TECHNICAL FILE
R03.003_12/04/2016
Materials
Novoescocia® 4 Stainless steel
Page 2 of 3
Zamak
Installation
1 2 3
4
Stainless steel
Technical features and Tests
Corrosion resistante Salt spray test
+ 504 hours without change (stainless steel)
UNE 112017:92
Fire resistance M0 (UNE 23-727-90)
UNE 23-727-90
Novoescocia® 4 Stainless Steel is a prole made of AISI-304 stainless steel. All material batches are
tested with the composition test to determine that they fulll with the specication of the alloy. Stainless
steel used in the Emac® products has been also tested with salt spray test, exceeding 500 hours of
exposition without signs of corrosion.
Stainless steel is a highly durable and resistent material, with an excellent supercial appearance that
does not degrade along the time. Available in brushed nish. This nish is slightly porous and smooth,
making easier the hygiene of the installation.
The complementary pieces of Novoescocia® 4 Stainless Steel are made of Zamak. The zamak is a
non ferrous alloy of zinc with aluminium, magnesium and copper (UNE EN 1774). It is tough, has high
hardness, high mechanical strength and excellent plastic deformability.
*You can nd out more information by consulting the Technical Files of the materials in www.emac.es
Please, clean the surface destinated to the installation of Novoescocia® 4 Stainless steel:
1. Cover generously the back face of Novoescocia® 4 Stainless Steel with an adhesive silicone type
“MS Sealing/Express Adhesive” from Fischer or similar.
2. Fill also the posterior cavity with the same adhesive to ensure a perfect sealing and good grip.
3. Place the Novoescocia® 4 Stainless Steel on the corner and press rmly ensuring a good contact
between both surfaces.
4. Finally clean the remaining material and let dry.
* In humid environments or in direct touch with water, it is recommended to seal the joints between Novoescocias®
with silicones.
To see the video, capture this
image with your mobile phone
(QR code reader software is
necessary) or click on it.
To achieve a perfect nish and protection, we recommend the installation of Novolistel® 3 Stainless
Steel in vertical corners as a complement to this Novoescocia®. This listello is available in the same
high brilliance nish. The complementary pieces allow its combination and guarantee a perfect nish
in the corners.