Telit Wireless Solutions LN940 WWAN M.2 Manuel utilisateur

LN940 WWAN M.2

Engineering User Guide

Rev. 1.0 – 2017-06-23

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

NOTICE

While reasonable efforts have been made to assure the accuracy of this

document, Telit assumes no liability resulting from any inaccuracies or omissions

in this document, or from use of the information obtained herein. The information

in this document has been carefully checked and is believed to be reliable.

However, no responsibility is assumed for inaccuracies or omissions. Telit

reserves the right to make changes to any products described herein and

reserves the right to revise this document and to make changes from time to

time in content hereof with no obligation to notify any person of revisions or

changes. Telit does not assume any liability arising out of the application or use

of any product, software, or circuit described herein; neither does it convey

license under its patent rights or the rights of others.

It is possible that this publication may contain references to, or information about

Telit products (machines and programs), programming, or services that are not

announced in your country. Such references or information must not be

construed to mean that Telit intends to announce such Telit products,

programming, or services in your country.

COPYRIGHTS

This instruction manual and the Telit products described in this instruction

manual may be, include or describe copyrighted Telit material, such as computer

programs stored in semiconductor memories or other media. Laws in the Italy

and other countries preserve for Telit and its licensors certain exclusive rights

for copyrighted material, including the exclusive right to copy, reproduce in any

form, distribute and make derivative works of the copyrighted material.

Accordingly, any copyrighted material of Telit and its licensors contained herein

or in the Telit products described in this instruction manual may not be copied,

reproduced, distributed, merged or modified in any manner without the express

written permission of Telit. Furthermore, the purchase of Telit products shall not

be deemed to grant either directly or by implication, estoppel, or otherwise, any

license under the copyrights, patents or patent applications of Telit, as arises by

operation of law in the sale of a product.

COMPUTER SOFTWARE COPYRIGHTS

The Telit and 3rd Party supplied Software (SW) products described in this

instruction manual may include copyrighted Telit and other 3rd Party supplied

computer programs stored in semiconductor memories or other media. Laws in

the Italy and other countries preserve for Telit and other 3rd Party supplied SW

certain exclusive rights for copyrighted computer programs, including the

exclusive right to copy or reproduce in any form the copyrighted computer

program. Accordingly, any copyrighted Telit or other 3rd Party supplied SW

computer programs contained in the Telit products described in this instruction

manual may not be copied (reverse engineered) or reproduced in any manner

without the express written permission of Telit or the 3rd Party SW supplier.

Furthermore, the purchase of Telit products shall not be deemed to grant either

directly or by implication, estoppel, or otherwise, any license under the

copyrights, patents or patent applications of Telit or other 3rd Party supplied SW,

except for the normal non-exclusive, royalty free license to use that arises by

operation of law in the sale of a product.

USAGE AND DISCLOSURE RESTRICTIONS

I. License Agreements

The software described in this document is the property of Telit and its licensors.

It is furnished by express license agreement only and may be used only in

accordance with the terms of such an agreement.

II. Copyrighted Materials

Software and documentation are copyrighted materials. Making unauthorized

copies is prohibited by law. No part of the software or documentation may be

reproduced, transmitted, transcribed, stored in a retrieval system, or translated

into any language or computer language, in any form or by any means, without

prior written permission of Telit

III. High Risk Materials

Components, units, or third-party products used in the product described herein

are NOT fault-tolerant and are NOT designed, manufactured, or intended for use

as on-line control equipment in the following hazardous environments requiring

fail-safe controls: the operation of Nuclear Facilities, Aircraft Navigation or

Aircraft Communication Systems, Air Traffic Control, Life Support, or Weapons

Systems (High Risk Activities"). Telit and its supplier(s) specifically disclaim any

expressed or implied warranty of fitness for such High Risk Activities.

IV. Trademarks

TELIT and the Stylized T Logo are registered in Trademark Office. All other

product or service names are the property of their respective owners.

V. Third Party Rights

The software may include Third Party Right software. In this case you agree to

comply with all terms and conditions imposed on you in respect of such separate

software. In addition to Third Party Terms, the disclaimer of warranty and

limitation of liability provisions in this License shall apply to the Third Party Right

software.

TELIT HEREBY DISCLAIMS ANY AND ALL WARRANTIES EXPRESS OR

IMPLIED FROM ANY THIRD PARTIES REGARDING ANY SEPARATE FILES,

ANY THIRD PARTY MATERIALS INCLUDED IN THE SOFTWARE, ANY

THIRD PARTY MATERIALS FROM WHICH THE SOFTWARE IS DERIVED

(COLLECTIVELY “OTHER CODE”), AND THE USE OF ANY OR ALL THE

OTHER CODE IN CONNECTION WITH THE SOFTWARE, INCLUDING

(WITHOUT LIMITATION) ANY WARRANTIES OF SATISFACTORY QUALITY

OR FITNESS FOR A PARTICULAR PURPOSE.

NO THIRD PARTY LICENSORS OF OTHER CODE SHALL HAVE ANY

LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT

LIMITATION LOST PROFITS), HOWEVER CAUSED AND WHETHER MADE

UNDER CONTRACT, TORT OR OTHER LEGAL THEORY, ARISING IN ANY

WAY OUT OF THE USE OR DISTRIBUTION OF THE OTHER CODE OR THE

EXERCISE OF ANY RIGHTS GRANTED UNDER EITHER OR BOTH THIS

LICENSE AND THE LEGAL TERMS APPLICABLE TO ANY SEPARATE FILES,

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

APPLICABILITY TABLE

PRODUCTS

LN940A11

LN940A9

Contents

NOTICE 2

COPYRIGHTS ................................................................................................ 2

COMPUTER SOFTWARE COPYRIGHTS ...................................................... 2

USAGE AND DISCLOSURE RESTRICTIONS ............................................... 3

APPLICABILITY TABLE ................................................................................ 5

CONTENTS .................................................................................................... 7

1. INTRODUCTION........................................................................... 9

Scope ............................................................................................ 9

Audience ....................................................................................... 9

Contact Information, Support ........................................................ 9

2. OVERVIEW ................................................................................. 10

M.2 Overview .............................................................................. 10

2.1.1. General Features ........................................................................ 10

2.1.2. Carrier Aggregation ..................................................................... 14

M.2 WWAN Module – System Block Diagram ............................. 16

Host Interface Signals ................................................................. 17

3. WWAN M.2 INTERFACE DETAILS ............................................ 22

Interprocessor Communications (IPC) ......................................... 22

3.1.1. USB 2.0 High-Speed ................................................................... 22

3.1.2. USB 3.0 Super-Speed ................................................................. 23

USIM Interface ............................................................................ 24

3.2.1. SIM Design Recommendations ................................................... 24

System Control Interface ............................................................. 26

3.3.1. Power On & Reset ...................................................................... 26

3.3.2. Host Radio Disable Operation ..................................................... 27

3.3.3. LED Interface – Status Indicator .................................................. 29

3.3.4. Wake on WWAN Signal .............................................................. 30

3.3.5. Dynamic Power Reduction .......................................................... 31

Tunable Antenna Interface .......................................................... 32

In-Device Coexistence Interface .................................................. 33

Power Supply Interface ............................................................... 34

Configuration Pins ....................................................................... 34

Antenna Interface ........................................................................ 35

4. OPERTAING ENVIRONMENT .................................................... 36

5. POWER DELIVERY REQUIREMENTS ...................................... 37

Electrical Parameters (3.3 V Power Supply) ................................ 37

Power Consumption .................................................................... 38

6. OTHER REQUIREMENTS .......................................................... 39

Conducted Transmit Power ......................................................... 39

Receiver Sensitivity ..................................................................... 39

Antenna Recommendations ........................................................ 41

GNSS Sensitivity ......................................................................... 42

7. WWAN CARD TYPE 3042 .......................................................... 43

Mechanical Dimension ................................................................ 43

LN940 WWAN M.2 Module Assembly ......................................... 44

Antenna Connector Assembly ..................................................... 45

Antenna Connector Locations ..................................................... 46

8. SAFETY RECOMMENDATIONS ................................................ 48

READ CAREFULLY .................................................................... 48

9. ACRONYMS ............................................................................... 49

10. DOCUMENT HISTORY............................................................... 51

1. INTRODUCTION

Scope

The document covers the technical features of and design guideline for Telit

LN940 WWAN M.2 Module. It also indicates application interface, hardware,

software, reliability and mechanical specification.

Audience

This document is intended to review by engineering designers, and product

managers.

Contact Information, Support

For general contact, technical support services, technical questions and report

documentation errors contact Telit Technical Support at:

 [email protected]

 [email protected]m

Alternatively, use:

http://www.telit.com/support

For detailed information about where you can buy the Telit modules or for

recommendations on accessories and components visit:

http://www.telit.com

Our aim is to make this guide as helpful as possible. Keep us informed of your

comments and suggestions for improvements.

Telit appreciates feedback from the users of our information.

2. OVERVIEW

This chapter provides an overview of standard features of Telit LN940 WWAN

M.2 Module.

M.2 Overview

LN940 WWAN M.2 module is the next generation cellular LTE product,

providing the connectivity on the world's fastest LTE networks in the extensive

coverage of worldwide LTE bands, with unprecedented network performance.

The WWAN M.2 module is in compliance of 3GPP releases 9, 10, 11, and 12,

in which the part of LTE advance carrier aggregation (2x and 3x in the

downlink) and high order modulation (up to 256 QAM) are supported.

2.1.1. General Features

Table 2.1.1-1 LN940 Feature Summary

Feature

Description

Additional

Information

Modem Chipset Qualcomm MDM9240

Carrier Aggregation 2CC & 3CC DL CA Up to inter-band 3CC

DL CA

LTE Category Cat6/Cat9 and up to

Cat11 @60Mhz

Physical PCI Express M.2 Module

Mechanical M2. Card Type 3042

Slot B

Pin counts : 75

30mm x 42mm x

2.3mm

Max Height=2.38mm

(0.08mm PCB

tolerance added)

Weight 6 grams

Operating Voltage 3.135V ~ 4.4V; Single

VCC Supply

Operating

Temperature

-40°C to +85 °C

Please refer to details

in Chapter 7

USIM Off-board USIM

connector Supported

RX Diversity

ALL LTE and UMTS

Bands Supported

GNSS

GPS: L1

(1575.42MHz)

GLONASS: L1

(1602MHz)

Beidou

(1561.098MHz)

Data Service

LTE CAT 11:

600Mbps DL/50Mbps

UL

LTE CAT 9:

450Mbps DL/50 Mbps

UL

LTE CAT 6:

300Mbps DL/50Mbps

UL

DC-HSPA+:

42Mbps DL/5.76Mbps

UL

HSPA+:

21Mbps DL/5.76Mbps

UL

WCDMA PS

384Kbps DL/384Kbps

UL

WCDMA CS

64Kbps DL/64Kbps UL

There are 22 LTE and 7 UMTS bands supported by Telit LN940 WWAN M.2

Module.

Table 2.1.1 -2 Supported LN940 LTE Bands

E-UTRA

BAND

Frequency

(Mhz)

Uplink

Frequency

UE Receive

(Mhz)

Downlink

Frequency

UE Receive

(Mhz)

Duplex

Mode

1 2100 1920-1980 2110-2170 FDD

2 1900 1850-1910 1930-1990 FDD

3 1800 1710-1785 1805-1880 FDD

4 1700 1710-1755 2110-2155 FDD

5 850 824-849 869-894 FDD

7 2600 2500-2570 2620-2690 FDD

8 900 880-915 925-960 FDD

12 700 699-716 729-746 FDD

13 700 777-787 746-756 FDD

17 700 704-716 734-746 FDD

18 850 815-830 860-875 FDD

19 850 830-845 875-890 FDD

20 800 832-862

791 – 821

FDD

21 1500 1477.9-

1462.9

1495.9-

1510.9

FDD

25 1900 1850-1915 1930-1995 FDD

26 850 814-849 859-894 FDD

28 700 703-748 758-803 FDD

29 700 N/A 717-728 FDD

30 2300 2305-2315 2350-2360 FDD

38 2600 2570-2620 TDD

39 1900 1880-1920 TDD

40 2300 2300-2400 TDD

41 2500 2496-2690 TDD

66 1700 1710-1780 2110-2200 FDD

Table 2.1.1 -2 Supported LN940 UMTS Bands

UTRA

BAND

Frequency

(Mhz)

Uplink

Frequency

UE Receive

(Mhz)

Downlink

Frequency

UE Receive

(Mhz)

Duplex

Mode

1 2100 1920-1980 2110-2170 FDD

2 1900 1850-1910 1930-1990 FDD

4 1700 1710-1755 2110-2155 FDD

5 850 824-849 869-894 FDD

6 800 830-840 875-885 FDD

8 900 880-915 925-960 FDD

19 850 830-845 875-890 FDD

2.1.2. Carrier Aggregation

With the LTE-A carrier aggregation and high order modulation scheme Telit

LN940 WWAN M.2 module is designed to run on the world’s fastest LTE

networks. In the following tables there are seventy 2CC and sixty-four 3CC

configurations shown in inter-band,and intra-band CA types in single duplex

(FDD only) nd in hybrid duplex (FDD+TDD) modes.

Table 2.1.2-1 Two Carrier Component Carrier Aggregation

Configurations (Downlink)

Region

Carrier

2CC DL CA Combinations

North America AT&T, VZW,

Sprint, TMO

B2+ B2, B2+ B4, B2 + B5, B2+

B12, B2 + B13, B2 +B17, B2 + B29,

B2 + B30, B4+ B4, B4 + B5, B4

+ B7, B4+B12, B4 + B13, B4 +

B17,B4+ B29, B4 + B30, B5+B30,

B12 + B12, B12 + B30, B25

+ B25, B25 + B26, B25+B41, B26 +

B41, B29+B30, B41+B41, B2+B66,

B5+B66, B12+B66, B13+B66,

B66+B66, B29+B66, B30+B66

Korea SKT, KT, LGU+ B1+B5, B1+B3, B1+B7, B3+B5,

B3+B8, B5+ B7, B3+B7, B7+B7

Japan KDDI, Docomo,

Softbank

B1+B3, B1+B8, B1+B18, B1+B19,

B1+B26, B3+B19, B19+B21,

B41+B41

EU Various B1+B20, B3+B3, B3+B7, B3+ B20,

B3+ B38, B7+B7, B7+B8, B7+B20,

B38+B38

China CMCC, CTCC,

CUCC

B1+B3, B1+B26, B3+B26, B3+B40,

B39+B39, B39+B41, B40+B40,

B41+B41

Australia/SEA/LA Telstra, Optus B1+B3, B1+ B7, B1 + B28, B3+ B8,

B3 + B28, B5 + B7, B5+ B40, B7 +

B8, B7 +B28

Table 2.1.2-1 Three Carrier Component Carrier Aggregation

Configurations

Region

Carrier

3CC DL CA Combinations

North America AT&T, VZW,

Sprint, TMO

B2+ B2+ B2, B2 + B2 + B12, B2

+B2+B13, B2+B4+B4, B2+B4+B5,

B2+B4 +B12, B2+B4+B13, B2+ B4 +

B29, B2+ B5+B30, B2+B12+B12,

B2+B12+ B30, B2+B29+B30,

B4+B4+B5, B4+B4+B7,

B4+B4+B12, B4+B4 +B13, B4+ B5 +

B30, B4+B12+B12, B4+B12+B30,

B4+B29+ B30, B25+B26+B41,

B25+B41+B41, B26+B41+B41,

B41+B41+B41, B13+B66+B2,

B12+B66+B66, B13+B66+B66,

B5+B66+B2, B5+B66+B66,

B66+B66+B2, B66+B66+B66

Korea SKT, KT,

LGU+

B1+B3+B5, B1+B7+B7, B1+B3+B8,

B1+B5+B7, B3+B5+B7,B1+B7+B28,

B3+B7+B8, B3+B7+B7, B5+B7+B7

Japan KDDI,

Docomo,

Softbank

B1+B3+B19, B1+B3+B28,

B1+B41+B41, B41+B41+B41

EU Various B1+B3+B20, B1+B7+B20, B3+B3+

B7, B3+B3+B20, B3+B7+B20,

B3+B7+B7,

B3+B20+B38,B3+B38+B38

China CMCC, CTCC,

CUCC

B1+B3+B3, B1+B3+B26,

B1+B3+B41, B3+B40+B40,

B39+B39+B41, B39+B41+B41,

B40+B40+B40, B41+B41+B41

Australia/SEA/LA Telstra, Optus B3+B3+B5, B3+B3+B8, B3+B7+B7,

B3+B7+B28, B7+B7+B28,

B3+B40+B40, B28+B40+B40,

B40+B40+B40

M.2 WWAN Module – System Block Diagram

Figure 2.2-1 System Block Diagram

Host Interface Signals

Telit LN940 WWAN M.2 is the PCIe M.2 standard compliant 3042 Slot B

module. The main function and basic requirement of 75 pins are introduced

in the following table.

Table 2.3-1 Host Interface Summary

Pin Signal Name I/O Description Supply

1 CONFIG_3 O

2 Power Supply I 3.3V

3 GND

4 Power Supply I 3.3V

5 GND

6 FULL_CARD_POWER_OFF#

I 1.8V/3.3V

7 USB_D+ IO

8 W_DISABLE1# I 3.3V

9 USB_D- IO

10 LED# O Open Drain,

Active

Low@40mA,

indicating LED

ON

11 GND

12 SLOT KEY

13 SLOT KEY

14 SLOT KEY

15 SLOT KEY

16 SLOT KEY

17 SLOT KEY

18 SLOT KEY

19 SLOT KEY

20 GPIO_5 AUDIO_0 IO 1.8V

21 CONFIG_0 O

22 GPIO_6 AUDIO_1 IO 1.8V

23 GPIO_3 WoWWAN# O 1.8V

24 GPIO_7 AUDIO_2 IO 1.8V

25 Dynamic Power Reduction I 3.3V

26 W_DISABLE2# I 3.3V

27 GND Pin

28 GPIO_8 AUDIO_3 IO 1.8V

29 USB 3.0 TX- O

30 UIM_Reset O

31 USB 3.0 TX+ O

32 UIM_CLK O

33 GND Pin

34 UIM_DATA IO

35 USB 3.0 RX- I

36 UIM_PWR Pout

37 USB 3.0 RX+ I

38 Not Connected

39 GND Pin

40 GNSS_SCL I/O Reserved

41 PETn0 Reserved,

Disabled by

Default

42 GPIO_1 GNSS_SDA Reserved

43 PETp0 Reserved,

Disabled by

Default

44 GPIO_2 GNSS_IRQ Reserved

45 GND

46 GPIO_3 SYSCLK Reserved

47 PERn0 Reserved,

Disabled by

Default

48 GPIO_4 TX_BLANKING

49 PERp0 Reserved,

Disabled by

Default

50 PERST# Reserved,

Disabled by

Default

51 GND

52 CLKREQ# Reserved,

Disabled by

Default

53 REFCLKN Reserved,

Disabled by

Default

54 PEWAKE# Reserved,

Disabled by

Default

55 REFCLKP Reserved,

Disabled by

Default

56 MIPI_CLK

57 GND

58 MIPI_DATA

59 ANTCTL0 O

60 COEX3 IO

61 ANTCTL1 O

62 COEX_RXD I

63 ANTCTL2 O

64 COEX_TXD O

65 ANTCTL3 O

66 SIM_DETECT I

67 RESET# I

La page est en cours de chargement...

Telit Wireless Solutions LN940 WWAN M.2 Manuel utilisateur

Telit Wireless Solutions LN940 WWAN M.2 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents