R03.002_22/04/2016
TECHNICAL FILE
Novocanto® Stainless steel
General features
Material: Stainless steel AISI-304
Length: 2,5 m.l. (8ft2in)
Dimensions:
h: 6, 8, 10, 12, 15 mm.
(1/4, 5/16, 3/8, 1/2, 9/16”)
Packaging: 30 u./box
Finishes: 16- High brightness
88- Brushed
Applications
Technical features and Tests
Page 1 of 2
Alloy
AISI-304
Test of chemical composition of each
batch.
AIMME
Corrosion resistance
Salt spray test
+ 504 hours without variation
UNE 112017:92
AIMME
Materials
Stainless Steel
Novocanto® stainless steel is a prole made of stainless steel AISI-304. All material batches are
tested with the chemical composition test to determine that they fulll with the specication of the
alloy. Stainless steel used in Emac® products has also been tested with salt spray test, exceeding 500
hours of exposition without signs of corrosion.
Stainless steel is a highly durable and resistent material, with an excellent supercial appearance that
does not degrade along the time. The nishes available are high brightness, brushed or the “futura”
range whose covering contains titanium. All the nishes are slightly porous and smooth, making easier
the hygiene of the installation.
Novocanto® Stainless steel is a prole intended to protect and decorate edges in wall ceramic
installations. It can also be installed as a medium-height nish.
It is an ideal product for bathrooms, kitchens, medical clinics, restaurants, etc. Its design is versatile
and is appropriate for homes, ofces, public buildings or facilities with strict cleanliness requirements.
Novocanto® Stainless Steel is a prole with curve section made
of AISI-304 Stainless steel. This prole has been designed for
protection and decoration of vertical edges of ceramic installations.
It is available in high quality nishes as high brightness and brushed.
Novocanto® Stainless steel has complementary pieces which are
available to achieve a perfect nish.
TECHNICAL FILE
R03.002_22/04/2016
You can nd out more information about the technical features of Emac®’s products by downloading
its Technical File in www.emac.es.
If you have any query, please contact our Technical Department in tecnico@emac.es.
Technical information
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Novocanto® Stainless steel
Installation
Page 2 of 2
1
2
3 4
5
Indoors Wall tiling
1. Tile one of the sides of the wall to be tiled. Then, spread a big amount of thin-set mortar on the
other side.
2. Place the prole aligned the corner and press it to let the thin-set mortar pass through the holes
on the anchoring wing.
3. Place tiles along the anchoring wing and continue pressing to get an optimal adhesion.
4. Continue tiling the wall.
5. Finally, clean the leftover material, remove the protective lm if necessary and let dry.
Cleaning and maintenance
The immediate cleaning of the material after its installation is necessary to avoid that remainings of
mortar, concrete or iron particles from wool or tools could cause corrosion.
For indoor applications, you can use water with detergent or liquid soap to remove dirtiness and
possible ngerprints marked on the surface. In high brightness nishes, you can use a glass cleaner.
There are specic cleaners in the markets for stainless steel which clean the material and reduce
possible stains. Whenever you clean stainless steel, ensure you rinse it well and dry totally to prevent
fogging.
Steel wool or similar products, are not recommended because they could scratch the surface and
create pitting corrosion. Pay special attention while using materials containing chlorides, they are not
indicated because could oxidize the material. Hydrochloric acid or iron products in a long contact with
the material are neither recommended. Do not use cleaners for common steel for the cleaning of
stainless steel.
To see the video, capture this
image with your mobile phone
(QR code reader software is
necessary) or click on it.
-
1
-
2
Emac NCX8838 Manuel utilisateur
- Taper
- Manuel utilisateur
dans d''autres langues
- English: Emac NCX8838 User manual