Samsung LE19A650A1 Manuel utilisateur

Country

Customer Care Centre

Web Site

AUSTRIA 0800-SAMSUNG (726-7864) www.samsung.com/at

BELGIUM 0032 (0)2 201 24 18 www.samsung.com/be

CZECH REPUBLIC

844 000 844 www.samsung.com/cz

Distributor pro Českou republiku:

Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4

DENMARK 70 70 19 70 www.samsung.com/dk

EIRE 0818 717 100 www.samsung.com/ie

FINLAND 030-6227 515 www.samsung.com/

FRANCE

3260 SAMSUNG (€ 0,15/Min)

08 25 08 65 65 (€ 0,15/Min)

www.samsung.com

GERMANY 01805 - SAMSUNG (726-7864) (€ 0,14/Min) www.samsung.com

HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com

ITALIA 800-SAMSUNG (726-7864) www.samsung.com

LUXEMBURG 0035 (0)2 261 03 710 www.samsung.com/be

NETHERLANDS 0900-SAMSUNG (726-7864) (€ 0,10/Min) www.samsung.com/nl

NORWAY 815-56 480 www.samsung.com/no

POLAND

0 801 801 881

022-607-93-33

www.samsung.com/pl

PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com/pt

SLOVAKIA 0800-SAMSUNG (726-7864) www.samsung.com/sk

SPAIN 902 10 11 30 www.samsung.com

SWEDEN 0771-400 200 www.samsung.com/se

SWITZERLAND 0800-SAMSUNG (726-7864) www.samsung.com/ch

U.K 0845 SAMSUNG (7267864) www.samsung.com

TURKEY 444 77 11 www.samsung.com

ESTONIA 800-7267 www.samsung.ee

LATVIA 800-7267 www.samsung.com/lv

LITHUANIA 8-800-77777 www.samsung.lt

KAZAHSTAN 8-10-800-500-55-500 www.samsung.kz

KYRGYZSTAN 00-800-500-55-500 -

RUSSIA 8-800-555-55-55 www.samsung.ru

TADJIKISTAN 8-10-800-500-55-500 -

UKRAINE 8-800-502-0000 www.samsung.com

UZBEKISTAN 8-10-800-500-55-500 www.samsung.uz

LCD TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/global/register

Model Serial No.

BN68-01593G-00

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products,

please contact the SAMSUNG customer care centre.

BN68-01593G-00-Cover.indd 1 2008-05-09 ¿ÀÈÄ 3:51:45

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen

image retention.

This image retention is also known as "screen burn".

To avoid such image retention, reduce the degree of brightness and contrast of the screen when

displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of

borders displayed on the left, right and center of the screen caused by the difference

of light emission on the screen. Playing a DVD or a game console may cause a similar

effect to the screen. Damages caused by the above effect are not covered by the Warranty.

• Displaying still images from Video games and PC for longer than a certain period of time may

produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG

customer care centre.(See back cover for more information)

BN68-01593A-Eng.indd 2 2008-05-09 ¿ÀÈÄ 3:52:36

Contents

CONNECTING AND PREPARING YOUR TV

List of Parts ........................................................ 2

Viewing the Control Panel .................................. 3

Viewing the Connection Panel ........................... 4

Viewing the Remote Control ............................... 6

Installing Batteries in the Remote Control .......... 7

Switching On and Off ......................................... 7

Placing Your Television in Standby Mode........... 7

Viewing the Menus ............................................. 8

Using the TOOLS Button .................................... 8

Plug & Play ......................................................... 9

SETTING THE CHANNELS

Storing Channels Automatically ....................... 10

Storing Channels Manually ...............................11

Adding / Locking Channels .............................. 12

Sorting the Stored Channels ............................ 13

Assigning Channels Names ............................. 13

Fine Tuning Channel Reception ....................... 14

SETTING THE PICTURE

Changing the Picture Standard ........................ 15

Adjusting the Custom Picture ........................... 16

Resetting the Picture Settings to the

Factory Defaults ............................................... 17

Changing the Picture Options .......................... 18

Viewing the Picture In Picture (PIP) ................. 20

SETTING THE SOUND

Sound Features ................................................ 21

Selecting the Sound Mode ............................... 22

Connecting Headphones (Sold separately) ..... 22

SETTING THE TIME

Setting and Displaying the Current Time .......... 23

Setting the Sleep Timer .................................... 23

Switching the Television On and Off

Automatically .................................................... 24



FUNCTION DESCRIPTION

Choosing Your Language ................................. 24

Melody / Energy Saving .................................. 25

Selecting the Source ........................................ 26

Editing the Input Source Names ...................... 27

SETTING THE PC

Setting up Your PC Software

(Based on Windows XP) .................................. 28

Display Modes .................................................. 28

Setting up the TV with your PC ........................ 29

RECOMMENDATIONS FOR USE

Teletext Feature ............................................... 30

Using the Anti-Theft KENSINGTON LOCK

(depending on the model) ................................ 31

Securing the TV to the Wall .............................. 32

How to Adjust the Stand (19 inch model only) . 33

How to Adjust the Angle of the TV

(19 inch model only) ......................................... 33

Installing the Wall Mount Kit

(19 inch model only) ......................................... 33

Installing VESA compliant mounting devices

(19 inch model only) ......................................... 33

Using the Decoration Covers

(19 inch model only) ......................................... 34

Installing the Stand ........................................... 34

Installing the Wall Mount Kit ............................. 34

Troubleshooting:

Before Contacting Service Personnel .............. 35

Technical and Environmental Specications ... 36



English - 1

English

Symbol Press Note One-Touch

Button

BN68-01593A-Eng.indd 1 2008-05-09 ¿ÀÈÄ 3:52:37

English - 2

List of Parts

Please make sure the following items are included with your LCD TV.

If any items are missing, contact your dealer.

M4XL16

Remote Control &

Batteries (AAA x 2)

Power Cord Cover-Bottom Stand Screw X 4

Wall Mount kit Decoration Cover

Stand

Cleaning Cloth

♦ Owner’s Instructions

♦ Warranty card

♦ Safety Guide

♦ Registration Cards

Warranty card / Safety Guide /

Registration Cards (Not available in all locations)

The stand, stand screw, Cover-Bottom, Wall Mount kit, and Decoration Cover may not be included

depending on the model.

➣

BN68-01593A-Eng.indd 2 2008-05-09 ¿ÀÈÄ 3:52:37

English - 3

Viewing the Control Panel

1 SOURCE

Toggles between all the available input

sources (TV, Ext., AV, Component, PC, HDMI).

In the on-screen menu, use this button as

you use the ENTER

button on the remote

control.

2 MENU

Press to see an on-screen menu of your TV’s

features.

3

Press to decrease or increase the volume.

In the on-screen menu, use the

buttons as you use the

◄

and

►

buttons on

the remote control.

4

Press to change channels. In the on-screen

menu, use the buttons as you use

the

▲

and

▼

buttons on the remote control.

(Without the Remote Control, you can turn on

the TV by using the Channel buttons.)

5 Power Indicator

Blinks and turns off when the power is on and

lights up in stand-by mode.

6 (Power)

Press to turn the TV on and off.

7 Remote Control Sensor

Aim the remote control towards this spot on

the TV.

8 Speakers

The product colour and shape may vary depending on the model.

8 87

4

1

2

3

5

6

Front Panel buttons

Touch each button to

operate.

BN68-01593A-Eng.indd 3 2008-05-09 ¿ÀÈÄ 3:52:38

English - 4

Viewing the Connection Panel

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

When connecting an external device, match the colour of the connection terminal to the cable.

➣

The product colour and shape may vary depending on the model.

➣

2 43 5

67

1

89

Power Input

1 EXT

Connector

Input Output

Video Audio (L/R) RGB Video + Audio (L/R)

EXT

O O O

Only TV output is available.

-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

2 DVI IN [HDMI/DVI IN]

Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)

No additional Audio connection is needed for an HDMI to HDMI connection.

What is HDMI?

“High Denition Multimedia interface” allows the transmission of high denition digital video data and

multiple channels of digital audio.

The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable

(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size,

has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi

- channel digital audio.

DVI IN [R-AUDIO-L]

DVI audio outputs for external devices.

Supported modes for HDMI/DVI and Component

480i 480p 576i 576p 720p 1080i

HDMI/DVI 50Hz

X X X O O O

HDMI/DVI 60Hz

X O X X O O

Component O O O O O O

-

➣

-

➣

BN68-01593A-Eng.indd 4 2008-05-09 ¿ÀÈÄ 3:52:38

English - 5

3 SERVICE

Connector for SERVICE only.

4 PC IN [PC] / [AUDIO]

Connect to the video and audio output jack on your PC.

5 ANT IN

To view television channels correctly, a signal must be received by the set from one of the following

sources:

An outdoor aerial / A cable television network / A satellite network

6 Headphones jack

Headphone may be connected to the headphone output on your set. While the head phone is

connected, the sound from the built-in speakers will be disabled.

7 AV IN [VIDEO]/[R-AUDIO-L]

Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio

out connectors on the A/V device.

8 COMPONENT IN

Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of

your set and the other ends to corresponding component video out connectors on the DVD.

If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD

and connect the DVD to component connector ("PR", "PB", "Y") on your set.

The PR, PB and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and

R-Y or Y, Cb and Cr.

Connect RCA audio cables (optional) to [R - AUDIO - L] on the rear of your set and the other ends

to corresponding audio out connectors on the DVD.

9 KENSINGTON LOCK (depending on the model)

The Kensington lock (optional) is a device used to physically x the system when used in a public place.

If you want to use a locking device, contact the dealer where you purchased the TV.

The location of the kensington lock may be different depending on its model.

-

BN68-01593A-Eng.indd 5 2008-05-09 ¿ÀÈÄ 3:52:38

English - 6

TOOLS

1 Television Standby button

2 Selects the TV mode directly

3 Number buttons for direct

channel access

4

One/Two-digit channel selection

5

+

: Volume increase

: Volume decrease

6 Temporary sound switch-off

7 Use to quickly select

frequently used functions.

8 Use to see information on

the current broadcast

9 Colour buttons :

Use these buttons in the

Channel list, etc.

! Displays the Channel List on

screen

@ Available source selection

# Previous channel

$ P : Next channel

P : Previous channel

% Returns to the previous

menu

^ Control the cursor in the menu

& Exit the on-screen menu

* Picture size selection

( Displays the main on-screen

menu

) Selects the HDMI mode

directly.

a Picture effect selection

Teletext Functions

2 Exit from the teletext display

7 Teletext size selection

8 Teletext reveal

9 Fastext topic selection

0 Alternately select Teletext,

Double, or Mix.

! Teletext store

@ Teletext mode selection

(LIST/FLOF)

# Teletext sub page

$ P : Teletext next page

P : Teletext previous page

% Teletext hold

& Teletext cancel

( Teletext index

The performance of the remote control may be affected by

bright light.

➣

Viewing the Remote Control

BN68-01593A-Eng.indd 6 2008-05-09 ¿ÀÈÄ 3:52:38

English - 7

1. Lift the cover at the back of the remote control upward as shown in the

figure.

2. Install two AAA size batteries.

Make sure to match the "+" and "–" ends of the batteries with the

diagram inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t

be using the remote control for a long time.

➣

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special uorescent light or neon sign nearby?

➣

Installing Batteries in the Remote Control

Switching On and Off

The mains lead is attached to the rear of your set.

1. Plug the mains lead into an appropriate socket.

The standby indicator lights up on your set.

2. Press the button on your set.

You also can press the POWER button or the TV button on the remote control to turn the TV

on.

The channel that you were watching last is reselected automatically.

3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or

button on your set.

When you switch the set on for the very rst time, you will be asked to choose language in which the

menus are to be displayed.

4. To switch your set off, press the POWER button again.

➣

Your set can be placed in standby mode in order to reduce the power consumption. The standby

mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1. Press the POWER button on the remote control.

The screen is turned off and a red standby indicator appears on your set.

2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV button or

channel up/down ( / ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday,

for example).

It is best to unplug the set from the mains and aerial.

➣

Placing Your Television in Standby Mode

BN68-01593A-Eng.indd 7 2008-05-09 ¿ÀÈÄ 3:52:39

English - 8

You can use the TOOLS button to select your frequently

used functions quickly and easily. The “Tools” menu change

depending on which external input mode you are viewing.

1. Press the TOOLS button.

The “Tools” menu will appear.

2. Press the ▲ or ▼ button to select a menu.

3. Press the ▲/▼/◄/►/ENTER

buttons to display, change, or

use the selected items. For a more detailed description of each

function, refer to the corresponding page.

• Picture Mode, see page 15

• Sound Mode, see page 21

• Sleep Timer, see page 23

• SRS TS XT, see page 21

• Energy Saving, see page 25

• Dual l-ll, see page 22

• PIP, see page 20

• Auto Adjustment, see page 29

TOOLS

1. With the power on, press the MENU button.

The main menu appears on the screen. The menu’ s left side

has icons: Picture, Sound, Channel, Setup, Input.

2. Press the ▲ or ▼ button to select one of the icons.

Then press the ENTER

button to access the icon’s sub-

menu.

3. Press the EXIT button to exit.

The on-screen menus disappear from the screen after about

one minute.

Viewing the Menus

Using the TOOLS Button

Picture

Mode : Standard 

Backlight 7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G 50 R 50

Picture Options 

Reset : OK 

TV

Move Enter Return

TOOLS

Picture Mode ◄ Standard ►

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

Dual l-ll : Mono

Tools

Move Adjust Exit

BN68-01593A-Eng.indd 8 2008-05-09 ¿ÀÈÄ 3:52:39

English - 9

When the TV is initially powered on, several basic settings

proceed automatically and subsequently. The following

settings are available.

1. Press the POWER button on the remote control.

The message "Start Plug & Play." is displayed with "OK"

selected.

2. Select the appropriate language by pressing the

▲

or

▼

button.

Press the ENTER

button to confirm your choice.

3. Press the

◄

or

►

button to select “Store Demo” or “Home Use”, then the ENTER

button.

We recommend setting the TV to "Home Use" mode for the best picture in your home

environment.

"Store Demo" mode is only intended for use in retail environments.

If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”

(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and

hold the MENU button on the TV for 5 seconds

4. The message "Check antenna input." is displayed with "OK" selected.

Press the ENTER

button.

Please check that the antenna cable is connected correctly.

5. Select the appropriate country by pressing the

▲

or

▼

button.

Press the ENTER

button to confirm your choice.

6.

The "Auto Store" menu is displayed with the "Start" selected. Press the

ENTER

button.

The channel search will start and end automatically.

After all the available channels are stored, the "Clock Set" menu appears.

Press the ENTER

button at any time to interrupt the memorization process.

7. Press the ENTER

button.

Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the

◄

or

►

button.

Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the

▲

or

▼

button.

You can also set the “Month”, “Day”, “Year”, “Hour” and "Minute" by pressing the number buttons

on the remote control.

8. Press the ENTER

button to confirm your setting. The message “Enjoy your viewing” is displayed.

When you have finished, press the ENTER

button.

Even if the ENTER

button is not pressed, the message will automatically disappear after

several seconds.



Language

: Select your language.



Country

: Select your country.



Auto Store

: Automatically scans for and stores channels available in the local area.



Clock Set

: Sets the current time for the TV clock.

Plug & Play

Start Plug & Play.

Enter

OK

BN68-01593A-Eng.indd 9 2008-05-09 ¿ÀÈÄ 3:52:40

English - 10

If you want to reset this feature...

1. Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Setup" then press the

ENTER button.

2. Press the ENTER

button again, to select "Plug & Play".

For further details on setting up options, refer to the page 9.

The “Plug & Play” feature is only available in the TV mode.

➣

You can scan for the frequency ranges available to you (and

availability depends on your country). Automatically allocated

programme numbers may not correspond to actual or desired

programme numbers. However, you can sort numbers manually

and clear any channels you do not wish to watch.

1. Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Channel", then press the

ENTER

button.

2. Press the ENTER

button to select "Country".

3. Select the appropriate country by pressing the

▲

or

▼

button.

Press the ENTER

button to confirm your choice.

4. Press the

▲

or

▼

button to select "Auto Store", then press the ENTER

button.

5. Press the ENTER

button.

The TV will begin memorizing all of the available channels.

Press the ENTER

button at any time to interrupt the memorization process and return to the

"Channel" menu.

6. After all the available channels are stored, the "Sort" menu appears. (refer to page 13)

➣

Storing Channels Automatically

TV

Setup

Plug & Play 

Language : English 

Time 

Melody : Off 

Energy Saving : Off 

PIP 

Move Enter Return

TV

Channel

Country : United Kingdom 

Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

Move Enter Return

BN68-01593A-Eng.indd 10 2008-05-09 ¿ÀÈÄ 3:52:40

English - 11

Storing Channels Manually

You can store television channels, including those received

via cable networks.

When storing channels manually, you can choose:

♦ Whether or not to store each of the channels found.

♦ The programme number of each stored channel which you wish

to identify.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER

button.

2. Press the ▲ or ▼ button to select "Manual Store", then press

the ENTER

button.

3. Select the required option by pressing the ▲ or ▼ button,

then press the ENTER

button.

4. When you are satisfied with your setting, press the

ENTER

button.

5.

Press the EXIT button to exit.

♦ Programme (Programme number to be assigned to a channel)

− Press the ▲ or ▼ button until you find the correct number.

You can also select the channel number directly by pressing the numeric buttons (0~9).

♦ Colour System: Auto/PAL/SECAM/NTSC4.43

− Press the ▲ or ▼ button to select the required colour standard.

♦ Sound System: BG/DK/I/L

− Press the ▲ or ▼ button to select the required sound standard.

♦ Channel (When you know the number of the channel to be stored)

− Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).

− Press the ► button, then press the ▲ or ▼ button to select the required number.

You can also select the channel number directly by pressing the numeric buttons (0~9).

If there is abnormal sound or no sound, re-select the sound standard required.

♦ Search (When you do not know the channel numbers)

− Press the ▲ or ▼ button to start the search.

− The tuner scans the frequency range until the first channel or the channel that you selected is

received on the screen.

♦ Store (When you store the channel and associated programme number)

− Set to "OK" by pressing the ENTER

button.

Channel mode

− P (Programme mode): When completing tuning, the broadcasting stations in your area have been

assigned to position numbers from P00 to P99. You can select a channel by entering the position

number in this mode.

− C (Air channel mode): You can select a channel by entering the assigned number to each air

broadcasting station in this mode.

− S (Cable channel mode): You can select a channel by entering the assigned number for each

cable channel in this mode.

Channel

Country : United Kingdom 

Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

Move Enter Return

TV

Manual Store

Programme : P 1

Colour System : Auto 

Sound System : BG 

Channel : S 6

Search : 140 MHz

Store : ?

Move Enter Return

TV

BN68-01593A-Eng.indd 11 2008-05-09 ¿ÀÈÄ 3:52:41

English - 12

Using the Channel Manager, you can conveniently lock or add

channels.

1. Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Channel", then press the

ENTER

button.

2. Press the

▲

or

▼

button to select "Channel Manager",

then press the ENTER

button.

♦ Adding channels

Using the Channel List, you can add channels.

3. Select "Channel List" by pressing the ENTER

button.

4. Move to the ( ) field by pressing the ▲, ▼, ◄ or ►

button, select a channel to be added, and press the

ENTER

button to add the channel.

If you press the ENTER

button again, the ( ) symbol

next to the channel disappears and the channel is not

added.

" " is active when "Child Lock" is selected to "On".

♦ Locking channels

This feature allows you to prevent unauthorized users, such

as children, from watching unsuitable programmes by muting

out video and audio.

5. Press the

▲

or

▼

button to select "Child Lock", then press

the ENTER

button.

6. Select "On" by pressing the ▲ or ▼ button, then press the

ENTER

button.

7. Press the

▲

or

▼

button to select "Channel List",

then press the ENTER

button.

8. Move to the " " field by pressing the ▲, ▼, ◄ or ► button,

select a channel to be locked, and press the ENTER

button.

If you press the ENTER

button again, the ( ) symbol

next to the channel disappears and the channel lock is

cancelled.

A blue screen is displayed when "Child Lock" is activated.

9. Press the EXIT button to exit.

Select "On" or "Off" in "Child Lock" to easily turn the

channels which selected on " " to be active or inactive.

You can select these options by simply pressing the CH LIST

button on the remote control.

➣

Adding / Locking Channels

P 1 C3

Channel List

Move Enter

Page Return

Add Lock

1 / 10

Prog.

0 C--

1 C3

2 BBC 1

3 C74

4 C75

5 C76

6 S3

7 S4

8 S6

9 S7

TOOLS

Channel

Country : United Kingdom 

Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

Move Enter Return

TV

Channel Manager

Channel List 

Child Lock : Off 

Move Enter Return

BN68-01593A-Eng.indd 12 2008-05-09 ¿ÀÈÄ 3:52:42

English - 13

This operation allows you to change the programme numbers

of the stored channels.

This operation may be necessary after using the auto store.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER

button.

2. Press the

▲

or

▼

button to select "Sort", then press the

ENTER

button.

3. Select the channel number that you wish to change by

pressing the ▲ or ▼ button.

Press the

ENTER

button.

The selected channel number and name are moved to

right side.

4. Select the number of the programme to which the channel is to

be moved by pressing the ▲ or ▼ button.

5. Press the

ENTER

button. The channel is moved to its new

position and all other channels are shifted accordingly.

6. Repeat steps 3 to 5 for another channel to be sorted.

7. Press the EXIT button to exit.

➣

Sorting the Stored Channels

Assigning Channels Names

Channel names will be assigned automatically when channel

information is broadcast. These names can be changed,

allowing you to assign new names.

1. Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Channel", then press the

ENTER

button.

2. Press the

▲

or

▼

button to select "Name", then press the

ENTER

button.

3. If necessary, select the channel to be assigned to a new

name by pressing the

▲

or

▼

button. Press the ENTER

button.

The selection bar is displayed around the name box.

4.

The following characters are available: Letters of the alphabet (A~Z) /

Numbers (0~9) / Special characters (+, -, *, /, space)

5. Repeat steps 3 to 4 for each channel to be assigned to a new name.

6. Press the EXIT button to exit.

➣

To...

Select a letter, number or symbol

Move on the next letter

Move back the previous letter

Confirm the name

Then...

Press the ▲ or ▼ button

Press the ► button

Press the ◄ button

Press the ENTER

button

Channel

Country : United Kingdom 

Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

TV

Move Enter Return

Sort

Prog. Ch. Name



0 C-- -----

1 C23 ----- 

2 S06 -----

3 S07 -----

4 S09 -----

5 S12 -----

6 S13 -----

7 S14 -----

8 S17 -----

9 C21 -----



TV

Move Enter Return

Channel

Country : United Kingdom 

Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

Move Enter Return

TV

Name

Move Enter Return

Prog. Ch. Name



0 C-- -----

1 C23 -----

2 S06 -----

3 S07 -----

4 S09 -----

5 S12 -----

6 S13 -----

7 S14 -----

8 S17 -----

9 C21 -----



TV

BN68-01593A-Eng.indd 13 2008-05-09 ¿ÀÈÄ 3:52:43

English - 14

Use fine tuning to manually adjust a particular channel for

optimal reception.

1. Use the number buttons to directly select the channel that

you want to fine tune.

2. Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Channel", then press the

ENTER

button.

3. Press the

▲

or

▼

button to select "Fine Tune", then press

the ENTER

button.

4. Press the

◄

or

►

button to adjust the fine tuning.

Press the ENTER

button.

5. Press the EXIT button to exit.

Fine tuned channels that have been saved are marked

with an asterisk "

*

" on the right-hand side of the channel

number in the channel banner. And the channel number

turns red.

To reset the ne-tuning, select "Reset" by pressing the

▲

or

▼

button and then press the ENTER

button.

➣

Fine Tuning Channel Reception

Channel

Country : United Kingdom 

Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

TV

Move Enter Return

Fine Tune

P 1

0

Reset

Adjust Save Return

BN68-01593A-Eng.indd 14 2008-05-09 ¿ÀÈÄ 3:52:43

English - 15

You can select the type of picture which best corresponds to

your viewing requirements.

1. Press the MENU button to display the menu.

Press the ENTER

button, to select "Picture".

2. Press the ENTER

button again, to select "Mode".

3. Press the

▲

or

▼

button to select the desired picture effect.

Press the ENTER

button.

4. Press the EXIT button to exit.

♦ Dynamic: Selects the picture for high-definition in a bright

room.

♦ Standard: Selects the picture for optimum display in a

normal environment.

♦ Movie: Selects the picture for comfortable display in a

dark room.

The Picture mode must be adjusted separately for each

input source.

Changing the Picture Standard

Picture

Mode : Standard 

Backlight 7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G 50 R 50

Picture Options 

Reset : OK 

TV

Move Enter Return

Picture

Mode : Standard

Backlight 7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G 50 R 50

Picture Options

Reset : OK

TV

Move Enter Return

Dynamic

Standard

Movie

Easy Setting

1. Press the TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select "Picture Mode".

3. Press the ◄ or ► button to select the required option.

4. Press the EXIT or TOOLS button to exit.

Picture Mode ◄ Standard ►

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

Dual l-ll : Mono

Tools

Move Adjust Exit

O You can also press the P.MODE button on the remote control to

select one of the picture settings.

TOOLS

BN68-01593A-Eng.indd 15 2008-05-09 ¿ÀÈÄ 3:52:44

English - 16

Your set has several settings which allow you to control

picture quality.

1. To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3.

(On page 15)

2. Press the

▲

or

▼

button to select a particular item. Press the

ENTER

button.

3. Press the

◄

or

►

button to decrease or increase the value of

a particular item. Press the ENTER

button.

4. Press the EXIT button to exit.

♦ Backlight: Adjusts the screen brightness by adjusting the

LCD backlight brightness. (0~10)

♦ Contrast: Adjusts the lightness and darkness between

objects and the background.

♦ Brightness: Adjusts the brightness of the whole screen.

♦ Sharpness: Adjusts the outline of objects to either

sharpen them or make them more dull.

♦ Colour: Adjusts the colours, making them lighter or

darker.

♦ Tint:

Adjusts the colour of objects, making them more red or

green for a more natural look.

The adjusted values are stored according to the selected Picture mode.

In PC mode, you can only make changes to "Backlight", "Contrast" and "Brightness".

In TV, Ext., AV modes of the PAL system, you cannot use the "Tint" Function.

You can return to the factory defaults picture settings by selecting the "Reset".

(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 17)

The energy consumed during use can be significantly reduced if the level of brightness of the picture

is reduced, and that this will reduce the overall running cost.

Adjusting the Custom Picture

Picture

Mode : Standard 

Backlight 7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G 50 R 50

Picture Options 

Reset : OK 

TV

Move Enter Return

7

▲

Backlight

▼

Move Adjust Return

BN68-01593A-Eng.indd 16 2008-05-09 ¿ÀÈÄ 3:52:44

English - 17

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.

1. To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3

on page 15.

2. Press the

▲

or

▼

button to select "Reset", then press the

ENTER

button.

3. Press the

▲

or

▼

button to select "OK" or "Cancel".

Press the ENTER

button.

4. Press the EXIT button to exit.

The "Reset" will be set for each Picture mode.

Picture

Mode : Standard

Backlight 7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G 50 R 50

Picture Options

Reset : OK

TV

Move Enter Return

OK

Cancel

BN68-01593A-Eng.indd 17 2008-05-09 ¿ÀÈÄ 3:52:44

English - 18

1. Press the MENU button to display the menu.

Press the ENTER

button, to select "Picture".

2. Press the ▲ or ▼ button to select “Picture Options”, then

press the ENTER

button.

3. Select the required option by pressing the ▲ or ▼ button,

then press the ENTER

button.

4. When you are satisfied with your setting, press the

ENTER

button.

5. Press the EXIT button to exit.

In PC mode, you can only make changes to the

“Colour Tone” and “Size” from among the items in “Picture

Options”.

♦ Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2

You can select the most comfortable colour tone to your eyes.

The adjusted values are stored according to the selected

Picture mode.

“Warm1” or “Warm2” is only activated when the picture mode is "Movie".

♦ Size: Auto Wide/Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan

You can select the picture size which best corresponds to your viewing requirements.

♦ Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.

♦ Wide: Adjusts the picture size to 16:10 appropriate for DVDs or wide broadcasting.

♦ 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.

♦ Wide Zoom: Magnify the size of the picture more than 4:3.

♦ Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.

♦ 4:3: This is the default setting for a video movie or normal broadcasting.

♦ Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i)

or Component (1080i) signals are input.

"Auto Wide" function is available only in "TV", "Ext." and "AV" mode.

In PC Mode, only "Wide" and "4:3" mode can be adjusted.

Settings can be adjusted and stored for each external device you have connected to an input of

the TV.

Temporary image retention may occur when viewing a static image on the set for more than two

hours.

Wide Zoom: Move the screen up/down using the ▲ or ▼ button after selecting the by

pressing the ► or ENTER

button.

Zoom: Select by pressing the ◄ or ►button.

Use the ▲ or ▼button to move the picture up and down. After selecting ,

use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.

After selecting “Just Scan” in HDMI (1080i) or Component (1080i) mode:

Select by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.

Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER button.

You can initialize the setting.

O You can select these options by simply pressing the P.SIZE

button on the remote control.

➣

Changing the Picture Options

TOOLS

Picture Options

Colour Tone : Normal 

Size : Auto Wide 

Screen Mode : Wide 

Digital NR : Auto 

HDMI Black Level

: Normal 

Move Enter Return

TV

Picture

Mode : Standard 

Backlight 7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G 50 R 50

Picture Options 

Reset : OK 

TV

Move Enter Return

BN68-01593A-Eng.indd 18 2008-05-09 ¿ÀÈÄ 3:52:45

La page charge ...

Samsung LE19A650A1 Manuel utilisateur

Ce manuel convient également à

Samsung LE19A650A1 Manuel utilisateur

dans d''autres langues

Documents connexes