..
FIXTURE INSTALLATION
. S CABLE CLAMP (T) . F SAFETY CABLE (S)
. L SAFETY CABLE (S) .
F SAFETY CABLE (S) CABLE CLAMP (T). U
, CABLE CLAMP (T) SAFETY CABLE (S) .
2. F STEM KIT (I) FIXTURE ASSEMBLY (M). K
.
. S CANOPY (J) STEM KIT (I), NIPPLE (H) STEM
KIT (I).
. P , MOUNTING PLATE (A)
NIPPLE (E) (BY OTHER) MOUNTING SCREWS (B). WASHERS (F)
(BY OTHER), HEX NUTS (G) (BY OTHER) T
. T
. MAKE SURE THE NIPPLE (E) (BY OTHER) ARE STRONG ENOUGH!
5. T 6" STEM 5
".
6. A G (G) (G
) GROUND SCREW (C) MOUNTING PLATE (A). NEVER CONNECT GROUND WIRE
TO "HOT" WIRE! FAILURE TO FOLLOW THIS COULD RESULT IN SERIOUS INJURY OR DEATH!
. C (G ) . F
( WIRE NUT) (D). S " ,
. MAKE SURE
THERE ARE NO EXPOSED WIRE OF STRANDS THAT COULD CAUSE A DANGEROUS SHORT CIRCUIT!
. C (G ) . F
. NEVER REVERSE HOT AND NEUTRAL WIRES. FAILURE TO FOLLOW THIS
COULD RESULT IN SERIOUS INJURY OR DEATH!
. P . L CANOPY (J) ,
HEADLESS SCREW ALLEN KEY TOOLING (K) .
. S BULB (N) SOCKET . THIS FIXTURE IS RATED FOR 25 WATT TYPE G25
LAMP. DO NOT EXCEED THE RECOMMENDED WATTAGE!
. S TUBE (L) FIXTURE ASSEMBLY (M) GLASS G (R) TUBE (L)
.
. S GLASS A, B, C (O,P,Q) FIXTURE ASSEMBLY (M) .
. R .
KYOTO
2-6
I I
PART(S) REPLACEMENT PART NAME NUMBER
A,B,C,D,E,T HARDWARE KIT HDW-2-6
J CANOPY CPY-2-6
I STEM KIT STM-CH22-SET
O GLASS A GLS-2-A
P GLASS B GLS-2-B
Q GLASS C GLS-2-C
R GLASS G GLS-2-G
A - GLASS
PCS AROUND
B - GLASS
PCS AROUND
A - GLASS
PCS AROUND
C - GLASS
PCS AROUND
B - GLASS
PC
G - GLASS
PCS AROUND
G - GLASS
PCS AROUND
A
B
C
D
I
L
E
F
G
H
J
M
S
K
N
NUMBER SIZE QTY
A-GLASS 2 6
B-GLASS 26
C-GLASS
G-GLASS
O
P
Q
R
T