Blomberg BCHP30100SS Manuel utilisateur

www.blomberginternational.com

[email protected]

Range Hood

User manual

Hotte

Manuel d’utilisation

Campana

Manual del usuario

BCHP30100SS

Document number : 01M-8851233200-0316-04

Ths product has been manufactured n envronmental frendly modern plants wthout gvng any harm to the nature.

Please read this manual first!

Dear Customers!

Thank you for preferring a Blomberg product. We hope that you get the best results

from your product which has been manufactured with high quality and state-of-the-art

technology. Therefore, please read this entire user manual and all other accompanying

documents carefully before using the product and keep it as a reference for future use.

If you handover the product to someone else, give the user manual as well. Follow all

warnings and information in the user manual.

Remember that this user manual is also applicable for several other models. Differences

between the models are explicitly described in the manual.

Meanings of the Symbols

Following symbols are used in the various section of this manual:

C

Important information and useful hints about

usage.

A

WARNING:

Warnings for dangerous situa-

tions concerning the safety of life and property.

B

Warning for electric shock.

Warning for hot surfaces.

Range Hood / User Manual

3 / 62 EN

CONTENTS

1 Important safety and

envronmental nstructons 4

1.1 General safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.1.1 Electrcal safety. . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.1.2 Product safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1.3 Chldren's safety . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.2 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.3 Complance wth WEEE Drectve and

dsposng of the waste product. . . . . . . . . . . . . . . . .7

Complance wth RoHS Drectve: . . . . . . . . . . . . . . .7

1.4 Package nformaton . . . . . . . . . . . . . . . . . . . . . . . .7

2 Electrcal & Installaton

requrements 8

2.1 Electrcal requrements. . . . . . . . . . . . . . . . . . . . . 8

2.2 Before nstallng the hood . . . . . . . . . . . . . . . . . 8

3 Techncal specfıcatons of your

applance 9

3.1 Lst of Materals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3.1.1 Parts suppled . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3.1.2 Parts not suppled . . . . . . . . . . . . . . . . . . . . . . . . 9

3.2 Dmensons and Clearances . . . . . . . . . . . . . . . 10

3.3 Ductng Optons and Examples. . . . . . . . . . . . 10

3.3.1 Ventng methods. . . . . . . . . . . . . . . . . . . . . . . . 10

3.4 Preparaton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

4 Installng your applance 12

4.1 Installaton - Ductng verson. . . . . . . . . . . . . . 12

4.2 İnstall hood onto wall . . . . . . . . . . . . . . . . . . . . . 12

4.2.1 Install Transton Onto Top of Hood. . . . . 12

4.2.2 Hang hood on wood support. . . . . . . . . . . . 13

4.2.3 Install bottom mountng screws . . . . . . . . 13

4.3 İnstall hood celng or beneath cabnets . . 13

4.3.1 Install Transton Onto Top of Hood. . . . . 14

4.3 2 Mount hood onto celng or cabnet . . . . . 14

4.3.3 Connectng the ductwork . . . . . . . . . . . . . . . 15

4.3.4 Electrcal connecton. . . . . . . . . . . . . . . . . . . . 15

4.3.5 Install Motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

5 Operatng your applance 17

5.1 Descrpton of the hood & Controls . . . . . . . 17

5.1.1 Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

5.1.2 Descrpton of control panel. . . . . . . . . . . . . 17

6 Cleanng and mantenance 18

6.1 Mantenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

6.2 Cleanng. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

6.3 Grease Flter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

6.3.1 Remove grease flters. . . . . . . . . . . . . . . . . . . 18

6.3.2 İnstall grease flters . . . . . . . . . . . . . . . . . . . . . 18

6.4 Replacng the lght bulb. . . . . . . . . . . . . . . . . . . 18

7 Warranty 20

4 / 62 EN

Range Hood / User Manual

1

Important safety and envronmental

nstructons

This section contains safety

instructions that will help protect

from risk of personal injury or

property damage. Failure to follow

these instructions invalidates the

granted warranty.

1.1 General safety

•Always have the installation and

repairing procedures carried out

by the Authorized Service Agent.

Manufacturing firm shall not be

held responsible for damages that

may be caused by unauthorized

persons.

•This appliance is not intended

for use by persons (including

children) with reduced physical,

sensory or mental capabilities, or

lack of experience and knowledge.

Children should be supervised to

ensure that they do not play with

the appliance.

1.1.1 Electrical safety

•Always unplug the appliance

from the mains supply during

installation, maintenance,

cleaning and repair operations.

•If the power cable is faulty,

it should be replaced by a

qualified person certified by

the manufacturer, after-sales

service or similar (preferably an

electrician) or a person described

by the importer.

•Operating voltage is 220 to 240

volts.

•If the appliance has a failure, it

should not be operated unless it is

repaired by the Authorized Service

Agent. There is the risk of electric

shock!

•Do not route power cable close

to hobs. Otherwise power cable

may cause fire since it melts down

easily.

•Never plug the hood before

installation is completed.

•In order to obtain the best

performance, external conductor

must not be longer than 4 m. It

must not contain more than 2

perpendicular (90°) angles and its

diameter must be min. ø120 mm.

•Disconnect the appliance from

mains before any intervention to

the internal parts of the appliance.

•Use the appliance with a grounded

outlet only.

Range Hood / User Manual

5 / 62 EN

1

Important safety and envronmental

nstructons

1.1.2 Product safety

•You can use a ppe wth a dameter

of 120 mm or 150 mm on the flue

connecton of the hood.

•Do not make connections to the

flues connected with stoves,

exhaust shafts or flues with rising

flames. Observe the rules set by

authorities on the discharge of

exhaust air.

•The height between the lower

surface of the hood and upper

surface of the stove/oven should

not be less than 50 cm for gas

hobs and 45 cm for electric hobs.

•Do not operate the hood without

aluminum filters and do not

remove the filters while it is

operated.

•Never touch the hood's lamps

after they are operated for a long

time. Hot lamps may burn your

hand.

•Avoid large flames beneath the

product. Otherwise, particles on

oil filter may ignite and lead to a

fire.

•Turn on the hobs after placing

pans or pots on it. Otherwise,

rising heat may deform certain

parts of your product.

•Turn off the hobs before taking

away pans or pots.

•Avoid inflammable materials under

the hood.

•Oil may ignite while frying foods.

Therefore, be careful about cloths

and curtains.

•Never leave the cooker unattended

when frying foods; otherwise hot

oil may cause fire.

•There is the risk of fire if your hood

is not cleaned in the specified

periods.

•Be extremely careful and wear

gloves when cleaning the hood.

•We advise you to operate the

appliance a few minutes before

starting to cook in order to

increase the suction power. Thus,

you shall have a continuous and

stable suction power when the

vapors arise.

•Operate your hood for 15 minutes

more after the end of cooking or

frying in order to remove the smell

and cooking vapor in the kitchen.

•When the hood is in use, especially

together with gas cookers,

make sure that environment is

ventilated with clean air.

6 / 62 EN

Range Hood / User Manual

•Pay attention not to connect

the appliance to the flues used

by non-electrical devices. (E.g.:

Heater flue).

•Simultaneous and smooth

operation of the hood and another

device that require air is only

possible when a low pressure

of 4 Pa (0.04 mbar) is reached,

and thus the reabsorption of the

gas is avoided. This can only be

achieved by means of air coming

from uncovered openings (door,

window, ventilation openings

or other technical measures).

Pay utmost attention to provide

sufficient air flow. A flue that

provides air ingress/egress is not

enough for this purpose.

1.1.3 Children's safety

•Packaging materials are dangerous

to children. Keep packaging

materials in a safe place out of

reach of children.

•Electrical appliances are

dangerous to children. Keep

children away from the product.

Do not allow children play with the

appliance.

•This appliance can be used by the

children who are at the age of 8 or

over and by the people who have

limited physical, sensory or mental

capacity or who do not have

knowledge and experience, as

long as they are supervised with

regard to safe use of the product

or they are instructed accordingly

and understand the risks of using

the product. Children should not

play with the appliance.

•

CAUTION:

Accessible parts may

heat up when used with a cooking

device.

1.2 Intended use

•This appliance is intended for

domestic use. It is not suitable for

commercial use and it must not be

used out of its intended use.

•The manufacturer shall not be

liable for any damage caused by

improper use or handling.

•Service life of your appliance is 10

years. This is the period required

for availability of spare parts for

proper functioning of the product.

1

Important safety and envronmental

nstructons

Range Hood / User Manual

7 / 62 EN

•

WARNING:

Failure to fix the

screws in concordance with

the instructions provided in the

manual may lead to electrical

hazards.

1.3 Compliance with WEEE

Directive and disposing of the

waste product

This product complies with EU WEEE

Directive (2012/19/EU). This product

bears a classification symbol for waste

electrical and electronic equipment

(WEEE).

This product has been manufactured with high

quality parts and materials which can be reused

and are suitable for recycling. Do not dispose of

the waste product with normal domestic and other

wastes at the end of its service life. Take it to the

collection center for the recycling of electrical and

electronic equipment. Please consult your local

authorities to learn about these collection centers.

Compliance with RoHS

Directive:

The product you have purchased complies with EU

RoHS Directive (2011/65/EU). It does not contain

harmful and prohibited materials specified in the

Directive.

1.4 Package information

Package of the product is made of

recyclable materials in accordance with

our National Legislation. Do not dispose

of the packaging materials together with the

domestic or other wastes. Take them to the

packaging material collection points designated by

the local authorities.

1

Important safety and envronmental

nstructons

8 / 62 EN

Range Hood / User Manual

2 Electrcal & Installaton requrements

2.1 Electrical requirements

C

Observe all governing codes and

ordinances.

It is the customer’s responsibility:

To contact a qualified electrical installer. To assure

that the electrical installation is adequate and in

conformance with National Electrical Code, ANSI/

NFPA 70 — latest edition*, or CSA Standards C22.1-

94, Canadian Electrical Code, Part 1 and C22.2

No.0-M91 - latest edition** and all local codes and

ordinances.

• If codes permit and a separate ground wire

is used, it is recommended that a qualified

electrician determine that the ground path is

adequate.

• Do not ground to a gas pipe.

• Check with a qualified electrician if you are not

sure range hood is properly grounded.

• Do not have a fuse in the neutral or ground

circuit.

C

Save Installation Instructions for

electrical inspector’s use.

C

The range hood must be connected

with copper wire only.

C

The range hood should be connected

directly to the fused disconnect (Or

circuit breaker) box through metal

electrical conduit.

Wire sizes must conform to the requirements of

the National Electrical Code ANSI/NFPA 70 — latest

edition*, or CSA Standards C22.1-94, Canadian

Electrical Code Part 1 and C22.2 No. 0-M91 - latest

edition** and all local codes and ordinances.

A U.L.- or C.S.A.-listed conduit connector must be

provided at each end of the power supply conduit

(at the range hood and at the junction box).

Copies of the standards listed may be obtained

from:

* National Fire Protection Association

Batterymarch Park Quincy, Massachusetts 02269

** CSA International 8501 East Pleasant Valley

Road Cleveland, Ohio 44131-5575

2.2 Before installing the hood

1. For the most efficient air flow exhaust, use a

straight run or as few elbows as possible.

A

WARNING:

Vent unit to outside

of building, only.

2. At least two people are necessary for

installation.

3. Fittings material is provided to secure the

hood to most types of walls/ceilings, consult

a Qualified Installer, check if they perfectly fit

with your cabinet/wall.

4. Do not use flex ducting.

5. COLD WEATHER installations should have an

additionalbackdraft damper installed to mini-

mize backward cold airflow and a nonmetallic

thermal break to minimizeconduction of out-

side temperatures as part of theductwork. The

damper should be on the cold air side ofthe

thermal break.The break should be as close as

possible to where theducting enters the heated

portion of the house.

6. Make up air: Local building codes may require the

use of Make-Up Air Systems when using Ducted

Ventilation Systems greater than specified CFM

of air movement. The specified CFM varies from

locale to locale. Consult your HVAC professional

for specific requirements in your area.

Removing the packaging

A

Remove carton carefully, Wear

gloves to protect against sharp

edges.

A

WARNING:

Remove the protec-

tive film covering the product before

putting into operation.

Range Hood / User Manual

9 / 62 EN

3 Techncal specfıcatons of your applance

3.1 List of Materials

3.1.1 Parts supplied

Removing the packaging

A

Remove carton carefully, Wear

gloves to protect against sharp

edges.

A

WARNING:

Remove the protec-

tive film covering the product before

putting into operation.

• Hood canopy.

• Blower.

• Duct transition.

• Lamp already installed.

• Grease filter.

• Hardware bag with:

– Use, care and installation guide

– 2 hollow wall anchors with screws to secure

hood to the wall at the bottom

– 4 Wood screws to secure the wood support

to the wall

– 4 Phillips head screws to secure the transition

to the hood outlet on the top

– 6 Phillips head screws to secure hood to the

wood support (2 secured to wood support)

– 1 Safety screw and lock washer to secure

the blower (screw is marked with red or blue

paint)

– 2 Flat washers for wall anchors

3.1.2 Parts not supplied

Optional Accessories

• Duct Cover

• Heat Lamps kit (2 IR 175W)

• Backsplash kit

Tools/Materials required

• Wire nuts

• Tape to mount template

• 8” rounded metal duct length to suit installation

• Measuring tape

• Pliers

• Gloves

• Knife

• Safety glasses

• Electric drill with 5/16” and 3/8” Bits

• Strain relief

• Spirit level

• Duct tape

• Screwdrivers:

– Phillips (Posidrive) # 2

– Torx # 2

• Wire cutter/stripper

• Masking tape

• Hammer

• Saw, jig saw or reciprocating saw

BCHP30100SS

Operatng mode

ducted out only

Max. Ventlaton

Capacty

515 CFM

Nr.of Speeds

4

Controls

Mechancal Knobs

Lghts

2 x 50 W Halogene

Flterng

2 x Baffle Flters

Volts

120 V

Frequency

60 Hz

Total Power

(motor + lamps)

550 W

Plug type

Hard Wre

Requred ds-

tance above

cooktop

30” (gas cooktop)

30” (electrcal cooktop)

10 / 62 EN

Range Hood / User Manual

3.2 Dimensions and

Clearances

30”- 36”- 42“ - 48”

18”

25”

12”

6 - 1/2”

3 3/4”

18 - 1/16” Hotte de 48”

15 - 1/16” Hotte de 42”

12 - 1/16” Hotte de 36”

9 - 1/16” Hotte de 30”

CL

6”

8 -13/32”

18”

9 - 7/8””

CL

Top of Hood

Wood

Support

Bottom of Hood

House wiring

location

18 - 27/32” 48” Hood

15 - 27/32” 42” Hood

12 - 27/32” 36” Hood

9 - 27/32” 30” Hood

3.3 Ducting Options and

Examples

Closely follow the instructions set out in this

manual.

All responsibility, for any eventual inconveniences,

damages or fires caused by not complying with

the instructions in this manual, is declined.

3.3.1 Venting methods

Vent Exhaust Option

The hood is equipped with a transition B for

discharge of fumes to the outside (Ducting

version).

Minimum Duct Size (Ducting/Ductless version):

10” Round Pipe.

3 Techncal specfıcatons of your applance

3.4 Preparation

Do not cut a joist or stud unless absolutely

necessary. If a joist or stud must be cut, then a

supporting frame must be constructed.

Fittings material is provided to secure the hood to

most types of walls/ceilings.

However, a qualified technician must verify

suitability of the materials in accordance with the

type of wall/ceiling.

Range Hood / User Manual

11 / 62 EN

3 Techncal specfıcatons of your applance

Before making cutouts, make sure there is proper

clearance within the ceiling or wall for exhaust

vent.

Hood installation height above cooktop is the

users preference. The lower the hood is above

the cooktop, the more efficient the capturing of

cooking odors, grease and smoke.

A

WARNING: For gas ranges

installation: mount this

hood so that the bottom

edge is at 30” (76,2 cm)

above the cooking surface.

For electric ranges instal-

lation: mount this hood so

that the bottom is not less

than 30” (76,2 cm) and not

more that 36” above the

cooking surface.

Household use. Please,

read installation manual

for specific application.

Check your ceiling height and the hood height

maximum before you select your hood.

12 / 62 EN

Range Hood / User Manual

4 Installng your applance

4.1 Installation - Ducting

version

• If possible, disconnect and move freestanding or

slide-in range from cabinet opening to provide

easier access to rear wall. Otherwise put a thick,

protective covering over countertop, cooktop or

range to protect from damage and debris. Select

a flat surface for assembling the unit. Cover that

surface with a protective covering and place all

canopy hood parts and hardware in it.

• Determine and mark the centerline on the wall

where the canopy hood will be installed.

• Select a mounting height comfortable for the

user and mark on wall.

• Tape template, matching center-line and hood

bottom.

4.2 İnstall hood onto wall

A

IMPORTANT:

Framing must be

capable of supporting up to 150 lbs.

• Locate at least.2 vertical studs at the wood

support.

• Center the supplied wood support, left to right

and below the 15 3/8” marked line.

30”

• Secure the wood support to 2 or more vertical

studs, using at least 2 of the 4 supplied long

screws.

A

IMPORTANT:

Screws must

penetrate at least 1 1/2” into vertical

studs. Countersink screws into

support.

C

The mounting screws must remain

in their original shipping location.

These screws are positioned to

engage the keyhole slots in the back

of the hood.

• Adjust depth of original mounting srcrews in the

wood support until they protrude 1/4” forward.

This 1/4” gap will provide clearance to hang the

hood.

4.2.1 Install Transition Onto Top

of Hood

A

IMPORTANT:

Remove shipping

tape from damper and check that

damper moves freely.

• Place the transition piece over the hood exhaust

and secure with 4 screws provided.

• Use duct tape to seal the connection. Check to

be sure the damper moves freely.

Range Hood / User Manual

13 / 62 EN

4 Installng your applance

4.2.2 Hang hood on wood

support

• Lift the hood and hold close to the installation

location. Route house wiring through the

knockout and into the junction box.

• Place the hood over the wood support. Be sure

the mounting screws engage the keyhole slots

in the back of the hood.

Tighten the screws.

A

WARNING:

Continue to provide

additional support while the hood is

mounted with only these 2 screws.

These screws will not support the weight of the

hood. The hood could fall resulting in damage or

personal injury.

• Check to be sure the hood is level and centered.

30”

4.2.3 Install bottom mounting

screws

• Drill 1/8” pilot holes into the two lower mounting

holes. Enlarge the holes if they did not enter

studs to 3/8”. Insert anchors for wall fasteners

into bottom holes. Remove anchor screws and

add flat washers provided. Drive screws into

anchors and tighten.

• Install 4 additional screws through the back of

the hood and into the wood support.

4.3 İnstall hood ceiling or

beneath cabinets

(Skip this step if using wall mounting method)

A

IMPORTANT:

Ceiling framing

must be capable of supporting up to

150 lbs.

• The ceiling should be constructed with 2x4’s.

• Determine the installation location on the wall.

• Continue the centerline forward on the bottom

of the cabinet or ceiling.

• The opening above the hood should allow for

the 10” round duct and clearance to slide the

hood back against the wall.

• The 2x4 studs must be located as shown in the

chart, Dim. A to accept monting screw.

• Drill 1/8” pilot holes into the studs at the

locations show in the illustration.

14 / 62 EN

Range Hood / User Manual

4 Installng your applance

23 9/16 “ 48”

20 9/16” 42”

17 9/16 36”

14 9/16” 30”

4.3.1 Install Transition Onto

Top of Hood

A

IMPORTANT:

Remove shipping

tape from damper and check that

damper moves freely.

• Place the transition piece over the hood exhaust

and secure with 4 screws provided.

• Use duct tape to seal the connection. Check to

be sure the damper moves freely.

4.3 2 Mount hood onto ceiling

or cabinet

C

If mounting to the underside of a

cabinet with a recessed bottom,

install shims to fill the gap.

• Drive mounting screws into the studs until

they protrude 1/4”. The 1/4” gap will provide

clearance to engage the keyhole slots in the top

of the hood.

• Lift hood to installation position. Locate house

wiring and route trough the knockout (from the

back or top of the hood).

• Lift hood onto mounting screws. Slide back

against the rear wall.

• Tighten mounting screws.

A

IMPORTANT:

For additional

support and to minimize vibration

during operation, the hood must be

secured to the back wall. Use wall

anchors to fasten bottom back of

hood to the wall.

Range Hood / User Manual

15 / 62 EN

4 Installng your applance

4.3.3 Connecting the

ductwork

• Install ductwork, making connections in the

direction of airflow as illustrated.

• Push duct over the exhaust outlet.

• Wrap all duct joints and the flange connections

with duct tape for an airtight seal.

• Make the same connection in the wall or ceiling

vent exit.

4.3.4 Electrical connection

Electrical Shock Hazard

B

Turn off power circuit at the service

panel before wiring this unit. 120

VAC, 15 or 20 Amp circuit required.

Electrical grounding instructions

This appliance is fitted with an electrical junction

box with 3 wires, one of which (green/yellow)

serves to ground the appliance.

To protect you against electric shock, the green

and yellow wire must be connected to the

grounding wire in your home electrical system,

and it must under no circumstances be cut or

removed.

Failure to do so can result in death or electrical

shock.

Remove the knockout and the Junction box cover

and install the conduit connector (cULus listed) in

junction box.

4.3.5 Install Motor

• From the inside of the hood, slip motor into the

attachment slot on the left.

• Rotate motor upwards until it snaps into the

spring clip on the right.

• Secure the motor to the hood with the machine

screw and lock washer. (Screw is marked with

red or blue paint).

A

IMPORTANT:

Connector ends

are designed to mate only one way.

Match flat and round connectors as

shown.

16 / 62 EN

Range Hood / User Manual

4 Installng your applance

• Plug connector into the motor.

Spring clip

Attachment

screw

Fig. 1: Single motor installation (30” range hood

model only)

Fig. 2: Double motor installation (36”, 42” & 48”

range hood models only)

Install the grease filter and turn power on at

service panel.

Check operation of the hood.

If range hood does not operate:

• Check that the circuit breaker is not tripped or

the house fuse blown.

• Disconnect power supply. Check that wiring is

correct.

To get the most efficient use from your new range

hood, read the “Use and Care Information” section.

Keep your Installation Instructions and Use and

Care Guide close to range hood for easy reference.

Range Hood / User Manual

17 / 62 EN

5 Operatng your applance

5.1 Description of the hood &

Controls

1. Blower and light controls

2. Lamp housings

3. Grease filter Handle

4. Grease filter

5.1.1 Controls

Use the high suction speed in cases of

concentrated kitchen vapours. It is recommended

that the cooker hood suction is switched on for 5

minutes prior to cooking and to leave in operation

during cooking and for another 15 minutes

approximately after terminating cooking.

5.1.2 Description of control panel

1. Light Control

– Turn the light control from OFF to HI for the

brightest light while cooking.

2. Fan Control

– Turn the fan control speed from OFF to HI as

needed.

18 / 62 EN

Range Hood / User Manual

6 Cleanng and mantenance

6.1 Maintenance

C

Before performing any maintenance

operation, isolate the hood from the

electrical supply by switching off

at the connector and removing the

connector fuse.

Or if the appliance has been con-

nected through a plug and socket,

then the plug must be removed from

the socket.

6.2 Cleaning

• The cooker hood should be cleaned regularly

(at least with the same frequency with which

you carry out maintenance of the fat filters)

internally and externally. Clean using the cloth

dampened with neutral liquid detergent. Do

not use abrasive products.

DO NOT USE

ALCOHOL!

A

WARNING:

Failure to carry out

the basic cleaning recommenda-

tions of the cooker hood and re-

placement of the filters may cause

fire risks.

• Therefore, we recommend oserving these

instructions.

• The manufacturer declines all responsibility for

any damage to the motor or any fire damage

linked to inappropriate maintenance or failure

to observe the above safety recommendations.

6.3 Grease Filter

Traps cooking grease particles.

This must be cleaned once a month using non

aggressive detergents, either by hand or in

the dishwasher, which must be set to a low

temperature and a short cycle. When washed in a

dishwasher, the grease filter may discolour slightly,

but this does not affect its filtering capacity.

6.3.1 Remove grease filters

• To remove the filters, grasp the handle, push the

filter up and lift out.

6.3.2 İnstall grease filters

• Place filter drip trays into the rear of the hood.

• Insert the grease filter into opening and drop

into the trays.

6.4 Replacing the light bulb

C

Before replacing the lamps, switch

power off at service panel and

lock service panel disconnecting

means to prevent power from being

switched on accidentally.

C

Turn off the lights and fan. Allow the

lights to cool before handling. If new

lights do not operate be sure lights

are inserted correctly before calling

service.

Range Hood / User Manual

19 / 62 EN

6 Cleanng and mantenance

Replace Lights

• Remove the damaged light (twist counter

clockwise) and replace with a new 120 Volt, 50

Watt (maximum) 50° halogen light made for a

GU10 base, suitable for use in open luminarie.

20 / 62 EN

Range Hood / User Manual

7 Warranty

Warranty Statement For Blomberg Range Hoods

1 800 459 9848

otherwise

La page charge ...

Blomberg BCHP30100SS Manuel utilisateur

Ce manuel convient également à

Blomberg BCHP30100SS Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents