All-Power APG3304 Le manuel du propriétaire

www.allpoweramerica.com

HAVE QUESTIONS OR NEED SERVICE

DO NOT RETURN TO STORE!

866.882.8088

T M

APG3304

Owner’s Manual

9000W Generator

For safe operation, read and understand

Owner’s Manual prior to use.

9000W Generator

Topic Page

Limited Warranty 3

Safety Guidelines 5

General Precautions 6

Battery 15

Assembly 16

Operation 19

Inspection, Cleaning and Maintenance 24

Installation 25

Compliance 27

Speci fications 28

Trouble Shooting 29

WARNING! READ AND UNDERSTAND ALL SAFETY PRECAUTIONS

IN THIS MANUAL BEFORE OPERATING. FAILURE TO COMPLY WITH

INSTRUCTIONS IN THIS MANUAL COULD RESULT IN PERSONAL

INJURY, PROPERTY DAMAGE, AND/ OR VOIDING OF YOUR

WARRANTY. ALL POWER AMERICA WILL NOT BE LIABLE FOR ANY

DAMAGE BECAUSE OF FAILURE TO FOLLOW THESE INSTRUCTIONS.

Wiring Diagram 30

General Parts Listing 31

2

3

Owner’s Manual

Limited Warranty

All-Power America warrants to the original purchaser who uses the product in a consumer

application (personal, residential or household usage) that all products covered under this

warranty are free from defects in material and workmanship for one year from the date of

purchase. All products covered by this limited warranty which are used in commercial applications

(i.e. income producing) are warranted to be free of defects in material and workmanship for

90 days from the date of original purchase. Products covered under this warranty include air

compressors, air tools, service parts, pressure washers and generators.

All-Power America will repair or replace, at All-Power America’s sole option, products or

components which have failed within the warranty period. Service will be schelduled according

to the normal work flow and business hours at the service center location, and the availibility of

replacement parts. All decisions of All-Power America with regard to this limited warranty shall be

final.

This warranty gives you specifi c legal rights, and you may also have other rights which vary from

state to state.

RESPONSIBILITY OF ORIGINAL PURCHASER (initial User):

To process a warranty claim on this product, DO NOT return item to the retailer. The product must

be evaluated by an Authorized Warranty Service Center. For the location of the nearest Authorized

Warranty Service Center contact the retailer or place of purchase.

Retain original cash register sales receipt as proof of purchase for warranty to work.

Use reasonable care in the operation and maintenance of the product as described in the Owner’s

Manual(s).

Deliver or ship the product to the Authorized Warranty Service Center. Freight costs, if any must

be paid by the purchaser.

If the purchaser does not receive satisfactory results form the Authorized Warranty Sercive

Center, the purchser should contact All-Power America.

4

9000W Generator

Limited Warranty (cont’d)

THIS WARRANTY DOES NOT COVER:

• Merchandise sold as reconditioned, used as rental equipment, or floor or display models.

• Merchandise that has become damaged or inoperative because of ordinary wear, misuse,

cold, heat, rain, excessive humidity, freeze damage, use of improper chemicals, negligence,

accident, failure to operate the product in accordance with the instructions provided in the

Owner’s Manual(s) supplied with the product, improper maintenance, the use of accessories or

attachments not recommended by All-Power America, or unauthorized repair or alterations.

• Repair and transportation costs of merchandise determine not to be defective.

• Costs assoiciated with assembly, required oil, adjustments or other installation and start-up

costs.

• Expendable parts or accessories supplied with the product which are expected to become

inoperative or unusable after a reasonable period of use.

• Merchandise sold by All-Power America which has been manufactured by and identi ? ed as the

product of another company, such as gasoline engines. The product manufacturer’s warranty, if

any, will apply.

• ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT

MAY RESULT FROM ANY DEFECTS, FAILURE OR MALFUNCTION OF THE PRODUCT IS

NOT COVERED BY THIS WARRANTY. Some states do not allow the exclusion, so it may not

apply to you.

• IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR

A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR FROM THE DATE OF ORIGINAL

PURCHASE. Some states do not allow limitations on how long an implied warranty lasts, so the

above limitations may not apply to you.

5

Owner’s Manual

Safety Guidelines - Definitions

This manual contains important information that you need to know and

understand in order to protect YOUR SAFETY and to PREVENT

EQUIPMENT PROBLEMS. The following symbols help you recognize this

information. Please read the manual and pay attention to these sections.

Save These Important Safety Instructions!

Read and understand all of these safety instructions. Be

sure to retain them for future use.

WARNING! WARNINGS INDICATE A CERTAINTY OR STRONG

POSSIBILITY OF PERSONAL INJURY OR DEATH IF

INSTRUCTIONS ARE NOT FOLLOWED.

CAUTION: CAUTIONS INDICATE A POSSIBILITY OF

EQUIPMENT DAMAGE IF INSTRUCTIONS ARE NOT

FOLLOWED.

NOTE: NOTES GIVE HELPFUL INFORMATION

WARNING! IMPROPER OPERATION OR MAINTENANCE

OF THIS PRODUCT COULD RESULT IN SERIOUS INJURY

AND PROPERTY DAMAGE. READ AND UNDERSTAND ALL

WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING

THIS EQUIPMENT. WHEN USING AIR TOOLS, BASIC SAFETY

PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE

THE RISK OF PERSONAL INJURY.

6

9000W Generator

Gasoline and Oil

This product requires oil and fuel. Attempting to start the engine without oil will ruin

the engine and void the warranty. Work in well ventilated area. Keep cigarettes,

flames or sparks away from the work area or where gasoline is stored.

WARNING! GASOLINE IS EXTREMELY FLAMMABLE AND IS EXPLOSIVE

UNDER CERTAIN CONDITIONS. KEEP OUT OF REACH OF CHILDREN.

• Gasoline fuel and fumes are flammable and potentially explosive. Use proper fuel storage and

handling procedures. Always have multiple ABC class fire extinguishers nearby.

• Keep the generator and surrounding area clean at all times.

• Fuel or oil spills must be cleaned up immediately. Dispose of fluids and cleaning materials as per

any local, state, or federal codes and regulations. Store oily rags in a covered metal container.

• Never store fuel or other flammable materials near the generator.

General Precautions

WARNING! FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN

SEVERE INJURY OR DEATH.

DANGER

Carbon Monoxide

Generator exhaust contains high levels of carbon monoxide (CO), a poisonous gas you cannot see

or smell. If you can smell the generator exhaust, you are breathing CO. But even If you cannot smell

the exhaust, you could be breathing CO.

· NEVER use a generator inside homes, garages, crawlspaces, or other partly enclosed areas. Deadly

levels of carbon monoxide can build up in these areas. Using a fan or opening windows and doors

does NOT supply enough fresh air.

· ONLY use a generator outdoors and far away from open windows, doors, and vents. These

openings can pull in generator exhaust.

Even when you use a generator correctly, CO may leak into the home. ALWAYS use a

battery-powered or battery-backup CO alarm in the home.

If you start to feel sick, dizzy, or weak after the generator has been running, move to fresh air RIGHT

AWAY. See a doctor. You could have carbon monoxide poisoning.

Using a generator indoors WILL KILL YOU IN MINUTES.

Owner’s Manual

7

General Precautions (cont’d)

Gasoline and Oil (cont’d)

• Do not smoke, or allow sparks, flames or other sources of ignition around the engine and fuel

tank. Fuel vapors are explosive.

• Keep grounded conductive objects, such as tools, away from exposed, live electrical parts and

connections to avoid sparking or arcing. These events could ignite fumes or vapors.

• Do not refill the fuel tank while the engine is running or while the engine is still hot. Do not

operate the generator with known leaks in the fuel system

• Excessive buildup of unburned fuel gases in the exhaust system can create a potentially

explosive condition. This buildup can occur after repeated failed start attempts, valve testing, or

hot engine shutdown. If this occurs, open exhaust system drain plugs, if equipped, and allow the

gases to dissipate before attempting to restart the generator.

• Use only engine manufacturer recommended fuel and oil.

Hot Components

WARNING! ENGINE AND EXHAUST SYSTEM PARTS BECOME VERY

HOT AND REMAIN HOT FOR SOME TIME AFTER THE ENGINE IS RUN. WEAR

INSULATED GLOVES OR WAIT UNTIL THE ENGINE AND EXHAUST SYSTEM

HAVE COOLED BEFORE HANDLING THESE PARTS.

Power Output

This generator is not designed to power sensitive electronic equipment (including computers

and medical devices) without the addition of an approved line conditioner, which is sold separately.

CAUTION: ATTEMPTING TO POWER SENSITIVE ELECTRONIC EQUIPMENT

WITHOUT THE USE OF AN APPROVED LINE CONDITIONER MAY CAUSE

DAMAGE TO THE EQUIPMENT. ALL POWER AMERICA IS NOT RESPONSIBLE

FOR ANY DIRECT OR INDIRECT DAMAGE CAUSED BY FAILURE TO USE AN

APPROVED LINE CONDITIONER.

8

9000W Generator

General Precautions (cont’d)

Work Area

• Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

• Do not operate power tools in explosive atmospheres, such as in the presence of flammable

liquids, gases, or dust. Generators create sparks which may ignite the dust or fumes.

• Keep bystanders, children, and visitors away while operating a generator. Provide barriers or

shields as needed.

Electrical Safety

• Grounded tools must be plugged into an outlet properly installed and

grounded in accordance with all codes and ordinances. Never remove the

grounding prong or modify the plug in any way. Do not use any adapter

plugs.

• Grounding provides a low-resistance path to carry electricity away from the

user in the event of an electrical malfunction.

• Double insulated tools are equipped with a polarized plug where one blade is wider than the

other. This plug fits in a polarized outlet only one way. If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet.

Do not change the plug in any way. Double insulation eliminates the need for the three-wire

grounded power cord and grounded power supply system.

• Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.

There is an increased risk of electric shock if your body is grounded.

• Do not expose generator to rain or wet conditions. Water entering a generator will increase the

risk of electric shock.

• Do not abuse the power cord. Keep power cords away from heat, oil, sharp edges, or moving

parts. Replace damaged power cords immediately. Damaged power cords increase the risk of

electric shock.

• When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”.

These extension cords are rated for outdoor use, and reduce the risk of electric shock.

9

Owner’s Manual

General Precautions (cont’d)

Electrical Safety (cont’d)

• All connections and conduits from the generator to the load must only be installed by trained and

licensed electricians, and in compliance with all relevant local, state, and federal electrical

codes and standards, and other regulations where applicable.

• The generator must be earth-grounded for fixed installations in accordance with all relevant

electrical codes and standards before operation.

• Do not attempt to connect or disconnect load connections while standing in water, or on wet or

soggy ground.

• Do not touch electrically energized parts of the generator and interconnecting cables or

conductors with any part of the body, or with any non-insulated conductive object.

• Connect the generator only to a load or electrical system (120 volt) that is compatible with the

electrical characteristics and rated capacities of the generator.

• Before servicing equipment powered by the generator, disconnect the equipment from its power

input.

• Keep all electrical equipment clean and dry. Replace any wiring where the insulation is cracked,

cut abraded or otherwise degraded. Replace terminals that are worn, discolored, or corroded.

Keep terminals clean and tight.

• Insulate all connections and disconnected wires.

• Guard against electric shock. Prevent body contact with grounded surfaces such as pipes,

radiators, ranges, and refrigerator enclosures.

Personal Safety

• Stay alert. Watch what you are doing, and use common sense when operating a generator. Do

not use generator while tired or under the influence of drugs, alcohol, or medication. A moment

of inattention while operating generators may result in serious personal injury.

• Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing,

and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in

moving parts.

9000W Generator

General Precautions (cont’d)

Personal Safety (cont’d)

• Avoid accidental starting. Make sure the power switch is in its “OFF” position, and disconnect

the spark plug wire when not in use.

• Remove adjusting keys or wrenches before turning the generator on. A wrench or a key that is

left attached to a rotating part of the generator may result in personal injury.

• Do not overreach. Keep proper footing and balance at all times.

• Use safety equipment. Always wear eye protection. Wear ANSI approved safety impact eye

goggles. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for

appropriate conditions.

• Do not force the generator. Use the correct generator for your application. The correct generator

will do the job better and safer at the rate for which it is designed.

• Do not use the generator if the power switch does not turn it on or off. Any generator that cannot

be controlled with the power switch is dangerous and must be replaced.

Generator Use and Care

Make sure the power switch is in its “OFF” position and disconnect the spark plug wire before

making any adjustment, changing accessories, or storing the generator. Such preventive safety

measures reduce the risk of starting the generator accidentally.

Store idle generators out of reach of children and other untrained persons. Generators are

dangerous in the hands of untrained users.

Maintain generators with care. Do not use damaged generator. Tag damaged generators “Do not

use” until repaired.

Check for misalignment or binding of moving parts, breakage of parts, and any other condition that

may affect the generator’s operation. If damaged, have the generator serviced before using. Many

accidents are caused by poorly maintained generators.

Use only accessories that are recommended by the manufacturer for your model. Accessories that

may be suitable for one generator may become hazardous when used on another generator.

10

Owner’s Manual

General Precautions (cont’d)

Servicing

Maintain labels and name plates on the generator and engine. These carry important information.

If unreadable or missing, contact All Power America immediately for a replacement.

Generator service must be performed only qualified repair personnel. Service or maintenance

performed by unqualified personnel could result in a risk of injury.

When servicing a generator, use only identical replacement parts. Follow all appropriate

instructions in this manual. Use of unauthorized parts or failure to follow maintenance instructions

may create a risk of electric shock or injury.

Heart Pacemakers

WARNING! PEOPLE WITH PACEMAKERS SHOULD CONSULT THEIR

PHYSICIAN(S) BEFORE USING THIS PRODUCT. ELECTROMAGNETIC

FIELDS IN CLOSE PROXIMITY TO A HEART PACEMAKER COULD CAUSE

INTERFERENCE TO OR FAILURE OF THE PACEMAKER.

Installation

• Ensure installation meets all applicable safety, and local and national electrical codes. Have

installation performed by a qualified, licensed electrician and building contractor.

• All electrical work, including the earth-ground connection, should be completed by a licensed

electrician.

• Any separate fuel storage or generator supply facility must be built or installed in full compliance

with all relevant local, state, and federal regulations.

• It is recommended to use the generator only in well ventilated outdoor areas. A running

gasoline engine will generate carbon monoxide, a colorless, odorless gas that, if inhaled, can

cause serious injury or death.

11

12

9000W Generator

General Precautions (cont’d)

Installation (cont’d)

• If the generator is installed outdoors, it must be weatherproofed and should be soundproofed. It

should not be run outdoors without protection to the generator and wiring conduit.

• The generator weighs 238 lbs/108 kg (approx). Two or more people should assist when moving

or lifting this product. Never lift the generator using the engine or alternator lifting lugs. Connect

lifting equipment to the frame of the generator.

• Before lifting the generator, ensure the lift rigging and supporting structure are in good

condition, and are rated to lift such a load.

• Keep all personnel away from the suspended generator during relocating.

• The supporting floor/ground surface should be level and strong enough to safely hold the weight

of the generator. If the floor/grounded surface is not level, strong cross members should be

placed under the full length of the generator frame at its low side.

• For trailer installation, the generator should be mounted on the center point of the trailer, over

the wheels. The trailer must be capable of supporting the weight of the generator and all

contents (tools, etc.)

• Install sound-and weather-proofing only when it is not raining or snowing to avoid trapping

moisture within the generator’s area.

Mechanical

• Always make sure the power switch is in its “OFF” position. Disconnect the spark plug wire, and

allow the engine to completely cool before carrying out maintenance.

• Check for damaged parts. Before using the generator, any part that appears damaged should

be carefully checked to determine that it will operate properly and perform its intended function.

Check for alignment and binding of moving parts, any broken parts or mounting fixtures, and any

other condition that may affect proper operation technician.

• The generator is designed with guards for protection from moving parts. In any case, care must

still be taken to protect personnel and equipment from other mechanical hazards when working

around the generator.

Owner’s Manual

General Precautions (cont’d)

Mechanical (cont’d)

• Do not operate the generator with safety guards removed. While the generator is running, do not

attempt to reach around the safety guard for maintenance or any other reason.

• Keep hands, arms, long hair, loose clothing, and jewelry away from moving parts. Be aware that

when engine parts are moving fast they cannot be seen clearly.

• Keep access doors on enclosures closed and locked when access is not required.

• When working on or around the generator always wear protective clothing including ANSI

approved safety gloves, safety eye goggles, and safety hat.

• Do not alter or adjust any part of the generator that is assembled and supplied by the

manufacturer.

• Always follow and complete scheduled engine and generator maintenance.

Chemicals

• Avoid contact with hot fuel, oil, exhaust fumes, and hot solid surfaces.

• Avoid body contact with fuels, oils, and lubricants used in the generator. If swallowed, seek

medical treatment immediately. Do not induce vomiting if fuel is swallowed. For skin contact,

immediately wash with soap and water. For eye contact, immediately flush eyes with clean water

and seek medical attention.

Noise

• Prolonged exposure to noise levels above 68 DBA is hazardous to hearing. Always wear ANSI

approved ear protection when operating or working around the generator when it is running.

13

9000W Generator

General Precautions (cont’d)

Extension Cord

If an extension cord (not included) is used, make sure to use only UL approved cords having the

correct gauge and length according to the following table:

Nameplate Amps (@ Cord Lengths

full load)

0 - 5

16 16 12 12

5.1 - 8

16 14 10 -

8.1 - 12

14 12 - -

12.1 - 15

12 10 - -

15 - 20

10 10 - -

14

0 ft.- 50 ft. 50 ft.-100 ft. 100 ft.-150 ft. 150 ft.-200 ft.

AWG

AWG AWG

AWG

Owner’s Manual

15

Battery Installation

1. Put the battery on the battery frame (Note: the pole faces inside the frame).

2. Hang one end of the tie rod in the holes both sides of the battery, then screw the other end

through the holes of fixing board.

3. Keep the fixing board to the edge of opposite side of poles.

4. Spin the nut on the tie rod and reinforce it.

5. Connect the anode wire on the anode pole and cover the red rubber lagging on the anode

pole. Connect the negative wire on the negative pole and cover the black rubber lagging on

the negative pole.

Retaining Frame

Battery (with a rating of 12V-9AH)

Battery Assembly Breakdown

9000W Generator

16

Assembly

Unpacking

1. Remove the generator and loose parts box from the carton.

2. Compare the loose parts with the inventory list below.

Wheel Assembly

Perform the following tasks to install the heavy-duty wheels onto the generator assembly.

1. Insert axle through brackets located on frame at the bottom of generator.

2. Center axle in frame and place each wheel over each end of the axle. Then insert axle end

into the hole in the center of the wheel hub.

3. Place each large washer over the axle ends and insert axle through center of washer until

washer is fully seated against wheel hub.

4. Insert straight side of cotter pin into hole at end of the axle rod and thread the cotter pin

through the hole until pin snaps into place.

5. Repeat using the second cotter pin on the opposite end of the axle to secure the opposite

wheel to the axle assembly.

1. Wheel Axle 1

2. Heavy Duty Wheels 2

3. Large Washers 4

4. Cotter Pins 2

5. Front Stand-Off Support V-Leg 1

6. Support V-Leg Mounting Screws 2

7. Handle 1

8. Handle Mounting Bracket 1

9. Mounting Bracket Back Plate 1

10. Hinge Bolt Mounting Nuts 3

11. Three Inch Mounting Bolts 3

Description QTY.

Owner’s Manual

17

V-Leg Support Assembly

Perform the following tasks to install the V-leg support bracket.

1. Place V-leg support with mounting holes aligned with the mounting holes in the bottom

of the frame.

2. Insert one mounting bolt completely through each mounting hole.

3. Twist mounting screws to catch the threads in the frame mounted fasteners and tighten until

support leg is secure.

Handle Assembly

Perform the following tasks to install the handle onto the generator frame.

1. Place handle mounting bracket, with handle holes mount holes configured downward, onto

side of generator frame facing away from generator assembly handle mount holes.

2 Align the bracket mounting holes with the frame mounting holes.

3. Insert one three inch mounting bolt all the way through each mounting hole of the mounting

bracket and frame.

4. Align mounting plate holes with the bolt ends protruding from inside frame and insert into

mounting holes until the mounting plate is seated.

5. Twist the mounting nuts onto each bolt and tighten securely.

6. Align handle mounting holes with mounting holes in mounting bracket.

7. Insert three inch mounting bolt completely through handle and bracket.

8. Install a mounting nut onto bolt and tighten, making sure handle can swivel.

18

Operation

NOTE: THE PARTS LISTED ABOVE ARE HELPFUL FOR LOCATING THE

CONTROLS MENTIONED BELOW.

CAUTION: PRIOR TO FIRST USING THE GENERATOR, THE ENGINE MUST BE

FILLED WITH OIL OF A HIGH QUALITY SAE 10W-30 GRADE ENGINE OIL.

TO DO SO, UNSCREW AND REMOVE THE ENGINE’S OIL DIPSTICK LOCATED

AT THE BOTTOM OF THE ENGINE CRANKCASE. FILL THE ENGINE’S

CRANKCASE UNTIL THE OIL LEVEL IS LEVEL WITH THE UPPER MARKED

LINE ON THE DIPSTICK. THEN SCREW THE DIPSTICK BACK INTO

THE OIL FILL HOLE.

Before Starting the Generator

1. Check that the engine power switch is in its

“OFF” position.

2. Before the first use, remove the fuel

tank cap and fill the fuel tank with unleaded

gasoline. When fueling, be sure that the

fuel strainer is in place. Replace the fuel

tank cap. Thereafter, check the engine’s

fuel gauge for the amount of unleaded

gasoline in the fuel tank. If necessary,

re fill the fuel tank with unleaded gasoline;

the generator must be turned off and

cooled down before refilling the fuel tank.

Fuel Switch

Fuel tank

Choke Lever

Pull Start

Control Panel

9000W Generator

19

Operation

Start The Engine

Before starting the engine, verify that the engine oil is full, gasoline is full, and air filter is in place.

Also, disconnect any load from the AC receptacle, and turn the AC circuit breaker OFF (Figure 1).

• Turn the fuel valve to the “ON” position (Figure 2).

• Place the choke lever in the “CLOSE”

position (Figure 3.)

• Turn the engine switch to the “ON”

position (Figure 4).

Owner’s Manual

Figure 1. Disconnecting electrical devices

Figure 2. Fuel Valve

Figure 4. Recoil Starting Rope

Figure 5. Putting Choke Rod to “OPEN”

Figure 3. Choke Positions

• Pull the recoil starter grip lightly

until resistance is felt, then pull hard.

Warning: Do not allow the starter grip

to snap back against the engine.

(Figure4)

• Push the choke rod to the “OPEN”

position a short distance at a time over

several seconds as the engine warms up

(Figure 5)

CAUTION! NEVER start or stop

the unit with electrical loads connected

and with the connected devices

turned on

20

Operation

Start The Engine

Before starting the engine, verify that the engine oil is full, gasoline is full, and air filter is in place.

Also, disconnect any load from the AC receptacle, and turn the AC circuit breaker OFF (Figure 1).

• Turn the fuel valve to the “ON” position (Figure 2).

• Place the choke lever in the “CLOSE”

position (Figure 3.)

• Turn the key starting the engine.

(Figure 4)

9000 Watt Generator

Figure 1. Disconnecting electrical devices

Figure 2. Fuel Valve

Figure 3. Choke Positions

• Slowly turn the key to the start

position, once the engine fires up,

release the key immediately

CAUTION:

• Take your hand off the switch

immediately after the engine starts.

• If the engine fails to start, release

the switch, wait a few seconds, then try

again. Each attempt should be as short

as possible to preserve the battery. Do

not crank the engine more than 10

seconds on any one attempt.

Batteries contain electrolyte fluid or

battery acid. Batteries emit hydrogen

gases as battery is being charged. The

slightest spark will ignite hydrogen and

cause an explosion.

NOTE: The customer is responsible for

purchasing a battery for the unit.

Recommended battery ( 28 Ah-36 Ah)

RUN

START

START SWITCH

STOP

Check to make sure the

the electrolyte level in each

cell are all between upper

and lower limits.

(1) Upper limit

(2) Lower limit

(1)

(2)

Figure 4.

La page est en cours de chargement...

All-Power APG3304 Le manuel du propriétaire

All-Power APG3304 Le manuel du propriétaire

dans d''autres langues

Autres documents