Blueair 3231101000 Manuel utilisateur

Blue Pure

311 Auto/411 Auto

User Manual

3

EN

Blue Pure 311 Auto/411 Auto 4

Safety instructions 6

Get started 8

Filters 11

Care and maintenance 15

Disposal and recycling 17

Help and support 17

Warranty information 17

Speciﬁcation 18

Regulatory information 19

Content

Please read this user manual carefully and keep it for future reference.

The latest version of this user manual can be found on www.blueair.com

Note: There may be local variations of these models.

Product name: Regulatory model number:

311 Auto 3431101000

411 Auto 3231101000

4

Blue Pure 311 Auto/411 Auto

Blue Pure air puriﬁers are available in two models. All models have a pre-ﬁlter and a

HEPASilent

TM

main ﬁlter to purify air. All Blue Pure models have control functions and a built in

sensor.

The air puriﬁer is mainly composed of a motor, a fan and ﬁlters. The air puriﬁer removes

contaminants from the air in a room to improve indoor air quality.

You can change the air puriﬁer settings at any time, using the control panel on the air puriﬁer

Recommendations for best performance

• Use the air puriﬁer in a room that does not exceed the room size recommendation.

• Place the air puriﬁer in a location where air can circulate freely in, out and around the air

puriﬁer.

• Do not place the air puriﬁer closer than 10 cm (4 inches) to another object.

• During operation, keep doors and windows in the room with the air puriﬁer closed.

• Only use original Blueair ﬁlters.

• Change the main ﬁlter when the ﬁlter replacement indicator appears on the control

panel.

• Follow the maintenance instructions in this user manual.

5

A Touch button F Main ﬁlter (Particle + Carbon ﬁlter)

B Air outlet G Pre-ﬁlter

C Air quality indicator H Air quality sensor

D Fan and motor I Power cable (not in picture)

E Filter shelf ring J User Manual (not in picture)

E

F

A

B

C

D

H

G

6

Safety instructions

Blue Pure 311 Auto/411 Auto air puriﬁers are electrical appliances for

indoor use only, take the necessary precautions to reduce the risk of

ﬁre, electric shock or injury.

• This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety.

• Supervise children to ensure that they do not play with the

appliance.

• Cleaning and user maintenance shall not be made by children

without supervision.

• Always disconnect the appliance from the power supply before

maintenance.

• Do not attempt to open or service the appliance yourself. Service

must be done by the manufacturer, service agent or similarly

qualiﬁed personnel using only original Blueair spare parts.

• Ensure that the power cable and the power plug are not at risk of

getting damaged. To avoid hazard, a damaged power cable must

always be replaced by the manufacturer, service agent or similarly

qualiﬁed person.

• If the appliance is damaged or malfunctions, turn it o, disconnect

it from the power supply and contact Blueair.

• The power plug must be ﬁrmly inserted in the power socket.

7

• When disconnecting the unit from the power supply, do not pull on

the power cord, pull on the power plug.

• Use the power cable provided with your Blueair air puriﬁer to plug

directly and ﬁrmly into an appropriate, electrical outlet.

• Do not use an extension cord or a power strip. Refer to the rating

label on your appliance.

• Do not alter the power plug in any way. If the plug does not ﬁt into

the outlet, contact qualiﬁed personnel to install the proper outlet.

• Do not use the included power cord for anything else but the

appliance.

• Do not allow objects to enter or block the air inlets and air outlets

as this can cause electric shock or damage the appliance.

• Do not place any objects on top of or directly against the

appliance.

• Do not sit on, stand, climb onto or hang from the appliance.

• Keep the appliance, including the power cable, at a safe distance

from heated surfaces and open ﬁre.

• Keep the appliance and power plug away from water and other

liquids.

• Keep the appliance and power plug away from chemicals such as

pesticides and deodorants.

• Place the appliance on the ﬂoor. The appliance must be placed on

a stable surface.

• Do not use the appliance outdoors or in wet environments such as

bathrooms, laundry rooms or pool areas.

8

Get started

Step 1

Plug the power cable

into a wall outlet.

Step 2

Press the button to

turn the air puriﬁer

on and adjust the fan

speed mode.

The autostart feature automatically restarts the air puriﬁer at the last set speed if it has

been unplugged, used with a power switch timer, or if a power failure occurs.

In auto mode the air puriﬁer automatically controls the airﬂow based on air quality

information from the sensor.

Autostart

Auto mode

Available settings are: Auto, Night, Everyday, Boost and O.

The indicator lights on the touch button indicate the selected fan speed. The lights

automatically dim down completely 5 seconds after pressing the touch button, indicating a

deactivated fan speed control mode. Press the touch button once to reactivate on/o and

fan speed control. The indicator lights light up and you can adjust the fan speed mode again.

On/O and fan speed controls

9

Press once to turn the unit On and to set it to Auto mode.

On/Auto mode

Press twice to set to Night mode (low fan speed)

Night mode

Press three times to set to Everyday mode (medium fan speed).

Everyday mode

Press four times to set to Boost mode (high fan speed).

Press ﬁve times to turn the unit O.

Boost mode

O

10

Air quality information

The air quality levels for particulate matter (PM) are indicated using a color scale on the air

quality indicator. The air quality indicator is completely dimmed in Night mode.

Air quality level (PM 2.5)

PM2.5, Particulate matter, particles with diameter of size 2.5 micrometers or less.

Polluted

Moderate

Good

11

Button control functions

Filters

The air puriﬁer is delivered with a fabric pre-ﬁlter and a main ﬁlter. The ﬁlters purify the air

from both particles and gases. For best performance, clean the pre-ﬁlters regularly and

change the main ﬁlter when the air puriﬁer indicates ﬁlter change. For best performance,

clean the pre-ﬁlters regularly and change the main ﬁlter when the air puriﬁer indicates ﬁlter

change.

To ﬁnd the right main ﬁlter for your air puriﬁer, use the Blueair app or visit www.blueair.com.

The model number of your air puriﬁer can be found on the rating label on the air puriﬁer.

Change ﬁlter

When the indicator

light turns red (after 6

months of operation)

you should change the

main ﬁlter.

Filter replacement

indicator

Press the button down

for 7 seconds to reset

the ﬁlter replacement

indicator.

Blueair ﬁlter subscription program

Use the Blueair app or visit www.blueair.com to sign up for the Blueair ﬁlter subscription

program. (Not available in all markets)

Important! Always turn o and disconnect the appliance from the power supply before

changing ﬁlters, cleaning or carrying out maintenance procedures.

12

Clean and change the pre-ﬁlters

For best performance, clean the pre-ﬁlter regularly. Vacuum the exterior of the fabric pre-

ﬁlter with a soft brush attachment to remove dust. If the pre-ﬁlter requires a deeper clean,

wash it on a gentle, low-temperature cycle in the washing machine.

Important! Press the Velcro strips together on the pre-ﬁlter before machine wash.

Step 5

Wash the pre-ﬁlter in the

washing machine, according

to instructions on the pre-

ﬁlter´s label.

Step 1

Turn the unit o and unplug

it.

Step 3

Remove the top cylinder from

the unit.

Step 2

Carefully push the top

cylinder down while rotating

counterclockwise to unlock.

Step 6

Place the pre-ﬁlter back onto

the unit.

Adjust the pre-ﬁlter and the

panel to hide the power cord

in the back.

Step 7

Carefully push the top

cylinder down, at the

same time rotating it

clockwise to secure it back

into the lock.

Step 8

Plug in the unit.

Step 4

Open the pre-ﬁlter panel and

remove the pre-ﬁlter.

13

Change the main ﬁlter

When changing the ﬁlter, vacuum any dust that may have accumulated inside the unit.

Important! Use only original Blueair ﬁlters suitable for the model to ensure proper function

and performance of the air puriﬁer, and to qualify for full warranty coverage.

Step 5

Open the pre-ﬁlter panel and

remove the pre-ﬁlter.

Step 7

Grip the ﬁlter handles and

pull upwards to remove the

main ﬁlter from the inner

structure.

Step 1

When the indicator light

glows red, it’s time to change

the main ﬁlter.

Step 3

Carefully push the top

cylinder down while rotating

counterclockwise to unlock.

Step 2

Turn the unit o and unplug

it.

Step 6

Carefully remove the ﬁlter

shelf ring.

Step 8

Position the new main ﬁlter

onto the inner structure.

The ﬁlter handles should

face upwards.

Step 4

Remove the top cylinder

from the unit.

14

Step 13

Press the touch button for

a duration of 7 seconds to

reset the ﬁlter replacement

timer.

This lets the air puriﬁer know

that you have changed the

ﬁlter.

The indicator light ﬂashes for

4 seconds, and then changes

from red to white.

Step 9

Press the ﬁlter shelf ring

ﬁrmly into position above the

main ﬁlter. The ﬁlter shelf ring

protects the top edge of the

main ﬁlter from damage.

Step 11

Carefully push the top

cylinder down while rotating

clockwise to secure the lock.

Step 10

Place the pre-ﬁlter back onto

the unit.

Adjust the pre-ﬁlter and the

panel to hide the power cord

in the back.

Step 12

Plug in the unit.

15

Care and maintenance

General

• Disconnect the air puriﬁer from the power supply before maintenance.

• Do not allow foreign objects to enter the air inlets or air outlets. This may cause electric

shock or damage the air puriﬁer.

• Never clean with gasoline, chemical solvents or corrosive materials as these agents may

damage the air puriﬁer.

• Make sure the air puriﬁer is completely dry before connecting it to power.

• Do not wash the main ﬁlter. The main ﬁlter is not washable or reusable.

Cleaning

• Wash the pre-ﬁlter according to the instructions on the pre-ﬁlter´s label or vacuum the pre-

ﬁlter with a soft brush attachment.

• Wipe the exterior of the air puriﬁer with a soft, clean, damp cloth.

• Clean and check the power cable and power plug for wear or damages.

• Clean the sensor when changing the main ﬁlter.

16

Clean the air quality sensor

The inlet for the air quality sensor is located at the back of the air puriﬁer.

Important! Do not use ﬁngers or any unrecommended objects to clean inside the sensor inlet.

Step 3

Remove the top cylinder

from the unit.

Step 4

Press the button on the

inside of the unit to open

the lid covering the sensor

and remove the lid.

Step 5

Gently clean the sensor with

a cotton swab, and attach

the sensor lid

Step 2

Carefully push the top

cylinder down while rotating

counterclockwise to unlock.

Step 6

Carefully push the top

cylinder down while

rotating clockwise to

secure the lock.

Step 7

Plug in the unit.

Step 1

Turn the unit o and unplug

it.

17

Warranty information

The Blueair Limited Warranty applies only if the air puriﬁer is installed, used and maintained

according to the instructions in this manual.

For warranty conditions, please visit www.blueair.com/warranty

Warranty and returns

If you purchased the air puriﬁer at one of our authorized retailers, please contact the same

store to request assistance.

Help and support

If you have questions about your product, please visit www.blueair.com or contact your local

Blueair retailer.

To contact Blueair for personalized support, please visit www.blueair.com/customer-support

This air puriﬁer should be recycled as electronic waste and the ﬁlter recycled as plastic

according to local regulations. If you have questions regarding the disposal of this air puriﬁer,

please contact your local authorities or Blueair dealer and ask for the correct method of

recycling.

Disposal and recycling

18

Speciﬁcations

Blue Pure 311 Auto Blue Pure 411 Auto

Input Power, Frequency 100-240V 50/60Hz 100-240V 50/60Hz

Power consumption/

Rated input power

3-35W 2-10W

Sound level (min/max)

1

23-53 dB 18-48 dB

Recommended room size

2

36 m

2

(388 ft

2

) 17 m

2

(190 ft

2

)

CADR Smoke

2

250 cfm (425 m

3

/h) 123 cfm (210 m

3

/h)

CADR Dust

2

250 cfm (425 m

3

/h) 107 cfm (181 m

3

/h)

CADR Pollen

2

244 cfm (415 m

3

/h) 96 cfm (163 m

3

/h)

1

Sound pressure according to GB/T18801 and GB4214.1

2

According to ANSI/AHAM AC-1-2019

19

Regulatory information

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and

2. this device must accept any interference received, including interference that may cause

undesired operation.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science

and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two

conditions: (1) This device may not cause interference, and (2) This device must accept any interference,

including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

WARNING: Changes or modiﬁcations to this unit not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

20

.

La page charge ...

Blueair 3231101000 Manuel utilisateur

Blueair 3231101000 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents