Samsung LE32B550M2H Guide d'installation

Samsung
Marque
Samsung
Modèle
LE32B550M2H
Catégorie
Téléviseurs LCD
Taper
Guide d'installation

Ce manuel convient également à

LCD TV
installation manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model Serial No.
BN68-02157K-x0-Eng.indd 1 2009-04-16 ¿ÀÈÄ 5:03:08
Instruction
This TV is provided with interactive functionality through a set-back box (SBB/STB) connected
to the TV, and with other TVs in a computer controlled system for hotels and other hospitality
businesses.
Interactive : When the TV is powered-up initially, it sends a command to identify the SBB/STB;
if identied, theTV switches to ONLINE mode and full control is through the SBB/STB.
If the TV is in ONLINE mode, it stops receiving IR(Samsung remote) commands and acts
according to interface protocol.
Stand-Alone: If SBB/STB is not identied, the TV should be switched to STAND-ALONE mode with
restricted operation.
Operational Modes
When this TV (in Hotel mode) is operated with a SBB/STB, it is in one of two states
ONLINE or STAND-ALONE. In the STAND-ALONE state, the TV will act as a Hotel TV, but
without active communication. This is to prevent guests from trying to cheat the system by
disconnecting the SBB/STB.
To set the details for Stand-alone or interactive mode, refer to pages 16-19(Setting the hotel option
data : Stand-alone mode and Interactive mode)
Some operations may be restricted to prevents guests from "cheating" the TV system.
No main menu(Interactive mode) or Channel Menu, Plug & Play in Main Menu (Stand-Alone mode)
Limited Volume and Panel key lock or unlock
-
-
-
-
Hotel Mode On
Hotel Mode Off
Power
ON
Hotel TV
SBB/STB Online-
if one success
within 10 attempts
SBB/STB Online-
10 consecutive
fails
SBB/STB Status-
Attempt every
2secs
Normal TV
Stand-alone
Mode
Online Mode
Poll Rate 20/sec
BN68-02157K-x0-Eng.indd 2 2009-04-16 ¿ÀÈÄ 5:03:08
Digital TV Notice
1. Functionalities related to Digital TV(DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC)
digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C(MPEG2 and MPEG4
AAC) cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.
2.
DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and
DVB-C is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG
(Electric Program Guide), VOD (Video on Demand) and so on, are not included in this specication. So, they cannot be
workable at this moment.
3.
Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future
DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed.
4.
Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for
such a service and you may be required to agree to terms and conditions of their business.
5.
Some Digital TV functions might be unavailable in some countries or regions and DVBC might not work correctly with
some cable service providers.
6.
For more information, please contact your local Samsung customer care centre.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen
●
Do not display a still image and partially still on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and
contrast of the screen when displaying a still image.
●
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right
and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console
may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.
●
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2009 Samsung Electronics Co., Ltd. All rights reserved.
BN68-02157K-x0-Eng.indd 3 2009-04-16 ¿ÀÈÄ 5:03:09
English - 1
Symbol Press Note One-Touch
Button
Contents
List of Parts ............................................................................................................................................2
Installing the Stand ................................................................................................................................2
Installing the Wall Mount Kit ...................................................................................................................2
Viewing the Control Panel......................................................................................................................3
Viewing the Connection Panel ...............................................................................................................4
Viewing the Remote Control ..................................................................................................................7
Using the Anti-Theft Kensington Lock ....................................................................................................8
Connecting the TV with STB (SBB) .......................................................................................................9
Connecting the Bathroom Speakers ....................................................................................................11
Connecting the MediaHub HD .............................................................................................................13
Connecting the RJP(Remote Jack Pack) ............................................................................................14
Setting the Hotel Option Data ..............................................................................................................16
Specications .......................................................................................................................................26
License
TruSurround HD, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround HD
technology is incorporated under license from SRS Labs, Inc.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
BN68-02157K-x0-Eng.indd 1 2009-04-16 ¿ÀÈÄ 5:03:10
English - 2
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control &
Batteries (AAA x 2)
Power Cord Cover-Bottom Data Cable
Stand &
Stand Screw x 4
Cleaning Cloth
Owner’s Instructions
•
Safety Guide
•
Warranty card
•
Registration Cards
•
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
The stand and stand screw may not be included depending on the model.
The Data Cable may not be included depending on the SI Vendor.
➣
➣
➣
M4 X L16
Installing the Stand
1. Attach your LCD TV to the stand.
Two or more people should carry the TV.
Make sure to distinguish between the front and back of the stand when attaching it.
To make sure the TV is installed on the stand at a proper level, do not apply excess downward
pressure to the upper left of right sides of the TV.
2.
Fasten two screws at position 1 and then fasten two screws at position 2.
Stand the product up and fasten the screws. If you fasten the screws with the LCD
TV placed
down, it may lean to one side.
➣
➣
➣
➣
2
1
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the
TV on a wall. For detailed information on installing the wall
mount, see the instructions provided with the Wall Mount
items. Contact a technician for assistance when installing
the wall mounted bracket. Samsung Electronics is not
responsible for any damage to the product or injury to
yourself or others if you elect to install the TV on your own.
Do not install your Wall Mount Kit while your TV is
turned on. It may result in personal injury due to
electric shock.
Remove the stand and cover the bottom hole with the
cover.
➣
BN68-02157K-x0-Eng.indd 2 2009-04-16 ¿ÀÈÄ 5:03:12
English - 3
Viewing the Control Panel
1
Speakers
5
+
=
-
Press to decrease or increase the volume.
In the on-screen menu, use the +
=
-
buttons as you use the ◄ and ► buttons on
the remote control.
6
CH
Press to change channels.
In the on-screen menu, use the
CH
buttons as you use the
▼
and
▲
buttons on
the remote control.
7
Power Indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
8
(Power)
Press to turn the TV on and off.
2
Remote Control Sensor
Aim the remote control towards this spot on
the TV.
3
SOURCE
Toggles between all the available input sources
(TV, AV, Component, PC, HDMI1, HDMI2).
In the on-screen menu, use this button as you
would use ENTER button on the remote control.
4
MENU
Press to see an on-screen menu of your TV’s
features.
3
4
5
6
7
8
2
1
3 4 5 62
1
7 8
The product color and shape may vary depending on the model.
➣
BN68-02157K-x0-Eng.indd 3 2009-04-16 ¿ÀÈÄ 5:03:14
English - 4
Viewing the Connection Panel
Whenever you connect an external device to your TV, make sure that power on the unit is turned off
When connecting an external device, match the color of the connection terminal to the cable.
1 AUDIO OUT
Connects to the audio input jacks on an Amplier/Home Theater.
2
HDMI(DVI) IN 1 / AUDIO / PC / HDMI IN 2
Connect to the video and audio output jack on your PC.
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players).
No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
"High Denition Multimedia interface" allows the transmission of high denition digital video data
and multiple channels of digital audio.
The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable
(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size,
has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi
- channel digital audio.
➣
➣
-
-
-
-
➣
-
-
The product color and shape may vary depending on the model.
➣
HDMI IN2
IN 1
6
1
$
Power Input
[TV Side Panel]
[TV Rear Panel]
2 3
@ 0#
5
!
7
9 8
2
%
4
LE32B550M2H/LE37B550M2H/LE40B550M2H/LE46B550M2H
BN68-02157K-x0-Eng.indd 4 2009-04-16 ¿ÀÈÄ 5:03:15
English - 5
Display Modes
Bot
h screen position and size will vary depending on the type of PC monitor and its resolution.
The re
solutions in the table are recommended.
D-Sub and HDMI/DVI Input
Mode Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-
-/+
MAC
640 x 480
832 x 624
1152 x 870
35.000
49.726
68.681
66.667
74.551
75.062
30.240
57.284
100.000
-/-
-/-
-/-
VESA CVT
720 x 576
1152 x 864
1280 x 720
1280 x 960
1280 x 720
35.910
53.783
44.772
75.231
56.456
59.950
59.959
59.855
74.857
74.777
32.750
81.750
74.500
130.000
95.750
-/+
-/+
-/+
-/+
-/+
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
49.702
62.795
60.000
47.712
55.935
70.635
65.290
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
59.810
74.934
60.000
60.015
59.887
74.984
59.954
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
83.500
106.500
108.000
85.500
106.500
136.750
146.250
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
-/+
-/+
-/+
VESA GTF
1280 x 720
1280 x 1024
52.500
74.620
70.000
70.000
89.040
128.943
-/+
-/-
VESA DMT /
DTV CEA
1920 x 1080p 67.500 60.000 148.500 +/+
When using an HDMI / DVI cable connection, you must use the HDMI (DVI) IN 1 jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
Too long or low quality VGA cable can cause picture noise at high resolution modes (1920x1080
or 1600x1200).
3
ANT IN
T
o view television channels correctly, a signal must be received by the set from one of the following
sources:
An outdoor antenna / A cable television network / A satellite network
4 DC Power Output - 5V DC/2.5A (12V DC/1.5A)
Used to supply power for the SBB or STB.
5 VOL-CTRL
Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOL-
CTRL port.
6 VIDEO / R-AUDIO-L
Connect a VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out
jacks on the A/V device.
➣
➣
➣
➣
➣
➣
-
-
-
-
-
-
BN68-02157K-x0-Eng.indd 5 2009-04-16 ¿ÀÈÄ 5:03:15
English - 6
7 Kensington Lock
The Kensington lock (optional) is a device used to physically x the system when used in a public
place.
If you want to use a locking device, contact the dealer where you purchased the TV.
The location of the Kensington Lock may be different depending on its model
8 RJP
This port is an RJP (Remote Jack Pack) communication port that enables connecting different
devices to additional module so as to improve device use convenience.
9
HP-ID
Enables to identify whether a headphone jack is inserted into the additionally created head phone
box.
0 DATA
Used to support data communication between the TV and the SBB.
The TV jack type is RJ-12.
! VARIABLE AUDIO OUT
Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the
Variable port (RCA).
@ CLONING/SERVICE
USB Cloning (refer to page 22)
Service connector
Hotel Logo download
# COMPONENT IN
Connect component video cables (optional) to the component jacks ("P
R", "PB", "Y") on the rear of
your TV and the other ends to corresponding component video out jacks on the DVD.
If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the
DVD and connect the DVD to the component jacks ("P
R", "PB", "Y") on your TV.
The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y
or Y, Cb and Cr.
Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of the TV set and the other
ends to corresponding audio out jacks on the DVD.
$
EXT
Connector
Input Output
Video Audio (L/R) RGB Video + Audio (L/R)
EXT
O O O
Only TV or DTV output is available.
-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
% Headphones jack
Headphones may be connected to the headphone jack on your TV. While the headphones are
connected, the sound from the built-in speakers will be disabled.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
BN68-02157K-x0-Eng.indd 6 2009-04-16 ¿ÀÈÄ 5:03:15
English - 7
Viewing the Remote Control
1 POWER
Turns the TV on and off.
2 NUMERIC BUTTONS
Press to change the
channel.
3 ALARM
Enter
the hour you want the
TV to turn on.
4
(MUTE)
Press to temporarily cut off
the sound.
5 + =
-
Press to increase or
decrease the volume.
6 CH LIST
Used to display Channel
Lists on the screen.
7
TOOLS
Use to quickly select
frequently used functions.
Picture Mode / Sound Mode /
Sleep Timer / Energy Saving
8
INFO
Press to display information
on the TV screen.
9 COLOR BUTTONS
Use these buttons in the
Channel list, etc.
! DUAL
Sound effect selection.
@
Use these buttons in the
DMA and Anynet+ modes.
(
: This remote can be
used to control recording on
Samsung recorders with the
Anynet
+
feature.)
# TV
Selects the TV mode
directly.
$ PRE-CH
Tunes to the previous
channel.
%
< P >
Press to change channels.
^
SOURCE
Press to display and select
the available video sources.
& FAV.CH
Press to switch to your
favorite channels.
* MENU
Displays the main on-screen
menu.
( RETURN
Returns to the previous
menu.
)
UP▲ / DOWN▼ / LEFT◄
/
RIGHT►
/ ENTER
Use to select on-screen
menu items and change
menu values.
a
EXIT
Press
to exit the menu.
b
P.SIZE
Picture size selection.
c
SRS
Selects SRS TruSurround
HD mode.
d
SUBT.
Digital subtitle display.
e
GUIDE
Electronic Programme
Guide (EPG) display.
Teletext Functions
6 Teletext store
7 Teletext size selection
8 Teletext reveal
9 Fastext topic selection
0 Alternately select Teletext,
Double, or Mix.
# Exit from the teletext display
$ Teletext sub page
% P>: Teletext next page
P<: Teletext previous page
^ Teletext mode selection
(LIST/FLOF)
* Teletext index
( Teletext hold
a Teletext cancel
The performance of the remote control may be affected by bright light.
➣
BN68-02157K-x0-Eng.indd 7 2009-04-16 ¿ÀÈÄ 5:03:17
English - 8
Using the Anti-Theft Kensington Lock
The Kensington lock is a device used to physically x the system when using it in a public
place. The appearance and locking method may differ from the illustration depending on the
manufacturer. Refer to the manual provided with the Kensington lock for proper use. The locking
device has to be purchased separately.
1. Insert the locking device into the Kensington slot
on the LCD TV (Figure 1), and turn it in the locking
direction (Figure 2).
2. Connect the Kensington lock cable.
3
. Fix the Kensington lock to a desk or a heavy
stationary object.
The location of the Kensington Lock may be
different depending on its model.
➣
Cable
Figure 2
Figure 1
<Optional>
BN68-02157K-x0-Eng.indd 8 2009-04-16 ¿ÀÈÄ 5:03:18
English - 9
Connecting the TV with STB (SBB)
1. Connect the [DATA] jack of the TV to the [ETH MODEM] jack of the STB(SBB) with the Data cable.
Use data communication.
2. Connect the [Class 2 Wiring-5V DC/2.5A
(12V DC/1.5A)] jack of the TV to the [DC-POWER] jack of
the STB (SBB) with the DC cable.
The supported jack type differs depending on the STB (SBB) model.
TV Jack Type: 6.5 Ø DC Power Jack
Some STB (SBB) devices are not compatible with the data cable supplied with the TV.
➣
➣
➣
➣
Data Cable
Dc Cable
2
1
TV Rear Panel
Hotel Server
STB(Set Top Box)
or SBB(Set Back Box)
BN68-02157K-x0-Eng.indd 9 2009-04-16 ¿ÀÈÄ 5:03:19
English - 10
Warning
When you use the DC power output jack, you have to check the standard output power of
STB(SBB) and you should use the DC power within the standard output(Class 2 Wiring-5V
DC/2.5A (12V DC/1.5A).
For 5V SBB, SBB load current must not exceed 2.5A.
For 12V SBB, SBB load current must not exceed 1.5A.
The initial output is 5V.
For 12V SBB, you have to change the output voltage to 12V in order to use the power.
Changing the Output Voltage
1. Press the POWER button.
The TV is powered on.
2. Press the following remote control
buttons in order.
The Hotel Option menu appears.
3
. Press the ▲ or ▼ button to select
"DC Power Output".
Press the ◄ or ►button to select
"12V" or "5V".
4
. Remove the power cord then plug it
back in again.
The voltage change is applied when you turn the TV on again after changing the
Interactive mode Option setting.
-
-
-
-
➣
➣
➣
Hotel Mode
On
Sub AMP Volume
13
Energy Saving
Off
SI Vendor
Samsung
Sub AMP Mode
2
DC Power Output
5 Voits
Power On Channel
1
Logo Time
Manual
Clone : TV to USB
Power On Source
ATV
Time Format
12 Hour
Clone : USB to TV
Power On Volume
10
PMOLED Test
Off
Welcome Message
Min Volume
0
PMOLED Mormal Dimming
3
Max Volume
100
PMOLED StandBy Dimming
2
Panel Button Lock
Off
Audio Loop In
Off
Music Mode (AV)
Off
Clone Hotal Menu
Interactive
Music Mode (PC)
Off
Menu Display
On
Music Mode (Comp)
Off
Hotel Logo
Off
Music Mode Backlight
Off
Hotel Logo DL
RJP Prlorlty(AV)
1
Logo Display Time
5 sec
RJP Prlorlty(PC)
2
Powe r On Option
Lsst Option
RJP Prlorlty(HDML)
3
Auto PC
Off
BN68-02157K-x0-Eng.indd 10 2009-04-16 ¿ÀÈÄ 5:03:19
English - 11
Connecting the Bathroom Speakers
You can connect the Bathroom Speakers in the following method.
Connecting through the Variable Output (available without an external amplifier)
1. Connect the V
ARIABLE AUDIO port of the TV to the Bathroom Wall Speakers of the hotel.
2. Connect the [VOL-CTRL] jack of the TV to the Volume Control Box Switch port of the Bathroom Wall
of the hotel.
The maximum speaker output is 4W, 8Ω.
Installing the Volume Control
If you congure the Volume Control Box as shown in the gure, you can control the volume of
bathroom speakers.
The jack that is connected from the Volume Control Box to the TV is a 3.5mm normal Phone jack.
Volume Control Box switch consists of Tact switch.
Setting the Sub AMP Mode
0: Turns the Sub AMP function off (PWM off).
1:
Determines the Sub volume according to the main volume control. That is, the sub volume is
determined according to the Power On Volume, the Min Volume, and the Max Volume values of
the Hotel Mode.
2: Determines the volume according to the bathroom control panel setting.
➣
♦
-
-
-
➣
-
-
-
VOL +
VOL
-
-
+
1
TV Rear Panel
2
Speaker
Volume Control Box
Shield wire : Speaker -
Signal wire : Speaker +
BN68-02157K-x0-Eng.indd 11 2009-04-16 ¿ÀÈÄ 5:03:20
English - 12
Variable Output Port Specications
Speaker Wire: Use speaker cable no more than 82 feet (25m) in length.
Connect through the Fixed Output (available without an external amplifier)
1. Connect the
AUDIO OUT port of the TV and the Audio In port of the audio amplier with a stereo
cable.
♦
-
VOL +
VOL
-
1
2
3
Volume Control Box
VOL - DOWN
( White 1 )
VOL - UP
( Black /Red 2 )
GND
( Shield Wire 3 )
-
+
AUDIO IN
TV Rear Panel
Audio Amplier
Stereo cable
1
BN68-02157K-x0-Eng.indd 12 2009-04-16 ¿ÀÈÄ 5:03:20
English - 13
Connecting the MediaHub HD
Output of any external source connected to MediaHub HD on hotel desk.
1. Connect the RJP
port of the TV and the RS/232 port of the MediaHub HD.
2. Connect the [HDMI] port of the
TV and the HDMI port of the MediaHub HD.
MediaHub HD
The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC,
HDMI and USB) and corresponding outputs. The corresponding output sources are connected from
MediaHub to TV. The MediaHub communicates with the TV via RS232. Hot Plug & Play is a function
that allows hotel guests to connect an external source to the MediaHub. The MediaHub communicates
with the TV by sending messages regarding Active/Inactive sources. The TV will switch to the Active
external source.
You have to connect the HDMI of the MediaHub to the HDMI 1 port of the TV.
When the TV is on, connect the TV and the RJP within 10 seconds.
Special features
PIP
Bluetooth
Media Player(MediaHub HD+ only)
Auto Detection
♦
♦
-
-
-
-
TV Rear Panel
HDMI cable
2
MediaHub HD Rear
RS-232 Data Cable
1
BN68-02157K-x0-Eng.indd 13 2009-04-16 ¿ÀÈÄ 5:03:21
English - 14
Connecting the RJP(Remote Jack Pack)
Output of any external source connected to RJP on hotel desk.
1. Connect the RJP
port of the TV and the RS/232 port of the RJP.
2. Connect the PC IN [PC] / [AUDIO] port of the
TV to the PC/AUDIO port of the RJP.
3. Connect the AV IN [VIDEO]/[R-AUDIO-L] port of the TV to the RCA port of the RJP.
4. Connect the [HDMI] port of the TV and the HDMI port of the RJP.
5. Connect the
AV IN[VIDEO] port of the TV to the S-Video port of the RJP.
The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD)
and TA-7660 (HD Plus).
RJP (Remote Jack Pack)
RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio Video
inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources
are connected from RJP to TV. The RJP communicates with the TV via RS232. Hot Plug & Play is a
function that allows hotel guests to connect an external source to the RJP.
The RJP communicates
with the TV by sending messages regarding Active/Inactive sources.
The TV will switch to the Active external source according to the priority set by the User.
You have to connect the HDMI of the RJP to the HDMI 1 port of the TV.
When the TV is on, connect the TV and the RJP within 10 seconds.
The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons
simultaneously for 10 seconds. All LEDs blink 5 times to Acknowledge that the rest has been
performed.
The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light
pollution in the hotel room. The LEDs that were turned off will turn on again if the guest touches
any of the buttons and the 5 minute timer will restart. If the guest then touches another source
button, the TV will change to the selected source and the corresponding LED will be lit.
After an RJP Reset or a TV Power OFF/ON, it takes approx. 10 seconds to establish
communications between the TV and the RJP.
The following table shows the approximate time in seconds to switch from the TV to the input
source, based on the priority.
➣
♦
➣
➣
♦
♦
♦
♦
HDMI IN2
H
DMI IN
2
TV Rear Panel
TV Side Panel
Video / Audio Cable
3
HDMI cable
4
RJP Rear
D-sub / PC Audio cable
2
RS-232 Data Cable
1
Video Cable
5
BN68-02157K-x0-Eng.indd 14 2009-04-16 ¿ÀÈÄ 5:03:22
English - 15
Scenario 1: When no inputs are connected.
Source To Connect
AV 2 Sec
PC 0.7 Sec
HDMI 3.9 Sec
Scenario 2: When two or more inputs are connected and an Input source is disconnected and
then reconnected.
Source Disconnect To Connect Total
AV 4.5 Sec 2 Sec 6.5 Sec
PC 0.7 sec 0.7 Sec 1.4 Sec
HDMI 3.9 Sec 3.9 Sec 7.8 Sec
E.g. If the RJP has all its live sources AV, PC and HDMI connected, AV is viewed as the highest
priority. If the RJP is in HDMI mode, and a guest removes and reconnects the AV, the minimum
time required to switch to the AV is 6.5 seconds.
To connect audio (Ipod or Mp3), Music mode should be ON and Jack Ident detect should be OFF.
A/V, PC and HDMI input sources are supported.
Audio Loop In
An additionally created Headphone Box can be installed on a bed or business desk so that users can use
it conveniently. The installation procedures are given below. (Not available for 19/22 inch model.)
Detailed Drawing of the Headphone Box
➣
➣
➣
♦
♦
♦
IN 1
Headphone
TV Rear Panel
Headphone Box
Shield wire
Red Wire
(Audio-R)
Shield wire
TV HP-ID jack
Red Wire + White wire
Whitewire
(Audio-L)
TV
Headphones jack
BN68-02157K-x0-Eng.indd 15 2009-04-16 ¿ÀÈÄ 5:03:23
English - 16
Setting the Hotel Option Data
Stand-alone mode
To Enter:
Press the buttons in order.
To Exit from this menu : power off and turn on again.
No Item Initial Value Description
1 Hotel Mode On Hotel mode(Stand alone) on/off
2 SI Vendor Off Select the SI Vendor
3
Power On
Channel
1 TV will switch on to this particular Channel
4
Power on
source
ATV Select the Input source when TV is turned on initially.
5
Power On
Volume
10 TV will switch on with this Volume Level
6 Min Volume 0 Minimum Volume Level setting user can set
7 Max Volume 100 Maximum Volume Level setting user can set
8
Panel Button
Lock
Off
Front panel(Local key) operation on/off
- Off : Unlock All panel key
- On : Lock All panel key
- Power : Lock All panel key except Power panel key
9 Pic Menu Lock Off Enable or disable Picture Menu
10 Video Mute Ch 1 (Off)
To select Channels not displaying(doing video mute) for example(Radio
channel), If 1 is ON, channel 1 display only black picture.
11
Video Mute Ch
On/Off
Off
To select Channels not displaying(doing video mute) for example(Radio
channel), If 1 is ON, channel 1 display only black picture.
12 Music Mode(AV) Off
To get music output from mp3/audio player in AV Input Source.
Audio enabled, video disabled in this mode
13
Music
Mode(PC)
Off
To get music output from mp3/audio player in PC Input Source.
Audio enabled, video disabled in this mode
14
Music
Mode(Comp)
Off
To get music output from mp3/audio player in Component Input Source.
Audio enabled, video disabled in this mode
15
Music Mode
Backlight
Off Backlight On/Off option in Music mode to save energy
16 RJP Priority(AV) 1
If the jack priority is set, the corresponding source is automatically set
when a jack is inserted according to the jack priority.
17 RJP Priority(PC) 2
If the jack priority is set, the corresponding source is automatically set
when a jack is inserted according to the jack priority.
18
RJP
Priority(HDMI)
3
If the jack priority is set, the corresponding source is automatically set
when a jack is inserted according to the jack priority.
19
RJP HDMI
Option
HDMI1 Select RJP HDMI Source (HDMI1/HDMI2)
20
Sub AMP
volume
13 Sub AMP Volume level at power on initial condition.
BN68-02157K-x0-Eng.indd 16 2009-04-16 ¿ÀÈÄ 5:03:23
English - 17
21 Sub AMP mode 2
Determines the Sub AMP operation mode.
- 0: Turns the Sub AMP function off (PWM off).
- 1:
Determines the Sub volume according to the main volume
control. That is, the sub volume is determined according to the
Power On Volume, the Min Volume, and the Max
- 2:
Determines the volume according to the bathroom control panel
setting.
22 Local time Manual
Selection of the way to update clock data
- Manual:
Use clock data from DVB channel or manual clock setting
when the TV is in the stand-alone mode
- TTX: manual clock setting (with updating from TTX data)
23 Time Format 12hour
Select time expression method(12H/24H)
Reset AC power after setting this option
24 PMOLED Test Off This function is not available on this model.
25
PMOLED
Normal
Dimming
3 This function is not available on this model.
26
PMOLED
StandBy
Dimming
2 This function is not available on this model.
27 Audio Loop In Off Audio loop identication or H.P identication selection
28
Clone Hotel
Menu
Standalone
The interactive or stand alone Hotel TV options in the OSD when
pressing the Hotel key on the clone remote control. (Stand Alone/
Interactive)
29 Menu display Off
- On : Main Menu display
- Off : Main Menu No display
30 Hotel Logo Off Select Hotel Logo
31 Hotel Logo DL Download Hotel Logo from USB to TV
32
Logo Display
Time
5 sec
Selection of the logo display time
- 3 sec: Hotel logo is displayed for 3sec.
- 5 sec: Hotel logo is displayed for 5sec.
- 7 sec: Hotel logo is displayed for 7sec.
33 Power On Opt Last Option
Power On(AC Power On) Option
- STN-BY : Stand-By Mode
- Power On : Power On
- LAST OPT : Last Power State
34 Auto PC Off
While TV is in power on state, if PC source is connected to TV,
TV will automatically switch to PC mode.
35 Energy Saving Off
This feature adjusts the brightness of the TV in order to reduce power
consumption.
- Off: Turns off the energy saving function.
- Low: Sets the TV to low energy saving mode.
- Medium: Sets the TV to medium energy saving mode.
- High: Sets the TV to high
36
Clone :
TV to USB
- USB Clone : TV → USB
37
Clone :
USB to TV
- USB Clone : USB → TV
38
Pan Euro
MHEG
Off
39
Welcome
message
Off Display Welcome Message
40
Edit Welcome
message
Edit Welcome Message
BN68-02157K-x0-Eng.indd 17 2009-04-16 ¿ÀÈÄ 5:03:23
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Samsung LE32B550M2H Guide d'installation

Samsung
Marque
Samsung
Modèle
LE32B550M2H
Catégorie
Téléviseurs LCD
Taper
Guide d'installation
Ce manuel convient également à
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents