About this Document
This document includes instructions
for installing AXIS P8535 on your
network. Previous experience of
networking will be beneficial when
installing the product.
Legal Considerations
Video and audio surveillance can be
prohibited by laws that vary from
country to country. Check the laws in
your local region before using this
product for surveillance purposes. This
product includes one (1) H.264
decoder license. To purchase further
licenses, contact your reseller.
Trademark Acknowledgments
AXIS COMMUNICATIONS, AXIS, ETRAX,
ARTPEC and VAPIX are registered
trademarks or trademark applications
of Axis AB in various jurisdictions. All
other company names and products
are trademarks or registered
trademarks of their respective
companies.
Apple, Boa, Apache, Bonjour, Ethernet,
Internet Explorer, Linux, Microsoft,
Mozilla, Real, SMPTE, QuickTime, UNIX,
Windows, Windows Vista and WWW
are registered trademarks of the
respective holders. Java and all
Java-based trademarks and logos are
trademarks or registered trademarks of
Oracle and/or its affiliates. UPnPTM is a
certification mark of the UPnPTM
Implementers Corporation.
SD, SDHC and SDXC are trademarks or
registered trademarks of SD-3C, LLC in
the United States, other countries or
both. Also, miniSD, microSD,
miniSDHC, microSDHC, microSDXC
are all trademarks or registered
trademarks of SD-3C, LLC in the
United States, other countries or both.
WPA, WPA2 and Wi-Fi Protected Setup
are marks of the Wi-Fi Alliance.
Microsoft, Windows, Windows Vista,
WWW, Internet Explorer, DirectX, Intel,
Intel Core, Pentium and Xeon are
registered trademarks of the respective
holders.
Acrobat, Adobe, Apache, Debian,
Ethernet, Internet
Explorer, Iomega, LaCie, Linux,
Machintosh, Microsoft, Mozilla,
MySQL, Red Hat, UNIX, Windows,
WWW, Wi-Fi are registered
trademarks of the respective holders.
Java and all Java-based trademarks
and logos are trademarks or registered
trademarks of Oracle and/or its
affiliates. UPnPTM is a certification
mark of the UPnPTM Implementers
Corporation. WPA is a mark of the Wi-
Fi Alliance.
Electromagnetic Compatibility
(EMC)
This equipment has been designed and
tested to fulfill applicable standards
for:
• Radio frequency emission when
installed according to the
instructions and used in its intended
environment.
• Immunity to electrical and
electromagnetic phenomena when
installed according to the
instructions and used in its intended
environment.
USA - This equipment has been
tested using a shielded network cable
(STP) and found to comply with the
limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Canada - This Class B digital
apparatus complies with Canadian
ICES-003.
Europe - This digital equipment
fulfills the requirements for RF
emission according to the Class B limit
of EN 55022.
This product fulfills the requirements
for immunity according to EN 61000-
6-1 residential, commercial and light-
industrial environments.
This product fulfills the requirements
for immunity according to EN 61000-
6-2 industrial environments.
This product fulfills the requirements
for immunity according to EN 55024
residential and commercial
environments.
Australia/New Zealand
This digital equipment fulfills the
requirements for RF emission
according to the Class B limit of AS/
NZS CISPR 22.
Safety
This product complies with IEC/EN/UL
60950-1, Safety of
Information Technology Equipment.
The power supply used with this
product shall fulfill the requirements
for Safety Extra Low Voltage (SELV)
and Limited Power Source (LPS)
according to EN/IEC/UL 60950-1.
Equipment Modifications
This equipment must be installed and
used in strict accordance with the
instructions given in the user
documentation. This equipment
contains no user-serviceable
components. Unauthorized equipment
changes or modifications will
invalidate all applicable regulatory
certifications and approvals.
Liability
Every care has been taken in the
preparation of this document. Please
inform your local Axis office of any
inaccuracies or omissions. Axis
Communications AB cannot be held
responsible for any technical or
typographical errors and reserves the
right to make changes to the product
and documentation without prior
notice. Axis Communications AB
makes no warranty of any kind with
regard to the material contained
within this document, including, but
Korea - ࢇ̛̛Еɼࢽࡈ%̗ࢷળࢶଢ̛̛Ի۰
࣯Իɼࢽ߾۰یࡈଜЕʨࡶּࢶࡳԻଜֲֻҘ
एࠇ߾۰یࡈଟܹݡТЬ
Japan - B
not limited to, the implied warranties
of merchantability and fitness for a
particular purpose. Axis
Communications AB shall not be liable
nor responsible for incidental or
consequential damages in connection
with the furnishing, performance or
use of this material. This product is
only to be used for its intended
purpose.
Disposal and Recycling
When this product has reached the
end of its useful life, dispose of it
according to local raws and
regulations. For information about
your nearest designated collection
point, contact your local authority
responsible for waste disposal.
In accordance with local legislation,
penalties may be applicable for
incorrect disposal of this waste.
Europe
This symbol means that the
product shall not be
disposed of together with
household or commercial
waste.
Directive 2012/19/EU on waste
electrical and electronic
equipment (WEEE) is applicable in the
European Union member states. To
prevent potential harm to human
health and the environment, the
product must be disposed of in
an approved and environmentally safe
recycling process. For information
about your nearest designated
collection point, contact your local
authority responsible for waste
disposal. Businesses should contact
the product supplier for information
about how to dispose of this product
correctly.
This product complies with the
requirements of Directive 2011/65/EU
on the restriction of the use of certain
hazardous substances in electrical and
electronic equipment (RoHS).
China
This product complies with the
requirements of the
legislative act Administration
on the Control of Pollution
Caused by Electronic Information
Products (ACPEIP).
Support
Should you require any technical
assistance, please contact your Axis
reseller. If your questions cannot be
answered immediately, your reseller
will forward your queries through the
appropriate channels to ensure a rapid
response. If you are connected to the
Internet, you can:
• download user documentation and
firmware updates
• find answers to resolved problems in
the FAQ database. Search by
product, category, or phrases
• report problems to Axis support by
logging in to your private support
area.
Battery Replacement
This Axis product uses a 3.0 V BR/
CR2032 lithium battery as the power
supply for its internal real-time clock
(RTC). Under normal conditions this
battery will last for a minimum of 5
years. Low battery power affects the
operation of the RTC, causing it to
reset at every power-up. A log
message will appear when the battery
needs replacing. The battery should
not be replaced unless required!
If the battery needs replacing,
please contact www.axis.com/techsup
for assistance.
Dispose of used batteries according to
the manufacturer's instructions.
• Risk of explosion if battery is
incorrectly replaced.
• Replace only with the same or
equivalent battery, as recommended
by the manufacturer.
Remplacement des piles
Ce produit Axis nécessite une pile au
lithium CR2032 de 3,0 V pour
l'alimentation de son horloge en
temps réel interne. Dans des
conditions normales d'utilisation, cette
pile est censée durer au moins
5 ans. Si la pile est faible, le
fonctionnement de l'horloge en temps
réel peut être affecté et
entraîner sa réinitialisation à chaque
mise sous tension. Un message
enregistré apparaît lorsque la
pile doit être remplacée. Ne remplacez
la pile qu'en cas de nécessité !
Si la pile doit être remplacée, veuillez
contacter www.axis.com/techsup pour
obtenir de l’aide.
• Jetez les piles usagées
conformément aux consignes du
fabricant.
• Le remplacement incorrect de la pile
peut entraîner un risque d'explosion.
• Remplacez la pile par une pile
identique ou équivalente
uniquement, en respectant les
recommandations du fabricant.
Batteriewechsel
Dieses Axis-Produkt ist mit einer 3,0 V
CR2032 Lithium-Batterie als
Stromversorgung für die
interne Echtzeituhr (RTC) ausgestattet.
Unter normalen Bedingungen hält die
Batterie mindestens 5
Jahre. Bei entladener Batterie ist der
Betrieb der Echtzeituhr nicht mehr
ausreichend gewährleistet,
so dass die Uhr bei jedem Systemstart
zurückgesetzt wird. Sie erhalten eine
Protokollnachricht,
wenn ein Batteriewechsel erforderlich
ist. Die Batterie sollte erst bei Bedarf
gewechselt werden.
Unter www.axis.com/techsup finden
Sie Informationen darüber, was Sie
beim Austausch der
Batterie beachten müssen.
• Verbrauchte Batterien sind gemäß
den Herstelleranweisungen zu
entsorgen.
• Explosionsgefahr bei fehlerhaftem
Batteriewechsel!
• Die Batterie muss durch dasselbe
oder ein gleichwertiges Fabrikat
ersetzt werden, das vom Hersteller
zugelassen ist.
Sostituzione della batteria
Questo prodotto Axis utilizza una
batteria al litio CR2032 da 3.0 V per
alimentare il real-time clock
(RTC) interno. In normali condizioni
questa batteria ha una durata di
almeno 5 anni. La batteria
scarica influisce sul funzionamento
dell'RTC, che viene reimpostato ad
ogni accensione. Un
messaggio di registro apparirà quando
la batteria dovrà essere sostituita. La
batteria non deve
essere sostituita a meno che non sia
necessario.
Se la batteria non deve essere
sostituita, contattare www.axis.com/
techsup per assistenza.
• Smaltire le batterie usate secondo le
istruzioni del produttore.
• Rischio di esplosione se la batteria
non viene sostituita correttamente.
• Sostituire solo con una batteria
identica o equivalente, come
raccomandato dal produttore.
Sustitución de la batería
Este producto Axis utiliza una batería
de litio CR2032 3.0 de 3,0 V como
fuente de alimentación
para su reloj de tiempo real interno
(RTC). En condiciones normales, esta
batería durará un mínimo
de 5 años. Cuando la batería tiene
poca carga, el funcionamiento del RTC
se puede ver afectado, ya
que esto puede hacer que se reinicie
cada vez que se encienda. Aparecerá
un mensaje de registro
cuando sea necesario sustituir la
batería. No se debe sustituir la batería
a menos que sea necesario.
Si necesita sustituir la batería, visite la
página www.axis.com/techsup para
recibir asistencia.
• Deseche las baterías usadas según
las instrucciones del fabricante.
• Deseche las baterías usadas según
las instrucciones del fabricante.
Contact Information
Axis Communications AB
Emdalavägen 14
223 69 Lund
Sweden
Tel: +46 46 272 18 00
Fax: +46 46 13 61 30
www.axis.com
Warranty
www.axis.com/warranty
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
dans d''autres langues
- English: Axis P8535 Installation guide
- Deutsch: Axis P8535 Installationsanleitung
Documents connexes
-
Axis P1425-E Guide d'installation
-
Axis axis p54 ptz dome network camera series Manuel utilisateur
-
Axis P1435-LE Manuel utilisateur
-
Axis P3224-LVE Manuel utilisateur
-
Axis P3224-VE Manuel utilisateur
-
Axis M7011 Manuel utilisateur
-
-
Axis M1104 Manuel utilisateur
-