Whirlpool WGG745S0FS Mode d'emploi

Catégorie
Cuisinières
Taper
Mode d'emploi
THANK YOU for purchasing this high-quality product. Register your range at www.whirlpool.com. In Canada, register your range
at www.whirlpool.ca.
For future reference, please make a note of your product model and serial numbers. These can be located on the serial plates.
The serial plates are located behind the control panel. You may view them by rotating the serial plates up.
Model Number _________________________________________ Serial Number __________________________________________
Para una versión de estas instrucciones en español, visite www.whirlpool.com.
Deberá tener los números de modelo y serie, que se pueden encontrar en las placas de serie detrás del panel de control.
Los puede ver al rotar hacia arriba las placas de serie.
Table of Contents
GAS DOUBLE OVEN RANGE
USER INSTRUCTIONS
W10841342B
RANGE SAFETY .............................................................................2
The Anti-Tip Bracket ....................................................................3
FEATURE GUIDE ............................................................................4
COOKTOP USE ..............................................................................6
Sealed Surface Burners ...............................................................6
EZ-2-Lift™ Hinged Cast Iron Grates ...........................................7
Burner Size ...................................................................................7
Cookware .....................................................................................7
Home Canning .............................................................................8
OVEN USE ....................................................................................... 8
Electronic Oven Controls .............................................................8
Keep Warm ................................................................................. 10
Sabbath Mode............................................................................10
Aluminum Foil .............................................................................10
Positioning Racks and Bakeware ..............................................10
Oven Vents .................................................................................11
Baking and Roasting ..................................................................11
Broiling........................................................................................12
Lower Oven Convection Cooking ..............................................12
Cook Time ..................................................................................12
RANGE CARE ...............................................................................13
Self-Cleaning Cycle ....................................................................13
General Cleaning ........................................................................14
Oven Lights ................................................................................14
TROUBLESHOOTING ..................................................................15
ACCESSORIES .............................................................................17
WARRANTY ..................................................................................18
2
RANGE SAFETY
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
WARNING: If the information in this manual is not followed exactly, a fire or explosion
may result causing property damage, personal injury or death.
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this
or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
Do not try to light any appliance.
Do not touch any electrical switch.
Do not use any phone in your building.
Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
instructions.
If you cannot reach your gas supplier, call the fire department.
Installation and service must be performed by a qualified installer, service agency or
the gas supplier.
WARNING: Gas leaks cannot always be detected by smell.
Gas suppliers recommend that you use a gas detector approved by UL or CSA.
For more information, contact your gas supplier.
If a gas leak is detected, follow the “What to do if you smell gas” instructions.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
3
The Anti-Tip Bracket
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the
anti-tip bracket fastened down properly.
Tip Over Hazard
A child or adult can tip the range and be killed.
Verify the anti-tip bracket has been properly installed and engaged per installation instructions.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed and engaged.
Failure to follow these instructions can result in death or serious burns to children and adults.
To verify the anti-tip bracket is installed and engaged:
Slide range forward.
Look for the anti-tip bracket securely attached to floor or wall.
Slide range back so rear range foot is under anti-tip bracket.
See installation instructions for details.
WARNING
Anti-Tip
Bracket
Range Foot
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the range, follow
basic precautions, including the following:
WARNING: TO REDUCE THE RISK OF TIPPING OF
THE RANGE, THE RANGE MUST BE SECURED BY
PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK
IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE
RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET
SECURELY ATTACHED TO FLOOR OR WALL, AND
SLIDE RANGE BACK SO REAR RANGE FOOT IS UNDER
ANTI-TIP BRACKET.
WARNING:
NEVER use this appliance as a space
heater to heat or warm the room. Doing so may result in
carbon monoxide poisoning and overheating of the oven.
WARNING:
NEVER cover any slots, holes or passages
in the oven bottom or cover an entire rack with materials
such as aluminum foil. Doing so blocks air flow through the
oven and may cause carbon monoxide poisoning.
Aluminum foil linings may also trap heat, causing a fire
hazard.
CAUTION: Do not store items of interest to children in
cabinets above a range or on the backguard of a range –
children climbing on the range to reach items could be
seriously injured.
Proper Installation – The range, when installed, must be
electrically grounded in accordance with local codes or, in
the absence of local codes, with the
National Electrical
Code, ANSI/NFPA 70
. In Canada, the range must be
electrically grounded in accordance with Canadian
Electrical Code. Be sure the range is properly installed and
grounded by a qualified technician.
This range is equipped with a three-prong grounding plug
for your protection against shock hazard and should be
plugged directly into a properly grounded receptacle. Do
not cut or remove the grounding prong from this plug.
Disconnect power before servicing.
Injuries may result from the misuse of appliance doors or
drawers such as stepping, leaning, or sitting on the doors
or drawers.
Maintenance – Keep range area clear and free from
combustible materials, gasoline, and other flammable
vapors and liquids.
Storage in or on the Range Flammable materials should
not be stored in an oven or near surface units.
Top burner flame size should be adjusted so it does not
extend beyond the edge of the cooking utensil.
For self-cleaning ranges
Before Self-Cleaning the Oven – Remove broiler pan and
other utensils. Wipe off all excessive spillage before
initiating the cleaning cycle.
4
FEATURE GUIDE
This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Product Help section
of our website at www.whirlpool.com for more detailed instructions. In Canada, refer to the Product Help Section at www.whirlpool.ca.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
Keypad Feature Instructions
Clock Clock
This clock can use a 12- or 24-hour cycle. See “Electronic Oven Controls” section.
1. Press the Clock keypad.
2. Press “3” for AM or “6” for PM.
3. Press the number keypads to set the time of day.
4. Press the Clock keypad, START UPPER or START LOWER.
Oven Light Oven cavity
light
While the oven doors are closed, press the Oven Light keypad to turn the lights on and off.
The oven lights will come on when an oven door is opened.
TIMER SET/OFF Oven timer
The Timer can be set in hours or minutes up to 9 hours and 59 minutes.
1. Press TIMER SET/OFF.
2. Press the number keypads to set the length of time in hr-min. Leading zeros do not have
to be entered. For example, for 2 minutes, enter “2.”
3. Press TIMER SET/OFF to begin the countdown. If enabled, timer tones will sound at the
end of countdown. The display will return to the time of day at the end of countdown.
4. Press TIMER SET/OFF to cancel the Timer and return to the time of day. Do not press the
Cancel keypads because the oven will turn off.
START UPPER
START LOWER
Cooking
start
The Start keypads begin any oven function. If Start is not pressed within 2 minutes after
pressing a keypad, the function is canceled and the time of day is displayed.
CANCEL UPPER
CANCEL LOWER
Range
function
The upper and lower Cancel keypads stop any corresponding oven function except the Clock,
Timer, and Control Lock in the selected oven.
BAKE UPPER
BAKE LOWER
Baking and
roasting
1. Press BAKE for the desired oven.
2. Press the number keypads to set the desired temperature. If the temperature entered is not
in the range of the temperatures allowed, the minimum or maximum allowed temperature
will be displayed. Enter a temperature in the allowable range.
3. (Lower oven, single rack baking only) Press START LOWER. Rapid Preheat will begin.
IMPORTANT: Rapid Preheat should be used only for single-rack baking.
4. (Multiple-rack baking) Press START for the desired oven. Press START for the desired oven
again to cancel Rapid Preheat.
5. To change the temperature, repeat Step 2. Press START for the selected oven for the
change to take effect.
NOTE: If cooking in both ovens, press any number on the keypad, then follow the
on-screen prompts to select the desired oven before entering temperature.
6. Press CANCEL for the selected oven when finished.
5
Keypad Feature Instructions
FROZEN BAKE
(upper only)
Prepackaged
food
1. Position the food on a flat rack in the oven on rack position 1. See the “Positioning
Racks and Bakeware” section.
NOTE: Cook only 1 package of frozen food at a time when using Frozen Bake™
Technology.
2. Press FROZEN BAKE.
3. Press the number keypad to select the desired food option.
4. Press the number keypads to set the temperature as recommended on the food
packaging.
5. Press COOK TIME.
6. Press the number keypads to set the maximum cook time as recommended on the
food packaging.
7. Press START. The range will calculate the best cook time based on the current oven
temperature.
NOTE: The cook time that appears in the display is the estimated required cook time as
calculated by the oven control. It may be different than the time you entered. A beep will
alert you to check the food’s doneness with at least 2 minutes remaining on the timer.
Follow the prompts on the display to select more time if desired.
8. At the end of the cook time, a beep will alert you to check the food’s doneness. Follow the
prompts on the display to select more time if desired. Unless more time is selected, the
bake element turns off.
9. Press CANCEL when finished.
BROIL (upper only) Broiling
1. Press BROIL.
2. Press the number keypads as instructed by the scrolling text to set the desired
temperature level.
3. Press START for the selected oven. No preheating is necessary.
4. Position the cookware in the oven. Close the door.
5. Press CANCEL UPPER when finished.
CONVECT
(lower only)
Convection
cooking
1. Press CONVECT until the desired mode is displayed, and then press START LOWER.
2. Press the number keypads to set the desired temperature. If the temperature entered is not
in the range of the temperatures allowed, the minimum or maximum allowed temperature
will be displayed. Enter a temperature in the allowable range.
3. Press START LOWER.
4. To change the temperature, repeat Step 2. Press START LOWER for the change to
take effect.
NOTE: If cooking in both ovens, press any number on the keypad, then follow the
on-screen prompts to select the desired oven before entering temperature.
5. Press CANCEL LOWER when finished.
KEEP WARM UPPER
KEEP WARM LOWER
Hold warm
Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM for the desired oven.
2. Press the number keypads to set the desired temperature. If the temperature entered is not
in the range of the temperatures allowed, the minimum or maximum allowed temperature
will be displayed. Enter a temperature in the allowable range.
3. Press START for the selected oven.
4. To change the temperature, repeat steps 2 and 3.
5. Press CANCEL for the selected oven when finished.
START TIME Delayed start
The Start Time keypad is used to enter the starting time for an oven function with a delayed
start. Start Time should not be used for foods such as breads and cakes because they may
not bake properly.
To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.
COOK TIME Timed
cooking
Cook Time allows the oven to be set to turn on at a certain time of day, cook for a set length of
time, and/or shut off automatically.
To set a Cook Time or Delayed Cook Time, see the “Cook Time” section.
NOTE: If cooking in both ovens, press any number on the keypad, then follow the on-screen
prompts to select the desired oven before entering temperature.
PRECISE CLEAN Self-cleaning
cycle
See the “Self-Cleaning Cycle” section.
START LOWER LOCK
hold 3 sec.
Oven control
lockout
1. Check that the ovens and timers are OFF.
2. Press and hold START LOWER for 3 seconds.
3. If enabled, a tone will sound and “CONTROL LOCKED” will be displayed.
4. Repeat to unlock. No keypads will function when the control is locked.
6
COOKTOP USE
Electric igniters automatically light the surface burners
when control knobs are turned to IGNITE.
Before setting a control knob, place filled cookware on
the grate. Do not operate a burner using empty cookware
or without cookware on the grate.
The flame should be adjusted so it does not extend beyond the
edge of the pan.
NOTE: Visually check that the burner has lit. If the burner does
not ignite, listen for a clicking sound. If you do not hear the igniter
click, turn the burner off. Check for a tripped circuit breaker or
blown household fuse.
Check that the control knob is pressed completely down on the
valve shaft. If the spark igniter still does not operate, call a trained
repair specialist.
To Set:
1. Push in and turn knob counterclockwise to IGNITE.
All surface burners will click. Only the burner with the
control knob turned to IGNITE will produce a flame.
2. Turn knob to anywhere between Hi and Lo.
Power Failure
In case of a prolonged power failure, the surface burners cannot
be lit manually. No attempt should be made to operate the
appliance during a power failure.
Sealed Surface Burners
IMPORTANT: Do not obstruct the flow of combustion
and ventilation air around the burner grate edges.
Burner Cap: Always keep the burner cap in place when using
a surface burner. A clean burner cap will help avoid poor ignition
and uneven flames. Always clean the burner cap after a spillover,
and routinely remove and clean the caps according to the
“General Cleaning” section.
Gas Tube Opening: Gas must flow freely throughout the gas tube
opening for the burner to light properly. Keep this area free of soil
and do not allow spills, food, cleaning agents, or any other
material to enter the gas tube opening. Keep spillovers out of the
gas tube opening by always using a burner cap.
Burner Ports: Check burner flames occasionally for proper size
and shape as shown in the previous illustration. A good flame
is blue in color, not yellow. Keep this area free of soil and do not
allow spills, food, cleaning agents, or any other material to enter
the burner ports.
To Clean:
IMPORTANT: Before cleaning, make sure all controls are OFF
and the cooktop is cool. Do not use oven cleaners, bleach, or
rust removers.
1. Remove the burner cap and the burner base and clean
according to “General Cleaning” section.
2. Clean the gas tube opening with a damp cloth.
WARNING
Fire Hazard
Do not let the burner flame extend beyond the edge of
the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death
or fire.
REMEMBER: When range is in use or (on some models)
during the Self-Cleaning cycle, the entire cooktop area may
become hot.
A
B
C
D
C
B
A
A. Burner cap
B. Burner base
C. Igniter
D. Gas tube opening
B
A
A. 1" to 1
1
/
2
" (2.5 cm to 3.8 cm)
B. Burner ports
Keypad Feature Instructions
SETTINGS Oven use
functions
Enables you to personalize the audible tones and oven operation to suit your needs. See the
“Oven Use” section.
7
3. Clean clogged burner ports with a straight pin as shown.
Do not enlarge or distort the port. Do not use a wooden
toothpick. If the burner needs to be adjusted, contact a trained
repair specialist.
4. Replace the burner cap, making sure the alignment pins are
properly aligned with the burner cap.
5. Turn on the burner. If the burner does not light, check cap
alignment. If the burner still does not light, do not service the
sealed burner yourself. Contact a trained repair specialist.
EZ-2-Lift™ Hinged Cast Iron Grates
The grates must be properly positioned before cooking. In the
proper position, the grates should be flush and level. Improper
installation of the grates may result in chipping or scratching
of the cooktop.
Your cooktop comes with hinged grates for easier cleaning. The
grates pivot upward and toward the sides of the cooktop for easy
access under the grates.
The grates will stop once they are moved to their vertical (fully
open) position. A 20" (50.8 cm) minimum clearance from the
countertop to the bottom of the upper cabinets/appliances is
needed to fully open the grates.
Be sure to return the grates to their normal (down) position once
cleaning is complete.
The grates are removable for cleaning.
To attach the grates to their hinges, insert the grate slot over the
hinge pin on the side of the cooktop. Be sure to keep the grate
angled above the cooktop to avoid scratching the cooktop until
the grate is seated on the hinge pin. Then position the grate down
onto the cooktop.
Although the burner grates are durable, they will gradually lose
their shine and/or discolor due to the high temperatures of the
gas flame.
Burner Size
Select a burner that best fits your cookware. See the following
illustration and chart.
Burner Size Recommended Use
Small
Low-heat cooking
Melting chocolate or butter
Large
For large cookware
Extra-Large
For large cookware
Most powerful burner
Oval
For longer dishes
Cookware
IMPORTANT: Do not leave empty cookware on a hot surface
cooking area, element, or surface burner.
Ideal cookware should have a flat bottom, straight sides, and a
well-fitting lid, and the material should be of medium-to-heavy
thickness.
Rough finishes may scratch the cooktop or coils. Aluminum
and copper may be used as a core or base in cookware. However,
when used as a base, they can leave permanent marks on the
grates.
Cookware material is a factor in how quickly and evenly heat is
transferred which affects cooking results.
Cookware with nonstick surfaces should not be used under
the broiler.
Check for flatness by placing the straight edge of a ruler across
the bottom of the cookware. While you rotate the ruler, no space
or light should be visible between it and the cookware.
A
B
A. Incorrect
B. Correct
B
A
A. Grate slot
B. Hinge pin
Front of Range
Oval
Extra
Large
Small
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 9
2 0
1
2
3
4
5
6
7
8
Use the following chart as a guide for cookware material
characteristics.
Cookware Characteristics
Aluminum
Heats quickly and evenly.
Suitable for all types of cooking
Medium or heavy thickness is best for
most cooking tasks.
Cast iron
Heats slowly and evenly.
Good for browning and frying
Maintains heat for slow cooking.
Ceramic or
ceramic glass
Follow manufacturer’s instructions.
Heats slowly but unevenly.
Ideal results on low-to-medium heat
settings
Copper
Heats very quickly and evenly.
May leave copper residues which may
be diminished if cleaned immediately
after cooking.
Earthenware
Follow manufacturer’s instructions.
Use on low heat settings.
Porcelain
enamel-on-steel
or cast iron
See stainless steel or cast iron.
Stainless steel
Heats quickly but unevenly.
A core or base of aluminum or copper
on stainless steel provides even
heating.
For best results, the cookware should be centered above the
burner with the bottom sitting level on the grate. The flame should
be adjusted so that it does not extend up the sides of the pan.
Home Canning
When canning for long periods, alternate the use of surface
burners between batches. This allows time for the most recently
used areas to cool.
Center the canner on the grate above the burner.
Do not place canner on 2 surface burners at the same time.
For more information, contact your local agricultural extension
office or refer to published home canning guides. Companies
that manufacture home canning products can also offer
assistance.
OVEN USE
Odors and smoke are normal when the oven is used the first few
times or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off. Exposure to the fumes may result in death
to certain birds. Always move birds to another closed and well-
ventilated room.
Electronic Oven Controls
Control Display
The display will flash when powered up or after a power loss.
Press CANCEL to clear. When the oven is not in use, the time of
day is displayed.
Tones
Tones are audible signals, indicating the following:
One Tone
Valid keypad press
Oven is preheated (long tone).
Kitchen timer (long tone with reminder tone every minute)
Function has been entered.
Three Tones
Invalid keypad press
Four Tones
End of cycle (with reminder tone every minute)
Use the Settings key to change the tone settings.
Settings
Many features of the oven control can be adjusted to meet your
personal needs. These changes are made using the Settings
keypad.
Use the Settings keypad to scroll through the features that can
be changed. Each press of the Settings keypad will advance
the display to the next setting. After selecting the feature to
be changed, the control will prompt you for the required input.
Details of all of the feature changes are explained in the following
sections.
Press CANCEL UPPER or CANCEL LOWER to exit Settings.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit, but it can be changed
to Celsius.
1. Press SETTINGS until “TEMP UNIT” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
9
Audible Tones Disable
Turns off all tones, including the end-of-cycle tone and keypress
tones.
1. Press SETTINGS until “SOUND” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
Sound Volume
Sets the pitch of the tone to either high or low.
1. Press SETTINGS until “SOUND VOLUME” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
End of Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
1. Press SETTINGS until “END TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
Keypress Tones
Activates or turns off the tones when a keypad is pressed.
1. Press SETTINGS until “KEYPRESS TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute
after the end-of-cycle tones.
1. Press SETTINGS until “REMINDER TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
12/24 Hour Clock
1. Press SETTINGS until “12/24 HOUR” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
12-Hour Shut-Off
The oven control is set to automatically shut off the oven 12 hours
after the oven initiates a cook or clean function. This will not
interfere with any timed or delay cook functions.
1. Press SETTINGS until “12-HR SHUT-OFF” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
Languages - Scrolling Display Text
Language options are English, Spanish, and French.
1. Press SETTINGS until “LANGUAGE” is displayed.
2. The current setting will be displayed.
3. Press the number keypad to adjust the setting.
4. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
Oven Temperature Offset Control
IMPORTANT: Do not use a thermometer to measure oven
temperature. Elements will cycle on and off as needed to provide
consistent temperature, but they may run slightly hot or cool at
any point in time due to this cycling. Most thermometers are slow
to react to temperature change and will not provide an accurate
reading due to this cycling.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature can
be adjusted to personalize it for your cooking needs. It can be
changed in Fahrenheit or Celsius.
To Adjust Oven Temperature:
1. Press SETTINGS until “TEMP CALIB” is displayed.
2. The current setting will be displayed. Press the “1” keypad
to toggle between the upper and lower ovens.
3. Press START UPPER or START LOWER to select the choice
displayed in Step 2. Wait 10 seconds for the display to change
or press START UPPER or START LOWER, and then continue
with Step 4.
4. Press the “3” keypad to increase the temperature in 5°F
(3°C) increments or press the “6” keypad to decrease the
temperature in 5°F (3°C) increments. The range is from -30°F
to +30°F (-18°C to +18°C).
5. Press START UPPER or START LOWER.
6. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
Demo Mode
IMPORTANT: This feature is intended for use on the sales floor
with 120 V power connection and permits the control features
to be demonstrated without the oven turning on. If this feature
is activated, the oven will not work.
1. Press SETTINGS until “DEMO MODE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
Energy Save
The Energy Save mode deactivates the display to reduce energy
consumption. The setting will be activated after being idle for
several minutes. Any mode may be used with the range in Energy
Save by selecting the desired mode.
1. Press SETTINGS until “ENERGY SAVE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL UPPER or CANCEL LOWER to exit and
display the time of day.
10
Keep Warm
IMPORTANT: Food must be at serving temperature before placing
it in the warmed oven. Food may be held up to 1 hour; however,
breads and casseroles may become too dry if left in the oven
during the Keep Warm function. For best results, cover food.
The Keep Warm feature allows hot cooked foods to stay at
serving temperature.
To Use:
1. Press KEEP WARM for the desired oven.
2. Press the number keypads to set the desired temperature. If
the temperature entered is not in the range of the temperatures
allowed, the minimum or maximum allowed temperature will
be displayed. Enter a temperature in the allowable range.
NOTE: When cooking in a single oven, the temperature may
be changed at any time by pressing the number keypads to
enter the desired temperature, and then press START for the
selected oven.
When cooking in both ovens, press any number on the
keypad, then follow the on-screen prompts to select the
desired oven. Press the number keypads to enter the desired
temperature, and then press START for the selected oven.
3. Press START for the selected oven.
4. Place food in the oven.
5. Press CANCEL for the selected oven when finished.
6. Remove food from the oven.
To Cancel Keep Warm:
1. Press CANCEL for the selected oven.
2. Remove food from oven.
Sabbath Mode
The Sabbath mode sets the oven to remain on in a bake setting
until turned off.
When the Sabbath mode is set, only the Bake cycle will operate.
All other cooking and cleaning cycles are disabled. No tones will
sound and the displays will not indicate temperature changes.
When the oven door is opened or closed, the oven light will
not turn on or off and the oven heating elements will not turn on
or off immediately.
To Enable Sabbath Mode Capability (one time only):
1. Press SETTINGS until “SABBATH” is displayed.
2. Press the “1” keypad. Sabbath mode can be activated
for baking.
3. Press CANCEL UPPER or CANCEL LOWER to save the setting
and exit to display the time of day.
NOTE: To disable the Sabbath mode, repeat steps 1 through 3
to change the status from “SABBATH ON” to “SABBATH OFF.”
To Activate Sabbath Mode:
1. Press BAKE for the desired oven.
2. Press the number keypads to set the desired temperature. If
the temperature entered is not in the range of the temperatures
allowed, the minimum or maximum allowed temperature will
be displayed. Enter a temperature in the allowable range.
3. Press START for the selected oven.
For timed cooking in Sabbath mode, press COOK TIME, and
then press the number keypads to set the desired cook time.
Press START for the selected oven.
4. (Optional) If Sabbath mode is to be used for both ovens,
repeat steps 1 through 3 for the second oven.
5. Press SETTINGS. Three tones will sound. Then press “7.”
“SAb” will appear in the display.
To Adjust Temperature (when Sabbath mode is running
in only one oven):
1. Press the number keypad as instructed by the scrolling text
to select the new temperature.
NOTE: The temperature adjustment will not appear on
the display and no tones will sound. The scrolling text will
be shown on the display as it was before the keypad was
pressed.
2. Press START for the selected oven.
To Adjust Temperature (when Sabbath mode is running
in both ovens):
1. Press BAKE for the desired oven.
2. Press the number keypad as instructed by the scrolling text
to select the new temperature.
NOTE: The temperature adjustment will not appear on
the display and no tones will sound. The scrolling text will
be shown on the display as it was before the keypad was
pressed.
3. Press START for the selected oven.
To Deactivate Sabbath Mode:
Press SETTINGS, then press “7” to return to regular baking or
press CANCEL UPPER or CANCEL LOWER to turn off the range.
Aluminum Foil
IMPORTANT: To avoid permanent damage to the oven bottom
finish, do not line the oven bottom with any type of foil or liner.
For best cooking results, do not cover entire oven rack with foil
because air must be able to move freely.
Positioning Racks and Bakeware
IMPORTANT: To avoid permanent damage to the porcelain
finish, do not place food or bakeware directly on the oven door
or bottom.
Racks
Position racks before turning on the oven.
Do not position racks with bakeware on them.
Make sure racks are level.
Place food so it will not rise into the broil element. Allow at
least
1
/
2
" (1.3 cm) between pans and the broil element.
To move a rack, pull it out to the stop position, raise the front
edge, and then lift it out. Use the following illustrations and charts
as a guide for positioning racks.
Rack Positions - Upper Oven
Baking and Broiling
Food Rack Position
All foods 1
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
1
2
11
Rack Positions - Lower Oven
Food Rack Position
Large roasts or poultry 1
Roasted meats 2
Most baked goods, casseroles 3
Broiled meats, poultry, fish 4
Broiling/searing meats,
hamburgers, steaks
5
For hamburger patties to have a well-seared exterior and a rare
interior in the lower oven, use a flat rack in rack position 5. Side 1
should cook for approximately 2
1
/
2
to 3
1
/
2
minutes. Side 2 should
cook for approximately 4 to 5 minutes. Expect a moderate degree
of smoke when broiling.
Multiple Rack Cooking
2-rack: Use rack positions 2 and 4 for regular baking.
2-rack (convection only): Use rack positions 2 and 4 for
convection baking.
Baking Layer Cakes on 2 Racks
For best results when baking cakes on 2 racks, use rack positions
2 and 4 with the Convection Bake function. Place the cakes on the
racks as shown.
Baking Cookies on 2 Racks
For best results when baking cookies on 2 racks, use rack
positions 2 and 4 with the Bake function.
Bakeware
To cook food evenly, hot air must be able to circulate. Allow
2" (5 cm) of space around bakeware and oven walls. Use the
following chart as a guide.
Number of Pan(s) Position on Rack
1 Center of rack
2 Side by side
3 or 4 Refer to the previous illustration.
Oven Vents
The oven vents release hot air and moisture from the ovens and
should not be blocked or covered. Blocking or covering the vents
will cause poor air circulation, affecting cooking and cleaning
results. Do not set plastics, paper, or other items that could melt
or burn near the oven vents.
Baking and Roasting
Preheating
When beginning a Bake cycle, the oven will begin preheating
after START is pressed. The oven will take approximately
12 to 15 minutes to reach 350°F (177°C) with all of the oven
racks provided with your oven inside the oven cavity. Higher
temperatures will take longer to preheat. The preheat cycle rapidly
increases the oven temperature. The actual oven temperature
will go above your set temperature to offset the heat lost when
your oven door is opened to insert food. This ensures that when
you place your food in the oven, the oven will begin at the proper
temperature. Insert your food when the preheat tone sounds.
Do not open the door during preheat before the tone sounds.
Rapid Preheat
Rapid Preheat can be used to shorten the preheating time. Only
one standard flat oven rack should be in the oven during Rapid
Preheat. Extra racks should be removed prior to starting Rapid
Preheat. The preheating cycle should be completed before placing
food in the oven. When the Rapid Preheat cycle is complete, the
oven starts a normal Bake cycle.
IMPORTANT: Rapid Preheat should be used only for single-rack
baking.
Oven Temperature
While in use, the oven elements will cycle on and off as needed
to maintain a consistent temperature, but they may run slightly
hot or cool at any point in time due to this cycling. Opening the
oven door while in use will release the hot air and cool the oven
which could impact the cooking time and performance. It is
recommended to use the oven light to monitor cooking progress.
NOTE: On models with convection, the convection fan may run in
the non-convection Bake mode to improve oven performance.
AccuBake
®
Temperature Management System
The AccuBake
®
Temperature Management System electronically
regulates the oven heat levels during preheat and Bake to maintain
a precise temperature range for optimal cooking results. The bake
and broil elements or burners cycle on and off in intervals. On
convection range models, the fan will run while preheating and
may be cycled on and off for short intervals during Bake to provide
the best results. This feature is automatically activated when the
oven is in use.
Before baking and roasting, position racks according to the
“Positioning Racks and Bakeware” section. When roasting, it is
not necessary to wait for the oven preheat cycle to end before
putting food in unless it is recommended in the recipe.
1
2
3
4
5
A
B
A. Upper oven vent
B. Lower oven vent
12
Frozen Bake™ Technology
Frozen Bake™ Technology can be used to cook prepackaged
frozen food without needing to preheat the oven and without
overbrowning the food. There are 4 preprogrammed food options
to choose from: Pizza, Lasagna, Nuggets/Fries, and Pie. Frozen
Bake™ Technology should only be used for these foods. Cook
only 1 package at a time when using Frozen Bake™ Technology.
Use the recommended temperature and maximum recommended
time from the packaging.
A beep will alert you to check the food’s doneness before the
cook time is completed and again at the end of the cook time. The
display will prompt you to add to the cook time or end the cycle.
Broiling
Close the oven door while broiling. No preheating is necessary.
Position food on grid in a broiler pan, and then place it in the
center of the oven rack.
NOTE: Odors and smoke are normal the first few times the oven
is used or if the oven is heavily soiled.
Changing the temperature when broiling allows more precise
control when cooking. The lower the broil setting is, the slower the
cooking. Thicker cuts and unevenly shaped pieces of meat, fish,
and poultry may cook better at lower broil settings. Refer to the
“Positioning Racks and Bakeware” section for more information.
On lower settings, the broil element will cycle on and off to
maintain the proper temperature.
For best results, use a broiler pan and grid. It is designed to
drain juices and help avoid spatter and smoke.
If you would like to purchase a broiler pan, one may be
ordered. See the “Accessories” section.
Lower Oven Convection Cooking
In a convection oven, the fan-circulated hot air continually
distributes heat more evenly than the natural movement of air in a
standard thermal oven. This movement of hot air helps maintain a
consistent temperature throughout the oven, cooking foods more
evenly, crisping surfaces while sealing in moisture, and yielding
crustier breads.
If the oven door is opened during convection cooking, the fan
will turn off immediately. It will come back on when the oven
door is closed.
NOTE: The oven door must be closed for convection broiling.
Position the racks according to the “Positioning Racks and
Bakeware” section before starting convection cooking.
With convection cooking, most foods can be cooked at a lower
temperature or for a shorter length of time.
Cook Time
To Set a Timed Cook:
1. Press the keypad for any cooking function except Self-Clean
or Keep Warm.
2. Press the number keypads to set the desired temperature. If
the temperature entered is not in the range of the temperatures
allowed, the minim or maximum allowed temperature will be
displayed. Enter a temperature in the allowable range.
3. Press COOK TIME.
4. Press the number keypads to enter the length of time to cook.
5. Press START for the desired oven. The display will count
down the time. When the time ends, the oven will shut off
automatically.
The temperature and/or time setting can be changed at any
time by repeating steps 2 through 5.
NOTE: If cooking in both ovens, press any number on the
keypad, then follow the on-screen prompts to select the
desired oven before entering temperature.
6. Press CANCEL for the desired oven to clear the display.
To Set a Delayed Timed Cook:
NOTE: Delayed Timed Cook can only be used for one oven at
a time.
1. Press START TIME.
2. Press the number “1” or “2” keypad to select the desired oven.
3. Press the number keypads to enter the number of hours and/
or minutes you want to delay the start time.
4. Press the keypad for any cooking function except Keep Warm
and Frozen Bake™.
5. Press the number keypads to set the desired temperature. If
the temperature entered is not in the range of the temperatures
allowed, the minimum or maximum allowed temperature will
be displayed. Enter a temperature in the allowable range.
6. Press START for the desired oven or COOK TIME.
7. Press the number keypads to enter the length of time to cook.
8. Press START for the desired oven.
When the start time is reached, the oven will automatically turn
on. The temperature and/or time settings can be changed after
the delay countdown by repeating steps 1 through 7. When
resetting the time and temperature, it is necessary to press
START for the desired oven between steps 4 and 5 to continue
making changes.
When the set cook time ends, the oven will shut off
automatically.
9. Press CANCEL for the desired oven to clear the display.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
13
RANGE CARE
Self-Cleaning Cycle
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off during the Self-Cleaning cycle. Exposure to the
fumes may result in death to certain birds. Always move birds to
another closed and well-ventilated room.
Keep the kitchen well-ventilated during the Self-Cleaning cycle to
help get rid of heat, odors, and smoke.
Do not block the oven vent(s) during the Self-Cleaning cycle. Air
must be able to move freely. Depending on your model, see “Oven
Vent” or “Oven Vents” section.
Do not clean, rub, damage, or move the oven door gasket.
Prepare Range:
Remove the broiler pan, grid, cookware and bakeware, all
cooking utensils, oven racks, aluminum foil, and, on some
models, the temperature probe from the oven.
Use a damp cloth to clean inside door edge and the 1
1
/
2
"
(38 mm) area around the inside oven cavity frame, being
certain not to move or bend the gasket.
Wipe out any loose soil to reduce smoke and avoid damage.
At high temperatures, foods react with porcelain. Staining,
etching, pitting, or faint white spots can result. This will not
affect cooking performance.
Remove plastic items from the cooktop because they
may melt.
NOTE: The cooktop burners will not function during the Self-
Cleaning cycle.
IMPORTANT:
Oven temperature must be below 500°F (260°C) to program
a clean cycle.
Only 1 oven can be cleaned at a time.
Both oven doors will lock when either oven is running the
Self-Cleaning cycle.
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in the
oven may result in discoloring, loss of gloss, hairline cracks, and
popping sounds.
The Precise Clean™ Self-Cleaning cycle is a “one-touch” step that
uses very high temperatures and dissolves soil to a powdery ash.
The Precise Clean™ feature will automatically determine the length
of cleaning time needed based on the number of times the oven
has been used since the last Self-Cleaning cycle. The maximum
clean time is 4 hours and the minimum clean time is 2 hours.
Once the oven has completely cooled, remove ash with a damp
cloth. To avoid breaking the glass, do not apply a cool damp cloth
to the inner door glass before it has completely cooled.
The oven light is disabled during the Self-Cleaning cycle.
To stop the Self-Cleaning cycle at anytime, press CANCEL UPPER
or CANCEL LOWER. If the temperature is too high, the oven doors
will remain locked.
When “LOCK” shows in the display, the doors of the oven cannot
be opened. To avoid damage to the doors, do not force the doors
open when “LOCK” is displayed.
Before self-cleaning, make sure the doors are completely closed
or the doors will not lock and the Self-Cleaning cycle will not
begin.
NOTE: Only one oven can use the Self-Cleaning cycle at a time
and 12 hours must pass before the next Self-Cleaning cycle can
begin.
The oven is preset for a 2-hour Self-Cleaning cycle; however, the
time can be changed. Suggested clean times are 2 hours for light
soil and between 3 hours and 4 hours for average to heavy soil.
Use the following chart as a guide to determine the desired
cleaning level.
Cleaning Level
Recommended Cleaning Time
(Includes a 30-Minute Cool-Down Time)
1 (Quick) 2 hours
2 2 hours 30 minutes
3 3 hours
4 (Reg) 3 hours 30 minutes
5 4 hours
6 (Max) 4 hours 30 minutes
To Self-Clean:
1. Close the oven doors, and then press PRECISE CLEAN.
2. Press the number “1” or “2” keypad to select the desired oven
to clean.
3. Press the number keypads to enter the total cleaning time.
4. Press START for the selected oven.
The oven doors will automatically lock.
When the Self-Cleaning cycle is complete and the oven cools,
the oven doors will unlock.
5. When the oven is completely cooled, remove ash with a
damp cloth.
To Delay Start Self-Clean:
1. Close the oven doors, and then press START TIME.
2. Press the number “1” or “2” keypad to select the desired oven.
3. Press the number keypads to enter the desired amount of time
by which you want to delay the start.
4. Press PRECISE CLEAN.
5. Press the number keypads to enter the total cleaning time.
6. Press START for the selected oven.
The oven doors will automatically lock after the Start Time
countdown.
When the Self-Cleaning cycle is complete and the oven cools,
the oven doors will unlock.
7. When the oven is completely cooled, remove ash with a
damp cloth.
WARNING
Burn Hazard
Do not touch the oven during the Self-Cleaning cycle.
Keep children away from oven during
Self-Cleaning cycle.
Failure to follow these instructions can result in burns.
14
General Cleaning
IMPORTANT: Before cleaning, make sure all controls are OFF and
the oven and cooktop are cool. Always follow label instructions
on cleaning products. For additional information, you can visit our
website at www.whirlpool.com. In Canada, visit our website at
www.whirlpool.ca.
Soap, water, and a soft cloth or sponge are suggested first unless
otherwise noted.
EXTERIOR PORCELAIN ENAMEL SURFACES
(on some models)
Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the entire range is cool. These spills may
affect the finish.
Cleaning Method:
Glass cleaner, mild liquid cleaner, or nonabrasive
scrubbing pad:
Gently clean around the model/serial/rating plate
because scrubbing may remove numbers.
affresh
®
Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See the “Accessories” section for more information.
STAINLESS STEEL (on some models)
NOTE: To avoid damage to stainless steel surfaces, do not use
soap-filled scouring pads, abrasive cleaners, Cooktop Cleaner,
steel-wool pads, gritty washcloths, or abrasive paper towels.
Damage may occur to stainless steel surfaces, even with one-time
or limited use.
Cleaning Method:
Rub in direction of grain to avoid damaging.
affresh
®
Stainless Steel Cleaner Part Number W10355016
(not included):
See the “Accessories” section for more information.
METALLIC PAINT (on some models)
Do not use abrasive cleaners, cleaners with bleach, rust
removers, ammonia, or sodium hydroxide (lye) because
paint surface may stain.
PORCELAIN-COATED GRATES AND CAPS
Food spills containing acids, such as vinegar and tomato,
should be cleaned as soon as the cooktop, grates, and caps
are cool. These spills may affect the finish.
To avoid chipping, do not bang grates and caps against
each other or hard surfaces such as cast iron cookware.
Do not reassemble caps on burners while wet.
Cleaning Method:
Nonabrasive plastic scrubbing pad and mildly
abrasive cleanser:
Clean as soon as cooktop, grates, and caps are cool.
Dishwasher (grates only, not caps):
Use the most aggressive cycle. Cooked-on soils should
be soaked or scrubbed before going into a dishwasher.
Gas Grate and Drip Pan Cleaner Part Number 31617A
(not included):
See the “Accessories” section for more information.
SURFACE BURNERS
See “Sealed Surface Burner” section
COOKTOP CONTROLS
To avoid damage to the cooktop controls, do not use steel wool,
abrasive cleansers, or oven cleaner.
To avoid damage, do not soak knobs. When replacing knobs,
make sure knobs are in the OFF position.
On some models, do not remove seals under knobs.
Cleaning Method:
Soap and water:
Pull knobs straight away from control panel to remove.
CONTROL PANEL AND OVEN DOOR EXTERIOR
To avoid damage to the control panel, do not use abrasive
cleaners, steel-wool pads, gritty washcloths, or abrasive
paper towels.
Cleaning Method:
Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly
on panel.
affresh
®
Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See the “Accessories” section for more information.
OVEN RACKS
Cleaning Method:
Steel-wool pad
For racks that have discolored and are harder to slide,
a light coating of vegetable oil applied to the rack guides
will help them slide.
OVEN CAVITY
Do not use oven cleaners.
Food spills should be cleaned when oven cools. At high
temperatures, foods react with porcelain. Staining, etching,
pitting, or faint white spots can result.
Cleaning Method:
Clean cycle:
See the “Self-Cleaning Cycle” section.
Oven Lights
The oven lights are standard 40-watt appliance bulbs. Before
replacing, make sure the oven and cooktop are cool and the
control knobs are in the OFF position.
To Replace:
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb and then bulb cover by turning clockwise.
5. Plug in range or reconnect power.
15
TROUBLESHOOTING
First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call, refer
to the warranty page in this manual and scan the code there with your mobile device, or visit http://www.whirlpool.com/product_help.
In Canada, visit http://www.whirlpool.ca.
Contact us by mail with any questions or concerns at the address below:
In the U.S.A.:
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
In Canada:
Whirlpool Brand Home Appliances
Customer eXperience Centre
200 - 6750 Century Ave.
Mississauga, Ontario L5N 0B7
Please include a daytime phone number in your correspondence.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Problem Possible Causes and/or Solutions
Nothing will operate
Power supply cord is unplugged: Plug into a grounded 3 prong outlet.
Household fuse is blown or a circuit breaker is tripped: Replace the fuse or reset the circuit breaker. If the
problem continues, call an electrician.
Main or regulator gas shutoff valve is in the OFF position: See the Installation Instructions.
The range is improperly connected to the gas supply: Contact a trained repair specialist, or see Installation
Instructions.
Surface burners
will not operate
The control knob is not set correctly: Push in knob before turning to a setting.
Air in the gas lines: If this is the first time the surface burners have been used, turn on any one of the surface
burner knobs to release air from the gas lines.
Clogged burner ports: See “Sealed Surface Burners” section.
Surface burner
flames are uneven,
yellow, and/or noisy
Clogged burner ports: See “Sealed Surface Burners” section.
Burner caps positioned improperly: See “Sealed Surface Burners” section.
Range converted improperly: If propane gas is being used, contact a service technician or see the
“Warranty” section for contact information.
Excessive heat
around cookware
on cooktop
Cookware is not the proper size: The cookware should be centered above the burner with the bottom sitting
level on the grate. The flame should be adjusted so that it does not extend up the sides of the pan.
Cooktop cooking
results not
what expected
Improper cookware: Ideal cookware should have a flat bottom, straight sides, and a well-fitting lid, and the
material should be of a medium-to-heavy thickness.
Control knob set to incorrect heat level: See the “Cooktop Use” section.
Range is not level: Level the range. See the Installation Instructions.
Oven will not operate
Air in the gas lines: If this is the first time the oven has been used, turn on any one of the surface burner
knobs to release air from the gas lines.
Control is locked: Press and hold START LOWER for 3 seconds to unlock.
Control is in Demo mode: See the “Electronic Oven Controls” section. Demo mode is used for display
models in a showroom.
Electronic oven control set incorrectly: See “Electronic Oven Controls” section.
Oven burner flames
are yellow or noisy
Range converted improperly: If propane gas is being used, contact a service technician or see the
“Warranty” section for contact information.
16
Noises
Problem Possible Causes and/or Solutions
Oven temperature
too high or too low
Oven temperature needs adjustment: See “Oven Temperature Control” in the “Electronic
Oven Controls” section.
Convection fan
not turning on
The convection cycle is in the first 5 minutes of operation: This is normal. The convection fan
will start running approximately 5 minutes into the cycle.
Oven door is open: If the oven door is opened during convection cooking, the fan will turn off immediately.
It will come back on when the oven door is closed.
Display shows
messages
Power failure (display shows flashing time): Clear the display. On some models, reset the clock, if needed.
See “Clock” keypad feature in the “Feature Guide” section.
Error code (display shows letter followed by number): Depending on your model, press CANCEL UPPER
or CANCEL LOWER to clear the display. See “Control Display” in the “Electronic Oven Controls” section. If it
reappears, call for service. See the “Warranty” section for contact information.
Start needs to be pressed so a cycle can begin (display shows “PUSH” or “PSH”): See the “Start” keypad
feature in the “Feature Guide” section.
Range is in Sabbath mode (display shows “SAb”): Press CANCEL UPPER or CANCEL LOWER to exit
Sabbath mode.
Clean cycle did not
work on all spills
Several cooking cycles between clean cycles or spills on oven walls and doors: Run additional clean
cycles. affresh
®
Kitchen and Appliance Cleaner or affresh
®
Cooktop Cleaner can be used for stubborn soils.
See the “Accessories” and “Self-Cleaning Cycle” sections for more information.
Oven cooking results
not what expected
Range is not level: Level the range. See the Installation Instructions.
The set temperature was incorrect: Double-check the recipe in a reliable cookbook.
Oven temperature is calibrated incorrectly: See “Oven Temperature Control” in the “Electronic Oven
Controls” section.
Oven was not preheated: See “Baking and Roasting” section.
Racks were positioned improperly: See “Positioning Racks and Bakeware” section.
Not enough air circulation around bakeware: See “Positioning Racks and Bakeware” section.
Darker browning of food caused by dull or dark bakeware: Lower oven temperature 25°F (15°C)
or move rack to a higher position in the oven.
Lighter browning of food caused by shiny or light colored bakeware: Move rack to a lower position
in the oven.
Batter distributed unevenly in pan: Check that batter is level in the pan.
Incorrect length of cooking time was used: Adjust cooking time.
Oven door was not closed: Be sure that the bakeware does not keep the door from closing.
Oven door was opened during cooking: Oven peeking releases oven heat and can result in longer
cooking times.
Rack is too close to bake burner, making baked items too brown on bottom: Move rack to higher
position in the oven.
Pie crusts browning too quickly: Use aluminum foil to cover the edge of the crust and/or reduce
baking temperature.
Problem Possible Causes and/or Solutions
Surface burner making popping noises
Wet burner: Allow it to dry.
Gas range noises during bake and
broil operations
The following are some normal sounds
with the explanations.
These sounds are normal operational noises that can be heard each time the bake or
broil burners ignite during the cycle.
Pop
Gas valve is opening or cycling on and will make a single pop when it snaps open from
the solenoid. It sounds similar to a suction cup being pulled off of a piece of glass: This
is normal.
Click
The igniters will click several times until the flame is detected. These are short clicking
sounds like tapping a nail onto a piece of glass: This is normal.
Convection fan relay is cycling on and off (on some models): This is normal.
Woosh or poof Bake or broil burner is igniting: This is normal.
Oven burner flames are yellow or noisy
Range converted improperly: If propane gas is being used, contact a service technician or
see the “Warranty” section for contact information.
17
ACCESSORIES
For accessories in the U.S.A., you can visit our website at www.whirlpool.com or call us at 1-800-253-1301.
In Canada, visit our website at www.whirlpool.ca or call us at 1-800-807-6777.
Complete Cooktop Cleaner Kit
(ceramic glass models)
(includes cleaner, protectant, protectant
applicator, scraper, and cleaner pads)
Order Part Number 31605
Cooktop Protectant
(ceramic glass models)
Order Part Number 31463A
affresh
®
Stainless Steel Cleaning
Wipes
(stainless steel models)
Order Part Number W10355049
affresh
®
Cooktop Cleaner
(ceramic glass models)
Order Part Number W10355051
Cooktop Cleaning Pads
(ceramic glass models)
Order Part Number W10391473
affresh
®
Stainless Steel Cleaner
(stainless steel models)
Order Part Number W10355016
affresh
®
Kitchen and Appliance
Cleaner
Order Part Number W10355010
Cooktop Scraper
(ceramic glass models)
Order Part Number WA906B
Granite Cleaner and Polish
Order Part Number W10275756
Gas Grate and Drip Pan Cleaner
Order Part Number 31617A
Cooktop Grates
Left: Order Part Number W10627408
Right: Order Part Number W10627409
Griddle
Order Part Number W10432539
Kit: Order Part Number W10432544
Standard Flat Oven Rack
Order Part Number W10551060
Roll-Out Rack
Order Part Number W10570870
Porcelain Broiler Pan and Grid
Order Part Number 4396923
Premium Broil Pan and Roasting Rack
Order Part Number W10123240
18
11/14
IF YOU NEED SERVICE:
1. Before contacting us to arrange service, please determine whether your product requires repair.
Some questions can be addressed without service. Please take a few minutes to review the
Troubleshooting or Problem Solver section of the Use and Care Guide, scan the QR code on
the right to access additional resources, or visit www.whirlpool.com/product_help.
2. All warranty service is provided exclusively by our authorized Whirlpool Service Providers.
In the U.S. and Canada, direct all requests for warranty service to:
Whirlpool Customer eXperience Center
In the U.S.A., call 1-800-253-1301. In Canada, call 1-800-807-6777.
If outside the 50 United States or Canada, contact your authorized Whirlpool dealer to determine whether another warranty applies.
WHIRLPOOL
®
MAJOR APPLIANCE
LIMITED WARRANTY
ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS
REQUIRED TO OBTAIN WARRANTY SERVICE.
Please have the following information available when you call the
Customer eXperience Center:
Name, address and telephone number
Model number and serial number
A clear, detailed description of the problem
Proof of purchase including dealer or retailer name and address
ONE YEAR LIMITED WARRANTY
WHAT IS COVERED WHAT IS NOT COVERED
For one year from the date of purchase,
when this major appliance is installed,
operated and maintained according to
instructions attached to or furnished
with the product, Whirlpool Corporation
or Whirlpool Canada LP (hereafter
“Whirlpool”) will pay for Factory
Specified Replacement Parts and repair
labor to correct defects in materials or
workmanship that existed when this
major appliance was purchased, or at
its sole discretion replace the product.
In the event of product replacement,
your appliance will be warranted for
the remaining term of the original unit’s
warranty period.
YOUR SOLE AND EXCLUSIVE REMEDY
UNDER THIS LIMITED WARRANTY
SHALL BE PRODUCT REPAIR AS
PROVIDED HEREIN. Service must be
provided by a Whirlpool designated
service company. This limited warranty
is valid only in the United States or
Canada and applies only when the major
appliance is used in the country in which
it was purchased. This limited warranty
is effective from the date of original
consumer purchase. Proof of original
purchase date is required to obtain
service under this limited warranty.
1. Commercial, non-residential, multiple-family use, or use inconsistent with published user,
operator or installation instructions.
2. In-home instruction on how to use your product.
3. Service to correct improper product maintenance or installation, installation not in
accordance with electrical or plumbing codes or correction of household electrical or
plumbing (i.e. house wiring, fuses or water inlet hoses).
4. Consumable parts (i.e. light bulbs, batteries, air or water filters, preservation solutions, etc.).
5. Defects or damage caused by the use of non-genuine Whirlpool parts or accessories.
6. Conversion of products from natural gas or L.P. gas.
7. Damage from accident, misuse, abuse, fire, floods, acts of God or use with products not
approved by Whirlpool.
8. Repairs to parts or systems to correct product damage or defects caused by unauthorized
service, alteration or modification of the appliance.
9. Cosmetic damage including scratches, dents, chips, and other damage to the appliance
finishes unless such damage results from defects in materials and workmanship and is
reported to Whirlpool within 30 days.
10. Discoloration, rust or oxidation of surfaces resulting from caustic or corrosive environments
including but not limited to high salt concentrations, high moisture or humidity or exposure
to chemicals.
11. Food or medicine loss due to product failure.
12. Pick-up or delivery. This product is intended for in-home repair.
13. Travel or transportation expenses for service in remote locations where an authorized
Whirlpool servicer is not available.
14. Removal or reinstallation of inaccessible appliances or built-in fixtures (i.e. trim, decorative
panels, flooring, cabinetry, islands, countertops, drywall, etc.) that interfere with servicing,
removal or replacement of the product.
15. Service or parts for appliances with original model/serial numbers removed, altered or not
easily determined.
The cost of repair or replacement under these excluded circumstances shall be borne by
the customer.
DISCLAIMER OF IMPLIED WARRANTIES
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not
allow limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty gives
you specific legal rights, and you also may have other rights that vary from state to state or province to province.
DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY
Whirlpool makes no representations about the quality, durability, or need for service or repair of this major appliance other than the
representations contained in this warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with
this major appliance, you should ask Whirlpool or your retailer about buying an extended warranty.
LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.
WHIRLPOOL SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the
exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives
you specific legal rights, and you also may have other rights that vary from state to state or province to province.
www.whirlpool.com/product_help
MERCI d’avoir acheté ce produit de grande qualité. Enregistrez la cuisinière sur www.whirlpool.com. Au Canada, enregistrez la
cuisinière sur www.whirlpool.ca.
Pour référence ultérieure, consignez par écrit les numéros de modèle et de série de votre produit. Vous trouvez les numéros de
modèle et de série sur les plaques signalétiques. Les plaques signalétiques se situent derrière le tableau de commande. Il est
possible de les voir en faisant pivoter les plaques signalétiques vers le haut.
Numéro de modèle _____________________________________ Numéro de série du produit ______________________________
Table des matières
INSTRUCTIONS D’UTILISATION
DE LA CUISINIÈRE À GAZ
À DOUBLE FOUR
SÉCURITÉ DE LA CUISINIÈRE ..................................................20
La bride antibasculement ...........................................................21
GUIDE DES CARACTÉRISTIQUES .............................................22
UTILISATION DE LA TABLE DE CUISSON ...............................25
Brûleurs de surface scellés ........................................................25
Grilles en fonte sur charnières EZ-2-Lift™ ................................26
Taille du brûleur ..........................................................................26
Ustensiles de cuisson ................................................................26
Mise en conserve à la maison....................................................27
UTILISATION DU FOUR ...............................................................27
Commandes électroniques du four ...........................................27
Maintien au chaud ......................................................................29
Mode Sabbat ..............................................................................29
Papier d’aluminium ....................................................................30
Positionnement des grilles et
des ustensiles de cuisson au four .............................................30
Évent du four ..............................................................................31
Cuisson au four et rôtissage ......................................................31
Cuisson au gril ............................................................................32
Cuisson par convection - four inférieur .....................................32
Durée de cuisson .......................................................................32
ENTRETIEN DE LA CUISINIÈRE .................................................33
Programme d’autonettoyage .....................................................33
Nettoyage général ......................................................................34
Lampes des fours ......................................................................35
DÉPANNAGE .................................................................................35
ACCESSOIRES .............................................................................38
GARANTIE .....................................................................................39
20
SÉCURITÉ DE LA CUISINIÈRE
Risque possible de décès ou de blessure grave si vous ne
suivez pas immédiatement les instructions.
Risque possible de décès ou de blessure grave si vous
ne suivez pas les instructions.
Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de blessure et
ce qui peut se produire en cas de non-respect des instructions.
Votre sécurité et celle des autres est très importante.
Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de
toujours lire tous les messages de sécurité et de vous y conformer.
AVERTISSEMENT
DANGER
Voici le symbole d’alerte de sécurité.
Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à vous
et à d’autres.
Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou
“AVERTISSEMENT”. Ces mots signifient :
AVERTISSEMENT : Si les renseignements dans ce manuel ne sont pas exactement
observés, un incendie ou une explosion peut survenir, causant des dommages au
produit, des blessures ou un décès.
Ne pas entreposer ni utiliser de l’essence ou d’autres vapeurs ou liquides inflammables
à proximité de cet appareil ou de tout autre appareil électroménager.
QUE FAIRE DANS LE CAS D’UNE ODEUR DE GAZ :
Ne pas tenter d’allumer un appareil.
Ne pas toucher à un commutateur électrique.
Ne pas utiliser le téléphone se trouvant sur les lieux.
Appeler immédiatement le fournisseur de gaz à partir du téléphone d'un voisin. Suivre
ses instructions.
À défaut de joindre votre fournisseur de gaz, appeler les pompiers.
L’installation et l’entretien doivent être effectués par un installateur qualifié, une agence
de service ou le fournisseur de gaz.
AVERTISSEMENT : L’odorat ne permet pas toujours la détection d’une fuite de gaz.
Les distributeurs de gaz recommandent l’emploi d’un détecteur de gaz (homologation UL ou CSA).
Pour d’autre information, contacter le fournisseur de gaz local.
En cas de détection d’une fuite de gaz, exécuter les instructions “Que faire dans le cas d’une odeur de gaz”.
Avertissements de la proposition 65 de l'État de Californie :
AVERTISSEMENT : Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de
cancers.
AVERTISSEMENT : Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de
malformations et autres déficiences de naissance.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

Whirlpool WGG745S0FS Mode d'emploi

Catégorie
Cuisinières
Taper
Mode d'emploi

dans d''autres langues