TECHNICAL FILE
R03.003_12/04/2016
Novoescocia® 1 Aluminum
Material: Aluminium
Length: 2,5 ml (8ft2in)
Dimensions: h: 7 mm. (9/32”)
a: 40 mm. (1 9/16”)
Packaging: 30 u./box
Finishes: Natural
White
Applications
General features
Page 1 of 3
Complementary pieces
Internal angle
External angle
Scope of Novoescocia® 1 Aluminum:
- Corners between walls and kitchen countertops
- Perimeters in shower trays or bathtubes.
- Encounters: wall-oor, wall-wall or wall-ceiling botn horizontally and vertically.
It is a great product for bathrooms, kitchens, medical consultations, restaurants... It has a versatile
design which is appropriate for homes, ofces, public buildings or installations with high requirements
of hygiene and cleaning such as garbage rooms, cold storages, communities, etc.
Novoescocia® 1 aluminum helps to fulll with the DB-HS document of the CTE (Spanish Technical
Building Code), improving the value of cleaning and desinfection of the pavements where is installed.
Novoescocia® 1 Aluminum has complementary pieces made of Zamak for its perfect nish.
Novoescocia® 1 Aluminum is a prole made with aluminum. This
prole avoids the accumulation of dirt in difcult corners. Due to its
placement is designed to be in joints wall-oor, oor-oor to make
the cleaning and maintenance of corners easier. Novoescocia®
1 aluminum has complementary pieces which are available to
achieve a fantastic nish: external and internal angle. It is available
in natural and white nishes.
TECHNICAL FILE
R03.003_12/04/2016
Page 2 of 3
Novoescocia® 1 Aluminum
Materials
Aluminum
Zamak
Novoescocia® 1 aluminum is a prole made by extrusion of aluminum. Aluminum has excellent
chemical, physical and mechanical properties. It is lightweight, tough, ductile, malleable and highly
durable. The natural nish has no surface treatment so is less resistant to corrosion and scratching. It is
not recommended installing natural nishes without the application of an additional protection.
On the other hand, lacquered nish obtains a high quality and homogeneus surface. The lacquering has
the quality seal Qualicoat, which guarantees the quality of the process and the nal products.
The complementary pieces of Novoescocia® 1 aluminum are made of Zamak. The zamak is a non
ferrous alloy of zinc with aluminium, magnesium and copper (UNE EN 1774). It is tough, has high
hardness, high mechanical strength and excellent plastic deformability.
*You can nd out more information by consulting the Technical les of materials in www.emac.es
Technical features and Tests
Alloy 6063 (L-3441/38-337)
Fire resistance M0 (UNE 23-727-90)
Abrasion resistance Very good
Lightfastness:
Excelente
Appearance and color: EN 12373-1
Installation
Please, rst of all clean the surface of Novoescocia® 1 Aluminum:
1. Putting abundant x material on the back surface of Novoescocia® 1 aluminum. This material
could be an adhesive as silicone, polyurethane mastic or other adhesives.
2. Then lean the prole lenghtwise against the angle made between the oor and the wall.
3. After this, place the wall and the oor placing them against the prole .
4. Finally, clean carefully the spare material and let it dry.
Cleaning and maintenance
The product must be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry it to remove the humidity excess. The persistent dirtiness can
be removed by using cleaning approved agents lightly abrasive or a grid covered with polished powder
neutral.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
TECHNICAL FILE
R03.003_12/04/2016
Technical information
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
You can nd out more information about the technical features of Emac®’s products by downloading
their Technical File from www.emac.es
If you have any query please contact our Technical Department in tecnico@emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Novoescocia® 1 Aluminum
Indoors Indoors Wall tiling Recyclable
Page 3 of 3
Outdoors
-
1
-
2
-
3
Emac 1S01 Manuel utilisateur
- Taper
- Manuel utilisateur
dans d''autres langues
- English: Emac 1S01 User manual
Documents connexes
-
Emac NS413A Manuel utilisateur
-
-
-
Emac 4V92 Manuel utilisateur
-
-
Emac NSS12136A Manuel utilisateur
-
-
Unbranded SMR92 Mode d'emploi
-
-