Summit CL66FDOS Manuel utilisateur

Owner’s Manual

Outdoor Models

CL65ROS/CL68ROS: Refrigerator

CL66FDOS : Wine Cooler & Beverage Center

BEFORE USE, PLEASE READ AND FOLLOW

ALL SAFETY RULES AND OPERATING INSTRUCTIONS

Write the Serial Number here:

Felix Storch, Inc.

Summit Appliance Division

770 Garrison Avenue

Bronx, NY10474

www.summitappliance.com

Table of contents

Safety instruction and warnings ........................................................................... 2 - 5

Transporting and unpacking ...................................................................................... 6

Installation instructions .......................................................................................... 7 -9

Before installation of your appliance ................................................................... 7

Tools you will need ............................................................................................. 7

Built-in installation dimensions ............................................................................ 8

Replacing cabinet legs with casters .................................................................... 9

Electrical connection ........................................................................................... 9

Reversing the door (model CL65ROS &CL68ROS) .................................................. 10

Operation ............................................................................................................... 11-13

Operating conditions ........................................................................................ 11

Control elements .............................................................................................. 11

Setting the temperature .................................................................................... 11

Functions .......................................................................................................... 12

Defrosting .......................................................................................................... 12

Shelves ............................................................................................................. 12

Beverage storage (model CL65ROS&CL68ROS) ...................................................... 14

Wine and beverage storage (model CL66FDOS) ..................................................... 14

Cleaning and care ...................................................................................................... 15

Cleaning the appliance ...................................................................................... 15

Moving .............................................................................................................. 15

Energy-saving tips ............................................................................................ 15

Problems with your appliance? ................................................................................ 16

Limited Warranty .................................................................................................. 17-18

Note on Models CL65ROS &CL68ROS&CL66FDOS

These appliances can be used both indoors and outdoors,

and may be installed either built into an enclosure or

free-standing. In any case, to ensure proper operation and

avoid unnecessary wasting of energy, leave enough

clearance around the unit when installing to allow air to

circulate freely.

For details on proper installation, see pages 7-8 .

1

Installing the handle

............................................................................................

1

3

Safety instructions and warnings

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Before the appliance is used, it must be properly positioned and installed as described in this manual.

Therefore, please read the manual carefully.To reduce the risk of fire, electric shock or injury when using the

appliance, follow basic precautions, including the following:

 To prevent injury or damage to the

appliance, the appliance should be

unpacked and set up by two people.

 In the event that the appliance is

damaged on delivery, contact the supplier

immediately before connecting to the

power line.

 To guarantee safe operation, ensure that

the appliance is set up and connected as

described in these operating instructions.

 Disconnect the appliance from the power

source if any fault occurs. Pull out the plug,

switch off or remove the fuse.

 When disconnecting the appliance, pull on

the plug, not on the cable.

 Any repairs and work on the appliance

should only be carried out by the

customer service department, as

unauthorized work could prove highly

dangerous for the user. The same applies

to changing the power cable.

 Do not stand on the base, drawers or

doors or use them to support anything

else.

 Do not allow flames or sources of ignition

to enter the appliance. When transporting

and cleaning the appliance, ensure that

the refrigerant circuit is not damaged. In

the event of damage, make sure that

there are no ignition sources nearby.Keep

the room well ventilated.

 This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities or

lack of experience and knowledge unless

they have been given initial supervision or

instruction concerning use of the

appliance by a person responsible for

their safety. Children should be

supervised to ensure that they do not play

with the appliance.

 Do not store explosives or sprays using

combustible propellants such as butane,

propane, pentane, etc. in the appliance.

Electrical components might cause

leaking gas to ignite. You may identify

such sprays by the printed contents

or a flame symbol.

 Do not use any electrical devices inside

the appliance.

 Before you throw away your old appliance:

Take off the door. Leave the shelves or

drawers in place so that children may not

easily climb inside.

 When disposing of your appliance, please

choose an authorized disposal site.

2

Safety instructions and warnings

Children in the household

DANGER,RISK OF CHILD ENTRAPMENT!

Before you throw away your old appliances:

Take off the door.Leave the shelves in place

so that children may not easily climb inside.

 Never leave packaging materials with

children. There is a danger of poisoning or

suffocation by the cardboard boxes and

plastic sheets!

 This appliance is in no way a toy for

children!

 If you will no longer be using the

appliance, remove the doors and gasket

seals and store in a safe place.In this way

you will avoid the danger of children

becoming trapped inside the appliance.

 Never allow children to operate,play

with,or crawl inside the appliance.

 Child entrapment and suffocation are not

problems of the past.Junked or

abandoned appliances are still

dangerous...even if they will “just sit in the

garage a few days”.

Grounding instructions

 This appliance must be grounded.

 If the power socket of the home system is

not grounded in accordance with the

current legal regulations,connect the

appliance to the grounding lead itself after

consulting a specialized technician.

Do not use an extension cord with this

appliance

 This appliance is equipped with a power

cord having a grounding wire with a

grounding plug. The plug must be plugged

into an outlet that is properly installed and

grounded.

 Consult a qualified electrician or service

technician if the grounding instructions are

not completely understood,or if doubt

exists as to whether the appliance is

properly grounded.

 If the outlet is a standard 2-prong wall

outlet, it is your personal responsibility

and obligation to have it replaced with a

properly grounded 3-prong wall outlet.

 For best operation, plug this appliance

into its own electrical outlet to prevent

flickering of lights, blowing of fuse or

tripping of circuit breaker.

 Do not under any circumstances cut or

remove the third (ground) prong from the

power cord.

 Do not use an adapter plug with this

appliance.

3

IMPORTANT SAFETY INFORMATION

Improper handling can cause serious damage to the appliance and/or injury to the user.

This unit is designed for domestic indoor use only. Do not use the unit for industrial use.

Any other use may invalidate the warranty. Please review the rating label located on the

rear panel of the unit for electrical and other technical data related to this unit. The unit

must be used in a properly grounded wall outlet. Please read and follow the safety

information listed below to reduce the risk of fire, electric shock, or injury.

SAFETY PRECAUTIONS

 Carefully inspect the appliance. If you discover any faults, stop the installation and

contact the vendor.

 In the event that the appliance is damaged on delivery, contact the supplier immediately.

 The packaging material is recyclable and is marked with a recycling symbol. For disposal,

follow the local regulations. Packaging materials (plastic bags, polystyrene parts, etc.)

must be kept out of the reach of children, because they present a possible source of

danger.

 Do not exceed the power outlet recommended ratings.

 It is recommended the appliance be connected on its own, independent circuit.

 The unit must be installed in accordance with Provincial and National electrical codes.

 This appliance is equipped with a grounding plug. The plug must connected into an outlet

that is properly installed and grounded in accordance with the National Electrical Code

and local codes and ordinances is required.

 When disconnecting the appliance, pull on the plug, not the cable.

 Do not use extension cords or power strips with this unit. You may need to contact your

electrician if it is necessary to use a longer cord or if you do not have a grounded outlet.

Do not modify the power cord’s length or share the outlet with other appliances.

 Any repairs and work on the appliance should only be carried out by the customer service

department, as unauthorized work could prove highly dangerous for the user. The same

applies to changing the power cable.

 Component parts shall be replaced with manufacture’s components so as to minimize the

risk of possible ignition due to incorrect parts or improper service.

 Unplug the unit if it is not going to be used for an extended period of time.

 Always turn the unit off and unplug it from the electric outlet when cleaning.

 Use outlets that cannot be turned off by a switch or pull chain.

 Do not start or stop the unit by switching the circuit’s power on and off.

 Never plug or unplug the unit with wet hands.

 Do not stand on the base, drawers or doors or use them to support anything else.

4

 Do not allow flames or sources of ignition to enter the appliance. When transporting and

cleaning the appliance, ensure that the refrigerant circuit is off. In the event of damage,

make sure that there are no ignition sources nearby.

 This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities or lack of experience and knowledge unless they

have been given initial supervision or instruction concerning use of the appliance by a

person responsible for their safety. Children should be supervised to ensure that they do

not play with the appliance.

 Do not store explosives or sprays using combustible propellants such as butane, propane,

pentane, etc., in the appliance.

 Electrical components might cause leaking gas to ignite. You may identify such sprays by

the printed contents or a flame symbol.

 Do not store explosives or sprays using combustible propellants such as butane, propane,

pentane, etc., in the appliance.

 Do not use electrical devices inside the appliance.

 DANGER : before you throw away your old appliance: Take off the door. Leave the parts in

place so that children may not easily climb inside.

 When disposing of your appliance, please choose an authorized disposal site.

 Do not under any circumstances cut or remove or bypass the third (ground) prong from

the power cord.

 Do not locate the appliance in direct sunlight or in a room with a high ambient

temperature, or in the vicinity of any sources of direct heat, such as a radiator or oven.

 To prevent back and other types of injuries, use at least two people to move and install

the appliance.

 Install the wine refrigerator in a well ventilated area.

 The temperature range for this refrigerator is optimized for Perishable food items .

 Do not place hot or warm items into the refrigerator before they cool down to room

temperature.

 Only use in an upright position on a flat, level surface and provide proper ventilation.

 Do not pinch or kink the power supply line between the unit and cabinet.

 Do not place any other appliances on top of the unit.

 Do not turn the unit upside down, on its side, or at an angle off level.

BE CAREFUL WHEN HANDLING, MOVING, AND USING THE APPLIANCE TO AVOID EITHER

DAMAGING THE REFRIGERANT TUBING OR INCREASING THE RISK OF A LEAK.

5

Transporting and unpacking

 If the appliance is transported in a

horizontal position, the oil from the

compressor may leak into the cooling

circuit.For this reason,allow the appliance

to rest in a vertical position for 12 hours

before turning it on, so that the oil flows

back into the compressor.

 Remove the external packaging, remove

the protective plastic film from the surface

of the appliance (if used) and clean the

external parts of the appliance with a

cleaner designed for this purpose. Do not

use steel wool or any coarse agents,

which could irreparably damage the

surface of the appliance. Carefully remove

all papers and adhesive tape from the

appliance, doors and other parts packed

in polystyrene. Remove documents and

accessories from inside the appliance.

 The packaging material is recyclable and

is marked with a recycling symbol. For

disposal, follow the local regulations.

Packaging materials (plastic bags,

polystyrene parts,etc.) present a possible

source of danger and must be kept out of

the reach of children.

 Carefully inspect the appliance. If you

discover any faults, stop the installation

and contact the vendor.

6

Installation instructions

Before installation of your appliance

 The placement of the appliance must meet

the requirements in the section Operating

conditions on page 9 and must include a

stable floor with a load-bearing capacity

corresponding to the weight of the

appliance.

 Level the appliance using the adjustable

feet. Ensure there is a gap between the

bottom edge of the appliance and the

ground, so that there is sufficient

circulation of air. This will ensure the optimal

performance of the cooling system.

 Check whether any coolant circulation

pipes have been damaged during

installation.

 Use the appliance only for the purposes

for which it has been designed.

 The appliance must be located on a rigid

and even surface. In this way you will

ensure free circulation of the coolant and

effective operation of your appliance.

 If possible, place the appliance in a cool,

well-ventilated and dry area.

 Do not locate the appliance in direct

sunlight or in a room with a high ambient

temperature, or in the vicinity of any

sources of direct heat, such as a radiator or

oven. This would cause the compressor to

work harder, resulting in a substantially

higher power consumption level.

FOR YOUR SAFETY

While performing installations described in this section, gloves, safety glasses or

goggles should be worn.

Tools you will need

NOTE: For free standing installation, allow at least 4” of clearance at the back, sides

and top of the unit to permit the proper air circulation to cool the compressor and

condenser. Even for built-in installation, you should provide the following clearances

to ensure the best operation and proper ventilation: 3/16” on both sides, 2” at the

rear and 1/16” at the top.Take care that the air vent at the front of the appliance is

never covered or blocked in any way.

7

Installation instructions

Built-in installation dimensions (mm/in)

If your appliance is to be built-in, use the dimensions in the diagram and chart below as a guide

when installing:

Model CL65ROS&CL68ROS CL66FDOS

A

660mm (26″)

B

610mm (24″)

C

883mm (34 ¾ ″)

D

152mm (6″)

E

51mm (2″)

8

Installation instructions

Notes:

 Unplug the power cord and release the

brake before moving the cabinet.

 Do not put any goods on top of the cabinet

and avoid slanting the cabinet when

moving it.

 Push the cabinet from the rear making

sure the door does not open.

 To avoid short circuits,please do not use

the cabinet in bad weather. Position the

cabinet under a canopy.

 Do not let children climb on the cabinet or

move the cabinet to another location.

 Keep the caster brake in “ON” position

while in desired location.

 Cabinet must be placed on a level surface.

 Cabinet will reach its cooling efficiency

after one hour.

Replacing cabinet legs with casters

a) Tilt the unit on its back on a level surface

and remove the 4 cabinet legs (Fig.3

number 4).

Reserve the cabinet legs.

b) Assemble the casters with brake (Fig. 2)

on the cabinet front bottom and the other 2

casters (Fig. 1)at the cabinet rear bottom.

c) Assemble each caster to the bottom of the

unit with (2)M5x10 screws with a star or

Phillips screwdriver (Fig.3).

d) The caster brake (Fig.3 number 1) at the

front bottom of the cabinet comes with a

braking function. When the brake handle

is “ON” (Fig.2)’ unit wont roll; when brake

handle is “OFF”(released), it will roll.(Fig.2)

Electrical connection

A 115 Volt (AC only) 60 Hz grounded

electrical supply equipped with a 15- or 20-

amp fuse or circuit breaker is required. It is

recommended that a separate circuit serving

only your appliance be provided. Use outlets

that cannot be turned off by a switch or pull

chain. Connect this appliance to a 3-prong

power supply outlet that has a ground

terminal. If you only have a 2-prong outlet,

have it replaced by a qualified technician

with an outlet that meets the local codes. DO

NOT USE AN EXTENSION CORD.

Required nominal voltage and frequency are

indicated on the rating plate. The connection

to the power supply and grounding has to be

made according to current standards and

regulations.

9

Reversing the door (model CL65ROS/CL68ROS )

Model CL65ROS or

CL68ROS has a reversible door but is delivered to you with a right hinged

door. Should you wish to reverse the hinge on your unit, a left-hand hinge kit is included in the

box.

10

Operation

Operating conditions

Proper operation of the appliance

is guaranteed only if the following conditions

are met:

 The temperature in the room where the

appliance is located conforms to the

climate class stated on the appliance’s

rating label.

 Maximum ambient relative humidity:

RH75%.

 The appliance must be placed at a

sufficient distance from heat sources ( e.g.,

ovens, central heating,direct

sunlight,etc.).

 The appliance must be located in such a

place that it is protected against the

effects of weather.

 Regular maintenance is performed

according to the instructions in this user’s

manual.

 The ventilation openings in the cover of

the appliance must not be covered by

anything.

 Correct installation ( e.g., leveling,the

capacity of the system corresponds to the

specifications on the rating label of the

appliance).

Control elements

For Models :

CL65ROS/CL68ROS/CL66FDOS

1) “ ” button

To turn the unit ON and OFF, press and hold

this button for approximately 3 seconds.

2) “ ” button

Energy conservation button:Pressing this

button for 3 seconds will turn the energy

conservation mode on or off. In this mode, the

LED light and display will turn off, and the

C/F light will be on.

3) “ “ indicator light

Shows that the compressor is in operation.

4) “°C/°F” indicator light

The temperature scale is changed by

pressing the C/F button.

5) “ ”button

Used to increase(warm) the temperature in

steps of 1F(or 1C).

6) “ ” button

Used to decrease(cool) the temperature in

steps of 1F(or 1C).

7) “°C/°F”button

Press this button to switch the indicator light

between C andF.

8) LED display

Shows the temperature of the internal cabinet.

Setting the temperature

 Insert the power plug into a properly grounded

power socket.

 Use the / buttons to set the desired

temperature of the appliance. Each time the

/ buttons are pressed,the temperature

will increase / decrease by 1F (or 1C).

 CL65ROS&CL68ROS

You can set the temperature in the range of

36° F to 50° F (or 2° C to 10° C).

 CL66FDOS

You can set the temperature in the range of 39° F

to 64° F (or 4° C to 18° C).

11

Operation

Functions

 Temperature Memory Function

If the power is suddenly lost, the set temperature will

be remembered by the unit and once the power is

back on, the unit will be at the same set

temperature.

 “Close Door” Reminder Function

When you forget to close the door or the door

is not fully closed, there will be a warning alarm

after 5 minutes.

 Temperature Alarm Function

If the inner temperature is higher than 73° F

(23°C),“HI” is shown on the display panel and

the alarm buzzer will sound continuously after one

hour.It informs you that the inner temperature is

too high. Please check for the cause.

If the inner temperature is lower than 32° F(0° C),

“LO” is shown on the display panel; the alarm

buzzer will sound and the malfunction indicator

will light at the same time.

NOTE:If too many bottles are put in at once or the

door has not been closed tightly, the unit will

display the "HI" signal on the display panel.

This is normal. Please wait 5 minutes after you

close the door and “HI” will disappear.

 It is normal that the cabinet shows “HI” or “LO”from

time to time. If it occurs frequently or lasts for a long

time, you can restart the unit by unplugging it. If the

problem occurs once again after restart, please

contact customer service.

 Before reconnecting the power plug into a

socket, wait 3 to 5 minutes. Otherwise you could

damage your appliance. If you attempt to turn on

the appliance before the end of this time delay,

the appliance will not start.

 If you turn on the appliance for the first time or after

a restart, or after it has been out of operation for a

long time, there may be a temperature difference

between the temperature inside the appliance and

on the LED display. This is a normal event caused

by the duration of the activation period. Leave the

appliance turned on for several hours and the

temperatures will stabilize during operation.

Defrosting

There is no need to defrost your appliance

manually since its operation is frost-free.

Shelves

Do not cover racks with aluminum foil or

any other material that will prevent

adequate air circulation within the

cabinet.

 To prevent damaging the door gasket, make sure to

have the door open all the way when pulling

shelves out of the

rail compartment.

 For easy access to the storage contents, you must

pull the shelves approximately 1/3 out of the rail

compartment. Note that this unit was designed with

a notch on each side of the shelf tracks to prevent

bottles from falling.

 When removing any of these shelves from the rail

compartment, you must first disassemble and

remove the plastic posts by removing the lock

screw that holds each post in place. (Fig. A)

 To re-install, ensure the shelf is resting securely on

the support brackets and push shelf inward until it

locks into place.

12

INSTALLING THE HANDLE

To install the handle please follow the below instructions:

1. Pull away the door gasket in the area where the handle is to be installed on the left side as

shown below in Fig .1 . The gasket is easily displaced by hand, no tools are necessary.

2. Align the handle with the screws installed. Tighten the screws using a Phillips head screwdriver

until the handle sets both flush and secured tightly against the door frame. DO NOT over

tighten as this will cause damage to the handle assembly. Fig .2 Replace the door gasket to its

original position.

 Gasket  Phillips Head Screw Driver

Phillips Head Screw  Handle

Fig. #1

Fig. #2

Operation

13

Beverage storage (model CL65ROS&CL68ROS)

 The unit can store a maximum of 123

beverage cans (12 oz) , and 2 gallon-

size milk bottles. See Fig. B for detailed

storage method.

 Location A: each full-size glass shelf can

hold 35 beverage cans (12 oz).

 Location B: smaller glass shelf can hold

28 beverage cans (12 oz).

 Location C: bottom of the unit can hold

13 beverage cans (12 oz).

 Location D: each storage bin can hold

6 beverage cans (12 oz).

 Location E: milk bin can hold two

1-gallon milk bottles or 2-liter beverage

bottles. See Fig. C.

 To allow the unit to hold a 1-gallon milk

bottle, remove the block as shown in Fig.

C. Keep the block in a safe place away

from children.

 To hold a 2-liter beverage bottle, the block

should be put back in place.

Wine and beverage storage (model CL66FDOS)

To achieve the maximum storage capacity

of 21 bottles and 60 beverage cans:

1) Right compartment

Shown in Fig A. This will allow

for the storage of three (3)

750ml bottles per rack .

Total storage capacity:

21 wine bottles.

2) Left compartment

Position the cans on the upper

three shelves as shown in Fig B.

This will allow for the storage

of eighteen (18) 12-oz cans on

each of the top three shelves,

and six (6) cans on the bottom

shelf for a total storage capacity

of 60 beverage cans.

14

Cleaning and care

Cleaning the appliance

 Wipe the internal surfaces of the

appliance with a soft sponge lightly dipped

in a solution of table salt. (Add 2 table-

spoons of salt to a quart of warm water.)

 Wash the shelves in warm water with a

small amount of kitchen dishwashing liquid,

rinse and wipe dry. Allow the wooden

shelves (if the appliance has them) to dry

completely before returning them to the

wine cooler.

 Use a glass cleaner to clean the glass

surfaces and a commercially available

stainless steel cleaning agent for the

stainless steel surfaces.

 All parts that you wash with a soft sponge

lightly dipped in water must be wiped dry.

 Wipe the outer surface with a soft sponge

lightly dipped in a dilute solution of

dishwashing liquid in water. Wipe dry

using a clean cloth.

 Dust and liquids can cause gaskets to

stick to the cabinet and tear when you

open the door.Wash each door gasket

with a mild detergent and warm water.

Rinse and dry thoroughly after cleaning.

 Do not use steel wool or sponges with

steel wool on stainless steel surfaces.

They could damage the surface.

 Do not use cleaning waxes, concentrated

cleaning agents, bleaches or cleaning

products containing kerosene on the

plastic or rubber parts.

 Never use paper towels or window

cleaners on the plastic parts.

Moving

 Before moving the appliance, remove all

contents.

 Secure freely moving parts inside the

appliance (racks), e.g., using adhesive

tape.

 To prevent damage, screw in the leveling

feet.

 Tape the door(s) shut.

 Ensure that the appliance always remains

in a vertical position while being

transported. To prevent the appliance from

being damaged during transportation,

cover it with a blanket or other soft cloth.

Energy-saving tips

 Locate the appliance away from sources

of heat and out of direct sunlight.

 Ensure sufficient ventilation. Under no

circumstances should you cover the

ventilation openings.

 Only open the door when necessary. Do

not leave the door open for a long time or

open the door too often.

 If the appliance will not be used for

several months, remove all items and turn

off the appliance. Clean and dry the

interior thoroughly. To prevent odor and

mold growth, leave the door(s) open

slightly, blocking open if necessary.

Before cleaning the appliance,

disconnect it from the power

source.

15

Problems with your appliance?

You can solve many common appliance problems easily, saving you the cost of a possible

service call.Try the suggestions below to see if you can solve the problem before calling the

servicer.

Troubleshooting guide

Problem Possible cause

Appliance does not operate.

Not plugged in.

The appliance is turned off.

Tripped circuit breaker or blown fuse.

Appliance is not cold enough.

Check the temperature control setting.

External environment may require a higher

setting.

The door is opened too often.

The door is not closed completely.

The door gasket does not seal properly.

Turns on and off frequently.

The room temperature is hotter than normal.

A large amount of contents has been added to

the appliance.

The door is opened too often.

The door is not closed completely.

The temperature control is not set correctly.

The door gasket does not seal properly.

The light does not work.

Not plugged in.

Tripped circuit breaker or blown fuse.

The bulb has burned out.

The light button is OFF. Or Energy

conservation button is on.

Vibrations Check to be sure that the unit is level.

The appliance seems to make too

much noise.

A rattling noise may come from the flow of

the refrigerant, which is normal.

As each cycle ends, you may hear gurgling

sounds caused by the flow of refrigerant in

your appliance.

Contraction and expansion of the inside walls

may cause popping and crackling noises.

The appliance is not level.

The door will not close properly.

The appliance is not level.

The door was reversed and not properly

re-installed.

The gasket is dirty.

The shelves are out of position.

16

Limited Warranty

PARTS AND LABOR WARRANTY INFORMATION

SUMMIT Appliances are manufactured to provide outstanding value, and your satisfaction is our goal on every product.

All SUMMIT major appliances carry a one-year limited warranty on both parts and labor. All refrigerators and freezers

carry an additional four years on the compressor. Certain exclusions may apply.

Certain models (including SUMMIT ranges, wall ovens, and cooktops) are manufactured for us in the U.S. and carry the

manufacturer's warranty (also one year parts and on-site labor).

For details on specific warranty issues, please contact us.

GENERAL PARTS AND LABOR WARRANTY

Summit warrants to the original purchaser of every new unit, the cabinet and all parts thereof, to be free from

defects in material or workmanship under normal and proper use and maintenance service as specified by Summit

and upon proper installation and start-up in accordance with the instruction packet supplied with each Summit

unit. Summit’s obligation under this warranty is limited to a period of 12 months from the date of original

purchase.

Any parts covered under this warranty that are determined by Summit to have been defective, within the above

said period, are limited to the repair or replacement, including labor charges, of defective parts or

assemblies. The labor warranty shall include pre-approved standard straight time labor charges only and

reasonable travel time, as determined by Summit.

COMPRESSOR WARRANTY

In addition to the warranty period stated above, Summit warrants its hermetically sealed compressor to be free

from defects in both material and workmanship, under normal and proper use and maintenance, for a period of 60

months from the date of original purchase. Compressors determined by Summit to have been defective within

this extended time period will, at Summit’s option, be either repaired or replaced with a compressor or compressor

parts of similar design and capacity. The above said extended compressor warranty applies only to hermetically

sealed parts of the compressor and DOES NOT apply to any other parts or components, including, but not limited

to, cabinet, paint finish, temperature control, refrigerant, metering device, driers, motor starting equipment, fan

assembly or any other electrical component, etc.

WARRANTY CLAIMS

All claims for labor or parts must be made directly through Summit. All claims should include model number of the

unit, serial number of the cabinet, proof of purchase, date of installation, and all pertinent information supporting

the existence of the alleged defect. In case of compressor warranty, the compressor model tag must be returned

to Summit along with the above listed information. All claims should be filed within 30 days of completed repair or

the warranty claim could be refused.

THINGS NOT COVERED BY THIS WARRANTY

Summit’s sole obligation under this warranty is limited to either repair or replacement of parts, subject to the

additional limitations below. This warranty neither assumes nor authorizes any person to assume obligations

other than those expressly covered by this warranty.

 NO CONSEQUENTIAL DAMAGES: Summit is not responsible for economic loss; profit loss; or special, direct,

indirect, or consequential damages, including without limitation, losses or damages arising from food or product

spoilage claims whether or not on account of refrigeration failure.

17

 WARRANTY IS NOT TRANSFERRABLE: This warranty is not assignable and applies only in favor of the

original purchaser/user to whom delivered. Any such assignment or transfer shall void the warranties herein

made and shall void all warranties, express or implied, including any warranty of merchantability or fitness for a

particular purpose.

 IMPROPER USE: Summit assumes no liability for parts or labor coverage for component failure or other

damages resulting from improper usage or installation or failure to clean and/or maintain product as set forth in

the warranty packet provided with the unit.

 ALTERATION, NEGLECT, ABUSE, MISUSE, ACCIDENT, DAMAGE DURING TRANSIT OR INSTALLATION,

FIRE, FLOOD, ACTS OF GOD: Summit is not responsible for the repair or replacement of any parts that

Summit determines to have been subjected after the date of manufacture to alteration, neglect, abuse, misuse,

accident, damage during transit or installation, fire, flood, or act of God.

 IMPROPER ELECTRICAL CONNECTIONS: Summit is not responsible for the repair or replacement of failed

or damaged components resulting from electrical power failure, the use of extension cords, low voltage, or

voltage drops to the unit.

 NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE: There

are no other warranties, expressed, implied or statutory, except the parts & labor warranty and the extended

compressor warranty specifically described above. These warranties are exclusive and in lieu of all other

warranties, including implied warranty and merchantability or fitness for a particular purpose. There are no

other warranties which extend beyond the description on the face hereof.

 OUTSIDE CONTIGUOUS UNITED STATES: This warranty does not apply to, and Summit is not

responsible for, any warranty claims made on products sold or used outside the contiguous (48) United

States. To be clear, this warranty excludes the states of Alaska and Hawaii and all off-shore territories.

REQUESTING SERVICE

If you are in need of service, please either fill out a service request on our website, www.summitappliance.com/support,

or call us at 800-932-4267 or 718-893-3900. Please be prepared to give us the following information: your name,

address, phone, email, model, serial, date of purchase, place of purchase, and the problem you are having.

FELIX STORCH, INC.

770 Garrison Avenue

Bronx, NY 10474

Phone: (718) 893-3900

Fax:

www.summitappliance.com

18

Printed in China

(844) 478-8799

WARNING: This product can expose you to chemicals including Nickel

(Metallic) which is known to the Stat

For more information go to

Note: Nickel is a component in all stainless steel and some other metal components.

WARNING: This product can expose you to chemicals including Nickel

(Metallic) which is known to the State of California to cause cancer.

For more information go to

www.P65Warnings.ca.gov

Note: Nickel is a component in all stainless steel and some other metal components.

WARNING: This product can expose you to chemicals including Nickel

e of California to cause cancer.

Note: Nickel is a component in all stainless steel and some other metal components.

Manuel du propriétaire

Modèles pour l’extérieur

CL65ROS / CL68ROS : Réfrigérateur

CL66FDOS : Cabinet-cellier et centre de boissons

AVANT D’UTILISER CET APPAREIL, VEUILLEZ LIRE ET RESPECTER

TOUTES LES RÈGLES DE SÉCURITÉ ET INSTRUCTIONS D’UTILISATION

Inscrivez le numéro de série ici :

Felix Storch, Inc.

Summit Appliance Division

770 Garrison Avenue

Bronx, NY 10474

www.summitappliance.com

La page est en cours de chargement...

Summit CL66FDOS Manuel utilisateur

Summit CL66FDOS Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents