Blodgett BC-20E Mode d'emploi

BCĆ20E

COMBINATION OVEN STEAMER

INSTALLATION - OPERATION - MAINTENANCE

BCĆ20E

COMBIĆFOUR/ÉTUVE À VAPEUR

MANUEL D'INSTALLATION - FONCTIONNEMENT - ENTRETIEN

BLODGETT COMBI

www.blodgett.com

44 Lakeside Avenue, Burlington, Vermont 05401 USA Telephone (800) 331Ć5842, (802) 860Ć3700 Fax: (802)864Ć0183

PN 53455 Rev C (8/10)

E 2010 - Blodgett Combi

A PERSONAL WORD FROM BLODGETT COMBI

QUELQUES MOTS DE BLODGETT COMBI

Congratulations on your purchase of a BLODGETT Combi appliance. We

firmly believe that your choice has been a wise one, and trust you will reĆ

ceive many years of excellent service from your new Combi.

You will find that cooking with Combi appliances saves time, labor and

extensive cleaning of both the kitchen and the unit.

With Combi appliances the quality, taste, consistency, and look of your

food are improved, thus endorsing the policy to which we've always adĆ

hered: For Better Cooking!"

Once you've had a chance to use your Combi, please tell us, your dealer

and colleagues about any creative and interesting applications you have

discovered; exchange ideas with other users. Be sure to advise us or

your dealer immediately should any mechanical or technical problems

be encountered (...we're here to help!) and above all Enjoy Cooking the

BLODGETT Combi Way!

For information on cooking, please refer to our separate cooking guide.

Toutes nos félicitations sur votre achat d'appareil de Blodgett Combi.

Nous croyons fermement que votre choix est un choix raisonnable et

nous sommes certains que vous obtiendrez de nombreuses années

d'excellent service de votre nouveau four multiĆusages.

Vous allez découvrir que la cuisson dans les appareils Combi économise

le temps, le travail et le degré de nettoyage de l'appareil aussi bien que

de la cuisine.

Avec les appareil de Combi, la qualité, le goût, la consistence et l'apparĆ

ence des aliments sont améliorés, s'accordant, de ce fait, avec notre

politique "Pour une meilleure cuisson !"

Une fois que vous aurez eu la chance d'utiliser notre Combi, informez

nous, votre concessionnaire et vos collègues, de toutes les applications

nouvelles et intéressantes que vous avez découvertes ; échangez vos

idées avec d'autres utilisateurs. N'hésitez pas à nous prévenir, ou votre

concessionnaire, de tout problème mécanique ou technique que vous

pourriez rencontrer (... nous sommes ici pour vous aider) et parĆdessus

tout RégalezĆvous à cuisiner à la façon BLODGETT Combi!

Pour obtenir de plus amples informations sur l'art culinaire, veuillez conĆ

sulter notre livre de cuisine séparé.

IMPORTANT

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors or liquids in the vicinity

of this or any other appliance.

AVERTISSEMENT

Ne pas entreposer ni utiliser de l'essence ni d'autres vapeurs ou liquides inflamĆ

mables dans le voisinage de cet appariel, ni de tout autre appareil.

WARNING: IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR

MAINTENANCE CAN CAUSE PROPERTY DAMAGE, INJURY OR DEATH. READ THE

INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS THOROUGHLY

BEFORE INSTALLING OR SERVICING THIS EQUIPMENT

AVERTISSEMENT: UNE INSTALLATION, UN AJUSTEMENT, UNE ALTÉRATION, UN

SERVICE OU UN ENTRETIEN NON CONFORME AUX NORMES PEUT CAUSER DES

DOMMAGES À LA PROPRIÉTE, DES BLESSURES OU LA MORT. LISEZ ATTENTIVEĆ

MENT LES DIRECTIVES D'INSTALLATION, D'OPÉRATION ET D'ENTRETIEN AVANT

DE FAIRE L'INSTALLATION OU L'ENTRETIEN DE CET ÉQUIPEMENT.

The information contained in this manual is important for the proper installation,

use, and maintenance of this oven. Adherence to these procedures and instrucĆ

tions will result in satisfactory baking results and long, trouble free service.

Please read this manual carefully and retain it for future reference.

Les informations données dans le présent manuel sont importantes pour installer,

utiliser et entretenir correctement ce four. Le respect de ces instructions et procéĆ

dures permettra d'obtenir de bons résultats de cuisson et une longue durée de serĆ

vice sans problèmes. Veuillez lire le présent manuel et le conserver pour pouvoir

vous y reporter à l'avenir.

Errors: Descriptive, typographic or pictorial errors are subject to correction. SpecificaĆ

tions are subject to change without notice.

Erreurs:Les erreurs de description, de typographie ou d'illustration font l'objet de

corrections. Les caractéristiques sont sujettes à modifications sans préavis.

Your Service Agency's Address:

Adresse de votre agence de service:

Model/Modèl:

Serial Number/Numéro de série:

Your oven was installed by/

Installateur de votre four:

Your oven's installation was checked by/

Contrôleur de l'installation de votre four:

Table of Contents/Table des Matières

Introduction

The Blodgett CombiĆOven/Steamer 2. . . . .

Description of the CombiĆOven/Steamer 3.

Oven Features 4. . . . . . . . . . . . . . . . . . . . . . .

Installation

Owner's Responsibilities 5. . . . . . . . . . . . . . .

Location and Ventilation 6. . . . . . . . . . . . . . .

Agency Approvals 7. . . . . . . . . . . . . . . . . . . .

Plumbing Connections 8. . . . . . . . . . . . . . . .

Electrical Connections 9. . . . . . . . . . . . . . . .

Final Check and Adjustments 10. . . . . . . . . .

Final Check Lists 11. . . . . . . . . . . . . . . . . . . . .

Operation

Safety Information 13. . . . . . . . . . . . . . . . . . . .

Heat Controls 14. . . . . . . . . . . . . . . . . . . . . . . .

Optional MenuSelectt Control 15. . . . . . . . . .

Maintenance

Spray Bottle Operating Procedure 21. . . . . .

Cleaning and Preventive Maintenance 22. . .

Deliming 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Introduction

Le fourĆétuveur Combi de Blodgett 26. . . . . .

Description de le fourĆétuveur Combi de

Blodgett 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Caractéristiques 28. . . . . . . . . . . . . . . . . . . . . .

Installation

Responsabilités du propriétaire 29. . . . . . . . .

Placement et Ventilation 30. . . . . . . . . . . . . .

Normes et Codes 31. . . . . . . . . . . . . . . . . . . . .

Raccordement de la plomberie 32. . . . . . . . .

Raccordement à l'électricité 33. . . . . . . . . . . .

Vérification finale et derniers réglages 34. . .

Vérifications Finales 35. . . . . . . . . . . . . . . . . . .

Fonctionnement

Renseignements sur la sécurité 37. . . . . . . .

Commandes du Chaleur 38. . . . . . . . . . . . . .

Commande MenuSelectt 39. . . . . . . . . . . . . .

Entretien

Procédure de fonctionnement du

pulvérisateur 47. . . . . . . . . . . . . . . . . . . . . . . . .

Nettoyage et entretien préventif 48. . . . . . . .

Détartrage 50. . . . . . . . . . . . . . . . . . . . . . . . . . .

Introduction

2

The Blodgett CombiĆOven/Steamer

The Blodgett CombiĆOven/Steamer offers a comĆ

pletely new method of cooking. With the Oven/

Steamer you have the choice of two cooking proĆ

cesses: Steam and Hot Air, either...

D Separately

D Combined, or

D In Sequence

And for easy operation you can choose from three

modes:

In the Steam mode you can:

steam reheat reconstitute

stew thaw simmer

blanch preserve braise

poach

In the Hot Air mode you can:

roast bake

grill gratinate

broil

In the Combination, Steam, and Hot Air mode

you can:

defrost roast rethermalize

reheat bake forced steaming

You āācan also āāuse āātwo āāor āthree functions in seĆ

quence during one cooking process. We call this:

D combiĆsteaming

D combiĆroasting

D combiĆbaking

The combination of circulating hot air and steam

in the space saving, high performance CombiĆ

Oven/Steamer leads to improvements in the folĆ

lowing areas:

D increased productivity in the kitchen

D a reduction in capital expenditures for multiple

equipment replacement

D a wider range of menu choices

D a simplified cleaning process

The work process is simplified since products are

prepared on or in steam table āpans āand trays.

Food can be cooked, stored, and transported with

āthe āsame āāpans. āSmall āamounts of product can be

processed efficiently; preĆcooked and conveĆ

nience foods can be reheated within minutes.

āMany frozen foods can be processed without preĆ

thawing. This flexibility in preparation reduces the

need for kettles and steam tables since there is no

need for large amounts of food to be kept warm for

long periods of time.

Today the improvement of food quality is more imĆ

portant than ever. Vegetables are cooked in the

Blodgett CombiĆOven/Steamer without water at

the optimal temperature of just under 100_C

(212_F), maintaining valuable vitamins, minerals,

nutrients and trace elements. Cooking meat in the

Combi results in less shrinkage and a firmer, juicier

product. The Blodgett CombiĆOven/Steamer is

being used more and more for baking. Steam and

Hot āAir āmodes āmake āit āa āgeneral āpurpose baking

appliance.

Introduction

3

Description of the CombiĆOven/Steamer

ABOUT THE OVEN/STEAMER

Blodgett CombiĆOven/Steamers are quality proĆ

duced using highĆgrade stainless steel with first

class workmanship.

The two speed fan, which is guarded against acciĆ

dental finger contact, is driven by a quiet and powĆ

erful motor. The condenser draws out excess

steam from the appliance. Condensation and

waste water, which result during steaming and

cleaning, are continuously drained.

The use of high quality insulation impedes excesĆ

sive heat radiation and saves energy.

The high performance fresh steam generator with

its control system makes it possible to enjoy all of

the advantages of a high quality steamer at the

flick of a switch. Fresh steam enters the oven cavĆ

ity without pressure and is circulated at high

speed. This process enables quick and gentle

cooking and ensures high quality food while proĆ

viding convenient working methods. The steam

generator is completely automatic and protected

from running dry.

OVEN/STEAMER OPERATION

The practical oven door, with a viewing window,

has a wide swing radius and handle which can be

operated easily, even with wet or greasy hands.

Ease of operation is guaranteed through the simĆ

ple arrangement of the controls. Graphic symbols

make the appliance easy for even inexperienced

kitchen staff to operate. Steam, Hot Air and Combi

modes can be selected with one switch. The

Steam On Demand feature allows the operator to

add steam at any time for up to 8 minutes while opĆ

erating in either the hot air or Combi modes. This

feature is excellent for baking as well as roasting

operations. A fourth function on the mode selecĆ

tion switch, the Cool Down mode, allows the oven

cavity to cool down rapidly with the door opened.

The steam on demand function allows the operaĆ

tor the ability to introduce steam into the cooking

process at any time.

Cleaning is kept to a minimum. The interior is

sprayed with a selfĆacting cleaning solution which

interacts with steam to easily remove crusts and

stains. The oven is designed for easy care and is

welded water tight so that the internal cooking

cavity may be rinsed with a hose after the steam

cleaning process.

Introduction

4

Oven Features

1

2

3

5

4

6

Figure 1

1 Control Panel

2 Oven Door

3 Door Handle

4 VentĂ(not shown)

5 Deliming Inlet

6 Sealing Plate (used to preheat oven withĆ

out rollĆin cart)

Installation

5

Owner's Responsibilities

1. Oven(s) are uncrated and put in place.

2. The owner/operator must have the following

plumbing, gas and electrical requirements

met and installed.

NOTE: Refer to the Utility Connection inforĆ

mation provided.

WARNING!!

Improper installation, adjustment, alterĆ

ation service or maintenance can cause

property damage, injury or death. Read

the installation, operation and mainteĆ

nance instruction thoroughly before inĆ

stalling or servicing this equipment.

ELECTRICAL - BCĆ20E

Electrical 61kw

Amp/Line (max)

Volt 3 Phase 1 Phase

208 170 N/A

240 147 N/A

480 74 N/A

By Mode

Steam 45kw

y

Hot Air 60kw

Combi 60kw

Blower Motor 1/2 hp

PLUMBING - BCĆ20E

Water

Water Pressure (min/max) 40 PSI min/50 PSI max

Hot & Cold Water Connection 3/4" Hose Fitting, 3/8" ID hose minimum

Pressure Regulator Setting 35 PSI Preset

Minimum Requirements TDS - less than 100 parts per million

Total Hardness - 80Ć120 parts per million

Chlorides -less than 30 parts per million

pH Factor - 7.0Ć8.0

Chlorine - 0 parts per million

Drainage Atmospheric Vented Drain

Drain Connection 2"

Avg Water Drain Temp. 122_F (50_C)

Installation

6

Location and Ventilation

LOCATION

The well planned and proper placement of your

appliance will result in long term operator conveĆ

nience and satisfactory performance.

The following clearances must be maintained beĆ

tween the unit and any combustible or nonĆcomĆ

bustible construction.

BCĆ20E

D Right side of unit - 1" (2.5 cm)

D Left side of unit - 4" (10 cm)

D Back of unit - 6" (15 cm)

The following clearances are recommended, but

not required, for servicing.

D Left side of unit - 12" (30 cm)

D Back of unit - 12" (30 cm)

Place the unit in an area which is free of drafts and

accessible for proper operation and servicing.

Keep the operating area free and clear of all comĆ

bustibles such as paper, cardboard, and flamĆ

mable liquids and solvents.

DO NOT place the unit on a curb base or seal to

the wall; either condition will prevent proper ventiĆ

lation to the blower motors. Slight unevenness can

be corrected with the adjustable legs.

Heat sources should not be located near the air

vents on the left hand side of the unit. Consult the

factory for an optional protective side heat shield

kit, P/N R9050, if a warm surface or water source

is to the left of the unit.

Tripping the blower motor's thermal overload deĆ

vice indicates an excessive ambient temperature

on the side of the oven. This must be corrected to

prevent permanent damage to the oven. All motor

bearings are permanently lubricated by the manĆ

ufacturer; there is no need for additional lubricaĆ

tion during the operational lifetime of the motors.

VENTILATION

The necessity for a properly designed and inĆ

stalled ventilation system cannot be over emphaĆ

sized. The ventilation system will allow the unit to

function properly while removing unwanted vaĆ

pors and products of combustion from the operatĆ

ing area.

The appliance must be vented with a properly deĆ

signed mechanically driven exhaust hood. The

hood should be sized to completely cover the

equipment plus an overhang of at least 6" (15 cm)

on all sides not adjacent to a wall. The capacity of

the hood should be sized appropriately and proviĆ

sions made for adequate makeup air.

WARNING!!

Failure to properly vent the oven can be

hazardous to the health of the operator;

and will result in operational problems,

unsatisfactory baking, and possible damĆ

age to the equipment. Damage sustained

as a direct result of improper ventilation

will not be covered by the Manufacturer's

warranty.

When installed in the Commonwealth of MassaĆ

chusetts, this appliance must be interlocked with

the hood exhaust system so that the appliance

may be operated only when the hood exhaust sysĆ

tem is running.

U.S. and Canadian Installations

Refer to your local ventilation codes. In the abĆ

sence of local codes, refer to the National ventilaĆ

tion code titled, Standard for the Installation of

Equipment for the Removal of Smoke and Grease

Laden Vapors from Commercial Cooking EquipĆ

ment", NFPAĆ96Ć Latest Edition.

General Export Installations

Installation must conform with Local and National

installation standards. Local installation codes

and/or requirements may vary. If you have any

questions regarding the proper installation and/or

operation of your unit, please contact your local

distributor. If you do not have a local distributor,

please call Blodgett Combi at 0011Ć802Ć860Ć3700.

Installation

7

Agency Approvals

THE INSTALLATION INSTRUCTIONS CONĆ

TAINED HEREIN ARE FOR THE USE OF QUALIĆ

FIED INSTALLATION AND SERVICE PERSONNEL

ONLY. INSTALLATION OR SERVICE BY OTHER

THAN QUALIFIED PERSONNEL MAY RESULT IN

DAMAGE TO THE OVEN AND/OR INJURY TO

THE OPERATOR.

Qualified installation personnel are individuals, a

firm, a corporation, or a company which either in

person or through a representative are engaged

in, and are responsible for:

D The installation or replacement of gas piping.

The connection, installation, repair or servicing

of equipment.

D The installation of electrical wiring from the elecĆ

tric meter, main control box or service outlet to

the electric appliance.

Qualified installation personnel must be experiĆ

enced in such work, be familiar with all precauĆ

tions required and have complied with all requireĆ

ments of state or local authorities having

jurisdiction.

U.S. and Canadian Installations

Installation must conform with local codes, or in

the absence of local codes, with the National Fuel

Gas Code, NFPA54/ANSI Z223.1-Latest Edition,

the Natural Gas and Propane Installation Code

CAN/CSAĆB149.1.

Reference: National Electrical Code, ANSI/NFPA

70-Latest Edition and/or Canadian Electrical

Code CSA C22.1 as applicable.

This equipment is to be installed in compliance

with the Basic Plumbing Code of the Building OffiĆ

cials and Code Administrators International Inc.

(BOCA) and the Food Service Sanitation Manual of

the Food and Drug Administration (FDA).

Appliance is to be installed with backflow prevenĆ

tion in accordance with applicable federal, provĆ

ince and local codes.

General Export Installations

Installation must conform with Local and National

installation standards. Local installation codes

and/or requirements may vary. If you have any

questions regarding the proper installation and/or

operation of your unit, please contact your local

distributor. If you do not have a local distributor,

please call Blodgett Combi at 0011Ć802Ć860Ć3700.

Installation

8

Plumbing Connections

WATER CONNECTION

NOTE: Hot water maximizes steam production

but is not required. Cold water may be

supplied to both inlets if hot water is not

available.

BCĆ20E - Connect the appliance to quality cold waĆ

ter via a pressure hose with 3/4" (1/9 cm) couplings.

Cold water is connected to the left solenoid/presĆ

sure regulator as viewed from the rear of the oven.

Hot water connection, right solenoid/pressure reguĆ

lator, to the boiler is recommended. A shut off valve

must be provided adjacent to the oven.

NOTE: Hot water must not be applied to the cold

water inlet.

1/2" Appliance Hose

With 3/4" Hose Fittings

Figure 2

WARNING!!

The use of poor quality water will invaliĆ

date your warranty.

This product must be installed by a licensed

Plumber or Gas Fitter when installed within the

Commonwealth of Massachusetts.

DRAIN CONNECTION

A 2" (5 cm) copper pipe with standard drain pitch

must be run to an open drain or connected to a

standpipe equipped with a vent.

NOTE: The waste water can also be directed to a

nearby floor drain. Flexible hose which alĆ

lows trapped water to accumulate in

sagged runs must be avoided.

1. Find the drain connection on the lower rear of

the unit.

2. Loosen the coupling clamps. Attach a 2" (5

cm) copper drain pipe to the drain connection.

Retighten the coupling clamps.

NOTE: The open end of the drain should be inĆ

stalled facing the floor. Copper line, used

for installation to an open drain or floor

sink, must be supplied by the installer. Use

of a trap inline will cause drain backup.

2" Drain

Customer

Supplied

To Drain

Oven

Drain

Figure 3

Specific water/drain connection for City of Los

Angeles

1. Each drain line from the appliance shall be

routed without dips or sags to terminate above

the flood level rim of an approved indirect waste

receptor.

2. The appliance shall be installed in accordance

with the manufacturer's printed instructions

and the LAPC and LAMC, 1999 editions.

3. A backflow protection device may be required

by local codes. If so, install on the potable water

system directly ahead of the appliance. The

backflow protection device shall be any of the

following: an approved pressure type vacuum

breaker installed at least 12" above the highest

point of use, a double check valve backflow preĆ

venter or a reduced pressure principal backflow

preventer.

Installation

9

Electrical Connections

Before making any electrical connections to these

units, check that the power supply is adequate for

the voltage, amperage, and phase requirements

stated on the rating name plate mounted on the

right side of the unit.

Wiring diagrams are located on the inside of the

removable side panel.

NOTE: DISCONNECT THE POWER SUPPLY TO

THE UNIT BEFORE SERVICING!

U.S. and Canadian installation

All units, when installed, must be electrically

grounded in accordance with local codes or in the

absence of local codes, with the National Electrical

Code, ANSI/NFPA 70-Latest Edition and/or CanaĆ

dian Electrical Code CSA C22.1 as applicable.

General Export Installations

Installation must conform with Local and National

installation standards. Local installation codes

and/or requirements may vary. If you have any

questions regarding the proper installation and/or

operation of your unit, please contact your local

distributor. If you do not have a local distributor,

please call Blodgett Combi at 0011Ć802Ć860Ć3700.

WARNING!!

Improper electrical installation will invaliĆ

date your warranty.

WARNING!!

If the supply cord is damaged, it must be

replaced by a special cord or assembly

available from the manufacturer or its serĆ

vice agent.

Installation

10

Final Check and Adjustments

BEFORE SWITCHING THE APPLIANCE ON

Before applying power to the unit for the first time,

check for the following conditions:

j The unit is level.

j All āelectricalā safety provisions have been adĆ

hered to and the electrical connections are

correct.

j Water is connected, turned on and all of the

connections are water tight.

j Grease filters are in their proper positions

j The transport cart is inserted into the cooking

cavity. When the cart is not inserted into the unit,

water can spill onto the floor causing it to beĆ

come slippery. If the door will not close properly,

use the following adjustment procedure.

DOOR ADJUSTMENT

The hinges may be adjusted using the following

procedure:

1. Adjust the top hinge plate by loosening the

three mounting bolts on the top right corner of

the unit.

2. Adjust the bottom hinge pin by loosening the

mounting bolt located under the bottom hinge

plate on the lower right corner of the oven.

3. Adjustā the hinges āso āthatā the door back and

the unit face are parallel.

4. Tighten the bolts so that there is no further

movement.

5. The āadjustment āis ācorrect āwhen āthe ādoor closes

firmly and no steam leaks from the gasket.

The hinges can also be adjusted as follows:

1. Adjust the door catch by loosening the four

mounting screws located on the inside surĆ

face of the oven door.

2. The āadjustment āis ācorrect āwhen no steam

leaks from the gasket. DO NOT over comĆ

press the door gasket. When closed the door

should slightly compress the door gasket.

Oven

Door

Oven

Door

Figure 4

Installation

11

Final Check Lists

WARNING!!

Final check list must be performed by a

qualified installer only.

ELECTRICAL CONTROL COMPARTMENT

j Voltage to appliance matches rating plate

PLUMBING FINAL CHECK

j Incoming water pressure within appliance

specification.

j Atmospheric vented drain in place.

j Water solenoid properly bracketed and not

leaking.

j Water feed lines intact without leaks.

j Optional Spray Hose connected properly.

Connect the optional spray hose to the fill soĆ

lenoid as shown.

To

Oven Fill

Manifold

Hose and Spray

Option

Cold Water Supply

Figure 5

Installation

12

Final Check Lists

WARNING!!

Final check list must be performed by a

qualified installer only.

ELECTRICAL CONTROL COMPARTMENT

j Voltage to appliance matches rating plate

PLUMBING FINAL CHECK

j Incoming water pressure within appliance

specification.

j Atmospheric vented drain in place.

j Water feed lines intact without leaks.

j Ensure proper clearance.

j Delime system has been primed.

OVEN OPERATIONAL TESTS

NOTE: Checks to be made by customer or authoĆ

rized service agent.

Cool Down Mode

j Check that the fan runs with the door open.

Steam Mode

Place in STEAM mode and set thermostat to

212_F (100_C). Verify the following:

j Heat demand shuts off at approximately

212_F (100_C).

j Set timer for 1 minute. Press to count

down. Be sure the buzzer sounds when the

time expires.

j Unit produces steam, window fogs, door seal

does not leak.

Combi Mode

Place in COMBI mode, set thermostat to 350_F

(177_C) and verify:

j Heat demandis on.

j Oven is heating.

j Heat demand shuts off at 350_F (177_C) and

oven maintains 350_F (177_C).

j Fan shuts off with door open.

Hot Air Mode

Place in HOT AIR mode and set thermostat to

400_F (204_C) and verify:

j Heat demand is on.

j Oven is heating.

j Heat demand shuts off at 400_F (204_C) and

oven maintains 400_F (204_C).

j Fan shuts off with door open.

Steam On Demand Mode

Place in Hot Air mode. Set Steam On Demand for

1 minute. Press the Steam On Demand button and

verify:

j Steam demand lamp is on.

j Steam demand lamp shuts off after approxiĆ

mately 1 minute.

Fan Speed

j Ensure both fan speeds work.

Operation

13

Safety Information

THE INFORMATION CONTAINED IN THIS SECĆ

TION IS PROVIDED FOR THE USE OF QUALIFIED

OPERATING PERSONNEL. QUALIFIED OPERATĆ

ING PERSONNEL ARE THOSE WHO HAVE

CAREFULLY READ THE INFORMATION CONĆ

TAINED IN THIS MANUAL, ARE FAMILIAR WITH

THE FUNCTIONS OF THE OVEN AND/OR HAVE

HAD PREVIOUS EXPERIENCE WITH THE OPĆ

ERATION OF THE EQUIPMENT DESCRIBED. ADĆ

HERENCE TO THE PROCEDURES RECOMĆ

MENDED HEREIN WILL ASSURE THE

ACHIEVEMENT OF OPTIMUM PERFORMANCE

AND LONG, TROUBLEĆFREE SERVICE.

Please take the time to read the following safety

and operating instructions. They are the key to the

successful operation of your Blodgett Combi apĆ

pliance.

SAFETY TIPS

For your safety read before operating

What to do in the event of a power failure:

D Turn all switches to off.

D DO NOT attempt to operate the appliance until

the power is restored.

NOTE: In the event of a shutĆdown of any kind, alĆ

low a five (5) minute shut off period before

attempting to restart the oven.

General safety tips:

D DO NOT remove the control panel cover unless

the oven is unplugged.

Operation

14

Heat Controls

CONTROLS IDENTIFICATION

1. HEAT CONTROL SWITCH - Used to turn

gas on or off.

2. HEAT ON POSITION - Press the switch into

the I position.

3. HAT OFF POSITION - Press the switch into

the O position.

1

2

3

See View A

Figure 6

Operation

15

Optional MenuSelectt Control

1

4

3

5

6

8

11

18

7

9

10

2

13

21

19

12

14

15

16

17

20

Figure 7

CONTROL DESCRIPTION

1. START/STOP KEY Ć press to start, cancel or

pause the bake

2. COOL DOWN KEY Ć initiates oven cool down

cycle

3. BAKE MORE KEY Ć press at the end of a bake

cycle to add additional bake time in one minĆ

ute increments.

4. DISPLAY Ć displays time or temperature and

other information related to oven function and/

or programming.

5. DIAL Ć used to enter set points, time, and proĆ

grammable settings. Also used to select the

programmed product.

6. TEMP KEY Ć used to set or change the bake

temperature

7. TIME KEY Ć used to set or change the bake

time.

8. COMBI KEY Ć press to enter combi mode

9. STEAM KEY Ć press to enter steam mode

10. HOT AIR KEY Ć press to enter hot air mode

11. RETHERM KEY Ć press to enter retherm

mode, this mode uses steam to reheat frozen

or precooked product. Retherm has a temperĆ

ature limit of 250Ć300_F.

12. STEAM ON DEMAND KEY Ć used to initiate

steam injection cycle

13. PROBE KEY Ć press to use core probe cooking

14. FAN KEY Ć press to select the fan speed

15. PROGRAM KEY Ć press to enter product proĆ

gramming and save programmed settings.

16. ESCAPE KEY Ć press to back up one step durĆ

ing programming

17. MAINTENANCE KEY Ć press to enter manager

programming and save programmed settings

18. ALPHA/NUMERIC KEYPAD Ć used to program

recipes.

19. POWER KEY Ć used to place control in and out

of standby mode.

20. OPTIONAL USB PORT Ć used to upload/

download product recipes

21. CORE PROBE CONNECTION Ć plug core temĆ

perature probe in here when using probe

cooking

Operation

16

MenuSelectt Control

OVEN STARTUP

1. Be sure the gas shutoff switch and/or circuit

breaker switch below the control panel are in

the on position. The display flashes OFF

PRESS POWER KEY TO START.

NOTE: If the real time clock and auto wake up

functions are enabled the display

reads PRESS POWER KEY TO START

AUTO START.

2. Press the POWER KEY (19). The display reads

PREHEAT and the oven heats to the last manuĆ

al set temperature in the hot air mode. The disĆ

play flashes READY / IDLE and the alarm beeps

5 times when the oven is at temperature and

ready to bake.

MANUAL COOKING

1. Turn the DIAL (5) until the display reads

MANUAL.

2. Press the TIME KEY (7). Rotate the dial, or use

the alpha/numeric keypad to enter the desired

bake time. Press the center of the dial to set

the bake time.

NOTE: Time is set in one minute increments

using the dial. To set time in less than

one minute increments use the alpha/

numeric keypad.

3. Press the TEMP KEY (6). Rotate the dial, or

use the alpha/numeric keypad to enter the deĆ

sired bake temperature. Press the center of

the dial to set the bake temperature. The oven

preheats to the new temperature.

NOTE: Temperature is set in 5 degree increĆ

ments using the dial. To set time in less

than 5 degree increments use the alĆ

pha/numeric keypad.

4. Press the desired mode key, combi, steam,

hot air or retherm.

If Combi or Retherm are selected, rotate the

dial, or use the alpha/numeric keypad to enter

the desired percentage of steam.

NOTE: Retherm has a temperature limit of

250Ć300_F.

5. When the display flashes READY / IDLE, open

the door. Load the product.

6. Press the START/STOP KEY (1) to begin the

bake cycle. The timer counts down and the

display alternates between the cooking mode

and the name of the product.

PROGRAMMED COOKING

1. Turn the DIAL (1) until the name of the product

is highlighted. Press the center of the dial to

select. The oven preheats to the programmed

temperature in the correct cooking mode. The

display flashes READY / IDLE and the alarm

beeps 5 times when the oven is at temperaĆ

ture and ready to bake.

2. Open the door. Load the product.

3. Press the START/STOP KEY (1) to begin the

bake cycle. The timer counts down and the

display alternates between the cooking mode

and the name of the product.

PROBE COOKING

1. Press the PROBE key (13) to select the probe

mode. The display reads CORE PROBE

COOK & HOLD. Turn the dial to select either

YES or NO. Press the center of the dial to seĆ

lect.

If YES is selected, Cook & Hold has been enĆ

abled. In the Cook & Hold mode, the oven cavĆ

ity lowers to the product pull temperature as

the product cooks.

If NO is selected, Cook & Hold has not been

enabled the cavity maintains the cook temperĆ

ature.

2. Turn the DIAL to enter the desired product pull

temperature in the display. Press the center of

the dial to save the pull temperature.

3. Press the TEMP KEY (6). Rotate the dial, or

use the alpha/numeric keypad to enter the deĆ

sired bake temperature. Press the center of

the dial to set the bake temperature. The oven

preheats to the new temperature.

NOTE: Temperature is set in 5 degree increĆ

ments using the dial. To set time in less

than 5 degree increments use the alĆ

pha/numeric keypad.

La page charge ...

Blodgett BC-20E Mode d'emploi

Blodgett BC-20E Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents