-SFT
VP89L
VP89M
VP89S
Optional Accessories
Accessoires en option
Sonderzubehör
Accesorios opcionales
Accessori opzionali
Отдельно заказываемые
аксессуары
オプションのアクセサリー
액세서리 선택 사양 可选配附件
Windshield Kit
Kit de bonnette de protection
Windschutzsatz
Juego de paravientos
Kit antivento
Комплект ветрозащитного подвеса
ウィンドシールドキット
윈드쉴드 키트
防风套件
Softie Windshield
Bonnette de protection Softie
Softie-Windschutz
Paravientos Softie
Antivento Softie
Ветрозащитный экран Softie
ソフティウィンドシールド
柔性防风罩
Softie Windshield:
1
2
3
20
A89M-PG
A89M-SH
Softie Lyre Mount with InVision Video (Shoe) for VP89M and VP89S
Monture Softie Lyre avec InVision Video (griffe) pour VP89M et VP89S
Softie Lyre-Erschütterungsabsorber mit InVision Video (Schuh) für VP89M und VP89S
Montaje Softie Lyre con InVision Video (zapata) para VP89M y VP89S
Supporto a lira Softie con InVision Video (slitta) per VP89M e VP89S
Опора Softie Lyre Mount с InVision Video (башмак) для VP89M и VP89S
VP89MおよびVP89S用InVisionビデオ（シュー）使用ソフティリラマウント
VP89M 및 VP89S 용 InVision Video (Shoe)를 사용하는 Softie Lyre Mount
适用于 VP89M 和 VP89S 的带 InVision Video 热靴 Softie Lyre 固定件
Softie Lyre Mount with Pistol Grip for VP89M and VP89S
Monture Softie Lyre avec poignée-pistolet pour VP89M et VP89S
Softie Lyre-Erschütterungsabsorber mit Pistolengriff für VP89M und VP89S
Montaje Softie Lyre con empuñadura tipo pistola para VP89M y VP89S
Supporto a lira Softie con impugnatura a pistola per VP89M e VP89S
Опора Softie Lyre Mount с пистолетной рукояткой для VP89M и VP89S
VP89MおよびVP89S用ピストルグリップ使用ソフティリラマウント
VP89M 및 VP89S 용 피스톨 그립을 사용하는 Softie Lyre Mount
适用于 VP89M 和 VP89S 的手枪式握把的 Softie Lyre 固定件
Optional Accessories
Accessoires en option
Sonderzubehör
Accesorios opcionales
Accessori opzionali
Отдельно заказываемые
аксессуары
オプションのアクセサリー
액세서리 선택 사양 可选配附件
1 2
3/7/11
21
A89LM-BA
A89M-CC
Softie Lyre Mount with Camera Clamp Adapter for VP89M and VP89S
Monture Softie Lyre avec adaptateur de pince pour caméra pour VP89M et VP89S
Softie Lyre-Erschütterungsabsorber mit Kameraklemmadapter für VP89M und VP89S
Montaje Softie Lyre con adaptador para pinza de cámara para VP89M y VP89S
Supporto a lira Softie con adattatore del morsetto per videocamera per VP89M e VP89S
Опора Softie Lyre Mount с адаптером CCA для VP89M и VP89S
VP89MおよびVP89S用カメラクランプアダプタ使用ソフティリラマウント
VP89M 및 VP89S 용 카메라 클램프 어댑터를 사용하는 Softie Lyre Mount
适用于 VP89M 和 VP89S 的相机夹具转接器 Softie Lyre 固定件
Softie Lyre Mount with Boom Adapter for VP89L
Monture Softie Lyre avec adaptateur de perche pour VP89L
Softie Lyre-Erschütterungsabsorber mit Galgenadapter für VP89L
Montaje Softie Lyre con adaptador para pedestal tipo jirafa para VP89L
Supporto a lira Softie con adattatore del braccio per VP89L
Опора VP89L Softie Lyre с адаптером для журавля
VP89L用ブームアダプター使用ソフティリラマウント
VP89L용 붐 어댑터를 사용하는 Softie Lyre Mount
带有适用于 VP89L 的悬架转接器的 Softie Lyre 固定件
Optional Accessories
Accessoires en option
Sonderzubehör
Accesorios opcionales
Accessori opzionali
Отдельно заказываемые
аксессуары
オプションのアクセサリー
액세서리 선택 사양 可选配附件
1 2
Notes
Notes
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
dans d''autres langues
- English: Shure VP89 User guide
- español: Shure VP89 Guía del usuario