Samsung LE19A650A1 Manuel utilisateur

Catégorie
Téléviseurs LCD
Taper
Manuel utilisateur

Ce manuel convient également à

Country
Customer Care Centre
Web Site
AUSTRIA 0800-SAMSUNG (726-7864) www.samsung.com/at
BELGIUM 0032 (0)2 201 24 18 www.samsung.com/be
CZECH REPUBLIC
844 000 844 www.samsung.com/cz
Distributor pro Českou republiku:
Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4
DENMARK 70 70 19 70 www.samsung.com/dk
EIRE 0818 717 100 www.samsung.com/ie
FINLAND 030-6227 515 www.samsung.com/
FRANCE
3260 SAMSUNG (€ 0,15/Min)
08 25 08 65 65 (€ 0,15/Min)
www.samsung.com
GERMANY 01805 - SAMSUNG (726-7864) (€ 0,14/Min) www.samsung.com
HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com
ITALIA 800-SAMSUNG (726-7864) www.samsung.com
LUXEMBURG 0035 (0)2 261 03 710 www.samsung.com/be
NETHERLANDS 0900-SAMSUNG (726-7864) (€ 0,10/Min) www.samsung.com/nl
NORWAY 815-56 480 www.samsung.com/no
POLAND
0 801 801 881
022-607-93-33
www.samsung.com/pl
PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com/pt
SLOVAKIA 0800-SAMSUNG (726-7864) www.samsung.com/sk
SPAIN 902 10 11 30 www.samsung.com
SWEDEN 0771-400 200 www.samsung.com/se
SWITZERLAND 0800-SAMSUNG (726-7864) www.samsung.com/ch
U.K 0845 SAMSUNG (7267864) www.samsung.com
TURKEY 444 77 11 www.samsung.com
ESTONIA 800-7267 www.samsung.ee
LATVIA 800-7267 www.samsung.com/lv
LITHUANIA 8-800-77777 www.samsung.lt
KAZAHSTAN 8-10-800-500-55-500 www.samsung.kz
KYRGYZSTAN 00-800-500-55-500 -
RUSSIA 8-800-555-55-55 www.samsung.ru
TADJIKISTAN 8-10-800-500-55-500 -
UKRAINE 8-800-502-0000 www.samsung.com
UZBEKISTAN 8-10-800-500-55-500 www.samsung.uz
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
Model Serial No.
BN68-01593A-00
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
BN68-01593A-00-Cover.indd 1 2008-05-07 ¿ÀÀü 11:36:25
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen
image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when
displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of
borders displayed on the left, right and center of the screen caused by the difference
of light emission on the screen. Playing a DVD or a game console may cause a similar
effect to the screen. Damages caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may
produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre.(See back cover for more information)
BN68-01593A-Eng.indd 2 2008-05-07 ¿ÀÀü 11:27:08
Contents
CONNECTING AND PREPARING YOUR TV
List of Parts ........................................................ 2
Viewing the Control Panel .................................. 3
Viewing the Connection Panel ........................... 4
Viewing the Remote Control ............................... 6
Installing Batteries in the Remote Control .......... 7
Switching On and Off ......................................... 7
Placing Your Television in Standby Mode........... 7
Viewing the Menus ............................................. 8
Using the TOOLS Button .................................... 8
Plug & Play ......................................................... 9
SETTING THE CHANNELS
Storing Channels Automatically ....................... 10
Storing Channels Manually ...............................11
Adding / Locking Channels .............................. 12
Sorting the Stored Channels ............................ 13
Assigning Channels Names ............................. 13
Fine Tuning Channel Reception ....................... 14
SETTING THE PICTURE
Changing the Picture Standard ........................ 15
Adjusting the Custom Picture ........................... 16
Resetting the Picture Settings to the
Factory Defaults ............................................... 17
Changing the Picture Options .......................... 18
Viewing the Picture In Picture (PIP) ................. 20
SETTING THE SOUND
Sound Features ................................................ 21
Selecting the Sound Mode ............................... 22
Connecting Headphones (Sold separately) ..... 22
SETTING THE TIME
Setting and Displaying the Current Time .......... 23
Setting the Sleep Timer .................................... 23
Switching the Television On and Off
Automatically .................................................... 24
FUNCTION DESCRIPTION
Choosing Your Language ................................. 24
Melody / Energy Saving .................................. 25
Selecting the Source ........................................ 26
Editing the Input Source Names ...................... 27
SETTING THE PC
Setting up Your PC Software
(Based on Windows XP) .................................. 28
Display Modes .................................................. 28
Setting up the TV with your PC ........................ 29
RECOMMENDATIONS FOR USE
Teletext Feature ............................................... 30
Using the Anti-Theft KENSINGTON LOCK
(depending on the model) ................................ 31
Securing the TV to the Wall .............................. 32
How to Adjust the Stand (19 inch model only) . 33
How to Adjust the Angle of the TV
(19 inch model only) ......................................... 33
Installing the Wall Mount Kit
(19 inch model only) ......................................... 33
Installing VESA compliant mounting devices
(19 inch model only) ......................................... 33
Using the Decoration Covers
(19 inch model only) ......................................... 34
Installing the Stand ........................................... 34
Installing the Wall Mount Kit ............................. 34
Troubleshooting:
Before Contacting Service Personnel .............. 35
Technical and Environmental Specications ... 36
English - 1
English
Symbol Press Note One-Touch
Button
BN68-01593A-Eng.indd 1 2008-05-07 ¿ÀÀü 11:27:08
English - 2
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
M4XL16
Remote Control &
Batteries (AAA x 2)
Power Cord Cover-Bottom Stand Screw X 4
Wall Mount kit Decoration Cover
Stand
Cleaning Cloth
Owner’s Instructions
Warranty card
Safety Guide
Registration Cards
Warranty card / Safety Guide /
Registration Cards (Not available in all locations)
The stand, stand screw, Cover-Bottom, Wall Mount kit, and Decoration Cover may not be included
depending on the model.
BN68-01593A-Eng.indd 2 2008-05-07 ¿ÀÀü 11:27:09
English - 3
Viewing the Control Panel
1 SOURCE
Toggles between all the available input
sources (TV, Ext., AV, Component, PC, HDMI).
In the on-screen menu, use this button as
you use the ENTER
button on the remote
control.
2 MENU
Press to see an on-screen menu of your TV’s
features.
3
Press to decrease or increase the volume.
In the on-screen menu, use the
buttons as you use the
and
buttons on
the remote control.
4
Press to change channels. In the on-screen
menu, use the buttons as you use
the
and
buttons on the remote control.
(Without the Remote Control, you can turn on
the TV by using the Channel buttons.)
5 Power Indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
6 (Power)
Press to turn the TV on and off.
7 Remote Control Sensor
Aim the remote control towards this spot on
the TV.
8 Speakers
The product colour and shape may vary depending on the model.
8 87
4
1
2
3
5
6
Front Panel buttons
Touch each button to
operate.
BN68-01593A-Eng.indd 3 2008-05-07 ¿ÀÀü 11:27:09
English - 4
Viewing the Connection Panel
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
The product colour and shape may vary depending on the model.
2 43 5
67
1
89
Power Input
1 EXT
Connector
Input Output
Video Audio (L/R) RGB Video + Audio (L/R)
EXT
O O O
Only TV output is available.
-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
2
DVI IN [HDMI/DVI IN]
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
“High Denition Multimedia interface” allows the transmission of high denition digital video data and
multiple channels of digital audio.
The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable
(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size,
has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi
- channel digital audio.
DVI IN [R-AUDIO-L]
DVI audio outputs for external devices.
Supported modes for HDMI/DVI and Component
480i 480p 576i 576p 720p 1080i
HDMI/DVI 50Hz
X X X O O O
HDMI/DVI 60Hz
X O X X O O
Component O O O O O O
-
-
-
-
-
BN68-01593A-Eng.indd 4 2008-05-07 ¿ÀÀü 11:27:10
English - 5
3 SERVICE
Connector for SERVICE only.
4 PC IN [PC] / [AUDIO]
Connect to the video and audio output jack on your PC.
5 ANT IN
To view television channels correctly, a signal must be received by the set from one of the following
sources:
An outdoor aerial / A cable television network / A satellite network
6
Headphones jack
Headphone may be connected to the headphone output on your set. While the head phone is
connected, the sound from the built-in speakers will be disabled.
7
AV IN [VIDEO]/[R-AUDIO-L]
Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio
out connectors on the A/V device.
8 COMPONENT IN
Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of
your set and the other ends to corresponding component video out connectors on the DVD.
If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD
and connect the DVD to component connector ("P
R", "PB", "Y") on your set.
The P
R, PB and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and
R-Y or Y, Cb and Cr.
Connect RCA audio cables (optional) to [R - AUDIO - L] on the rear of your set and the other ends
to corresponding audio out connectors on the DVD.
9 KENSINGTON LOCK (depending on the model)
The Kensington lock (optional) is a device used to physically x the system when used in a public place.
If you want to use a locking device, contact the dealer where you purchased the TV.
The location of the kensington lock may be different depending on its model.
-
-
-
-
-
-
-
-
-
-
-
-
-
BN68-01593A-Eng.indd 5 2008-05-07 ¿ÀÀü 11:27:10
English - 6
TOOLS
1 Television Standby button
2 Selects the TV mode directly
3 Number buttons for direct
channel access
4
One/Two-digit channel selection
5
+
: Volume increase
: Volume decrease
6 Temporary sound switch-off
7 Use to quickly select
frequently used functions.
8
Use to see information on
the current broadcast
9 Colour buttons :
Use these buttons in the
Channel list, etc.
! Displays the Channel List on
screen
@ Available source selection
# Previous channel
$ P
: Next channel
P : Previous channel
%
Returns to the previous
menu
^ Control the cursor in the menu
& Exit the on-screen menu
* Picture size selection
( Displays the main on-screen
menu
) Selects the HDMI mode
directly.
a
Picture effect selection
Teletext Functions
2 Exit from the teletext display
7 Teletext size selection
8 Teletext reveal
9 Fastext topic selection
0
Alternately select Teletext,
Double, or Mix.
! Teletext store
@
Teletext mode selection
(LIST/FLOF)
# Teletext sub page
$
P : Teletext next page
P : Teletext previous page
% Teletext hold
& Teletext cancel
( Teletext index
The performance of the remote control may be affected by
bright light.
Viewing the Remote Control
BN68-01593A-Eng.indd 6 2008-05-07 ¿ÀÀü 11:27:10
English - 7
1. Lift the cover at the back of the remote control upward as shown in the
figure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t
be using the remote control for a long time.
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special uorescent light or neon sign nearby?
Installing Batteries in the Remote Control
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on your set.
2. Press the button on your set.
You also can press the POWER button or the TV button on the remote control to turn the TV
on.
The channel that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on your set.
When you switch the set on for the very rst time, you will be asked to choose language in which the
menus are to be displayed.
4. To switch your set off, press the POWER button again.
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1.
Press the POWER button on the remote control.
The screen is turned off and a red standby indicator appears on your set.
2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV button or
channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday,
for example).
It is best to unplug the set from the mains and aerial.
Placing Your Television in Standby Mode
BN68-01593A-Eng.indd 7 2008-05-07 ¿ÀÀü 11:27:11
English - 8
You can use the TOOLS button to select your frequently
used functions quickly and easily. The “Tools” menu change
depending on which external input mode you are viewing.
1.
Press the TOOLS button.
The “Tools” menu will appear.
2. Press the ▲ or ▼ button to select a menu.
3. Press the ▲/▼/◄/►/ENTER
buttons to display, change, or
use the selected items. For a more detailed description of each
function, refer to the corresponding page.
• Picture Mode, see page 15
• Sound Mode, see page 21
• Sleep Timer, see page 23
• SRS TS XT, see page 21
• Energy Saving, see page 25
• Dual l-ll, see page 22
• PIP, see page 20
• Auto Adjustment, see page 29
TOOLS
1. With the power on, press the MENU button.
The main menu appears on the screen. The menu’ s left side
has icons: Picture, Sound, Channel, Setup, Input.
2. Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER
button to access the icon’s sub-
menu.
3. Press the EXIT button to exit.
The on-screen menus disappear from the screen after about
one minute.
Viewing the Menus
Using the TOOLS Button
Picture
Mode : Standard
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Picture Options
Reset : OK
TV
Move Enter Return
TOOLS
Picture Mode Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
Tools
Move Adjust Exit
BN68-01593A-Eng.indd 8 2008-05-07 ¿ÀÀü 11:27:12
English - 9
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
1.
Press the POWER button on the remote control.
The message "Start Plug & Play." is displayed with "OK"
selected.
2. Select the appropriate language by pressing the
or
button.
Press the
ENTER
button to confirm your choice.
3. Press the
or
button to select “Store Demo” or “Home Use”, then the ENTER
button.
We recommend setting the TV to "Home Use" mode for the best picture in your home
environment.
"Store Demo" mode is only intended for use in retail environments.
If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”
(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and
hold the MENU button on the TV for 5 seconds
4. The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER
button.
Please check that the antenna cable is connected correctly.
5. Select the appropriate country by pressing the
or
button.
Press the ENTER
button to confirm your choice.
6.
The "Auto Store" menu is displayed with the "Start" selected. Press the
ENTER
button.
The channel search will start and end automatically.
After all the available channels are stored, the "Clock Set" menu appears.
Press the ENTER
button at any time to interrupt the memorization process.
7. Press the ENTER
button.
Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the
or
button.
Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the
or
button.
You can also set the “Month”, “Day”, “Year”, “Hour” and "Minute" by pressing the number buttons
on the remote control.
8. Press the ENTER
button to confirm your setting. The message “Enjoy your viewing” is displayed.
When you have finished, press the
ENTER
button.
Even if the ENTER
button is not pressed, the message will automatically disappear after
several seconds.
Language
: Select your language.
Country
: Select your country.
Auto Store
: Automatically scans for and stores channels available in the local area.
Clock Set
: Sets the current time for the TV clock.
Plug & Play
Plug & Play
Start Plug & Play.
Enter
OK
BN68-01593A-Eng.indd 9 2008-05-07 ¿ÀÀü 11:27:12
English - 10
If you want to reset this feature...
1.
Press the MENU button to display the menu.
Press the
or
button to select "Setup" then press the
ENTER button.
2. Press the ENTER
button again, to select "Plug & Play".
For further details on setting up options, refer to the page 9.
The “Plug & Play” feature is only available in the TV mode.
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However, you can sort numbers manually
and clear any channels you do not wish to watch.
1. Press the MENU button to display the menu.
Press the
or
button to select "Channel", then press the
ENTER
button.
2. Press the ENTER
button to select "Country".
3. Select the appropriate country by pressing the
or
button.
Press the ENTER
button to confirm your choice.
4. Press the
or
button to select "Auto Store", then press the ENTER
button.
5. Press the ENTER
button.
The TV will begin memorizing all of the available channels.
Press the
ENTER
button at any time to interrupt the memorization process and return to the
"Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears. (refer to page 13)
Storing Channels Automatically
TV
Setup
Plug & Play
Language : English
Time
Melody : Off
Energy Saving : Off
PIP
Move Enter Return
TV
Channel
Country : United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move Enter Return
BN68-01593A-Eng.indd 10 2008-05-07 ¿ÀÀü 11:27:13
English - 11
Storing Channels Manually
You can store television channels, including those received
via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish
to identify.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "Manual Store", then press
the ENTER
button.
3. Select the required option by pressing the ▲ or ▼ button,
then press the ENTER
button.
4. When you are satisfied with your setting, press the
ENTER
button.
5.
Press the EXIT button to exit.
Programme (Programme number to be assigned to a channel)
− Press the ▲ or ▼ button until you find the correct number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
Colour System: Auto/PAL/SECAM/NTSC4.43
− Press the ▲ or ▼ button to select the required colour standard.
Sound System: BG/DK/I/L
− Press the ▲ or ▼ button to select the required sound standard.
Channel (When you know the number of the channel to be stored)
− Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).
− Press the ► button, then press the ▲ or ▼ button to select the required number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
If there is abnormal sound or no sound, re-select the sound standard required.
Search (When you do not know the channel numbers)
− Press the ▲ or ▼ button to start the search.
The tuner scans the frequency range until the first channel or the channel that you selected is
received on the screen.
Store (When you store the channel and associated programme number)
− Set to "OK" by pressing the ENTER
button.
Channel mode
P (Programme mode): When completing tuning, the broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You can select a channel by entering the position
number in this mode.
C (Air channel mode): You can select a channel by entering the assigned number to each air
broadcasting station in this mode.
S (Cable channel mode): You can select a channel by entering the assigned number for each
cable channel in this mode.
Channel
Country : United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move Enter Return
TV
Manual Store
Programme : P 1
Colour System : Auto
Sound System : BG
Channel : S 6
Search : 140 MHz
Store : ?
Move Enter Return
TV
BN68-01593A-Eng.indd 11 2008-05-07 ¿ÀÀü 11:27:13
English - 12
Using the Channel Manager, you can conveniently lock or add
channels.
1.
Press the MENU button to display the menu.
Press the
or
button to select "Channel", then press the
ENTER
button.
2. Press the
or
button to select "Channel Manager",
then press the ENTER
button.
Adding channels
Using the Channel List, you can add channels.
3. Select "Channel List" by pressing the ENTER
button.
4. Move to the ( ) field by pressing the ▲, ▼, ◄ or ►
button, select a channel to be added, and press the
ENTER
button to add the channel.
If you press the
ENTER
button again, the ( ) symbol
next to the channel disappears and the channel is not
added.
"
" is active when "Child Lock" is selected to "On".
Locking channels
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by muting
out video and audio.
5. Press the
or
button to select "Child Lock", then press
the ENTER
button.
6. Select "On" by pressing the ▲ or ▼ button, then press the
ENTER
button.
7. Press the
or
button to select "Channel List",
then press the ENTER
button.
8. Move to the " " field by pressing the ▲, ▼, ◄ or ► button,
select a channel to be locked, and press the ENTER
button.
If you press the
ENTER
button again, the ( ) symbol
next to the channel disappears and the channel lock is
cancelled.
A blue screen is displayed when "Child Lock" is activated.
9.
Press the EXIT button to exit.
Select "On" or "Off" in "Child Lock" to easily turn the
channels which selected on " " to be active or inactive.
You can select these options by simply pressing the CH LIST
button on the remote control.
Adding / Locking Channels
P 1 C3
Channel List
Move Enter
Page Return
Add Lock
1 / 10
Prog.
0 C--
1 C3
2 BBC 1
3 C74
4 C75
5 C76
6 S3
7 S4
8 S6
9 S7
TOOLS
Channel
Country : United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move Enter Return
TV
TV
Channel Manager
Channel List
Child Lock : Off
Move Enter Return
BN68-01593A-Eng.indd 12 2008-05-07 ¿ÀÀü 11:27:14
English - 13
This operation allows you to change the programme numbers
of the stored channels.
This operation may be necessary after using the auto store.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
button.
2. Press the
or
button to select "Sort", then press the
ENTER
button.
3. Select the channel number that you wish to change by
pressing the ▲ or ▼ button.
Press the
ENTER
button.
The selected channel number and name are moved to
right side.
4. Select the number of the programme to which the channel is to
be moved by pressing the ▲ or ▼ button.
5. Press the
ENTER
button. The channel is moved to its new
position and all other channels are shifted accordingly.
6. Repeat steps 3 to 5 for another channel to be sorted.
7. Press the EXIT button to exit.
Sorting the Stored Channels
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
1.
Press the MENU button to display the menu.
Press the
or
button to select "Channel", then press the
ENTER
button.
2. Press the
or
button to select "Name", then press the
ENTER
button.
3. If necessary, select the channel to be assigned to a new
name by pressing the
or
button. Press the ENTER
button.
The selection bar is displayed around the name box.
4.
The following characters are available: Letters of the alphabet (A~Z) /
Numbers (0~9) / Special characters (+, -, *, /, space)
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
To...
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
Then...
Press the ▲ or ▼ button
Press the ► button
Press the ◄ button
Press the
ENTER
button
Channel
Country : United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
TV
Move Enter Return
Sort
Prog. Ch. Name
0 C-- -----
1 C23 -----
2 S06 -----
3 S07 -----
4 S09 -----
5 S12 -----
6 S13 -----
7 S14 -----
8 S17 -----
9 C21 -----
TV
Move Enter Return
Channel
Country : United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move Enter Return
TV
Name
Move Enter Return
Prog. Ch. Name
0 C-- -----
1 C23 -----
2 S06 -----
3 S07 -----
4 S09 -----
5 S12 -----
6 S13 -----
7 S14 -----
8 S17 -----
9 C21 -----
TV
BN68-01593A-Eng.indd 13 2008-05-07 ¿ÀÀü 11:27:15
English - 14
Use fine tuning to manually adjust a particular channel for
optimal reception.
1.
Use the number buttons to directly select the channel that
you want to fine tune.
2. Press the MENU button to display the menu.
Press the
or
button to select "Channel", then press the
ENTER
button.
3. Press the
or
button to select "Fine Tune", then press
the ENTER
button.
4. Press the
or
button to adjust the fine tuning.
Press the ENTER
button.
5. Press the EXIT button to exit.
Fine tuned channels that have been saved are marked
with an asterisk "
*
" on the right-hand side of the channel
number in the channel banner. And the channel number
turns red.
To reset the ne-tuning, select "Reset" by pressing the
or
button and then press the ENTER
button.
Fine Tuning Channel Reception
Channel
Country : United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
TV
Move Enter Return
Fine Tune
P 1
0
Reset
Adjust Save Return
BN68-01593A-Eng.indd 14 2008-05-07 ¿ÀÀü 11:27:15
English - 15
You can select the type of picture which best corresponds to
your viewing requirements.
1.
Press the MENU button to display the menu.
Press the ENTER
button, to select "Picture".
2. Press the ENTER
button again, to select "Mode".
3. Press the
or
button to select the desired picture effect.
Press the ENTER
button.
4. Press the EXIT button to exit.
Dynamic: Selects the picture for high-definition in a bright
room.
Standard:
Selects the picture for optimum display in a
normal environment.
Movie:
Selects the picture for comfortable display in a
dark room.
The Picture mode must be adjusted separately for each
input source.
Changing the Picture Standard
Picture
Mode : Standard
Backlight
7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Picture Options
Reset : OK
TV
Move Enter Return
Picture
Mode : Standard
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Picture Options
Reset : OK
TV
Move Enter Return
Dynamic
Standard
Movie
Easy Setting
1.
Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select "Picture Mode".
3. Press the ◄ or ► button to select the required option.
4. Press the EXIT or TOOLS button to exit.
Picture Mode Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
Tools
Move Adjust Exit
O You can also press the P.MODE button on the remote control to
select one of the picture settings.
TOOLS
BN68-01593A-Eng.indd 15 2008-05-07 ¿ÀÀü 11:27:16
English - 16
Your set has several settings which allow you to control
picture quality.
1.
To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 15)
2. Press the
or
button to select a particular item. Press the
ENTER
button.
3. Press the
or
button to decrease or increase the value of
a particular item. Press the ENTER
button.
4. Press the EXIT button to exit.
Backlight: Adjusts the screen brightness by adjusting the
LCD backlight brightness. (0~10)
Contrast:
Adjusts the lightness and darkness between
objects and the background.
Brightness: Adjusts the brightness of the whole screen.
Sharpness:
Adjusts the outline of objects to either
sharpen them or make them more dull.
Colour: Adjusts the colours, making them lighter or
darker.
Tint:
Adjusts the colour of objects, making them more red or
green for a more natural look.
The adjusted values are stored according to the selected Picture mode.
In PC mode, you can only make changes to "Backlight", "Contrast" and "Brightness".
In TV, Ext., AV modes of the PAL system, you cannot use the "Tint" Function.
You can return to the factory defaults picture settings by selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 17)
The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and that this will reduce the overall running cost.
Adjusting the Custom Picture
Picture
Mode : Standard
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Picture Options
Reset : OK
TV
Move Enter Return
7
Backlight
Move Adjust Return
BN68-01593A-Eng.indd 16 2008-05-07 ¿ÀÀü 11:27:16
English - 17
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
1.
To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3
on page 15.
2. Press the
or
button to select "Reset", then press the
ENTER
button.
3. Press the
or
button to select "OK" or "Cancel".
Press the ENTER
button.
4. Press the EXIT button to exit.
The "Reset" will be set for each Picture mode.
Picture
Mode : Standard
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Picture Options
Reset : OK
TV
Move Enter Return
OK
Cancel
BN68-01593A-Eng.indd 17 2008-05-07 ¿ÀÀü 11:27:16
English - 18
1. Press the MENU button to display the menu.
Press the ENTER
button, to select "Picture".
2. Press the ▲ or ▼ button to select “Picture Options”, then
press the ENTER
button.
3. Select the required option by pressing the ▲ or ▼ button,
then press the ENTER
button.
4. When you are satisfied with your setting, press the
ENTER
button.
5. Press the EXIT button to exit.
In PC mode, you can only make changes to the
“Colour Tone” and “Size” from among the items in “Picture
Options”.
Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2
You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selected
Picture mode.
“Warm1” or “Warm2” is only activated when the picture mode is "Movie".
Size: Auto Wide/Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan
You can select the picture size which best corresponds to your viewing requirements.
Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
Wide: Adjusts the picture size to 16:10 appropriate for DVDs or wide broadcasting.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom
: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i)
or Component (1080i) signals are input.
"Auto Wide" function is available only in "TV", "Ext." and "AV" mode.
In PC Mode, only "Wide" and "4:3" mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of
the TV.
Temporary image retention may occur when viewing a static image on the set for more than two
hours.
Wide Zoom
: Move the screen up/down using the ▲ or ▼ button after selecting the by
pressing the ► or ENTER
button.
Zoom
: Select by pressing the ◄ or ►button.
Use the ▲ or ▼button to move the picture up and down. After selecting
,
use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.
After selecting “Just Scan” in HDMI (1080i) or Component (1080i) mode:
Select by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER button.
You can initialize the setting.
O You can select these options by simply pressing the P.SIZE
button on the remote control.
Changing the Picture Options
TOOLS
Picture Options
Colour Tone : Normal
Size : Auto Wide
Screen Mode : Wide
Digital NR : Auto
HDMI Black Level
: Normal
Move Enter Return
TV
Picture
Mode : Standard
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Picture Options
Reset : OK
TV
Move Enter Return
BN68-01593A-Eng.indd 18 2008-05-07 ¿ÀÀü 11:27:17
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38

Samsung LE19A650A1 Manuel utilisateur

Catégorie
Téléviseurs LCD
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues