English
5
Viewing the Control panel
N The product colour and shape may vary depending on the model.
m R
P
Function menu
TV Controller
Remote control sensor
Left
Down (Front)
Up (Rear)
Right
Power on Turn the TV on by pressing the Controller when the TV is in standby mode.
Adjusting the volume Adjusts the volume by moving the controller from side to side when the power is on.
Selecting a channel Select a channel by moving the Controller backwards and forwards when the power is on.
Using the function menu To view and use the Function menu, press and release the Controller when the power is on. To close
the Function menu, press and release the Controller again.
Selecting the MENU
m
With the Function menu visible, select the MENU
m
by moving the Controller to the left. The OSD
(On Screen Display) Menu appears. Select an option by moving the Controller to the right. Move the
Controller to the right or left, or backwards and forwards to make additional selections. To change a
parameter, select it, and then press the Controller.
Selecting the MEDIA.P With the Function menu visible, select MEDIA.P by moving the Controller backwards. The MEDIA.P
main screen appears. Select an application by moving the Controller, and then pressing the Controller.
Selecting the Source
s
With the Function menu visible, open the Source
s
by pushing the Controller to the right. The Source
screen appears. To select a source, move the Controller back and forth. When the source you want is
highlighted, press the Controller.
Power off (
P
) With the Function menu visible, select Power off (
P
) by pulling the Controller forwards, and then press
the Controller.
N To close the Menu, MEDIA.P or Source, press the Controller for more than 1 second.
N When selecting the function by moving the controller to the forwards/backwards/left/right directions, be sure not to press the
controller. If you press it first, you cannot operate it to move the forwards/backwards/left/right directions.
Setup
The initial setup dialog appears when the TV is first activated.
Follow the on-screen instructions to finish the initial setup process, including menu language choice, country choice,
channel source choice, channel scan, and more.
At each step, either make a choice or skip the step.
Users can manually perform this process at a later time under the System > Setup menu.
[TC350-Asia-QSG]BN68-04796L-01L07.indb 5 2013-04-23 �� 6:30:29