Sony CDX M7810 Manuel utilisateur

Marque: Sony

Modèle: CDX M7810

Catégorie: Récepteurs multimédia de voiture

Taper: Manuel utilisateur

Ce manuel convient également à

Owner’s Record

The model and serial numbers are located on the bottom of the unit.

Record these numbers in the space provided below.

Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No.

Serial No.

CDX-M7815X

CDX-M7810

For installation and connections, see the supplied installation/connections manual.

En ce qui concerne l’installation et les connexions, consulter le manuel

d’installation/raccordement fourni.

Para obtener información sobre la instalación y las conexiones, consulte el manual

de instalación/conexiones suministrado.

Operating Instructions

Mode d’emploi

Manual de instrucciones

masterpage:Right

2-586-657-11 (1)

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\00US+00COV-U.fm

Compact Disc Player

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\01US01INT-U.fm masterpage:Left

Welcome !

Thank you for purchasing this Sony Compact

Disc Player. You can enjoy your drive with the

following functions.

• CD playback

You can play CD-DA (also containing CD

TEXT*), CD-R/CD-RW (MP3 files also

containing Multi Session (page 14)) and

ATRAC CD (ATRAC3 and ATRAC3plus

format (page 15)).

• Radio reception

–You can store up to 6 stations per band (FM1,

FM2, FM3, AM1 and AM2).

–BTM (Best Tuning Memory): the unit selects

strong signal stations and stores them.

–You can assign a name to each radio station,

store it in memory, and display station names

on the list.

• Sound adjustment

–EQ7: You can select an equalizer curve for 7

music types.

–DSO (Dynamic Soundstage Organizer):

creates a more ambient sound field, using

virtual speaker synthesis, to enhance the

sound of speakers, even if they are installed

low in the door.

–BBE MP: improves digitally compressed

sound such as MP3. For details, see the

following explanation.

• Image setting

You can set various display images on the unit.

– Space Producer: creates animated on-screen

patterns in time with the music.

• Optional unit operation

You can also control optional CD/MD changers

and optional Sony portable devices in addition

to playing with this unit.

* A CD TEXT disc is a CD-DA that includes

information such as disc, artist and track name.

Warning

Type of discs Label on the disc

CD-DA

MP3

ATRAC CD

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment

generates, uses, and can radiate radio frequency

energy and, if not installed and used in

accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be

determined by turning the equipment off and on,

the user is encouraged to try to correct the

interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment

and receiver.

– Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

– Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate this

equipment.

The use of optical instruments with this produc

will increase eye hazard.

CAUTION

Warning if your car’s ignition has no

ACC position

After turning the ignition off, be sure to press

and hold (OFF) on the unit until the display

disappears.

Otherwise, the display does not turn off and

this causes battery drain.

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\00US+00COV-UTOC.fm masterpage:Right

Table of Contents

Getting Started

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 4

Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 4

DEMO mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Detaching the front panel . . . . . . . . . . . . . . . . . 4

Attaching the front panel . . . . . . . . . . . . . . . 5

Inserting the disc in the unit . . . . . . . . . . . . . . . 5

Ejecting the disc . . . . . . . . . . . . . . . . . . . . . . 5

Adjusting the angle of the front panel. . . . . . . . 5

Location of controls and basic

operations

Main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Card remote commander RM-X143A . . . . . 6

Display items . . . . . . . . . . . . . . . . . . . . . . . . 8

Repeat and shuffle play . . . . . . . . . . . . . . . . 8

Radio

Storing and receiving stations . . . . . . . . . . . . . . 8

Storing automatically — BTM . . . . . . . . . . 8

Storing manually . . . . . . . . . . . . . . . . . . . . . 8

Receiving the stored stations . . . . . . . . . . . . 8

Tuning automatically . . . . . . . . . . . . . . . . . . 9

Receiving a station through a list

— LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Other functions

Changing the sound settings. . . . . . . . . . . . . . . 9

Adjusting the sound characteristics . . . . . . . 9

Adjusting the equalizer curve

— EQ7 Tune . . . . . . . . . . . . . . . . . . . . . . . . 9

Labeling a station/disc . . . . . . . . . . . . . . . . . . 10

Adjusting menu items — MENU . . . . . . . . . . 10

Using optional equipment. . . . . . . . . . . . . . . . 12

CD/MD changer . . . . . . . . . . . . . . . . . . . . 12

Rotary commander RM-X4S . . . . . . . . . . 12

Auxiliary audio equipment . . . . . . . . . . . . 13

Additional Information

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Notes on discs . . . . . . . . . . . . . . . . . . . . . . 14

About MP3 files . . . . . . . . . . . . . . . . . . . . 14

About ATRAC CD . . . . . . . . . . . . . . . . . . 15

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Removing the unit. . . . . . . . . . . . . . . . . . . . . . 16

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 16

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 17

Error displays/Messages . . . . . . . . . . . . . . 18

SonicStage and its logo are trademarks of Sony

Corporation.

ATRAC, ATRAC3, ATRAC3plus and their logos

are trademarks of Sony Corporation.

The BBE MP process

improves digitally

compressed sound, such as

MP3, by restoring and enhancing the higher

harmonics lost through compression. BBE MP

works by generating even-order harmonics from

the source material, effectively recovering

warmth, detail and nuance.

The “XM Ready” logo indicates that

this product will control an XM tuner

module (sold separately). Please see

your nearest authorized Sony dealer for

details on the XM tuner module.

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:Left

Getting Started

Resetting the unit

Before operating the unit for the first time, or

after replacing the car battery or changing the

connections, you must reset the unit.

Detach the front panel and press the RESET

button with a pointed object, such as a ball-point

pen.

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

Setting the clock

The clock uses a 12-hour digital indication.

1 Press (MENU).

2 Rotate the SEEK control dial until

“Setup” appears, then press (ENTER).

3 Rotate the SEEK control dial until

“Clock Adjust” appears, then press

(ENTER).

The clock adjustment display appears.

4 Rotate the SEEK control dial to set the

hour and minute.

To move the digital indication, press

(ENTER).

5 After setting the minute, press

(ENTER).

The clock starts.

To display the clock during playback/reception,

set “Clock on” (page 11).

With the card remote commander

In steps 2 to 4: press M or m instead of the SEEK

control dial; in step 4: press < or , instead of

(ENTER).

DEMO mode

When the unit is turned off, the clock is

displayed first, then demonstration (DEMO)

mode starts the demonstration display.

To cancel the DEMO mode, set to “Demo off” in

menu (page 11) while the unit is turned off.

Detaching the front panel

You can detach the front panel of this unit to

prevent theft.

Caution alarm

If you turn the ignition switch to the OFF

position without detaching the front panel, the

caution alarm will sound for a few seconds.

The alarm will only sound if the built-in

amplifier is used.

1 Press (OFF).

The unit is turned off.

2 Press .

The left of the front panel is released.

3 Slide the front panel to the left, then

gently pull out the front panel towards

you.

Notes

• Do not drop or put excessive pressure on the front

panel and display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in a parked

car or on a dashboard/rear tray.

Tip

When carrying the front panel, use the supplied front

panel case.

RESET button

(OFF)

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:RightH:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:Right

Attaching the front panel

Place the hole A of the front panel onto the

spindle B on the unit, then lightly push the left

side in.

Press (SOURCE) on the unit (or insert a disc) to

operate the unit.

Note

Do not put anything on the inner surface of the front

panel.

Inserting the disc in the unit

1 Press Z.

The front panel slides down automatically.

2 Insert the disc (label side up).

The front panel slides up automatically, then

playback starts automatically.

Ejecting the disc

1 Press Z.

The front panel slides down automatically,

then the disc is ejected.

2 Press Z to close the front panel.

Note

The front panel slides up automatically after 15

seconds of the front panel sliding down.

Adjusting the angle of the front

panel

1 Press and hold (ANGLE) repeatedly

until the front panel is angled

accordingly.

The front panel can be set to 3 positions.

To return the front panel to its default position,

press and hold (ANGLE) repeatedly until the

front panel is returned to its default position.

Tips

• After the front panel slides down (to insert the disc),

it returns to the position you set again automatically.

• The front panel angle you set is stored in the unit.

When the ignition is turned off, the front panel

returns to its default position. When the ignition is

turned on, the front panel moves to the angle you

set.

ANGLE

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:Left

Location of controls and basic operations

Main unit

Card remote commander

RM-X143A

Refer to the pages listed for details. The

corresponding buttons on the card remote

commander control the same functions as those

on the unit.

A MODE button 8, 12

To select the radio band (FM/AM)/select the

unit*

B OFF button

To power off/stop the source.

C VOL (volume) control dial/SOUND

button 9

To adjust volume (rotate); select sound items

(press).

D Display window

E Disc slot 5

To insert the disc.

F SEEK control dial/ENTER button

To select items (rotate); complete a setting

(press).

Radio:

To tune in stations: press (ENTER)

repeatedly to select “SEEK,” “MANUAL,”

or “PRESET,” then rotate the SEEK control

dial until the desired station appears.

CD:

To skip tracks or groups: press (ENTER)

repeatedly to select ./> or “GROUP,”

then rotate the SEEK control dial until the

desired track or group appears.

G MENU button

To enter menu.

H Z (eject)/ANGLE button 5

To eject the disc/slide down the front panel

(press); angle the front panel in 3 positions

(press and hold).

MODE

SEEK

VOL

–

IMAGE

ANGLE

OFF

REP SHUF BBE MP PAUSE

SOURCE DSPL1

2534

PUSH SOUND PUSH ENTER

CDX-M7815X

CDX-M7810

12 3 4 6578

qaq; qs qd qf qg

DISC

–

ATTOFF

SCRL

DSPL

MODE

SOURCE

DISC

SEEK

–

SOUND

ENTER

LIST

CAT

EQ7 DSO

VOL

–

OPEN/CLOSE

REP SHUF

BBE MP PAUSE

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:RightH:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:Right

I (front panel release) button 4

J SOURCE button

To power on/change the source (Radio/CD/

MD*

/AUX*

K Number buttons

Radio:

To receive stored stations (press); store

stations (press and hold).

CD/MD*

(1): REP 8

(2): SHUF 8

(5): BBE MP*

To activate the BBE MP function, set “BBE

MP-on.” To cancel, set “BBE MP-off.”

(6): PAUSE*

To pause playback. To cancel, press again.

L RESET button 4

M DSPL (display) button 8, 10

To change display items.

N Receptor

To receive signals from the card remote

commander or wireless rotary commander.

O IMAGE button 2

To select the display image.

Space Producer mode t Movie mode 1-2

t Spectrum analyzer mode 1-5 t

Wall paper mode 1-3 t normal play/

reception mode

The following buttons on the card remote

commander have also different buttons/functions

from the unit.

qh SCRL (scroll) button 8

To scroll the display item.

qj EQ7 (equalizer) button

To select an equalizer type (Xplod, Vocal,

Club, Jazz, New Age, Rock, Custom or off).

qk </, (SEEK –/+) buttons

Radio:

To tune in stations automatically (press); find

a station manually (press and hold).

CD:

To skip tracks (press); skip tracks

continuously (press, then press again within

about 1 second and hold); fast-forward/

reverse a track (press and hold).

ql SOUND button 9

To select sound items.

w; VOL (volume) +/– button

To adjust volume.

wa OPEN/CLOSE button

To open/close the front panel.

ws DSO button 2

To select the DSO mode (1, 2, 3 or off). The

larger the number, the more enhanced the

effect.

wd LIST/CAT*

button 9, 12

To list up.

wf M/m (DISC +/–) buttons

To select preset stations/skip groups (press);

skip groups continuously (press and hold).

wg ATT (attenuate) button

To attenuate the sound. To cancel, press

again.

*1 When a CD/MD changer is connected.

*2 When an MD changer is connected.

*3 When an optional Sony portable device is

connected.

*4 When playing back on this unit.

*5 When the XM tuner is connected.

Note

If the unit is turned off and the display disappears, it

cannot be operated with the card remote commander

unless (SOURCE) on the unit is pressed, or a disc is

inserted to activate the unit first.

Tip

For details on how to replace the battery, see

“Replacing the lithium battery of the card remote

commander” on page 15.

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:Left

For details on connecting to a CD/MD changer,

see page 12.

Display items

Example: when you select the normal play mode

by pressing (IMAGE) repeatedly (page 7).

A Source

B MP3/ATRAC3 plus indication

C Clock*

D BBE indication

E Group number/Track number/Elapsed

playing time, Disc/artist name, Group name,

Track name, Text information*

*1 When the clock mode is set to “on” (page 11).

*2 When playing an MP3, ID3 tag is displayed and

when playing a ATRAC CD, text information written

by SonicStage, etc. is displayed.

To change display items E, press (DSPL);

scroll display items E, press (SCRL) on the

card remote commander or set to “A.Scroll on”

(page 11).

Tip

Displayed items will differ, depending on the disc type,

recorded format and settings. For details on MP3, see

page 14; ATRAC CD, see page 15.

Repeat and shuffle play

1 During playback, press (1) (REP) or

(2) (SHUF) repeatedly until the

desired setting appears.

* When an MP3/ATRAC CD is played.

To return to normal play mode, select “REP-off”

or “SHUF-off.”

Radio

Storing and receiving stations

Caution

When tuning in stations while driving, use Best

Tuning Memory (BTM) to prevent an accident.

Storing automatically — BTM

1 Press (SOURCE) repeatedly until

“TUNER” appears.

To change the band, press (MODE)

repeatedly. You can select from FM1, FM2,

FM3, AM1 or AM2.

2 Press (MENU).

3 Rotate the SEEK control dial until

“Edit” appears, then press (ENTER).

4 Rotate the SEEK control dial until

“BTM” appears, then press (ENTER).

The unit stores stations in order of frequency

on the number buttons.

A beep sounds when the setting is stored.

With the card remote commander

In steps 3 and 4: press M or m instead of the SEEK

control dial.

Storing manually

1 While receiving the station that you

want to store, press and hold a

number button ((1) to (6)) until

“Memory” appears.

The number button indication appears in the

display.

Note

If you try to store another station on the same number

button, the previous stored station will be replaced.

Receiving the stored stations

1 Select the band, then press a number

button ((1) to (6)).

Tip

Another way to receive the stored stations is to press

(ENTER) repeatedly until “PRESET” appears, then

rotate the SEEK control dial until the desired preset

number appears.

Select To play

REP-Track track repeatedly.

REP-Group* group repeatedly.

SHUF-Group* group in random order.

SHUF-Disc disc in random order.

ABC

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:RightH:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:Right

Tuning automatically

1 Select the band, then press (ENTER)

repeatedly until “SEEK” appears, then

rotate the SEEK control dial to search

for the station.

Scanning stops when the unit receives a

station. Repeat this procedure until the

desired station is received.

Tip

If you know the frequency of the station you want to

listen to, press (ENTER) repeatedly until “MANUAL”

appears, then rotate the SEEK control dial until the

desired frequency appears.

Receiving a station through a list

— LIST

You can list up the frequency or the name. For

details on labeling a station, see page 10.

1 Select the band, then press (MENU).

2 Rotate the SEEK control dial until

“List” appears, then press (ENTER).

The frequency or station name appears.

3 Rotate the SEEK dial until the desired

station appears.

4 Press (ENTER) to receive the station.

The display returns to normal reception

mode.

With the card remote commander

Select the band, then press (LIST). Press M or m

repeatedly until the desired station appears, then

press (ENTER).

Other functions

Changing the sound settings

Adjusting the sound

characteristics

You can adjust the equalizer, DSO, bass, treble,

balance, fader and subwoofer volume.

1 Select a source, then press (SOUND)

repeatedly to select the desired item.

The item changes as follows:

EQ7 t DSO t BAS (bass) t

TRE (treble) t BAL (left-right) t

FAD (front-rear) t SUB (subwoofer

volume)*

* “ ∞” is displayed at the lowest setting, and can be

adjusted up to 20 steps.

2 Rotate the VOL control dial repeatedly

to adjust the selected item.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

Note

Adjust within 3 seconds of selecting the item.

With the card remote commander

In step 2: press < or , instead of the VOL control

dial.

Adjusting the equalizer curve

— EQ7 Tune

You can adjust and store the equalizer settings

for different tone ranges.

1 Select a source, then press (MENU).

2 Rotate the SEEK control dial until

“Sound” appears, then press (ENTER).

3 Rotate the SEEK control dial until

“EQ7 Tune” appears, then press

(ENTER).

4 Rotate the SEEK control dial to select

the desired equalizer type, then press

(ENTER).

5 Rotate the SEEK control dial to adjust

the desired volume level.

The volume level is adjustable in 1 dB steps,

from –10 dB to +10 dB.

continue to next page t

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:Left

6 Press (ENTER) to move to the next

frequency.

The frequency changes as follows:

62Hz t 157Hz t 396Hz t 1.0kHz t

2.5kHz t 6.3kHz t 16kHz

Repeat steps 5 and 6 to adjust the equalizer

curve.

The confirmation dialog appears after

adjusting “16kHz” and pressing (ENTER).

7 Rotate the SEEK control dial to select

“YES,” then press (ENTER).

The setting is complete and the display

returns to normal play/reception mode.

To restore the factory-set equalizer curve, press

and hold (ENTER) in step 5 or 6, then rotate the

SEEK control dial to select “YES.”

With the card remote commander

In steps 2, 3 and 5: press M or m instead of the SEEK

control dial; in steps 4 and 7: press < or , instead

of the SEEK control dial; in step 6: press < or ,

instead of (ENTER).

Labeling a station/disc

When you receive a station, or play a disc in a

CD changer with the CUSTOM FILE function,

you can label each station/disc with a custom

name up to 8 characters (Station Memo/Disc

Memo).

If you label a station/disc, the name appears on

the list (page 9 or 12).

1 While receiving a station or playing a

disc that you want to label, press

(MENU).

2 Rotate the SEEK control dial until

“Edit” appears, then press (ENTER).

3 Rotate the SEEK control dial until

“Name Edit” appears, then press

(ENTER).

4 Rotate the SEEK control dial until the

desired character appears.

The character changes as follows:

A y B y C ... y 0 y 1 y 2 ... y +

y – y ... y (blank space) y A

To move the digital indication, press

(ENTER).

Repeat this operation until the entire name is

entered.

The confirmation dialog appears after

entering the far right character and pressing

(ENTER).

5 Rotate the SEEK control dial to select

“YES,” then press (ENTER).

The setting is complete and the display

returns to the normal reception/play mode.

To display the name, press (DSPL) during

reception/playback.

Tips

• To correct or erase a character, overwrite or enter

“.”

• The Disc Memo always takes priority over any

prerecorded title.

• You can label a disc on the unit if a changer with the

CUSTOM FILE function is connected.

• “REP-Track” and all shuffle play are suspended until

the labeling is complete.

With the card remote commander

In steps 2 to 4: press M or m instead of the SEEK

control dial; in step 4: press < or , to move the

digital indication; in step 5: press < or , instead of

the SEEK control dial.

Deleting the custom name

1 Select the radio, or the unit that has stored the

custom name you want to delete, then press

(MENU).

2 Rotate the SEEK control dial until “Edit”

appears, then press (ENTER).

3 Rotate the SEEK control dial until “Name

Delete” appears, then press (ENTER).

The stored name will appear.

4 Rotate the SEEK control dial to select the

name you want to delete.

5 Press (ENTER).

The confirmation dialog appears.

6 Rotate the SEEK control dial to select “YES,”

then press (ENTER).

The name is deleted, and “Continue” appears

if the other names are stored. If you want to

delete other names, rotate the SEEK control

dial to select “YES,” then repeat steps 4 to 6.

7 Press (MENU).

The unit returns to normal reception/play

mode.

With the card remote commander

In steps 2 to 4: press M or m instead of the SEEK

control dial; in step 6: press < or , instead of the

SEEK control dial.

Adjusting menu items — MENU

1 Press (MENU).

2 Rotate the SEEK control dial until the

desired menu item appears, then

press (ENTER).

The items changes as follows:

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:RightH:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:Right

Setup y Display y Receive Mode

y Sound y Edit y List

3 Rotate the SEEK control dial until

desired setting item appears, then

press (ENTER).

The digital indication moves to the right

(setting selection) side.

4 Rotate the SEEK control dial to select

the setting, then press (ENTER).

The setting is complete.

5 Press (MENU).

The display returns to normal play/reception

mode.

Note

Displayed items will differ, depending on the source

and setting.

With the card remote commander

In steps 2 and 3: press M or m instead of the SEEK

control dial; in step 4, press < or , instead of the

SEEK control dial.

The following items can be set (follow the page

reference for details):

“

z” indicates the default settings.

Setup

Display

Receive Mode

Sound

Clock Adjust (page 4)

Beep

To set “on” (z) or “off.”

AUX-A*

(AUX Audio)

To turn the AUX source display “on” (

z) or “off”

(page 13).

Clock (Clock Information)

To display the clock and the display items/image

at the same time.

–“on”: to display at the same time.

–“off” (

z): to not display at the same time.

A.IMG (Auto Image)

Auto Image mode automatically steps (every 10

seconds) through the display images.

–“off” (

z): to not change the image

automatically.

–“SA”: to step repeatedly through the display

images of Spectrum analyzer.

–“Movie”: to step repeatedly through the

display images of Movie mode.

–“All”: to step repeatedly through the display

images in all display modes.

Info (Display Information)

To display the items (depending on the source,

etc.) at the middle of the display while a image

is displayed.

–“on” (

z): to display the items.

–“off”: to not display any items.

Dimmer

To change the brightness of the display.

–“Auto” (

z): to dim the display automatically

when you turn lights on.

–“on”: to dim the display.

–“off”: to deactivate the dimmer.

Demo*

(Demonstration)

To set “on” (z) or “off” (page 4).

A.Scroll (Auto Scroll)

To scroll long displayed item automatically

when the disc/group/track is changed.

–“on”: to scroll.

–“off” (

z): to not scroll.

Local (Local seek mode)

–“on”: to only tune into stations with stronger

signals.

–“off” (

z): to tune normal reception.

Mono (Monaural mode)

To improve poor FM reception, select monaural

reception mode.

–“on”: to hear stereo broadcasts in monaural.

–“off” (

z): to hear stereo broadcast in stereo.

–“Auto” (z): to narrow automatically the

reception frequency to eliminate noise.

–“Wide”*

: to always hear FM stereo

broadcasts in stereo and with full the

frequency signal reception.

EQ7 Tune (page 9)

HPF (High Pass Filter)

To select the front/rear speaker cut-off

frequency: “off” (

z), “78Hz” or “125Hz.”

LPF (Low Pass Filter)

To select the subwoofer cut-off frequency: “off”

(

z), “125Hz” or “78Hz.”

Loudness

To enhance bass and treble at lower volume.

–“on”: to reinforce bass and treble.

–“off” (

z): to not reinforce bass and treble.

AUX Level

To adjust the volume level for each connected

auxiliary equipment (page 13). This setting

negates the need to adjust the volume level

between sources.

continue to next page t

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:Left

Edit

*1 When the unit is turned off.

*2 In such cases, some FM stereo broadcasts may

become monaural while in the stereo reception

mode.

Using optional equipment

CD/MD changer

Selecting the changer

1 Press (SOURCE) repeatedly until “CD” or

“MD” appears.

2 Press (MODE) repeatedly until the desired

changer appears.

Playback starts.

* When MDLP disc is played.

Skipping discs

1 During playback, press (ENTER) until

“DISC” appears.

2 Rotate the SEEK control dial until the desired

disc appears.

Skipping groups and discs with the

card remote commander

1 During playback, press M or m.

Repeat and shuffle play

1 During playback, press (1) (REP) or (2)

(SHUF) repeatedly until the desired setting

appears.

*1 When one or more CD/MD changers are

connected.

*2 When one or more CD changers, or two or more

MD changers are connected.

To return to normal play mode, select “REP-off”

or “SHUF-off.”

Tip

“SHUF-All” will not shuffle tracks between CD units

and MD changers.

Locating a disc by name — LIST

You can select a disc from the list when

connecting a CD changer with the CUSTOM

FILE function or an MD changer.

If you assign a name to a disc, the name appears

on the list. For details on labeling a disc, see

page 10.

1 During playback, press (MENU).

2 Rotate the SEEK control dial until “List”

appears, then press (ENTER).

The disc number or disc name appears.

3 Rotate the SEEK control dial until the desired

disc appears.

4 Press (ENTER) to play the disc.

The display returns to normal play mode.

With the card remote commander

During playback, press (LIST). Press M or m

repeatedly until the desired disc appears, then press

(ENTER).

Rotary commander RM-X4S

Attaching the label

Attach the indication label depending on how

you mount the rotary commander.

Name Edit (page 10)

Name Delete (page 10)

BTM (page 8)

To skip Press M or m.

group and release (hold for a

moment).

group

continuously

within 2 seconds of first

releasing.

discs repeatedly.

discs

continuously

then, press again within 2

seconds and hold.

Disc

number

Unit

number

LP2/LP4

indication*

Select To play

REP-Disc*

disc repeatedly.

SHUF-

Changer*

tracks in the changer in random

order.

SHUF-All*

tracks in all units in random

order.

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:RightH:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:Right

Location of controls

The corresponding buttons on the rotary

commander control the same functions as those

on this unit or the card remote commander.

The following controls on the rotary commander

require a different operation from the unit.

• PRESET/DISC control

To control radio/CD, the same as M or m on

card remote commander (push in and rotate).

• VOL (volume) control

The same as the volume control dial on the unit

(rotate).

• SEEK/AMS control

To control radio/CD, the same as < or , on

card remote commander (rotate, or rotate and

hold).

Changing the operative direction

The operative direction of the controls is factory-

set as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

1 While pushing the VOL control, press and

hold (SOUND).

Auxiliary audio equipment

You can connect optional Sony portable devices

to the BUS AUDIO IN/AUX IN terminal on the

unit. If the changer or other device is not

connected to the terminal, the unit allows you to

listen to the portable device on your car speakers.

Note

When connecting a portable device, be sure BUS

CONTROL IN is not connected. If a device is

connected to BUS CONTROL IN, “AUX” cannot be

selected with (SOURCE).

Tip

When connecting both a portable device and a

changer, use the optional AUX-IN selector.

Selecting auxiliary equipment

1 Press (SOURCE) repeatedly until “AUX”

appears.

Operate by the portable device itself.

To adjust the volume level of auxiliary

equipment, see “AUX Level” on page 11.

OFF

ATT

SOUND

SOURCE

DSPL

MODE

OFF

VOL

SEEK/AMS

PRESET/

DISC

To increase

To decrease

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:Left

Additional Information

Precautions

• If your car has been parked in direct sunlight,

allow the unit to cool off before operating it.

• Power antenna will extend automatically while the

unit is operating.

Moisture condensation

On a rainy day or in a very damp area, moisture

condensation may occur inside the lenses and

display of the unit. Should this occur, the unit will

not operate properly. In such a case, remove the disc

and wait for about an hour until the moisture has

evaporated.

To maintain high sound quality

Be careful not to splash juice or other soft drinks

onto the unit or discs.

Notes on discs

• To keep a disc clean, do not touch its surface.

Handle the disc by its edge.

• Keep your discs in their cases or disc magazines

when not in use.

• Do not subject discs to heat/high temperature.

Avoid leaving them in a parked car or on a

dashboard/rear tray.

• Do not attach labels, or use discs with sticky ink/

residue. Such discs may stop spinning when used,

causing a malfunction, or may ruin the disc.

• Do not use any discs with labels or stickers

attached.

The following malfunctions may result from using

such discs:

– Inability to eject a disc (due to a label or sticker

peeling off and jamming the eject mechanism).

– Inability to read audio data correctly (e.g.,

playback skipping, or no playback) due to heat

shrinking of a sticker or label causing a disc to

warp.

• Discs with non-standard shapes (e.g., heart,

square, star) cannot be played on this unit.

Attempting to do so may damage the unit. Do not

use such discs.

• You cannot play 8 cm (3

/4 in) CDs.

• Before playing, clean the discs

with a commercially available

cleaning cloth. Wipe each disc

from the center out. Do not use

solvents such as benzine,

thinner, commercially available

cleaners, or antistatic spray

intended for analog discs.

Notes on CD-R/CD-RW discs

• Some CD-Rs/CD-RWs (depending on the

equipment used for its recording or the condition

of the disc) may not play on this unit.

• You cannot play a CD-R/a CD-RW that is not

finalized.

Music discs encoded with copyright

protection technologies

This product is designed to play back discs that

conform to the Compact Disc (CD) standard.

Recently, various music discs encoded with

some record companies. Please be aware that among

those discs, there are some that do not conform to

the CD standard and may not be playable by this

product.

About MP3 files

MP3, which stands for MPEG-1 Audio Layer-3, is a

music file compression format standard. It

compresses audio CD data to approximately 1/10 of

its original size.

• The unit is compatible with the ISO 9660 level 1/

level 2 format, Joliet/Romeo in the expansion

format, ID3 tag version 1.0, 1.1, 2.2, 2.3 and 2.4,

and Multi Session.

• The maximum number of:

– folders (groups): 150 (including root and empty

folders).

– MP3 files (tracks) and folders contained in a

disc: 300 (if a folder/file names contain many

characters, this number may become less than

300).

– displayable characters for a folder/file name is

32 (Joliet), or 32/64 (Romeo); ID3 tag is 15/30

characters (1.0, 1.1, 2.2 and 2.3), or 63/126

characters (2.4).

Playback order of MP3 files

Folder

(group)

MP3 file

(track)

MP3

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:RightH:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:Right

Notes

• Be sure to finalize the disc before using on the unit.

• When naming an MP3 file, be sure to add the file

expansion “.mp3” to the file name.

• If you play a high-bit-rate MP3, such as 320 kbps,

sound may be intermittent.

• During playback of a VBR (variable bit rate) MP3 file

or fast-forward/reverse, elapsed playing time may

not display accurately.

• When the disc is recorded in Multi Session, only the

first track of the first session format is recognized

and played (any other format is skipped). The

priority of the format is CD-DA, ATRAC CD and

MP3.

– When the first track is a CD-DA, only CD-DA of the

first session is played.

– When the first track is not a CD-DA, an ATRAC CD

or MP3 session is played. If the disc has no data in

any of these formats, “NO Music” is displayed.

About ATRAC CD

ATRAC3plus format

ATRAC3, which stands for Adaptive Transform

Acoustic Coding3, is audio compression

technology. It compresses audio CD data to

approximately 1/10 of its original size.

ATRAC3plus, which is an extended format of

ATRAC3, compresses the audio CD data to

approximately 1/20 of its original size. The unit

accepts both ATRAC3 and ATRAC3plus format.

ATRAC CD

ATRAC CD is recorded audio CD data which is

compressed to ATRAC3 or ATRAC3plus format

using authorized software, such as SonicStage 2.0 or

later, or SonicStage Simple Burner.

• The maximum number of:

– folders (groups): 255

– files (tracks): 999

• The characters for a folder/file name and text

information written by SonicStage is displayed.

For details on ATRAC CD, see the SonicStage or

SonicStage Simple Burner manual.

Note

Be sure to create the ATRAC CD using authorized

software, such as SonicStage 2.0 or later, or

SonicStage Simple Burner 1.0 or 1.1, which are

supplied with Sony Network products.

If you have any questions or problems concerning

your unit that are not covered in this manual, consult

your nearest Sony dealer.

Maintenance

Replacing the lithium battery of the

card remote commander

Under normal conditions, the battery will last

approximately 1 year. (The service life may be

shorter, depending on the conditions of use.)

When the battery becomes weak, the range of the

card remote commander becomes shorter. Replace

the battery with a new CR2025 lithium battery. Use

of any other battery may present a risk of fire or

explosion.

Notes on the lithium battery

• Keep the lithium battery out of the reach of children.

Should the battery be swallowed, immediately

consult a doctor.

• Wipe the battery with a dry cloth to assure a good

contact.

• Be sure to observe the correct polarity when

installing the battery.

• Do not hold the battery with metallic tweezers,

otherwise a short-circuit may occur.

Fuse replacement

When replacing the fuse, be

sure to use one matching the

amperage rating stated on the

original fuse. If the fuse blows,

check the power connection and

replace the fuse. If the fuse

blows again after replacement,

there may be an internal

malfunction. In such a case,

consult your nearest Sony

dealer.

continue to next page t

+ side up

WARNING

Battery may explode if mistreated.

Do not recharge, disassemble, or dispose of

in fire.

Fuse (10A)

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:Left

Cleaning the connectors

The unit may not function properly if the connectors

between the unit and the front panel are not clean. In

order to prevent this, detach the front panel (page 4)

and clean the connectors with a cotton swab dipped

in alcohol. Do not apply too much force. Otherwise,

the connectors may be damaged.

Notes

• For safety, turn off the ignition before cleaning the

connectors, and remove the key from the ignition

switch.

• Never touch the connectors directly with your fingers

or with any metal device.

Removing the unit

1 Remove the protection collar.

1 Detach the front panel (page 4).

2 Engage the release keys together with the

protection collar.

3 Pull out the release keys to remove the

protection collar.

2 Remove the unit.

1Insert both release keys simultaneously

until they click.

2Pull the release keys to unseat the unit.

3Slide the unit out of the mounting.

Specifications

CD Player section

Signal-to-noise ratio: 120 dB

Frequency response: 10 – 20,000 Hz

Wow and flutter: Below measurable limit

Tuner section

Tuning range: 87.5 – 107.9 MHz

Antenna terminal: External antenna connector

Intermediate frequency: 10.7 MHz/450 kHz

Usable sensitivity: 9 dBf

Selectivity: 75 dB at 400 kHz

Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono)

Harmonic distortion at 1 kHz: 0.5 % (stereo),

0.3 % (mono)

Separation: 35 dB at 1 kHz

Frequency response: 30 – 15,000 Hz

Main unit

Back of the front

panel

Orient the release

keys as shown.

Hook facing

inwards.

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC

DISTORTION

23.2 watts per channel minimum continuous

average power into 4 ohms, 4 channels driven

from 20 Hz to 20 kHz with no more than 5% total

harmonic distortion.

CEA2006 Standard

Power Output: 17 Watts RMS × 4 at

4 Ohms < 1% THD+N

SN Ratio: 82 dBA

(reference: 1 Watt into 4 Ohms)

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:RightH:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:Right

Tuning range: 530 – 1,710 kHz

Antenna terminal: External antenna connector

Intermediate frequency: 10.7 MHz/450 kHz

Sensitivity: 30 µV

Power amplifier section

Outputs: Speaker outputs (sure seal connectors)

Speaker impedance: 4 – 8 ohms

Maximum power output: 52 W × 4 (at 4 ohms)

General

Outputs:

Audio outputs terminal (front/rear)

Subwoofer output terminal (mono)

Power antenna relay control terminal

Power amplifier control terminal

Inputs:

Telephone ATT control terminal

Illumination control terminal

BUS control input terminal

BUS audio input/AUX IN terminal

Remote controller input terminal

Antenna input terminal

Tone controls:

Bass: ±10 dB at 62 Hz

Treble: ±10 dB at 16 kHz

Loudness:

+8 dB at 100 Hz

+2 dB at 10 kHz

Power requirements: 12 V DC car battery

(negative ground)

Dimensions: Approx. 178 × 50 × 188 mm (7

/8 × 2 ×

/2 in) (w/h/d)

Mounting dimensions: Approx. 182 × 53 × 162 mm

/4 × 2

/8 × 6

/2 in) (w/h/d)

Mass: Approx. 1.6 kg (3 lb 9 oz)

Supplied accessories:

Card remote commander: RM-X143A

Parts for installation and connections (1 set)

Front panel case (1)

Optional accessories/equipment:

Rotary commander: RM-X6S

BUS cable (supplied with an RCA pin cord):

RC-61 (1 m), RC-62 (2 m)

CD changer (10 discs): CDX-757MX

CD changer (6 discs): CDX-T69

MD changer (6 discs): MDX-66XLP

Source selector: XA-C30

AUX-IN selector: XA-300

Note

This unit cannot be connected to a digital preamplifier

or an equalizer which is Sony BUS system compatible.

Design and specifications are subject to change

without notice.

Troubleshooting

The following checklist will help you remedy

problems you may encounter with your unit.

Before going through the checklist below, check the

connection and operating procedures.

US and foreign patents licensed from Dolby

Laboratories.

General

No power is being supplied to the unit.

• Check the connection. If everything is in order, check

the fuse.

• If the unit is turned off and the display disappears, it

cannot be operated with the remote commander.

t Turn on the unit.

The power antenna does not extend.

The power antenna does not have a relay box.

No sound.

• The volume is too low.

• The ATT function is activated, or the Telephone ATT

function (when the interface cable of a car telephone

is connected to the ATT lead) is activated.

• The position of the fader control (FAD) is not set for

a 2-speaker system.

• The CD changer is incompatible with the disc format

(MP3/ATRAC CD).

t Play back with a Sony MP3 compatible CD

changer, or this unit.

No beep sound.

• The beep sound is canceled (page 11).

• An optional power amplifier is connected and you are

not using the built-in amplifier.

The contents of the memory have been erased.

• The RESET button has been pressed.

t Store again into the memory.

• The power connecting lead or battery has been

disconnected.

• The power connecting lead is not connected properly.

Stored stations and correct time are erased.

The fuse has blown.

Makes noise when the position of the ignition

key is switched.

The leads are not matched correctly with the car’s

accessory power connector.

continue to next page t

• Lead-free solder is used for soldering certain

parts. (more than 80 %)

• Halogenated flame retardants are not used in the

certain printed wiring boards.

• Halogenated flame retardants are not used in

cabinets.

• VOC (Volatile Organic Compound)-free vegetable

oil based ink is used for printing the carton.

• Packaging cushions do not use polystyrene foam.

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:Left

Error displays/Messages

The display disappears from/does not appear

in the display window.

• The dimmer is set “Dimmer on” (page 11).

• The angle of the front panel is not proper.

tAdjust the angle of the front panel by pressing

and hold (ANGLE) (page 6).

• The display disappears if you press and hold (OFF).

tPress and hold (OFF) again until the display

appears.

• The connectors are dirty (page 16).

DSO does not function.

Depending on the type of car interior or type of music,

DSO may not have a desirable effect.

The images change automatically.

In Auto Image mode, the selected image cannot be

displayed.

t To display selected image only, set to “A.IMG off”

(page 11).

Any display items do not display.

t Set to “Info on” (page 11).

CD/MD playback

The disc cannot be loaded.

• Another disc is already loaded.

• The disc has been forcibly inserted upside down or in

the wrong way.

The disc does not playback.

• Defective or dirty disc.

• The CD-Rs/CD-RWs are not for audio use (page 14).

MP3 files cannot be played back.

The disc is incompatible with the MP3 format and

version (page 14).

MP3 files take longer to play back than others.

The following discs take a longer time to start

playback.

– a disc recorded with a complicated tree structure.

– a disc recorded in Multi Session.

– a disc to which data can be added.

The ATRAC CD cannot play.

• The disc is not created by authorized software, such

as SonicStage or SonicStage Simple Burner.

• Tracks that are not included in the group cannot be

played.

The display items do not scroll.

• For discs with very many characters, those may not

scroll.

• “A.Scroll” is set to off.

tSet to “A.Scroll on” (page 11) or press (SCRL)

on the card remote commander.

The sound skips.

• Installation is not correct.

tInstall the unit at an angle of less than 45° in a

sturdy part of the car.

• Defective or dirty disc.

The operation buttons do not function.

The disc will not eject.

Press the RESET button (page 4).

“MS” or “MD” does not appear on the source

display when both the optional MGS-X1 and

MD changer are connected.

This unit recognizes MGS-X1 as an MD unit.

t Press (SOURCE) until “MS” or “MD” appears,

then press (MODE) repeatedly.

Radio reception

The stations cannot be received.

The sound is hampered by noises.

• Connect a power antenna control lead (blue) or

accessory power supply lead (red) to the power

supply lead of a car’s antenna booster (only when

your car has built-in FM/AM antenna in the rear/side

glass).

• Check the connection of the car antenna.

• The auto antenna will not go up.

t Check the connection of the power antenna

control lead.

• Check the frequency.

• When the DSO mode is on, the sound is sometimes

hampered by noises.

t Set the DSO mode to “off” (page 7).

Preset tuning is not possible.

• Store the correct frequency in the memory.

• The broadcast signal is too weak.

Automatic tuning is not possible.

• The local seek mode is set to “on.”

t Set to “Local off” (page 11).

• The broadcast signal is too weak.

t Perform manual tuning.

During FM reception, the “ST” indication

flashes.

• Tune in the frequency accurately.

• The broadcast signal is too weak.

t Set to “Mono on” (page 11).

An FM program broadcast in stereo is heard in

monaural.

The unit is in monaural reception mode.

t Set to “Mono off” (page 11).

Interference occurs during FM reception.

IF mode is set to “Wide.”

t Set to “IF Auto” (page 11).

Blank*

Tracks have not been recorded on the MD.*

t Play an MD with recorded tracks.

Error*

• The disc is dirty or inserted upside down.*

t Clean or insert the disc correctly.

• The disc cannot play because of some problem.

t Insert another disc.

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:RightH:\Data Disk\2586657111\258665711CDXF7815XU\01US02CD-U.fm masterpage:Right

*1 If an error occurs during playback of a CD or MD,

the disc number of the CD or MD does not appear

in the display.

*2 The disc number of the disc causing the error

appears in the display.

If these solutions do not help improve the situation,

consult your nearest Sony dealer.

If you take the unit to be repaired because of CD

playback trouble, bring the disc that was used at the

time the problem began.

Failure (Illuminates until any button is pressed.)

The connection of speakers/amplifiers is incorrect.

tSee the installation guide manual of this model to

check the connection.

FAILURE (Illuminates for about 1 second.)

When the XM tuner is connected, storing an XM radio

channel into a preset failed.

tBe sure to receive the channel that you want to

store, then try it again.

Load

The changer is loading the disc.

tWait until loading is complete.

Local Seek +/–

The local seek mode is on during automatic tuning.

NO Data

All custom names have been deleted, or none are

stored.

NO Disc

The disc is not inserted in the CD/MD changer.

tInsert discs in the changer.

NO Disc Name

A disc name is not written in the track.

NO Group Name

A group name is not written in the track.

NO ID3 Tag

ID3 tag information is not written in the MP3 file.

NO Info

Text information is not written in the ATRAC3/

ATRAC3plus file.

NO Magazine

The disc magazine is not inserted in the CD changer.

tInsert the magazine in the changer.

NO Music

The disc is not a music file.

tInsert a music CD in this unit or MP3 playable

changer.

NO Track Name

A track name is not written in the track.

Not Read

The disc information has not been read by the unit.

tLoading the disc, then select it on the list.

Not Ready

The lid of the MD changer is open or the MDs are not

inserted properly.

tClose the lid or insert the MDs properly.

Offset

There may be an internal malfunction.

tCheck the connection. If the error indication

remains on in the display, consult your nearest

Sony dealer.

Read

The unit is reading all track and group information on

the disc.

tWait until reading is complete and playback starts

automatically. Depending on the disc structure, it

may take more than a minute.

Push Reset

The CD unit and CD/MD changer cannot be operated

because of some problem.

tPress the RESET button (page 4).

“” or “”

During fast-forward or reverse, you have reached the

beginning or the end of the disc and you cannot go any

further.

“s”

The character cannot be displayed with the unit.

CDX-M7815X/M7810

2-586-657-11 (1)

H:\Data Disk\2586657111\258665711CDXF7815XU\02FR01INT-U.fm masterpage:Left

Félicitations !

Nous vous remercions d’avoir fait l’acquisition

de ce lecteur de disques compacts Sony. Ce

lecteur vous offre les fonctions suivantes.

• Lecture de CD

Possibilité de lecture de CD-DA (contenant

également des informations CD TEXT*), de

CD-R/CD-RW (fichiers MP3 contenant

également des multisessions (page 15)) et de

CD ATRAC (format ATRAC3 et ATRAC3plus

(page 16)).

• Réception radio

– Vous pouvez mémoriser jusqu’à 6 stations par

bande de fréquences (FM1, FM2, FM3, AM1

et AM2).

–BTM (mémorisation des meilleurs accords) :

l’appareil sélectionne des stations émettant un

signal fort et les mémorise.

–Vous pouvez affecter un nom à chaque station

radio, l’enregistrer dans la mémoire et

afficher les noms de stations dans la liste.

• Réglages du son

–EQ7 : vous pouvez choisir une courbe

d’égaliseur pour 7 types de musique.

–DSO (Dynamic Soundstage Organizer) :

création d’un son mieux réparti, à l’aide d’un

haut-parleur virtuel, afin de renforcer le son

des haut-parleurs, même s’ils sont installés

dans la partie inférieure de la portière.

–BBE MP : amélioration des sons compressés

numériquement comme les fichiers MP3.

Pour plus de détails, reportez-vous à

l’explication suivante.

• Réglage de l’image

Vous pouvez régler divers motifs d’affichage

sur l’appareil.

– Mode Space Producer : crée des motifs animés

sur l’écran sur le rythme de la musique.

• Pilotage d’appareils en option

En plus de la fonction de lecture, cet appareil

vous permet également de piloter des

changeurs CD/MD en option ou des appareils

portables Sony en option.

* Un disque CD TEXT est un CD-DA contenant des

informations telles que le nom du disque, le nom de

l’artiste et le nom des plages.

L’appellation et le logo SonicStage sont des

marques de commerce de Sony Corporation.

ATRAC, ATRAC3, ATRAC3plus et leurs logos

sont des marques de commerce de Sony

Corporation.

Type de

disques

Symbole indiqué sur le

disque

CD-DA

MP3

CD ATRAC

L’utilisation d’instruments optiques avec ce

produit augmente les risques pour les yeux.

ATTENTION

Avertissement si le contact de votre

véhicule ne comporte pas de position

ACC

Après avoir coupé le moteur, n’oubliez pas de

maintenir la touche (OFF) enfoncée sur

l’appareil jusqu’à ce que l’affichage

disparaisse.

Sinon, l’affichage n’est pas désactivé et la

batterie du véhicule se décharge.

Le processus BBE MP

améliore le son compressé

numériquement, tel qu

’

MP3, en restaurant et en améliorant les

harmoniques supérieures perdues lors de la

compression. BBE MP génère des harmoniques

paires depuis le matériel source, récupérant

efficacement la chaleur, les détails et les

nuances.

Le logo « XM Ready » indique que ce

produit permet de contrôler un module

de syntonisation XM (vendu

séparément). Veuillez consulter votre

détaillant agréé Sony pour plus de détails

sur les modules de syntonisation XM.

La page charge ...

Sony CDX M7810 Manuel utilisateur

Marque: Sony

Modèle: CDX M7810

Catégorie: Récepteurs multimédia de voiture

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Sony CDX M7810 User manual
español: Sony CDX M7810 Manual de usuario

Sony CDX M7810 Manuel utilisateur

Ce manuel convient également à

Sony CDX M7810 Manuel utilisateur

dans d''autres langues

Documents connexes