MSI MS-7817 v4.0 Le manuel du propriétaire

Preface



Copyright Notice

The material in this document is the intellectual property of MICRO-STAR

INTERNATIONAL. We take every care in the preparation of this document, but no

guarantee is given as to the correctness of its contents. Our products are under

continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks in this manual are properties of their respective owners.

MSI

®

is registered trademark of Micro-Star Int’l Co.,Ltd.

NVIDIA

®

is registered trademark of NVIDIA Corporation.

ATI

®

is registered trademark of AMD Corporation.

AMD

®

is registered trademarks of AMD Corporation.

Intel

®

is registered trademarks of Intel Corporation.

Windows

®

is registered trademarks of Microsoft Corporation.

AMI

®

is registered trademark of American Megatrends Inc.

Award

®

is a registered trademark of Phoenix Technologies Ltd.

Sound Blaster

®

is registered trademark of Creative Technology Ltd.

Realtek

®

is registered trademark of Realtek Semiconductor Corporation.

JMicron

®

is registered trademark of JMicron Technology Corporation.

Netware

®

is registered trademark of Novell, Inc.

Lucid

®

is trademark of LucidLogix Technologies, Ltd.

VIA

®

is registered trademark of VIA Technologies, Inc.

ASMedia

®

is registered trademark of ASMedia Technology Inc.

iPad, iPhone, and iPod are trademarks of Apple Inc.

Qualcomm Atheros and Killer are trademarks of Qualcomm Atheros Inc.

Revision History

Revision Revision History Date

V4.0 First release 203/ 2

￭

G52-787X6

Preface

2

Safety Instructions

Always read the safety instructions carefully.

Keep this User’s Manual for future reference.

Keep this equipment away from humidity.

Lay this equipment on a reliable at surface before setting it up.

The openings on the enclosure are for air convection hence protects the

equipment from overheating. DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source is at 0/220V before connecting the

equipment to the power inlet.

Place the power cord such a way that people can not step on it. Do not place

anything over the power cord.

Always Unplug the Power Cord before inserting any add-on card or module.

All cautions and warnings on the equipment should be noted.

Never pour any liquid into the opening that can cause damage or cause electrical

shock.

If any of the following situations arises, get the equipment checked by service

personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well or you can not get it work according to

User’s Manual.

The equipment has been dropped and damaged.

The equipment has obvious sign of breakage.

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT ABOVE 60

o

C

(40

o

F), IT MAY DAMAGE THE EQUIPMENT.

￭

◯

￭

California, USA:

The button cell battery may contain perchlorate material and requires

special handling when recycled or disposed of in California.

For further information please visit:

http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

Taiwan:

For better environmental protection, waste batteries should be

collected separately for recycling or special disposal.

廢電池請回收

European Union:

Batteries, battery packs, and accumulators should not be disposed

of as unsorted household waste. Please use the public collection

system to return, recycle, or treat them in compliance with the local

regulations.

Battery Information

CAUTION: There is a risk of explosion, if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

Preface

3

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 5 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined

by turning the equipment o and on, the user is encouraged to try to correct the

interference by one or more of the measures listed below.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit dierent from that to which

the receiver is connected.

Consult the dealer or an experienced radio/television technician for help.

Notice 

The changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

Micro-Star International

MS-787

This device complies with Part 5 of the FCC Rules. Operation is subject to the

following two conditions:

this device may not cause harmful interference, and

this device must accept any interference received, including interference that

may cause undesired operation.

CE Conformity

Hereby, Micro-Star International CO., LTD declares that this device is

in compliance with the essential safety requirements and other relevant

provisions set out in the European Directive.

◯

)

2)

Preface

4

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment and its antenna should be installed and

operated with minimum distance 20 cm between the radiator and your body. This

equipment and its antenna must not be co-located or operating in conjunction with

any other antenna or transmitter.

European Community Compliance Statement

The equipment complies with the RF Exposure Requirement 999/59/EC, Council

Recommendation of 2 July 999 on the limitation of exposure of the general public

to electromagnetic elds (0–300GHz). This wireless device complies with the R&TTE

Directive.

Taiwan Wireless Statements

無線設備警告聲明

經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更

頻率、加大功率或變更原設計之特性及功能。

低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應

立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之

無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機

設備之干擾。

警告使用者:這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在

這種情況下，使用者會被要求採取某些適當的對策。

Japan VCCI Class B Statement

クラス B 情報技術装置

この装置は、情報技術装置等電波障害自主規制協議会（VCCI）の基準に基づくクラ

スB情報技術装置です。この装置が家庭内でラジオやテレビジョン受信機に近接して

使われると、受信障害を引き起こすことがあります。取扱説明書にしたがって正し

い取り扱いをしてください。

Korea Warning Statements

당해 무선설비는 운용중 전파혼신 가능성이 있음

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH

Regulation (Regulation EC No. 907/2006 of the European Parliament and the

Council), MSI provides the information of chemical substances in products at:

http://www.msi.com/html/popup/csr/evmtprtt_pcm.html

Preface

5

产品中有毒有害物质或元素名称及含量

根据中国<电子信息产品污染控制管理办法>

部件名称

有毒有害物质或元素

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr6+)

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

印刷电路板组件* ☓ 〇〇〇〇〇

电池**

☓ 〇〇〇〇〇

外部信号连接头 ☓ 〇〇〇〇〇

线材 ☓ 〇〇〇〇〇

〇: 表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T363-2006标

准规定的限量要求下。

☓: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T363-

2006标准规定的限量要求，但所有部件都符合欧盟RoHS要求。

* 印刷电路板组件: 包括印刷电路板及其构成的零部件。

** 电池本体上如有环保使用期限标识，以本体标识为主。

上述有毒有害物质或元素清单会依型号之部件差异而有所增减。

產品部件本体上如有环保使用期限标识，以本体标识为主。

■

Preface

6

WEEE Statement

WEEE (Waste Electrical and Electronic Equipment)

ENGLISH

To protect the global environment and as an environmentalist, MSI must

remind you that...

Under the European Union (“EU”) Directive on Waste Electrical and

Electronic Equipment, Directive 2002/96/EC, which takes eect on August 3, 2005,

products of “electrical and electronic equipment” cannot be discarded as municipal

wastes anymore, and manufacturers of covered electronic equipment will be

obligated to take back such products at the end of their useful life. MSI will comply

with the product take back requirements at the end of life of MSI-branded products

that are sold into the EU. You can return these products to local collection points.

DEUTSCH

Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt

Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen

Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden.

MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt,

die in die Europäische Union in Verkehr gebrachten Produkte, am Ende seines

Lebenszyklus zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen

Zeitpunkt ausschliesslich an einer lokalen Altgerätesammelstelle in Ihrer Nähe.

FRANÇAIS

En tant qu’écologiste et an de protéger l’environnement, MSI tient à rappeler ceci...

Au sujet de la directive européenne (EU) relative aux déchets des équipement

électriques et électroniques, directive 2002/96/EC, prenant eet le 3 août 2005,

que les produits électriques et électroniques ne peuvent être déposés dans les

décharges ou tout simplement mis à la poubelle. Les fabricants de ces équipements

seront obligés de récupérer certains produits en n de vie. MSI prendra en compte

cette exigence relative au retour des produits en n de vie au sein de la communauté

européenne. Par conséquent vous pouvez retourner localement ces matériels dans

les points de collecte.

РУССКИЙ

Компания MSI предпринимает активные действия по защите окружающей

среды, поэтому напоминаем вам, что....

В соответствии с директивой Европейского Союза (ЕС) по предотвращению

загрязнения окружающей среды использованным электрическим и электронным

оборудованием (директива WEEE 2002/96/EC), вступающей в силу 3

августа 2005 года, изделия, относящиеся к электрическому и электронному

оборудованию, не могут рассматриваться как бытовой мусор, поэтому

производители вышеперечисленного электронного оборудования обязаны

принимать его для переработки по окончании срока службы. MSI обязуется

соблюдать требования по приему продукции, проданной под маркой MSI на

территории EC, в переработку по окончании срока службы. Вы можете вернуть

эти изделия в специализированные пункты приема.

Preface

7

ESPAÑOL

MSI como empresa comprometida con la protección del medio ambiente,

recomienda:

Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o

equipos electrónicos, con fecha de rigor desde el 3 de agosto de 2005, los

productos clasicados como “eléctricos y equipos electrónicos” no pueden ser

depositados en los contenedores habituales de su municipio, los fabricantes de

equipos electrónicos, están obligados a hacerse cargo de dichos productos al

termino de su período de vida. MSI estará comprometido con los términos de

recogida de sus productos vendidos en la Unión Europea al nal de su periodo de

vida. Usted debe depositar estos productos en el punto limpio establecido por el

ayuntamiento de su localidad o entregar a una empresa autorizada para la recogida

de estos residuos.

NEDERLANDS

Om het milieu te beschermen, wil MSI u eraan herinneren dat….

De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische

en Electronische producten (2002/96/EC), die op 3 Augustus 2005 in zal gaan

kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort

producten worden verplicht om producten retour te nemen aan het eind van hun

levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten

die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen

geretourneerd worden op lokale inzamelingspunten.

SRPSKI

Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj

sredini, MSI mora da vas podesti da…

Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi,

Direktiva 2002/96/EC, koja stupa na snagu od 3. Avgusta 2005, proizvodi koji

spadaju pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan

otpad i proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na

kraju njihovog uobičajenog veka trajanja. MSI će poštovati zahtev o preuzimanju

ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su

prodati u EU. Ove proizvode možete vratiti na lokalnim mestima za prikupljanje.

POLSKI

Aby chronić nasze środowisko naturalne oraz jako rma dbająca o ekologię, MSI

przypomina, że...

Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów

elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 3

sierpnia 2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie

mogą być traktowane jako śmieci komunalne, tak więc producenci tych produktów

będą zobowiązani do odbierania ich w momencie gdy produkt jest wycofywany z

użycia. MSI wypełni wymagania UE, przyjmując produkty (sprzedawane na terenie

Unii Europejskiej) wycofywane z użycia. Produkty MSI będzie można zwracać w

wyznaczonych punktach zbiorczych.

Preface

8

TÜRKÇE

Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:

Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC

Kararnamesi altında 3 Ağustos 2005 tarihinden itibaren geçerli olmak üzere,

elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu

elektonik cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri

toplamakla yükümlü olacaktır. Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım

süreleri bittiğinde MSI ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır.

Ürünlerinizi yerel toplama noktalarına bırakabilirsiniz.

ČESKY

Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje...

Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických

výrobků 2002/96/EC platné od 3. srpna 2005 je zakázáno likvidovat “elektrické

a elektronické výrobky” v běžném komunálním odpadu a výrobci elektronických

výrobků, na které se tato směrnice vztahuje, budou povinni odebírat takové výrobky

zpět po skončení jejich životnosti. Společnost MSI splní požadavky na odebírání

výrobků značky MSI, prodávaných v zemích EU, po skončení jejich životnosti. Tyto

výrobky můžete odevzdat v místních sběrnách.

MAGYAR

Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként

fellépve az MSI emlékezteti Önt, hogy ...

Az Európai Unió („EU”) 2005. augusztus 3-án hatályba lépő, az elektromos

és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint

az elektromos és elektronikus berendezések többé nem kezelhetőek lakossági

hulladékként, és az ilyen elektronikus berendezések gyártói kötelessé válnak az

ilyen termékek visszavételére azok hasznos élettartama végén. Az MSI betartja

a termékvisszavétellel kapcsolatos követelményeket az MSI márkanév alatt az

EU-n belül értékesített termékek esetében, azok élettartamának végén. Az ilyen

termékeket a legközelebbi gyűjtőhelyre viheti.

ITALIANO

Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….

In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali

Elettrici ed Elettronici, Direttiva 2002/96/EC in vigore dal 3 Agosto 2005, prodotti

appartenenti alla categoria dei Materiali Elettrici ed Elettronici non possono più

essere eliminati come riuti municipali: i produttori di detti materiali saranno obbligati

a ritirare ogni prodotto alla ne del suo ciclo di vita. MSI si adeguerà a tale Direttiva

ritirando tutti i prodotti marchiati MSI che sono stati venduti all’interno dell’Unione

Europea alla ne del loro ciclo di vita. È possibile portare i prodotti nel più vicino

punto di raccolta

Preface

9

Contents

English ......................................................................................

Motherboard Specications ....................................................................................2

Back Panel ..............................................................................................................4

CPU & Heatsink Installation ....................................................................................5

Memory Installation .................................................................................................7

Internal Connectors.................................................................................................8

BIOS Setup .............................................................................................................26

한국어 .......................................................................................33

메인보드 사양 .........................................................................................................34

후면 패널 .................................................................................................................36

CPU 및 히트싱크 설치 ............................................................................................37

메모리 설치 .............................................................................................................39

내장 커넥터 .............................................................................................................40

BIOS 설정 ...............................................................................................................48

Français ....................................................................................55

Spécications ..........................................................................................................56

Panneau Arrière ......................................................................................................58

Installation du CPU et son ventilateur .....................................................................59

Installation de mémoire ...........................................................................................6

Connecteurs d’alimentation ....................................................................................62

Conguration BIOS .................................................................................................70

Deutsch ....................................................................................77

Spezikationen........................................................................................................78

Rücktafel-Übersicht.................................................................................................80

CPU & Kühlkörper Einbau ......................................................................................8

Speicher ..................................................................................................................83

Interne Anschlüsse .................................................................................................84

BIOS Setup .............................................................................................................92

Русский ....................................................................................99

Характеристики материнской платы..................................................................00

Задняя панель .....................................................................................................02

Установка ЦП и радиатора .................................................................................03

Установка памяти ................................................................................................05

Внутренние разъемы ..........................................................................................06

Настройка BIOS ...................................................................................................4

Preface

0

简体中文 .................................................................................2

主板规格 ................................................................................................................22

后置面板指南 ........................................................................................................24

CPU & 风扇安装 ....................................................................................................25

内存安装 ................................................................................................................27

内部接口 ................................................................................................................28

BIOS Setup ...........................................................................................................36

繁體中文 .................................................................................43

規格 .......................................................................................................................44

背板快速指南 ........................................................................................................46

安裝 CPU 與散熱風扇 ...........................................................................................47

安裝記憶體 ............................................................................................................49

內建接頭 ................................................................................................................50

BIOS 設定 .............................................................................................................58

日本語 .....................................................................................65

マザーボードの仕様 ..............................................................................................66

I/Oパネル ..............................................................................................................68

CPUおよびヒートシンクの装着 ...........................................................................69

メモリの装着 ........................................................................................................7

内部コネクター .....................................................................................................72

BIOSの設定 ...........................................................................................................80

English



English

Thank you for choosing the H8M-E35 V2 Series (MS-787 v4.X) Micro-ATX

motherboard. The H8M-E35 V2 Series motherboards are based on Intel H8

chipset for optimal system eciency. Designed to t the advanced Intel LGA50

processor, the H8M-E35 V2 Series motherboards deliver a high performance and

professional desktop platform solution.

Layout

BAT1

JAUD1

JCOM1

JLPT1

JFP1

JFP2

JUSB2 JUSB1

SATA3SATA4

PCI_E1

SYSFAN1

JUSB_PW1

JPWR2

PCI_E2

PCI_E3

PCI1

JUSB_PW2

JTPM1

JBAT1

JCI1

SA

T

A1_2

JUSB3

JPWR1

SYSF

AN

2

CPUFAN

DIMM1

DIMM2

Top : mouse

Bottom : ke yb oa rd

Top: LAN jack

Bottom : US B2 .0 p orts

Top: VGA port

Bottom : DV I- D po rt

T:Line-I n

M:Line - Ou t

B:MIC- In

USB3.0 por ts

HDMI port

English

2

Motherboard Specications

CPU

Support

4th Generation Intel

®

Core™ i7 / Core™ i5 / Core™ i3 /

Pentium

®

/ Celeron

®

processors for LGA 50 socket

■

Chipset Intel

®

H8 Express Chipset■

Memory

Support

2x DDR3 memory slots supporting up to 6GB

Supports DDR3 600/ 333/ 066 MHz

Dual channel memory architecture

Supports non-ECC, un-buered memory

■

Expansion

Slots

x PCIe 2.0 x6 slot

2x PCIe 2.0 x slots

x PCI slot

■

Onboard

Graphics

x HDMI port, supporting the maximum resolutions of

2560x600@60Hz, 24bpp/ 920x080@60Hz, 36bpp

x DVI-D port, supporting a maximum resolution of 920x200

@ 60Hz, 24bpp

x VGA port, supporting a maximum resolution of 920x200

@ 60Hz, 24bpp

■

Storage Intel H8 Express Chipset

2x SATA 6Gb/s ports (SATA_2)

2x SATA 3Gb/s ports (SATA3~4)

■

-

USB Intel H8 Express Chipset

2x USB 3.0 ports available through an onboard USB 3.0

connector

6x USB 2.0 ports (2 ports on the back panel, 4 ports avail-

able through two onboard USB 2.0 connectors)

VIA VL805 Chipset

4x USB 3.0 ports on the back panel

■

-

■

-

Audio Realtek

®

ALC887 Codec■

LAN Realtek

®

RTL8G Gigabit LAN controller■

Back Panel

Connectors

x PS/2 keyboard port

x PS/2 mouse port

4x USB 3.0 ports

x HDMI port

x VGA port

x DVI-D port

x LAN (RJ45) port

2x USB 2.0 ports

3x audio jacks

■

English

3

Internal

Connectors

x 24-pin ATX main power connector

x 4-pin ATX 2V power connector

2x SATA 6Gb/s connectors

2x SATA 3Gb/s connectors

2x USB 2.0 connectors (supports additional 4 USB 2.0 ports)

x USB 3.0 connector (supports additional 2 USB 3.0 ports)

x 4-pin CPU fan connector

x 4-pin system fan connector

x 3-pin system fan connector

x Front panel audio connector

2x System panel connectors

x TPM connector

x Parallel port connector

x Serial port connector

x Chassis intrusion connector

x Clear CMOS jumper

2x USB power jumpers

■

BIOS

Features

UEFI AMI BIOS

ACPI 5.0, PnP .0a, SM BIOS 2.7, DMI 2.0

Multi-language

■

Form Factor Micro-ATX Form Factor

9.6 in. x 6.8 in. (24.38 cm x 7.3 cm)

■

For the latest information about CPU, please visit

http://www.msi.com/service/cpu-support/

For more information on compatible components, please

visit http://www.msi.com/service/test-report/

English

4

Back Panel

Important

The USB 3.0 ports on the back panel do not support wake-up function.

LAN LED Indicator

LINK/ACT

LED

SPEED

LED

LED LED Status Description

Link/ Activity LED

O No link

Yellow Linked

Blinking Data activity

Speed LED

O 0 Mbps connection

Green 00 Mbps connection

Orange  Gbps connection

Audio 2, 4, 6 or 8-channel conguration

Port 2-channel 4-channel 6-channel 8-channel

Blue Line in RS-Out RS-Out RS-Out

Green Line out FS-Out FS-Out FS-Out

Pink Mic Mic CS-Out CS-Out

Front audio - - - SS-Out

PS/2 Mouse

PS/2 Keyboard

USB 3.0 USB 3.0

HDMI

VGA

Line-In

Line-Out

Mic

USB 2.0

LAN

DVI-D

®

English

5

CPU & Heatsink Installation

When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink

is necessary to prevent overheating and maintain system stability. Follow the steps

below to ensure correct CPU and heatsink installation. Wrong installation can

damage both the CPU and the motherboard.

. Push the load lever down to unclip it and lift to the fully open position.

2. The load plate will automatically lift up as the load lever is pushed to the fully

open position.

Important

Do not touch the socket contacts or the bottom of the CPU.

Video Demonstration

Watch the video to learn how to install CPU & heatsink.

http://youtu.be/bf5La099urI

Alignment Key

CPU notches

3. Align the notches with the socket alignment keys. Lower the CPU straight down,

without tilting or sliding the CPU in the socket. Inspect the CPU to check if it is

properly seated in the socket.

4. Close and slide the load plate under the retention knob. Close and engage the

load lever.

English

6

Thermal paste

Important

Conrm that the CPU heatsink has formed a tight seal with the CPU before booting

your system.

Whenever the CPU is not installed, always protect the CPU socket pins by

covering the socket with the plastic cap.

If you purchased a separate CPU and heatsink/ cooler, Please refer to the

documentation in the heatsink/ cooler package for more details about installation.

•

5. When you press down the load lever the PnP cap will automatically pop up from

the CPU socket. Do not discard the PnP cap. Always replace the PnP cap if the

CPU is removed from the socket.

6. Evenly spread a thin layer of thermal paste (or thermal tape) on the top of the

CPU. This will help in heat dissipation and prevent CPU overheating.

7. Locate the CPU fan connector on the motherboard.

8. Place the heatsink on the motherboard with the fan’s cable facing towards the

fan connector and the fasteners matching the holes on the motherboard.

9. Push down the heatsink until the four fasteners get wedged into the holes on

the motherboard. Press the four fasteners down to fasten the heatsink. As each

fastener locks into position a click should be heard.

0. Inspect the motherboard to ensure that the fastener-ends have been properly

locked in place.

. Finally, attach the CPU fan cable to the CPU fan connector on the motherboard.

English

7

Memory Installation

Video Demonstration

Watch the video to learn how to install memories at the address below.

http://youtu.be/76yLtJaKlCQ



2

3

Important

DDR3 memory modules are not interchangeable with DDR2, and the DDR3

standard is not backward compatible. Always install DDR3 memory modules in

DDR3 DIMM slots.

To ensure system stability, memory modules must be of the same type and density

in Dual-Channel mode.

•

English

8

Internal Connectors

JPWR~2: ATX Power Connectors

These connectors allow you to connect an ATX power supply. To connect the ATX

power supply, align the power supply cable with the connector and rmly press the

cable into the connector. If done correctly, the clip on the power cable should be

hooked on the motherboard’s power connector.

Video Demonstration

Watch the video to learn how to install power supply connectors.

http://youtu.be/gkDYyR_83I4

13.+3. 3

V

1.+3.3

V

14.-12 V

2.+3.3

V

15.Gro und

3

.Groun d

16.PS- ON

#

4.+5

V

17.Gro und

5

.Groun d

18.Gro und

6.+5

V

19.Gro und

7

.Groun d

22.+5

V

10.+12 V

20.Res

8.PW

R O

K

23.+5

V

11

.+12V

21.+5

V

9.5VSB

24.Gro und

12.+3. 3

V

JPWR

4.+12V

2

.Ground

3.+12V

1

.Ground

JPWR2

Important

Make sure that all the power cables are securely connected to a proper ATX power

supply to ensure stable operation of the motherboard.

JCOM: Serial Port Connector

This connector is a 6550A high speed communication port that sends/receives 6

bytes FIFOs. You can attach a serial device.

1

.

D

C

D

3

.

S

O

U

T

1

0

.

N

o

P

i

n

5

.

G

r

o

u

n

d

7

.

R

T

S

9

.

R

I

8

.

C

T

S

6

.

D

S

R

4

.

D

T

R

2

.

S

I

N

English

9

SATA_2, SATA3~4: SATA Connectors

This connector is a high-speed SATA interface port. Each connector can connect to

one SATA device. SATA devices include disk drives (HDD), solid state drives (SSD),

and optical drives (CD/ DVD/ Blu-Ray).

Video Demonstration

Watch the video to learn how to Install SATA HDD.

http://youtu.be/RZsMpqxythc

SATA3~4:

SATA 3Gb/s

connectors

SATA_2:

SATA 6Gb/s

connectors

Important

Many SATA devices also need a power cable from the power supply. Such devices

include disk drives (HDD), solid state drives (SSD), and optical drives (CD / DVD /

Blu-Ray). Please refer to the device’s manual for further information.

Many computer cases also require that large SATA devices, such as HDDs, SSDs,

and optical drives, be screwed down into the case. Refer to the manual that came

with your computer case or your SATA device for further installation instructions.

Please do not fold the SATA cable at a 90-degree angle. Data loss may result

during transmission otherwise.

SATA cables have identical plugs on either sides of the cable. However, it is

recommended that the at connector be connected to the motherboard for space

saving purposes.

JCI: Chassis Intrusion Connector

This connector connects to the chassis intrusion switch cable. If the computer case

is opened, the chassis intrusion mechanism will be activated. The system will record

this intrusion and a warning message will ash on screen. To clear the warning, you

must enter the BIOS utility and clear the record.

2

.

C

I

N

T

R

U

1

.

G

r

o

u

n

d

•

English

20

CPUFAN,SYSFAN~2: Fan Power Connectors

The fan power connectors support system cooling fans with +2V. If the motherboard

has a System Hardware Monitor chipset on-board, you must use a specially designed

fan with a speed sensor to take advantage of the CPU fan control. Remember to

connect all system fans. Some system fans may not connect to the motherboard and

will instead connect to the power supply directly. A system fan can be plugged into

any available system fan connector.

1

.Ground

2.+12V

3.Sens

e

4.Speed

C

ontro

l

1

.Gr ound

2.+ 12V

3.N o

Us

e

CPUFAN/ SYSFAN SYSFAN2

Important

Please refer to your processor’s ocial website or consult your vendor to nd

recommended CPU heatsink.

These connectors support Smart Fan Control with liner mode. The Command

Center utility can be installed to automatically control the fan speeds according to

the CPU’s and system’s temperature.

If there are not enough ports on the motherboard to connect all system fans,

adapters are available to connect a fan directly to a power supply.

Before rst boot up, ensure that there are no cables impeding any fan blades.

JAUD: Front Panel Audio Connector

This connector allows you to connect the front audio panel located on your computer

case. This connector is compliant with the Intel

®

Front Panel I/O Connectivity Design

Guide.

1.MI

C L

3.MI

C R

10.Head

P

hone

Detection

5.Head

P

hone

R

7.SENSE_SEN

D

9.Head

P

hone

L

8.No

Pi

n

6.MI

C D

etection

4.NC

2

.Ground

•

La page charge ...

MSI MS-7817 v4.0 Le manuel du propriétaire

Ce manuel convient également à

MSI MS-7817 v4.0 Le manuel du propriétaire

dans d''autres langues

Documents connexes