NEC MultiSync® FE700BK Manuel utilisateur

Marque: NEC

Modèle: MultiSync® FE700BK

Taper: Manuel utilisateur

MultiSync FE700

User's Manual

100

Declaration

Declaration of the Manufacturer

We hereby certify that the color monitors

MultiSync FE700 (JC-17W01)

is in compliance with

Council Directive 73/23/EEC:

- EN 60950

Council Directive 89/336/EEC:

- EN 55022

- EN 60555-2

- EN 61000-3-3

- EN 50082-1

(IEC 801-2)

(IEC 801-3)

(IEC 801-4)

and marked with

NEC Home Electronics, Ltd.

686-1, NISHIOI OI-MACHI

ASHIGARAKAMI-GUN

KANAGAWA 258-8533, JAPAN

100

Safety Instruction

Caution:

When operating the FE700 with a 220-240V AC power source in Europe

except UK, use the power cord provided with the monitor.

In UK, a BS approved power cord with moulded plug has a Black (five

Amps) fuse installed for use with this equipment. If a power cord is not

supplied with this equipment please contact your supplier.

When operating the FE700 with a 220-240V AC power source in

Australia, use the power cord provided with the monitor.

For all other cases, use a power cord that matches the AC voltage of the

power outlet and has been approved by and complies with the safety

standard of your particular country.

ENERGY STAR

Product

As an ENERGY STAR Partner, NEC Technologies has determined that this

product meets the E

NERGY STAR guidelines for energy efficiency. The

NERGY STAR emblem does not represent EPA endorsement of any product

or service.

IBM is registered trademark of International Business Machines Corporation.

Apple and Macintosh are registered trademarks of Apple Computer Inc.

Microsoft and Windows are registered trademarks of the Microsoft Corporation.

NERGY STAR is a U.S. registered trademark.

NEC is a registered trademark of NEC Corporation.

ErgoDesign is a registered trademarks of NEC Home Electronics, Ltd. in U.K., Germany, France, Spain, Italy, Denmark,

Norway, Sweden and Benelux.

IPM, OSM, ColorControl, OptiClear, GlobalSync, EdgeLock and Advanced Digital Control System are trademarks of

NEC Home Electronics, Ltd.

MultiSync is a registered trademark of NEC Technologies, Inc in U.S. and of NEC Home Electronics, Ltd in Canada, U.K.,

Germany, France, Spain, Italy, Austria, Benelux, Switzerland, Denmark, Finland, Norway and Saudi Arabia.

All other trademarks or registered trademarks are property of their respective owners.

100

TCO’99

Congratulations!

You have just purchased a TCO'99 approved

and labelled product! Your choice has

provided you with a product developed for

professional use. Your purchase has also

contributed to reducing the burden on the

environment and also to the further

development of environmentally adapted

electronics products.

Why do we have environmentally labelled

computers?

In many countries, environmental labelling has become an established

method for encouraging the adaptation of goods and services to the

environment. The main problem, as far as computers and other

electronics equipment are concerned, is that environmentally harmful

substances are used both in the products and during their manufacture.

Since it is not so far possible to satisfactorily recycle the majority of

electronics equipment, most of these potentially damaging substances

sooner or later enter nature.

There are also other characteristics of a computer, such as energy

consumption levels, that are important from the viewpoints of both the

work (internal) and natural (external) environments. Since all methods of

electricity generation have a negative effect on the environment (e.g.

acidic and climate-influencing emissions, radioactive waste), it is vital to

save energy. Electronics equipment in offices is often left running

continuously and thereby consumes a lot of energy.

What does labelling involve?

This product meets the requirements for the TCO'99 scheme which

provides for international and environmental labelling of personal

computers. The labelling scheme was developed as a joint effort by the

TCO (The Swedish Confederation of Professional Employees), Svenska

Naturskyddsforeningen (The Swedish Society for Nature Conservation)

and Statens Energimyndighet (The Swedish National Energy

Administration).

Approval requirements cover a wide range of issues: environment,

ergonomics, usability, emission of electric and magnetic fields, energy

consumption and electrical and fire safety.

100

The environmental demands impose restrictions on the presence and use

of heavy metals, brominated and chlorinated flame retardants, CFCs

(freons) and chlorinated solvents, among other things. The product must

be prepared for recycling and the manufacturer is obliged to have an

environmental policy which must be adhered to in each country where

the company implements its operational policy.

The energy requirements include a demand that the computer and/or

display, after a certain period of inactivity, shall reduce its power

consumption to a lower level in one or more stages. The length of time to

reactivate the computer shall be reasonable for the user.

Labelled products must meet strict environmental demands, for example,

in respect of the reduction of electric and magnetic fields, physical and

visual ergonomics and good usability.

Below you will find a brief summary of the environmental requirements

met by this product. The complete environmental criteria document may

be ordered from:

TCO Development

SE-114 94 Stockholm, Sweden

Fax: +46 8 782 92 07

Email (Internet): [email protected]

Current information regarding TCO'99 approved and labelled products

may also be obtained via the Internet, using the address:

http://www.tco-info.com/

Environmental requirements

Flame retardants

Flame retardants are present in printed circuit boards, cables, wires,

casings and housings. Their purpose is to prevent, or at least to delay the

spread of fire. Up to 30% of the plastic in a computer casing can consist

of flame retardant substances. Most flame retardants contain bromine or

chloride, and those flame retardants are chemically related to another

group of environmental toxins, PCBs. Both the flame retardants

containing bromine or chloride and the PCBs are suspected of giving rise

to severe health effects, including reproductive damage in fish-eating

birds and mammals, due to the bio-accumulative* processes. Flame

retardants have been found in human blood and researchers fear that

disturbances in foetus development may occur.

100

The relevant TCO'99 demand requires that plastic components weighing

more than 25 grams must not contain flame retardants with organically

bound bromine or chlorine. Flame retardants are allowed in the printed

circuit boards since no substitutes are available.

Cadmium**

Cadmium is present in rechargeable batteries and in the

colour-generating layers of certain computer displays. Cadmium

damages the nervous system and is toxic in high doses. The relevant

TCO'99 requirement states that batteries, the colour-generating layers of

display screens and the electrical or electronics components must not

contain any cadmium.

Mercury**

Mercury is sometimes found in batteries, relays and switches. It damages

the nervous system and is toxic in high doses. The relevant TCO'99

requirement states that batteries may not contain any mercury. It also

demands that mercury is not present in any of the electrical or electronics

components associated with the labelled unit.

CFCs (freons)

The relevant TCO'99 requirement states that neither CFCs nor HCFCs

may be used during the manufacture and assembly of the product. CFCs

(freons) are sometimes used for washing printed circuit boards. CFCs

break down ozone and thereby damage the ozone layer in the

stratosphere, causing increased reception on earth of ultraviolet light with

e.g. increased risks of skin cancer (malignant melanoma) as a

consequence.

Lead**

Lead can be found in picture tubes, display screens, solders and

capacitors. Lead damages the nervous system and in higher doses, causes

lead poisoning. The relevant TCO'99 requirement permits the inclusion of

lead since no replacement has yet been developed.

* Bio-accumulative is defined as substances which accumulate within

living organisms

** Lead, Cadmium and Mercury are heavy metals which are

Bio-accumulative.

100

English

Deutsch

Français

Español

Italiano

100

English

100

Contents

MultiSync FE700 (JC-17W01) monitor box* should contain

the following:

• MultiSync FE700 Monitor with tilt/swivel base

• Power cord

• Captive Signal Cable

• User’s manual

* Remember to save your original box and packing material to transport

or ship the monitor.

User's

manual

Captive Signal

Cable

Power cord

E-1

100

Quick Start

To attach the MultiSync FE700 monitor to your system,

follow these instructions:

1. Turn off the power to your computer and MultiSync monitor.

2. If necessary, install the display card. For more information, refer to the

display card manual.

3. For the PC: Connect the

15-pin mini D-SUB of the

captive signal cable to the

connector of the display

card in your system (Figure

A.1). Tighten all screws.

For the Mac: Connect the

Macintosh Cable Adapter

(not included) to the

monitor connector on the

Macintosh (Figure B.1).

Attach the 15-pin mini

D-SUB end of the captive

signal cable to the

Macintosh cable adapter

on the computer (Figure

B.1). Tighten all screws.

Captive Signal Cable

15-pin mini D-SUB

Figure A.1

Captive Signal Cable

15-pin

mini D-SUB

Mac Adapter

(not included)

Computer

Figure B.1

E-2

100

4. Connect one end of the power

cord to the MultiSync FE700

monitor and the other end to the

power outlet (Figure C.1).

5. Turn on the monitor (Figure D.1) and the computer.

6. This completes the installation.

NOTE: If you have any problems, please refer to the Troubleshooting

section of this User's Manual.

Power

Cord

Power Outlet

Figure C.1

Power Button

Figure D.1

E-3

100

Controls

OSM(On-Screen Manager) control buttons on the front of

the monitor function as follows:

Main Menu Sub-Menu

EXIT

Exits the OSM menu. Exits to the OSM main menu.

CONTROL

▲/▼

Moves the highlighted area

up/down to select one of the

controls.

Moves the highlighted area

up/down to select one of the

controls.

CONTROL

-/+

Moves highlighted area

left/right to select one of the

controls.

Moves the bar in the - or +

direction to decrease or

increase the adjustment.

PROCEED

Has no function . Only executes control or enters

sub, sub-menu.

RESET

Resets all the controls within

the highlighted menu to the

factory setting.

Resets the highlighted control

to the factory setting.

NOTE: When RESET is pressed in the main and sub-menu, a warning

window will appear allowing you to cancel the reset function.

When OSM controls are activated, icons are displayed at the top of the

menu. If an arrow (→) is displayed in a sub-menu, it indicates further

choices are available. To enter a sub, sub-menu, press PROCEED.

ab Brightness/Contrast Controls

BRIGHTNESS: Adjusts the overall image and background screen brightness.

CONTRAST: Adjusts the image brightness in relation to the background.

DEGAUSS: Eliminates the build-up of stray magnetic fields which alter

the correct scan of the electron beams and affect the purity of the screen

colours, focus, and convergence. When activated, your screen image will

jump and waver a bit as the screen is demagnetized.

Caution: Please allow a minimum of 20 minutes to elapse between uses

of the Degauss function.

de Size and Position Controls

LEFT/RIGHT: Moves the image horizontally (left or right).

DOWN/UP: Moves the image vertically (up or down).

NARROW/WIDE: Decreases or increases the horizontal size of the image.

SHORT/TALL: Decreases or increases the vertical size of the image.

E-4

100

x Color Control

Color Presets 1 through 5, selects the desired color setting. The bar is

replaced by the color setting choice from 1 to 5. Each color setting is

adjusted at the factory to the stated Kelvin. If a setting is adjusted, the

name of the setting will change from Kelvin to Custom.

RED, GREEN, BLUE: Decreases or increases red, green, or blue

depending upon which is selected. The change in color will appear on

screen and the direction (decrease or increase) will be shown by the bars.

pq Geometry Controls

The Geometry controls allow you to adjust the curvature or angle of the

sides of your display.

IN/OUT (pincushion): Decreases or increases the curvature of the sides

either inward or outward.

LEFT/RIGHT (pincushion balance): Decreases or increases the

curvature of the sides either to the left or right.

TILT (parallelogram): Decreases or increases the tilt of the sides either

to the left or right.

ALIGN (trapezoidal): Decreases or increases the bottom of the screen

to be the same as the top.

ROTATE (raster rotation): Rotates the entire display clockwise or

counter clockwise.

? Tools 1

MOIRÉ CANCELER: Moiré is a wavy pattern which can sometimes appear

on the screen. The pattern is repetitive and superimposed as rippled

images. When running certain applications, the wavy pattern is more

evident than in others. To reduce moiré, adjust the Level by using the –/+

CONTROL buttons.

E-5

100

LINEARITY: The Linearity selection allows you to adjust the spacing of the

areas on the screen. The purpose of this control is to ensure that a 2 cm

circle is a true 2 cm circle wherever it is drawn on the screen. The best

way to determine the vertical linearity is as follows:

• Draw equally spaced horizontal lines using a drawing application that

has a ruler.

• Use the Vertical Balance control to adjust the lines near the top and

bottom of your screen.

• Use the Vertical control to adjust the spacing between the lines near

the centre and top of your screen.

FACTORY PRESET: Selecting Factory Preset allows you to reset most OSM

settings back to the factory settings. A warning statement will appear to

confirm that you do want to reset ALL settings. Individual settings can be

reset by highlighting the control to be reset and pressing the RESET button.

? Tools 2

LANGUAGE: OSM menus are available in 7 languages.

OSM TURN OFF: The OSM menu will stay on as long as it is in use. In

the OSM Turn Off sub-menu, you can select how long the monitor waits

after the last touch of a button to shut off the OSM menu. The preset

choices are 10, 20, 30, 60, 120 seconds.

OSM LOCK OUT: This control completely locks out access to all OSM

functions except brightness and contrast controls. When attempting to

activate OSM while in the lockout mode, a screen will appear indicating

that OSM controls are locked out. To activate the OSM Lockout function,

press PROCEED, then press “▲” and hold down simultaneously. To

de-activate the OSM Lockout, press PROCEED, then press “▲” and hold

down simultaneously.

IPM System Off Mode:

ENABLE: The IPM works normally, all stages of

the energy saving are used.

DISABLE: The OFF MODE of the IPM is not used.

NOTE: For standard computers and display cards you should keep

the factory setting ENABLE.

REFRESH NOTIFIER: A message will advise you if the refresh rate of the

signal being applied to the monitor by the computer is too low. For

further information, please refer to your display card or system manual.

Factory setting is OFF .

E-6

100

z Information

Provides you with additional information which includes the following:

DISPLAY MODE: Indicates the current mode and frequency setting of the

monitor.

MONITOR INFO: Indicates the model name and the serial number.

E-7

100

Recommended use

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE

FOLLOWING WHEN SETTING UP AND USING

THE MULTISYNC FE700 COLOR MONITOR:

• DO NOT OPEN THE MONITOR. There are no user serviceable parts

inside and opening or removing covers may expose you to dangerous

shock hazards or other risks. Refer all servicing to qualified service

personnel.

• Use the monitor in a clean, dry area.

• Do not spill any liquids into the cabinet or use your monitor near water.

• Do not insert objects of any kind into the cabinet slots, as they may

touch dangerous voltage points, which can be harmful or fatal or may

cause electric shock, fire or equipment failure.

• Do not place any heavy objects on the power cord. Damage to the cord

may cause shock or fire.

• Do not place this product on a sloping or unstable cart, stand or table,

as the monitor may fall, causing serious damage to the monitor.

• Keep the monitor away from high capacity transformers, electric motors

and other devices such as external speakers or fans, which may create

strong magnetic fields.

• If possible, position the monitor so that it is facing the east to minimize

the effects of the earth’s magnetic field.

• Changing the direction of the monitor while it is powered on may cause

image discoloration. To correct this, turn the monitor off for 20 minutes

before powering it back on.

• To separate the equipment from the power source you have to remove

the plug from the inlet socket.

• When operating the MultiSync FE700 with its AC 220-240V worldwide

power supply, use a power supply cord that matches the power supply

voltage of the AC power outlet being used. The power supply cord you

use must have been approved by and comply with the safety standards

of your country. (Type H05VV-F should be used except in UK)

• In UK, use a BS-approved power cord with molded plug having a black

(5A) fuse installed for use with this monitor. If a power cord is not

supplied with this monitor, please contact your supplier.

Immediately unplug your monitor from the wall outlet and refer servicing

to qualified service personnel under the following conditions:

• When the power supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into the monitor.

E-8

100

• If the monitor has been exposed to rain or water.

• If the monitor has been dropped or the cabinet damaged.

• If the monitor does not operate normally by following operating

instructions.

• Allow adequate ventilation around the monitor so that

heat can properly dissipate. Do not block ventilated

openings or place the monitor near a radiator or other

heat sources. Do not put anything on top of monitor.

• The power cable connector is the primary means of

detaching the system from the power supply. The

monitor should be installed close to a power outlet

which is easily accessible.

• Handle with care when transporting. Save packaging

for transporting.

CORRECT PLACEMENT AND ADJUSTMENT OF THE

MONITOR CAN REDUCE EYE, SHOULDER AND

NECK FATIGUE. CHECK THE FOLLOWING WHEN

YOU POSITION THE MONITOR:

• Adjust the monitor height so that the

top of the screen is at or slightly

below eye level. Your eyes should

look slightly downward when viewing

the middle of the screen.

• Position your monitor no closer than

40 cm and no further away than

60 cm from your eyes. The optimal

distance is 50 cm.

• Rest your eyes periodically by

focusing on an object at least 6 m

away. Blink often.

• Position the monitor at a 90° angle to

windows and other light sources to

minimize glare and reflections. Adjust the monitor tilt so that ceiling

lights do not reflect on your screen.

• If reflected light makes it hard for you to see your screen, use an

anti-glare filter.

• Clean your monitor regularly. Use a lint-free, non-abrasive cloth and a

non-alcohol, neutral, non-abrasive cleaning solution or glass cleaner to

minimize dust.

CAUTION

E-9

100

• Adjust the monitor’s brightness and contrast controls to enhance

readability.

• Use a document holder placed close to the screen.

• Position whatever you are looking at most of the time (the screen or

reference material) directly in front of you to minimize turning your

head while you are typing.

• Get regular eye checkups.

Ergonomics

To realize the maximum ergonomics benefits, we recommend the

following:

• Adjust the Brightness until the background raster disappears

• Do not position the Contrast controls to its maximum setting

• Use the preset Size and Position controls with standard signals

• Use the preset Color Setting and Sides Left/Right controls

• Use non-interlaced signals with a vertical refresh rate between

75-120 Hz

• Do not use primary color blue on a dark background, as it is difficult to

see and may produce eye fatigue due to insufficient contrast

E - 10

100

Specifications

Monitor

Specifications

MultiSync FE700

Monitor

Notes

Picture Tube Diagonal:

Viewable Image Size:

Radius:

43 cm (17 inch)

41 cm (16 inch)

50.000 mm

90° deflection, 0,25 mm grille pitch, medium short

persistence phosphor, aperture grille CRT,

multi-layered, anti-staticscreen coating, dark-tint

screen and OptiClear screen.

Input Signal Video:

Sync:

ANALOG 0,7 Vp-p/75 Ω

Separate sync. TTL Level

Horizontal sync. Positive/Negative

Vertical sync. Positive/Negative

Composite sync. (Positive/Negative) (TTL Level)

Display Colors Analog input: Unlimited number of Colors Depends on the display card

Synchronization

Range

Horizontal:

Vertical:

31 kHz to 70 kHz

55 Hz to 120 Hz

Automatically

Resolutions Supported

Resolution based on horizontal and vertical

frequencies only

640 x 480 @ 60 to 120 Hz

800 x 600 @ 55 to 110 Hz

832 x 624 @ 55 to 105 Hz

1024 x 768 @ 55to87Hz...................

1152 x 870 @ 55 to 77 Hz

1280 x 1024 @ 55 to 66 Hz

Some systems may not support all modes listed

NEC cites recommended resolution at 85 Hz for

optimal display performance.

Active Display Area

(Factory setting)

Horizontal:

Vertical:

315 mm

236 mm

Dependent upon signal timing used, and does not

include border area.

Active Display Area

(Full scan)

325 mm

243 mm

Dependent upon signal timing used, and does not

include border area.

Power Supply AC 100-120 V / 220-240 V, 50/60 Hz

Current Rating 1,8 A @ 100-120 V / 1,0 A @ 220-240 V

Dimensions 403 (W) x 427 (H) x 424 (D) mm

Weight 19,0 kg

Enviromental Considerations

Operating Temperature:

Humidity:

Altitude:

Storrage Temperature:

Humidity:

Altitude:

+10° C to +35° C

30% to 80%

0 to 3.000 m

-20° C to +60° C

10% to 90%

0 to 13.700 m

NOTE: Technical specifications are subject to change without notice.

E - 11

100

Features

Flat Aperture Grille CRT: Delivers an unparalleled viewing experience

with a virtually flat image, eliminating distortion and reducing glare so

that what you see on-screen is what you get on your printed output. The

striped phosphor alignment of the CRT delivers superior vertical definition

with improved brightness for more uniform image contrast.

OptiClear Screen Surface: Reduces reflection and glare and increases

contrast without sacrificing focus level, clarity or brightness. Along with

the flat square technology CRT, a high contrast screen with 0.25 mm

grille pitch delivers crisp, clean text and graphics.

Dual Dynamic Beam Focus: Provides precise, continuous focus

adjustment of the electron beams and optimum image quality, even to

the far edge of the screen.

Color Control System: Allows you to change between five color settings

on your display to match your personal preference.

OSM (On-Screen Manager) Controls: Allow you to quickly and easily

adjust all elements of your screen image via simple to use on-screen menus.

ErgoDesign Features: Enhance human ergonomics to improve the

working environment, protect the health of the user and save money and

is compliant with TCO'99 and MPRII for lower emissions.

Plug and Play: The Microsoft

solution with the Windows

95/98

operating system facilitates setup and installation by allowing the monitor

to send its capabilities (such as screen size and resolutions supported)

directly to your computer, automatically optimizing display performance.

IPM (Intelligent Power Manager) System: Provides innovative

power-saving methods that allow the monitor to shift to a lower power

consumption level when on but not in use, saving your monitor energy

costs, reducing emissions and lowering the air conditioning costs of the

workplace and is compliant with NUTEK, VESA DPMS and EPA ENERGY

STAR

Mode LED Indicator Power Saving

On Green None

Stand By Green Minimum (Quickest Recovery)

Suspend Yellow Moderate (< 15 Watts, Moderate Recovery)

Off (IPM Mode) Orange Maximum (< 5 Watts, Slow Recovery)

Off (Power

Switch, Off)

No Light No Power Used (Fully Off)

E - 12

100

La page charge ...

NEC MultiSync® FE700BK Manuel utilisateur

Marque: NEC

Modèle: MultiSync® FE700BK

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

italiano: NEC MultiSync® FE700BK Manuale utente
English: NEC MultiSync® FE700BK User manual
español: NEC MultiSync® FE700BK Manual de usuario
Deutsch: NEC MultiSync® FE700BK Benutzerhandbuch

NEC MultiSync® FE700BK Manuel utilisateur

NEC MultiSync® FE700BK Manuel utilisateur

dans d''autres langues

Documents connexes