Emac NR4131 spécification

Taper
spécification
TECHNICAL FILE
R03.002_16/10/2015
Novosepara 4
Aluminum
Material: Aluminum
Length: 2,5 ml (8ft2in)
Dimensions: h: 7 mm. (9/32”)
a: 15, 25 mm.
(9/16, 1”)
Packaging: 50 u./box
Finishes:
13- Anod. matt silver
12- Anod. matt gold
Applications
Page 1 of 2
General features
Novosepara 4 is a prole intended to be placed as a trim in joints between oorings.
Materials
Aluminum
Technical Features
*Anodized aluminum
Alloy: 6063 (AA and ASTM)
L-3441 (UNE 38-301-89)
Fire resistance: M0 (UNE 23-727-90)
Abrasion resistance*: Very good
Lightfastness*: Excellent
Appearance and color*: EN 12373-1
Novosepara 4 aluminum is a prole made by extrusion of aluminum. The anodizing process improves
the corrosion resistance, mechanical resistance and appearance of proles. It has the quality seal
Qualanod, which guarantees the quality of the process and the resulting proles. This seal regulates
several tests: appearance and color, thickness measurements, sealing and impregnation control,
abrasion resistance, lightfastness, acetic saline chamber and nitric acid immersion.
The natural nish has no surface treatment so is less resistant to corrosion and scratching. It is not
recommended installing natural nishes without the application of an additional protection.
Prole made of aluminum, with T shape, intended to be placed as
a trim in joints between oors. Due to its geometry, the face side is
overlapped in the oor. Due to its great geometry, it is ideal to be
placed during the tiling work or once it is nished. This prole is
available in matt silver and matt gold nishes.
TECHNICAL FILE
R03.002_16/10/2015
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
You can nd out more information about the technical features of Emac®’s products by downloading
its Technical File in www.emac.es.
If you have any query, please contact our Technical Department in tecnico@emac.es.
Technical information
Novosepara 4 Aluminum
Indoors Floorings
Page 2 of 2
Outdoors
Installation
Cleaning and maintenance
The proles should be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry to remove excess moisture.
In all cases the steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is not recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
1. Spread a big amount of thin-set mortar on the surface to be tiled.
2. Do the tiling and leave the gap to install Novosepara 4
3. Fill the gap with adhesive and insert the prole until it is ush to the oor
4. Finally, clean the leftover material and let dry.
  • Page 1 1
  • Page 2 2

Emac NR4131 spécification

Taper
spécification

dans d''autres langues