..
FIXTURE INSTALLATION
. A FIXTURE ASSEMBLY STEMS (L) FIXTURE ASSEMBLY (M).
. F STEM (J) WIRE BODY (K). K
STEMS (I) .
. S SLIP COLLAR (I), CANOPY (G) STEM (J), CONNECTOR (H),
NIPPLE (F), NUT (C) STEM (J). S CROSS BAR (A) NIPPLE
(F), NUT (C) CROSSBAR (A)
. P CROSSBAR (A)
MOUNTING SCREWS (E). T
. T .
5. T 6 STEM (J) 5/.
6. A G (G) (G
) GROUND SCREW (B) CROSSBAR (A). NEVER CONNECT GROUND WIRE TO
HOT WIRE! FAILURE TO FOLLOW THIS COULD RESULT IN SERIOUS INJURY OR DEATH!
. C (G ) . F
(WIRE NUT) (D). S ,
. MAKE SURE
THERE ARE NO EXPOSED WIRE OF STRANDS THAT COULD CAUSE A DANGEROUS SHORT
CIRCUIT!
. C (G ) . F
. NEVER REVERSE HOT AND NEUTRAL WIRES. FAILURE TO FOLLOW
THIS COULD RESULT IN SERIOUS INJURY OR DEATH!
. P . L CANOPY (G) ,
SCREW COLLAR (I).
. P BULB (N) . THIS FIXTURE IS RATED FOR WATT TYPE G
LAMP. DO NOT EXCEED THE RECOMMENDED WATTAGE! THIS FIXTURE CAN BE CONTROLLED BY
A WALL DIMMING DEVICE. ONLY USE TRIAC/ELECTRONIC DIMMER. MAKE SURE THE CARTON IS
MARKED FOR USE WITH LED COMPACT FLUORESCENT-INCANDESCENT LIGHT SOURCE.
. S GLASS (O) S FIXTURE ASSEMBLY (M)
. R OUTLET .
PART(S) REPLACEMENT PART NAME NUMBER
A,B,C,D,E,F,H,I HARDWARE KIT HDW--6
G CANOPY CPY--6
J STEM STM-DY-SET
L FIXTURE ASSEMBLY STEM STM--6
O GLASS GLS--6
ORAIBI
-6
I I
DA
B
C
E
F
G
H
I
J
K
L
N
O
M