TECHNICAL FILE
R03.002_18/11/2015
Technical information
www.emac.es
You can nd out more information about the technical features of the Emac®’s products by downloa-
ding its Technical Files in www.emac.es.
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Novosepara® 4
Installation
Cleaning and maintenance
Indoors Flooring
Page 2 of 2
It’s necessary the immediate cleaning of the material after its installation to avoid that remainings of
mortar, concrete or iron particles from wool or tool could cause corrosion.
For outdoor applications, such as facades, the rain is an efcient cleaner. Pay special attention to
difcult access areas and be sure you remove all the remainings of dust and the rest of elements. You
can do this cleaning once per month.
For indoor applications, you can use water with detergent or liquid soap to remove dirtiness and
possible ngerprints marked on the surface. In highly brilliant nishes, you can use a glass cleaner.
There are specic cleaners in the markets for stainless steel which clean the material and reduce
possible stains. Whenever you clean stainless steel, ensure you rinse it well and dry totally to prevent
fogging.
Steel wool or similar products, are not recommended because they could scratch the surface and
create pitting corrosion. Pay special attention while using materials containing chlorides, they are not
indicated because could oxidize the material. Hydrochloric acid or iron products in a long contact with
the material are neither recommended. Do not use cleaners for common steel for the cleaning of
Outdoors
1. Spread a big amount of thin-set mortar on the surface to be tiled.
2. Do the tiling and leave the gap to install Novosepara 4
3. Fill the gap with adhesive and insert the prole until it is ush to the oor
4. Finally, clean the leftover material and let dry.
*Metals can be affected by the continuous action of mortars or grout materials. It is essential the immediate cleaning of the
leftover material after nishing the installation to avoid damage in the prole.