NAPOLEON M730RSBI-2 Le manuel du propriétaire
- Catégorie
- Barbecues
- Taper
- Le manuel du propriétaire
Ce manuel convient également à
Napoleon Appliance Corp.,
214 Bayview Dr., Barrie, Ontario, Canada L4N 4Y8 Phone: (705)726-4278
Fax: (705)725-2564 email: [email protected] web site: www.napoleongrills.com
WARNING
Do not try to light this appliance without
this manual.
-
or any other appliance. An L.P. cylinder not
-
causing property damage, personal injury or
death.
DANGER
IF YOU SMELL GAS:
appliance and immediately call your gas
APPLY SERIAL NUMBER LABEL FROM CARTON
Serial No.
XXXXXX000000
MODEL NO.
MIRAGE 730
N415-0198 FEB 27/09
building, garage, screened-in porch, gazebo or any other enclosed area.
2
www.napoleongrills.com
Napoleon Gas Grill President’s Limited Warranty
NAPOLEON warrants the following materials and workmanship in your new NAPOLEON
gas grill against defects for as long as you own the gas grill. This covers aluminum casngs
(excluding paint), LUXIDIO® trays, stainless steel side shelves, stainless steel control panel
(excluding screen prinng), stainless steel burners, stainless steel or porcelain lid inserts,
and lid handles, subject to the following condions: During the rst ve years NAPOLEON
will provide replacement parts at our opon free of charge. From the sixth year to lifeme,
NAPOLEON will provide replacement parts at 50% of the current retail price.
Components such as stainless steel sear plates, stainless steel or cast iron cooking grids,
valves with ignion system, temperature gauges, knobs, and ceramic infrared burners are
covered and Napoleon will provide parts free of charge during the rst two years of the lim-
ited warranty.
Components such as regulators, casters, warming racks, hoses and connectors, I-GLOW™,
fasteners and accessories are covered and NAPOLEON will provide parts free of charge dur-
ing the rst year of the limited warranty.
NAPOLEON shall not be liable for any transportaon charges, labor costs or export dues.
THANK YOU FOR CHOOSING NAPOLEON
NAPOLEON products are designed with superior components and materials, and are assembled by trained crasmen who
take great pride in their work. The burner and valve assembly are leak tested and test-red at a quality test staon. This
grill has been thoroughly inspected by a qualied technician before packaging and shipping to ensure that you, the cus-
tomer, receive the quality product you expect from NAPOLEON.
We at Napoleon are dedicated to you, “our valued customer.” It is our goal to provide you with the necessary tools for an
unforgeable grilling experience. This manual is provided to assist you in assuring your new grill is assembled, installed,
maintained and cared for properly. It is important to read and understand this enre manual before operang your new
grill to ensure you fully understand all the safety precauons and features your grill has to oer. By carefully following
these instrucons, you will enjoy years of trouble-free grilling. If this product fails to meet your expectaons, for any rea-
son, please call our customer care department at 1-866-820-8686 between 9 AM and 5 PM (Eastern Standard Time) or visit
our Website at www.napoleongrills.com.
“NAPOLEON warrants its products against manufacturing defects to the original purchaser only, provided that the purchase was made through an autho-
rized NAPOLEON dealer and is subject to the following condions and limitaons:”
This factory warranty is non-transferable and may not be extended what-so-ever by any of our representaves.
The gas grill must be installed by a licensed, authorized service technician or contractor. Installaon must be done in accordance with the installaon
instrucons included with the product and all local and naonal building and re codes.
This limited warranty does not cover damages caused by misuse, lack of maintenance, grease res, hosle environments, accident, alteraons, abuse or
neglect and parts installed from other manufacturers will nullify this warranty.
This limited warranty further does not cover any scratches, dents, painted nishes, corrosion or discoloring by heat, abrasive and chemical cleaners, nor
chipping on porcelain enamel parts, nor any components used in the installaon of the gas grill.
Should deterioraon of parts occur to the degree of non-performance within the duraon of the warranted coverage, a replacement part will be provided.
In the rst year only, this warranty extends to the replacement of warranted parts, which are defecve in material or workmanship provided that the prod-
uct has been operated in accordance with the operaon instrucons and under normal condions.
Aer the rst year, with respect to this President’s Limited Lifeme Warranty NAPOLEON may, at its discreon, fully discharge all obligaons with respect to
this warranty by refunding to the original warranted purchaser the wholesale price of any warranted but defecve part(s).
NAPOLEON will not be responsible for the installaon, labor or any other costs or expenses related to the re-installaon of a warranted part, and such
expenses are not covered by this warranty.
Notwithstanding any provision contained in this President’s Limited Lifeme Warranty NAPOLEON’s responsibility under this warranty is dened as above
and it shall not in any event extend to any incidental, consequenal, or indirect damages.
This warranty denes the obligaon and liability of NAPOLEON with respect to the NAPOLEON gas grill and any other warranes expressed or implied with
respect to this product, its components or accessories are excluded.
NAPOLEON neither assumes, nor authorizes any third party to assume, on its behalf, any other liabilies with respect to the sale of this product.
NAPOLEON will not be responsible for: over ring, blow outs caused by environmental condions such as strong winds, or inadequate venlaon,
Any damages to the gas grill due to weather damage, hail, rough handling, damaging chemicals or cleaners will not be the responsibility of NAPOLEON.
The bill of sale or copy will be required together with a serial number and a model number when making any warranty claims from NAPOLEON.
NAPOLEON reserves the right to have its representave inspect any product or part prior to honoring any warranty claim.
NAPOLEON shall not be liable for any transportaon charges, labor costs, or export dues.
3
www.napoleongrills.com
WARNING!
Read the enre instrucon manual before operang the gas grill.•
Under no circumstance should this gas grill be modied.•
Follow lighng instrucons carefully when operang grill.•
Gas must be turned o at the propane cylinder or at the natural gas supply valve when the gas grill is not •
in use.
Keep children and pets away from hot grill, DO NOT allow children to climb inside cabinet.•
Do not leave the grill unaended while in use.•
Do not move grill when hot or operang.•
This gas grill must not be installed in or on recreaonal vehicles and/or boats.•
This gas grill must only be stored outdoors in a well-venlated area and must not be used inside a building, •
garage, screened -in porch or any other enclosed area.
Maintain proper clearance to combusbles (16” to rear of unit 7” to sides). Addional clearance (24”) is •
recommended near vinyl siding or panes of glass.
At all mes keep the venlaon openings of the cylinder enclosure free and clear from debris.•
Do not operate unit under any combusble construcon.•
Do not locate in windy sengs. High winds adversely aect the cooking performance of the gas grill.•
When the gas grill is stored indoors, the propane cylinder must be disconnected from the grill and stored •
outdoors in a well-venlated area, disconnected cylinders must not be stored in a building, garage or other
enclosed area. Natural gas units must be disconnected from the supply when being stored indoors.
Inspect the gas line hose before each use. If there is evidence of excessive abrasion or wear, it must be •
replaced before using the gas grill, with a replacement hose assembly specied by the grill manufacturer.
Never store a spare LP gas cylinder under or near this grill.•
Never ll the cylinder beyond 80 % full.•
Do not aempt to use a cylinder, which is not equipped with a QCC1 type connecon.•
Leak test all connecons before inial use, even if the grill was purchased fully assembled, annually or •
whenever any gas component has been replaced.
Never use natural gas in a unit designed for liquid propane gas.•
Never use lighter uid in a gas grill.•
Use charcoal briquees only with a Napoleon charcoal tray designed for this unit.•
Burner controls must be o when turning supply cylinder on.•
Do not light burners with lid closed.•
Do not operate rear burner with main burners operang.•
The lid is to be closed during the preheat period.•
Do not route hose underneath drip pan-proper hose clearance to boom of unit must be maintained.•
Clean grease tray and sear plates regularly to avoid build-up, which may lead to grease res.•
Remove warming rack before lighng rear burner. The extreme heat will damage the warming rack. •
Ensure sear plates are posioned properly according to sear plate installaon instrucons. •
Do not use side shelves to store lighters, matches or any other combusbles.•
Keep gas line away from heated surfaces•
Keep any electrical supply cord away from water or heated surfaces.•
Inspect infrared burner venturi tube for spider webs and other obstrucons periodically. Clean the tubes •
completely if you nd any such obstrucons.
The outdoor cooking gas grill and its individual shuto valve must be disconnected from the gas supply •
piping system during any pressure tesng of that system at test pressures in excess of 0.5psi (3.5kPa).
The outdoor cooking gas grill must be isolated from the gas supply piping system by closing its individual •
manual shuto valve during any pressure tesng of the gas supply piping system at test pressures equal to
or less than 1/2 psi (3.5 kPa).
4
www.napoleongrills.com
THIS GAS BARBECUE IS CERTIFIED UNDER CANADIAN AND AMERICAN NATIONAL STANDARDS, CAN/cSa-1.6-
2005 AND ANSI Z21.58 -2005 RESPECTIVELY FOR OUTDOOR GAS GRILLS AND SHOULD BE INSTALLED TO
CONFORM WITH LOCAL CODES. In absence of local codes, install to the current CAN/CGA-B149.1 Propane
Installaon Code in Canada or to the Naonal Fuel Gas Code, NFPA54/ANSI Z223.1 in the United States.
If a rosserie motor is used, it must be electrically grounded in accordance with local codes or, in absence of
local codes, with the current CSA C22.1 Canadian electrical code in Canada or the Naonal Electrical Code,
ANSI/NFPA 70 in the United States.
: The burning of gas fuel creates by-products, some of which are on the list as
substances known by the State of California to cause cancer or reproducve harm. When cooking with gas,
always ensure adequate venlaon to the unit, to minimize exposure to such substances.
Propane Cylinder Specicaons
WARNING!
occur.
A dented or rusty cylinder may be hazardous and should be checked by your propane supplier. Never use a
cylinder with a damaged valve. Use only a propane supply cylinder constructed and marked in accordance
with the specicaons for LP-gas cylinders of the Naonal Standard of Canada, CAN/CSA-b339, Cylinders,
Spheres and Tubes for Transportaon of Dangerous Goods; and Commission, as applicable or the Specica-
ons for LP-Gas Cylinders of the U.S. Department of Transportaon (D.O.T.). This appliance has been designed
for use with a 20 lb. (9.1 kg) size propane cylinder only (not supplied).
The propane cylinder must be provided with a cylinder connecon device compable with the connecon
for outdoor cooking appliances. The propane cylinder must be provided with a shut-o valve terminang in
a propane cylinder valve type QCC1, and a safety relief device having direct communicaon with the vapor
space of the cylinder. The cylinder supply system must be arranged for vapor withdrawal and the cylinder
shall include a collar to protect the cylinder valve. The cylinder shall incorporate a listed OPD (overll protec-
on device). Do not store a spare LP-gas cylinder under or near this appliance. Never ll the cylinder beyond
80 percent full.
: Ensure that the gas regulator hose is kink free. Remove the cap or plug from the cylin-
der fuel valve. Insert the black QCC1 regulator nipple onto the QCC1 fuel valve. Hand ghten clockwise. Do
not use tools. Leak test all joints prior to using the barbecue. A leak test must be performed annually, and
each me a cylinder is hooked up, or if a part of the gas system is replaced.
Check that the cylinder valve is closed by turning the knob clockwise.•
Check that the grill’s burner knobs are in the o posion.•
Open cabinet doors.•
Place the cylinder into the tank holder in boom of shelf.•
Posion the cylinder so that the valve faces toward the front of the unit.•
Aach regulator hose. •
WARNING! Use only the pressure regulator and hose assembly provided with this barbecue. Replace-
The regulator supplies a pressure of 11 inches. water column to the gas grill and has a QCC1 type ng. Cyl-
inders to be used with this unit must be supplied with a QCC1 cylinder valve. A QCC1 cylinder has a posive
seang connecon, which will not allow gas ow unl a posive seal has been achieved. It is also equipped
with an excess ow device. In order to aain full ow to the grill, the valves must be in the o posion when
the cylinder valve is turned on.
5
www.napoleongrills.com
WARNING!
WARNING!
property, serious bodily injury, or death.
: This must be done before inial use, annually, and whenever any gas components are replaced
or serviced. Do not smoke while performing this test, and remove all sources of ignion. See Leak Tesng
Diagram for areas to check. Turn all burner controls to the o posion. Turn gas supply valve on.
-
installer.
-
Natural Gas Hook-Up
This natural gas grill is supplied with a 10 supply hose (complete with a quick disconnect) designed for natural
gas and cered for outdoor use. The gas grill is designed to operate at an inlet pressure of 7 inches water
column. Piping and valves upstream of the quick disconnect are not supplied. The installaon must comply
with CAN B149.1 Natural Gas and Propane installaon code in Canada, or to the Naonal Fuel Gas Code, ANSI
Z223.1 in the United States. The gas supply pipe must be sucient to supply this 106,500 BTU/hr gas grill.
The quick disconnect must not be installed in an upward direcon and a readily accessible manual shut-o
valve must be installed upstream of, and as close to, the quick disconnect as is feasible. The ared end of the
hose must be connected to the ng on the end of the ex tube as illustrated in the Natural Gas Hose Aach-
ment diagram. Tighten using two wrenches. (Do not use thread sealer/pipe dope.) These connecons must
be made by a licensed gas installer. Leak test all joints prior to using the gas grill.
WARNING!
The installaon must be performed by a licensed gas er, and all connecons must be leak tested before •
operang the grill.
Do not route hose underneath drip pan.•
Do not route hose between space in boom shelf and back panel.•
Do not route hose over top of back panel.•
Ensure all hose connecons are ghtened using two wrenches. Do not use teon tape or pipe dope on •
any hose connecon.
Ensure the hose does not contact any high temperature surfaces, or it may melt and leak causing a re.•
Do not use enclosure to store excess hose, as there is a greater chance of the hose contacng a hot sur-•
face, it may melt and leak causing a re.
Leak test all the connecons using a soap and water soluon, as per the leak tesng instrucons found in •
the this manual.
6
www.napoleongrills.com
Lights
Burner
Side Burner
Right Centre
Burner
Burner
Rear
Burner
Burner
WARNING! Open lid
WARNING!
Main Tube Burner
Lighng
Rear Burner Lighng
(Rosserie Burner)
Side Burner Lighng
1. Open grill lid. 1. Open grill lid. 1. Open side burner cover.
2. Push and turn any main burner knob
slowly to the ’hi’ posion. This acon will
ignite the pilot ame, which will in turn
light the selected burner. If the pilot lights,
connue to push down on the control knob
unl the burner lights and then release.
2. Remove the warming rack 2. Push and turn the side burner control
knob slowly to the ‘hi’ posion. This
acon will ignite the side burner
3. If the pilot does not ignite, then
immediately turn the control knob back to
the ‘o posion and repeat step 1 several
mes.
3. Push and turn the rosserie burner control
knob slowly to the ‘hi’ posion. This acon
will ignite the pilot ame, which will in turn
light the burner. If the pilot lights, connue to
push down on the burner control knob unl
the burner lights then release.
3. If the burner does not ignite, then
immediately turn the control knob back
to the ‘o’ posion and repeat step 2
several mes.
4. If the pilot and burner will not ignite
within 5 seconds, turn the control knob to
the ‘o’ posion and wait 5 minutes for any
excess gas to dissipate. Either repeat steps
1 and 2 or light with a match.
4. If the burner does not ignite, then
immediately turn the control knob back to the
‘o’ posion and repeat step 2 several mes.
4. If the burner will not ignite within 5
seconds, turn the control knob to the
‘o’ posion and wait 5 minutes for any
excess gas to dissipate. Either repeat
steps 2 and 3 or light with a match.
5. If the burner will not ignite within 5 seconds,
turn the control knob to the ‘o’ posion
And wait 5 minutes for any excess gas to
dissipate. Either repeat steps 2 and 3 or light
with a match.
WARNING!
WARNING!
WARNING!
the lit match down through the grill and sear plate while turning the corresponding
burner valve to high.
Centre
Burner
7
www.napoleongrills.com
: When lit for the rst me, the gas grill emits a slight odor. This is a normal temporary condion
caused by the “burn-in” of internal paints and lubricants used in the manufacturing process and does not occur
again. Simply run the main burners on high for approximately one-half hour.
Main Burner Use: When searing foods, we recommend preheang the grill by operang all main burners
in the high posion with the lid closed for approximately 10 minutes. Food cooked for short periods of me
(sh, vegetables) can be grilled with the lid open. Cooking with the lid closed will ensure higher, more even
temperatures that can reduce cooking me and cook meat more evenly. Food that has a cooking me longer
than 30 minutes, such as roasts, can be cooked indirectly (with the burner lit opposite to the food placement).
When cooking very lean meats, such as chicken breasts or lean pork, the grids can be oiled before pre-heang
to reduce scking. Cooking meat with a high degree of fat content can create are-ups. Either trim the fat or
reduce temperatures to inhibit this. Should a are-up occur, move food away from the ames and reduce the
heat. Leave the lid open. See Your All Season Grill cookbook by Napoleon for more detailed instrucons.
: Place food to be cooked on the grill directly over the heat. This method is generally used for
searing or for foods that do not require prolonged cooking mes such as hamburgers, steaks, chicken pieces,
or vegetables. The food is rst seared to trap-in the juices and avor, and then the temperature is lowered to
nish cooking the food to your preference.
: With one or more burners operang, place food to be cooked on the grill over a burner that
is not operang. The heat circulates around the food, cooking slowly and evenly. Cooking with this method is
much the same as cooking in your oven and is generally used for larger cuts of meats such as roasts, chickens
or turkeys, but can also be used for cooking foods that are prone to are-ups or for smoking foods. Lower tem-
peratures and slower cooking mes result in tender foods.
: The side burner can be used like any stove top burner, for gravies, soups etc.
For best performance, the gas grill should be located with the side burner protected from the wind.
WARNING!
only.
: Follow the Infrared Burner Ignion procedures and operate on high for 5 minutes
with the lid closed or unl the ceramic burners glow red. Place food on the grill(s) and cook according to mes
listed in the Infrared Grilling Chart. Depending upon your taste, connue cooking over infrared burners on
high, medium, or low, turning food frequently, or place food over unlit burners, close lid, and allow the oven
temperature to slowly nish cooking your food.
CAUTION!
prevent burning.
: Remove the warming rack prior to use. Cooking grids should also be removed
if they interfere with the rosserie. The rear burner is designed to be used in conjuncon with the rosserie
kit (included with most rear burner units) available from your dealer. See the rosserie kit assembly instruc-
ons.
To use the counterbalance - remove the rosserie motor from the gas grill. Place the spit with meat being
cooked across the hangers inside the grill. The meat will naturally hang with the heavy side down. Tighten
the counterbalance arm and weight so the arm is facing up. Slide the counterweight in or out to balance the
load and ghten in place. Re-install the motor and begin cooking. Place a metal dish underneath the meat to
collect drippings for basng and naturally delicious gravy. Basng liquid may be added as required. To seal in
juices, rst operate rear burner on high unl brown, then reduce the heat to thoroughly cook foods. Keep the
lid closed for best results. Your roasts and fowl will brown perfectly on the outside and stay moist and tender
on the inside. For example, a 3 pound chicken on the rosserie will be done in approximately 1½ hours on
medium to high. See ‘Your all Season Grill’ cookbook by Napoleon for more detailed instrucons.
WARNING!
thoroughly with warm soapy water and store indoors.
8
www.napoleongrills.com
Most people don’t realize that the heat source we are most familiar with, our sun, warms the earth using
mainly infrared energy. This is a form of electro-magnec energy with a wavelength just greater than the red
end of the visible light spectrum but less than a radio wave. This energy was discovered in 1800 by Sir William
Herschel who dispersed sunlight into its component colors using a prism. He showed that most of the heat in
the beam fell into the spectral region just beyond the red end of the spectrum, where no visible light existed.
Most materials readily absorb infrared energy in a wide range of wavelengths, causing an increase in its tem-
perature. The same phenomenon causes us to feel warmth when we are exposed to sunlight. The infrared rays
from the sun travel through the vacuum of space, through the atmosphere, and penetrate our skin. This causes
increased molecular acvity in the skin, which creates internal fricon and generates heat, allowing us to feel
warmth.
Foods cooked over infrared heat sources are heated by the same principle. Charcoal grilling is our most familiar
choice for infrared cooking. The glowing briquees emit infrared energy to the food being cooked with very
lile drying eect. Any juices or oils that escape from the food drip onto the charcoal and vaporize into smoke
giving the food its delicious grilled taste. The Napoleon infrared burner cooks in the same way. In each burner,
10,000 ports – each with its own ny ame – cause the surface of the ceramic le to glow red. This glow emits
the same type of infrared heat to the food as charcoal, without its hassle or mess. Infrared burners also pro-
vide a more consistently heated area that is far easier to regulate than a charcoal re. For instant searing, the
burners can be set to high, yet they can also be turned down for slower cooking. We all know how dicult that
is on a charcoal re. Tradional gas burners heat the food in a dierent way. The air surrounding the burner is
heated by the combuson process and then rises to the food being cooked. This generates lower grill tem-
peratures that are ideal for more delicate cuisine such as seafood or vegetables, whereas Napoleon’s infrared
burners produce searing heat for juicier, taser steaks, hamburgers and other meats. For cooking mes and
ps refer to the Infrared Grilling Chart.
Food Control Seng Cooking Time Helpful Suggesons
Steak
1 in. thick
High seng 2 min. each side.
High seng 2 min. each side
then medium seng.
High seng 2 min. each side
then medium seng.
4 min. – Rare
6 min. – Medium
8 min. – Well done
When selecng meat for grilling, ask
for marbled fat distribuon. The fat
acts as a natural tenderizer while cook-
ing and keeps it moist and juicy.
Hamburger
1/2 in. thick
High seng 2 min. each side.
High seng 2 1/2 min. each side.
High seng 3 min. each side.
4 min. – Rare
5 min. – Medium
6 min. – Well done
Preparing hamburgers to order is made
easier by varying the thickness of
your paes. To add an exoc taste to
your meat, try adding hickory-avored
woodchips to Napoleon’s woodchip
smoker.
Chicken pieces High seng 2 min. each side.
then medium-low to low seng.
20-25 min. The joint connecng the thigh and the
leg from the skinless side should be
sliced 3/4 of the way though for the
meat to lay aer on the grill. This
helps it to cook faster and more evenly.
To add a trademark taste to your cook-
ing, try adding mesquite-avoured
woodchips to your Napoleon woodchip
smoker.
Pork chops Medium 6 min. per side Trim o the excess fat before grilling.
Choose thicker chops for more tender
results.
Spare ribs High seng for 5 minutes
low to nish
20 min. per side
turn oen
Choose ribs that are lean and meaty.
Grill unl meat easily pulls away from
the bone.
Lamb chops High seng for 5 minutes
medium to nish
15 min. per side Trim o the excess fat before grilling.
Choose extra thick chops for more
tender results.
Hot dogs Medium - Low 4-6 min. Select the larger size wieners. Slit the
skin lengthwise before grilling.
9
www.napoleongrills.com
WARNING!
WARNING!
-
cleaned regularly.
Note: Stainless steel tends to oxidize or stain in the presence of chlorides and suldes, parcularly in coastal
areas and other harsh environments, such as the warm, highly humid atmosphere around pools and hot tubs.
These stains could be perceived as rust, but can be easily removed or prevented. To provide stain prevenon
and removal, wash all stainless steel surfaces every 3-4 weeks or as oen as required with fresh water and/or
stainless steel cleaner.
WARNING!-
: (This must be done by a qualied gas installer.) The air shuer is factory set and
should not need adjusng under normal condions. Under extreme eld condions, adjustments might be
required. When the air shuer is adjusted correctly the ames will be dark blue, pped with light blue and
occasionally yellow.
With too lile air ow to the burner, the ames are lazy yellow and can produce soot.•
With too much air ow, the ames li erracally and can cause dicules when lighng.•
Adjusng the air shuer:
1. Remove cooking grids and sear plates and leave lid open.
2. Loosen air-shuer lock screw located at the mouth of the burner and open or close air shuer as required.
The normal opening sengs are:
Main Tube Burner Propane 5/32” (4mm)
Natural 5/32” (4mm)
*Infra-Red burners have no air adjustment.
3. Light the burners and set to high. Visually inspect burner ames. When the shuers are set correctly, turn
burners o, ghten locking screws, and replace removed parts. Ensure that the insect screens are installed.
Light Blue
Yellow Tipping
Dark Blue
Burner
Burner Port
Approximately
1/2” (13mm)
10
www.napoleongrills.com
Tube Burner: The burners are made from heavy wall 304 stainless steel, but extreme heat and a corrosive
environment can cause surface corrosion to occur. This can be removed with a brass wire brush.
CAUTION!
Spiders and insects are aracted to the smell of propane and natural gas. The burner is equipped with an
insect screen on the air shuer, which reduces the likelihood of insects building nests inside the burner but
does not enrely eliminate the problem. A nest or web can cause the burner to burn with a so yellow or
orange ame or cause a re (ashback) at the air shuer beneath the control panel. To clean the inside of
the burner, it must be removed from the gas grill: Remove the screw that aaches the burner to the back
wall. Slide the burner back and upwards to remove. Cleaning: Use a exible venturi tube brush to clean the
inside of the burner. Shake any loose debris from the burner through the gas inlet. Check the burner ports
and valve orices for blockages. Burner ports can close over me due to cooking debris and corrosion, use
an opened paperclip or the supplied port maintenance bit to clean them. Drill out blocked ports using this
drill bit in a small cordless drill. The ports are easier to clean if the burner is removed from the grill, but it can
also be done with the burner installed. Do not ex the drill bit when drilling the ports, as this will cause the
drill bit to break. This drill is for burner ports only, not for the brass orices (jets) which regulate the ow into
the burner. Take care not to enlarge the holes. Ensure the insect screen is clean, ght, and free of any lint or
other debris.
: Reverse the procedure to reinstall the burner. Check that the valve enters the burner when
installing.
: The grids and warming rack are best cleaned with a brass wire brush during the pre-
heang period. Steel wool can be used for stubborn stains. It is normal that stainless grids (if equipped) will
discolor permanently from regular usage due to the high temperature of the cooking surface.
Control Panel: The control panel text is printed directly on the stainless steel and with proper maintenance will
remain dark and legible. To clean the panel, use only warm soapy water or Connental brand stainless steel
cleaner available from your Napoleon dealer. Never apply abrasive cleaners on any stainless surfaces, espe-
cially the printed poron of the control panel or the prinng will gradually rub o.
Cleaning Inside The Gas Grill: Remove the cooking grids. Use a brass wire brush to clean loose debris from
the casng sides and underneath the lid. Scrape the sear plates with a puy knife or scraper, and use a wire
brush to remove the ash. Remove the sear plates and brush debris from the burners with the brass wire brush.
Sweep all debris from inside the gas grill into the drip pan.
Drip Pan: Accumulated grease is a re hazard. Clean the drip pan frequently (every 4 – 5 uses or as oen as
required) to avoid grease buildup. Grease and excess drippings pass through to the drip pan, located beneath
the gas grill and accumulate in the disposable grease tray below the drip pan. To clean, slide the drip pan free
of the grill. Never line the drip pan with aluminum foil, sand or any other material as this could prevent the
grease from owing properly. The pan should be scraped out with a puy knife or scraper, and all the debris
brushed into the disposable grease tray. Replace this tray every 2 – 4 weeks, depending on gas grill usage. For
supplies, see your Napoleon Gas Grill dealer.
: Do not use abrasive cleaners or steel wool on any painted, porcelain or stain-
less steel parts of your Napoleon Grill. Doing so will scratch the nish. Exterior grill surfaces should be cleaned
with warm soapy water while the metal is sll warm to the touch. To clean stainless surfaces, use a stainless
steel or a non-abrasive cleaner. Always wipe in the direcon of the grain. Over me, stainless steel parts
discolor when heated, usually to a golden or brown hue. This discoloraon is normal and does not aect the
performance of the grill. Porcelain enamel components must be handled with addional care. The baked-on
enamel nish is glass-like, and will chip if struck. Touch-up enamel is available from your Napoleon Grill dealer.
WARNING!
installer.
WARNING!
occur.
11
www.napoleongrills.com
Problem Possible Causes
Low heat / Low ame
when valve turned to
high.
For propane - improper lighng procedure.
For natural gas - undersized supply line.
For both gases - improper preheang.
Ensure lighng procedure is followed
carefully. All gas grill valves must be in the
o posion when the tank valve is turned
on. Turn tank on slowly to allow pressure
to equalize. See lighng instrucons.
Pipe must be sized according to
installaon code.
Preheat grill with both main burners on
high for 10 to 15 minutes.
Excessive are-ups/
uneven heat.
Sear plates installed incorrectly.
Improper preheang.
Excessive grease and ash build on sear plates
and in drip pan.
Ensure sear plates are installed with the
holes towards the front and the slots on
the boom. See assembly instrucons.
Preheat grill with both main burners on
high for 10 to 15 minutes.
Clean sear plates and drip pan regularly.
Do not line pan with aluminum foil. Refer
to cleaning instrucons.
: The infrared burners of your grill are designed to provide a long service life,
though care must taken to prevent cracking of their ceramic surfaces. Fractures will cause the burners to
malfuncon. The following provides a few of the causes of cracks and the steps you can take to avoid them.
Damage caused by failure to follow these steps is not covered by your grill warranty.
1. Impact with hard objects - Never allow hard objects to strike the ceramic. Take care when inserng or re-
moving cooking grates and accessories into or from the grill.
2. Contact with water or other liquids - Cold liquids contacng the hot ceramic surfaces can cause them to
break. Never throw water into the grill to douse a ame. If the ceramic or interior of a burner becomes wet
while not in use, later operaon of the burner can create steam, which can produce sucient pressure to crack
the ceramic. Repeated soaking of the ceramic can also cause it to swell and expand. This expansion causes
undue pressure on the ceramic that can cause it to crack and crumble.
i) Never throw water into the grill to control are-ups.
ii) Do not aempt to operate the infrared burners in open air while raining.
iii) If you nd standing water in your grill (because of exposure to rainfall, sprinklers, etc.), inspect the
ceramic for evidence of possible watersoaking. If the ceramic appears to be wet, remove the burner from the
grill. Turn it upside down to drain the excess water and bring indoors to dry thoroughly.
3. Impaired venlaon of hot air from the grill - For the burners to funcon properly, hot air must have a way
to escape the grill. If the hot air is not allowed to escape, the burners can become deprived of oxygen causing
them to back-ash. If this occurs repeatedly, the ceramic could crack. Never cover more than 75% of the cook-
ing surface with solid metal (i.e., griddle or large pan).
4. Incorrect cleaning - Do not clean the ceramic le with a wire brush. If debris is collecng on your burner,
light the burner and operate on high for 5 minutes with the lid open, allowing debris to burn o.
: Because of the high intensity of the infrared burner, most drippings and food parcles that
fall onto the burner surface are immediately incinerated. However, some debris and residue may remain. To
remove this residue aer cooking, turn the grill on high with lid closed for 5-10 minutes. Do not clean the ce-
ramic le with a wire brush. If debris is collecng on your burner, simply light the burner and operate on high
for 5 minutes with the lid open, allowing debris to burn o. If the back burner is not used oen, grease splat-
ter from main burner grilling will eventually block the ports. Once a month, the back burner should be red
for 5-10 minutes to burn o the accumulated grease.
12
www.napoleongrills.com
Problem Possible Causes
Burners burn with yellow
ame, accompanied by
the smell of gas.
Possible spider web or other debris, or
improper air shuer adjustment.
Thoroughly clean burner by removing.
See general maintenance instrucons.
Open air shuer slightly according to
combuson air adjustment instrucons.
(This must be done by a qualied gas
installer.)
Flames li away from
burner, accompanied
by the smell of gas, and
possibly dicules in
lighng.
Improper air shuer adjustment. Close air shuer slightly according to
combuson air adjustment instrucons.
(This must be done by a qualied gas
installer.)
Humming regulator. Normal occurrence on hot days. This is not a defect. It is caused by internal
vibraons in the regulator and does not
aect the performance or safety of the
gas grill. Humming regulators will not be
replaced.
Burners will not cross
light each other.
Plugged ports at back of burner. Clean burner ports. See burner
maintenance instrucons.
“Paint” appears to be
peeling inside lid or hood.
Grease build-up on inside surfaces. This is not a defect. The nish on the lid
and hood is porcelain, and will not peel.
The peeling is caused by hardened grease,
which dries into paint-like shards, that
ake o. Regular cleaning will prevent this.
See cleaning instrucons.
Infrared burner (if
equipped) ashes back
(during operaon the
burner abruptly makes
a loud “whoosh” sound,
followed by a connuous
blow-torch type sound
and grows dim.)
Ceramic les overloaded with grease drippings
and build-up. Ports are clogged.
Burner overheated due to inadequate
venlaon (too much grill surface covered by
griddle or pan.)
Cracked ceramic le.
Leaking gasket surrounding the ceramic le, or
a weld failure in the burner housing.
Turn burner o and allow to cool for at
least two minutes. Relight burner and
burn on high for at least ve minutes or
unl the ceramic les are evenly glowing
red.
Ensure that no more than 75% of the
grill surface is covered by objects or
accessories. Turn burner o and allow to
cool for at least two minutes, then relight.
Allow burner to cool and inspect very
closely for cracks. If any cracks are found,
contact your authorized Napoleon dealer
to order a replacement burner assembly.
Contact your authorized Napoleon dealer
for instrucons on ordering a replacement
burner assembly.
13
www.napoleongrills.com
KEEP YOUR RECEIPT AS PROOF OF PURCHASE TO VALIDATE YOUR WARRANTY.
Ordering Replacement Parts
Warranty Informaon
MODEL:
DATE OF PURCHASE:
SERIAL NUMBER:
(Record informaon here for easy reference)
Before contacng the Customer Care Department, check the NAC Website for more extensive cleaning, main-
tenance, troubleshoong and parts replacement instrucons at www.napoleongrills.com. Contact the factory
directly for replacement parts and warranty claims. Our Customer Care Department is available between 9
AM and 5 PM (Eastern Standard Time) at 1-866-820-8686 or fax at 1-705-727-4282. To process a claim, we
must be provided with the following informaon:
1. Model and serial number of the unit.
2. Part number and descripon.
3. A concise descripon of the problem (‘broken’ is not sucient).
4. Proof of purchase (photocopy of the invoice).
In some cases the Customer Care Representave could request to have the parts returned to the factory for
inspecon before providing replacement parts. These parts must be shipped prepaid to the aenon of the
Customer Care Department with the following informaon enclosed:
1. Model and serial number of the unit.
2. A concise descripon of the problem (‘broken’ is not sucient).
3. Proof of purchase (photocopy of the invoice).
4. Return Authorizaon Number - provided by the Customer Care Representave.
Before contacng customer care, please note that the following items are not covered by the warranty:
Costs for transportaon, brokerage or export dues. •
Labor costs for removal and reinstallaon.•
Costs for service calls to diagnose problems.•
Discoloraon of stainless steel parts.•
Part failure due to lack of cleaning and maintenance, or use of improper cleaners (oven cleaner).•
14
www.napoleongrills.com
CAUTION!
Geng Started
Remove all cart panels, hardware, and grill head from carton. Raise lid and remove any components 1.
packed inside. Use the parts list to ensure all necessary parts are included.
Do not destroy packaging unl the grill has been fully assembled and operates to your sasfacon.2.
Assemble the grill where it is to be used, lay down cardboard or a towel to protect parts from being lost or 3.
damaged while assembling.
Most stainless steel parts are supplied with a protecve plasc coang that must be removed prior to us-4.
ing grill.
Follow all instrucons in the order that they are laid out in this manual.5.
Two people are required to li the grill head onto the assembled cart. 6.
call our Customer Care Department at 1-866-820-8686 between 9 AM and 5 PM (Eastern Standard Time).
Flat and Philips
screwdrivers
Pliers
3/8 (10mm)
Wrench,
ratchet or driver
Hammer
TOOLS REQUIRED FOR ASSEMBLY (tools not included)
15
www.napoleongrills.com
Aach (4) casters, using (4) ¼ -20 x 3/8” screws and (4) ¼ -20 lock nuts for each caster. Aach brackets under front casters
as illustrated. Tighten securely.
Snap magnets into slots in front of boom shelf and bushings into either end.
2 X N430-0002
16 X N570-0073 (1/4-20 X 3/8”)
3/8”(10mm)
7/16”(11mm)
16 X N450-0027 (1/4-20)
2 X N105-0011
non relvolvin
16
www.napoleongrills.com
Propane Only
4 x N570-0080 (#14 x 1/2”)
3/8”(10mm)
Insert propane tank ring into slots in boom of shelf as shown. Fold tabs over to secure in place.
Install end cart panels ensuring slots in panel are to the top, rest panel on boom shelf and line up holes. Fasten using (4)
x 1/2” screws.
17
www.napoleongrills.com
6 x N570-0080 (#14 x 1/2”)
3/8”(10mm)
Fit rear cart panel between the two end panels; ensure large hole in panel is to the boom right corner as illustrated.
Fasten using (6) #14 x 1/2” screws, three on each side.
Rotate basket slightly to allow wire to enter the holes in the side panel. Push through and upwards, rotang to allow the
bend in the wire to pass through the holes. Lay basket at against the side panel. Clip top propane tank mount into slots in
back panel. Insert one end at a me, gently bending wire. (When not in use tank mount will lay at against back panel).
Propane Only
18
www.napoleongrills.com
Place complete drawer housing assembly onto boom shelf. Line up holes in housing with holes in boom shelf. Fasten
using (4) #14 x 1/2” screws.
4 x N570-0080 (#14 x 1/2”)
3/8”(10mm)
19
www.napoleongrills.com
2 x N570-0080 (#14 x 1/2”)
3/8”(10mm)
6 x N570-0080 (#14 x 1/2”)
Fasten top rail assembly to the front of side panels and the top of the drawer housing assembly using (6) #14 x 1/2” screws.
For ease of installaon, start all screws before ghtening completely.
3/8”(10mm)
Aach propane tank heat shield above propane tank ring using (2) #14 x 1/2” screws. Aach one end under lip of back
panel and other end to underside of front cabinet support.
Propane Only
20
www.napoleongrills.com
4 x N570-0073 (1/4-20 X 3/8”)
3/8”(10mm)
PROPANE ONLY – To avoid assembly dicules, prior to mounng the grill head, remove zip e holding regulator up under
control panel. This was installed at the factory to protect the regulator hose during shipping and is no longer required.
(Take care when removing the e not to damage the hose). Ensure the regulator drops into the small opening, between the
tank heat shield and the right side of the cabinet.
Li grill head and place on assembled cart, lining up holes in top of side cart panels with holes in boom of base. Fasten
from inside using (4) 1/4-20 x 3/8” screws, two per side.
Correct Assembly
Incorrect Assembly
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
NAPOLEON M730RSBI-2 Le manuel du propriétaire
- Catégorie
- Barbecues
- Taper
- Le manuel du propriétaire
- Ce manuel convient également à
dans d''autres langues
- English: NAPOLEON M730RSBI-2 Owner's manual