Brandt TI1016B Le manuel du propriétaire

Catégorie
Plaques de cuisson
Taper
Le manuel du propriétaire

Ce manuel convient également à

EN GUIDE TO INSTALLATION AND USE
Cooking Hob
2
Dear Customer,
You have just acquired a
BBRRAANNDDTT
hob and we would like to thank you.
We have invested all our dedication and know-how in this appliance so that it would
best meet your needs. With innovation and performance, we designed it to be
always easy to use.
In the
BBRRAANNDDTT
product range, you will also find a wide choice of ovens, microwa-
ves, ventilation hoods, cookers, dishwashers, washing machines, driers, fridges and
freezers, that you can coordinate with your new
BBRRAANNDDTT
hob
Visit our website
wwwwww..bbrraannddtt..ccoomm
where you will find all of our products, as well as
useful and complementary information.
BBRRAANNDDTT
As part of our commitment to constantly improving our products, we reserve the
right to make changes to them based on technical advances to their technical and
functional features and appearance.
Warning
Before installing and using your appliance, please carefully read this Guide
to Installation and Use, which will allow you to quickly familiarise yourself with its
operation.
EN
3
TABLE OF CONTENTS
Safety Guidelines
____________________________________________________
04
Environmental Protection
_____________________________________________
04
After Sales Service
__________________________________________________
05
Description of Your Appliance
_________________________________________
05
1 / INSTALLING YOUR APPLIANCE
Proper positioning
___________________________________________________
06
Building in
__________________________________________________________
06
Hook-up
___________________________________________________________
07
2 / USING YOUR APPLIANCE
Description of the top
_________________________________________________
08
Cookware for induction
_______________________________________________
09
Which cooking zone should you use based on your cookware?
_____________
09
Description of control panel
___________________________________________
10
Powering on /Stop
___________________________________________________
10
Adjusting the power
_________________________________________________
10
Adjusting the timer
__________________________________________________
11
Child safety use
_____________________________________________________
12
Safety during operation
_______________________________________________
13
3 / DAILY CARE OF YOUR APPLIANCE
Protecting your appliance
_____________________________________________
14
Maintaining your appliance
____________________________________________
14
4 / SPECIAL MESSAGES, DIFFICULTIES
During initial use
____________________________________________________
15
When powering on
___________________________________________________
15
During operation
____________________________________________________
15
5 / COOKING CHART
Cooking chart for food types
__________________________________________
16
EN
4
This appliance's packaging material is recy-
clable. Help recycle it and protect the environ-
ment by dropping it off in the municipal recep-
tacles provided for this purpose.
Your appliance also contains a
great amount of recyclable mate-
rial. It is marked with this label to
indicate the used appliances that
should not be mixed with other
waste. This way, the appliance recy-
cling organised by your manufactu-
rer will be done under the best possible
conditions, in compliance with European
Directive 2002/96/EC on Waste Electrical and
Electronic Equipment. Contact your town hall
or your retailer for the used appliance collec-
tion points closest to your home.
We thank you doing your part to protect the
environment.
FFoorr AAuussttrraalliiaa oonnllyy ::
- Young children should be supervised to ensure that they do not play with the appliance.
- The appliance is not intended for use by young children or infirm person without supervision.
- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or
a similarly qualified person in order to avoid hazard.
- Do not install the product if you see any damage on it.
FFoorr SSeerrvviiccee iissssuueess,, pphhoonnee nnuummbbeerr :: 11330000 555533 772200,, ffaaxx nnuummbbeerr :: 11330000 555533 771199
SAFETY GUIDELINES
We have designed this cooking hob for use by
private persons in their homes.
These cooking hobs are meant to be used
exclusively for cooking beverages and foods-
tuffs and do not contain any asbestos-based
materials.
This appliance is not intended to be used by
persons (including children) with reduced phys-
ical, sensory or mental abilities, or persons
lacking experience or awareness, unless using
it with the help of a person reponsible for their
safety, or under supervision and with prior
instruction in its use. Children should be super-
vised to ensure that they do not play with the
appliance.
Residual heat
A cooking zone can remain hot for several
minutes after use.
An
""HH""
is displayed during this period.
Avoid touching the hot areas during this time.
Child safety device
Your hob is equipped with a child safety
device that locks its operation after use or
during cooking (See " Child Safety use" sec-
tion).
Do not forget to unlock it before using the
hob again.
For users of pacemakers and
active implants
The functioning of the hob conforms to cur-
rent electromagnetic interference standards
and thus is in total compliance with legal
requirements (89/336/CEE directives).
In order to avoid interference between your
cooking hob and a pacemaker, your pacema-
ker must be designed and programmed in
compliance with the regulations that apply to
it.
Consequently, we can only guarantee that our
own product is compliant.
With regard to the compliance of the pacema-
ker or any potential incompatibility, you can
obtain information from the manufacturer or
your attending physician.
Electrical Danger
Ensure that the power cables of any
electrical appliances plugged in close to
the hob are not in contact with the cooking
zones.
If a crack appears in the glass worktop,
immediately disconnect your appliance to
avoid the risk of electric shock.
To do this, remove the fuses or use the cir-
cuit breaker.
Do not use your hob until you have repla-
ced the glass worktop.
ENVIRONMENTAL PROTECTION
EN
5
DESCRIPTION OF YOUR APPLIANCE
B
C
B
A
A
D
Air intake
Air outlet
Vitroceramic glass
Power cord
A
B
C
D
Any maintenance on your equipment should be undertaken by:
- either your dealer,
- or another qualified mechanic who is an authorized agent for the brand appliances.
When making an appointment, state the full reference of your equipment (model, type and serial
number). This information appears on the manufacturer's nameplate attached to your equipment.
AFTER-SALES SERVICE
EN
6
11
/ INSTALLING YOUR APPLIANCE
On 30, 38, 80 and 90 cm models, ensure that the
upper rail across the front of the cabinet does not
impede the air flow. If necessary, cut a chamfer.
CHOOSING THE POSITION
The distance between the edge of your appliance
and the side and rear walls (or partitions) must be
at least four centimetres (zone A).
YYoouurr aapppplliiaannccee mmaayy bbee bbuuiilltt iinn wwiitthhoouutt aannyy rreessttrriicc--
ttiioonn.. CChheecckk,, hhoowweevveerr,, tthhaatt tthhee aaiirr iinnttaakkee aanndd
oouutt--
lleett aarree ffrreeee ooff oobbssttrruuccttiioonn ((sseeee ddeessccrriippttiioonn ooff
yyoouurr aapppplliiaannccee cchhaapptteerr))..
The building-in method opposite is recommended
for use above an oven or a built-in appliance.
BUILDING-IN
Follow the diagram above.
Glue the foam seal underneath your appliance, fol-
lowing the perimeter of the hole in the worktop,
upon which your appliance will rest. This will
ensure a good seal against the worktop.
Attach the clips to the hob
(depending on the
model
).
4 cm
4 cm
4 cm
Entrée d'air
Sortie d'air
4
cm
A
vveennttiillaattiioonn ssppaaccee
5511
5588//7777
4499
66,,44
AAbboovvee aann oovveenn
MIN 4 mm
AAbboovvee aa ccaabbiinneett
wwiitthh aa ddoooorr oorr ddrraawweerr
Tip
If your hob is located above your oven, the hob’s thermal safety devices can impede the
simultaneous use of the hob and the oven’s pyrolysis program.
Your hob is equipped with an anti-overheating safety system.
This safety device can trigger, for example, when the hob is installed over an oven that is not suf-
ficiently insulated. If this occurs, a series of small lines appears on the control panel. In such cir-
cumstances we recommend that you increase the hob’s ventilation by creating an opening in the
side of the cabinet, (8 x 5 cm), and/or installing an oven insulation kit available from the after-sales
department.
Air outlet
Air intake
5566//7755
EN
7
11
/ INSTALLING YOUR APPLIANCE
Separate the two phase wires (L1 and L2)
before hooking up.
NNeeuuttrraall
EEaarrtthh
PPhhaassee
NN
LL
Green/yellow
Blue
Black-grey
Brown
NNeeuuttrraall
EEaarrtthh
PPhhaassee
NN
LL11
LL22
Blue
Green/yellow
Black-grey
Brown
220-240 V monophase hook-up
~
-
Warning
If the power cable is damaged, it
should be replaced by the manufacturer, its
after-sales service department or by a per-
son with similar qualifications to avoid dan-
ger.
For a 400 V 2N triphase hook-up, if your hob
malfunctions, check that the neutral conduc-
tor is properly connected.
These hobs must be connected to the power
grid via an electrical outlet that complies with
EIC publication 60083 or an all-pole cut-off
device that complies with installation regula-
tions in effect.
When power is first supplied to your hob, or
after an extended power outage, an indicator
light will appear on the control panel. It auto-
matically disappears after approximately 30
seconds, or as soon as any touch control on
the control panel is pressed. This display is
normal and, if needed, serves as an indication
to the after-sales service staff. In all cases,
the user of the hob should disregard it.
HOOK-UP
NNeeuuttrraall
EEaarrtthh
PPhhaassee
NN
LL
Green/yellow
Blue
Brown
hook-up 400V 2N
~
-
16A
32A
16A
Separate the wires before hooking up.
NNeeuuttrraall
EEaarrtthh
PPhhaassee
NN11
LL11
LL22
Blue
Green/yellow
Black-grey
Brown
hook-up 2x230V 2L+2N
~
-
16A
NN22
hook-up 400V 3
~
-
16A
EN
8
22
/ USING YOUR APPLIANCE
DESCRIPTION OF THE TOP
00194
TI1082
1166 ccmm
50 W à 2200 W
2211 ccmm
50 W à 3100 W
1188 ccmm
50 W à 2800 W
2211 ccmm
50 W à 3100 W
00198
TI1016
1188 ccmm
50 W à 2800 W
1188 ccmm
50 W à 2800 W
2211 ccmm
50 W à 3100 W
1166 ccmm
50 W à 2200 W
EN
9
22
/ USING YOUR APPLIANCE
Tip
To check the suitability of your cook-
ware:
Place the vessel on a cooking zone at
power level 4.
If the display remains on, your cookware is
compatible.
If the display flashes, your cookware cannot
be used with induction cooking.
You can also use a magnet to test the cook-
ware.
If a magnet "sticks" to the bottom of the
cookware, it is compatible with induction.
WHICH COOKING ZONE
SHOULD YOU USE BASED ON
YOUR COOKWARE?
COOKWARE FOR INDUCTION
The induction principle
The principle of induction is based on a
magnetic phenomenon.
When you place your cookware on a cooking
zone and you turn it on, the electronic boards
in your cooking hob produce "induced" cur-
rents in the bottom of the cookware and ins-
tantly raise its température. This heat is then
transferred to the food, which is simmered or
seared depending on your settings.
Cookware
Most cookware is compatible with induction.
Only glass, terra cotta, aluminium without a
special finish on the bottom, copper and
some non-magnetic stainless steels do not
work with induction cooking.
We recommend that you select cookware
with a thick, flat bottom. The heat will be dis-
tributed better and cooking will be more uni-
form.
By choosing cookware that displays this logo
on its bottom or on its packaging, you can be
certain that it is perfectly compatible with
your hob under normal operating conditions.
To help you choose, a list of cookware is pro-
vided with this guide.
+
-
C
B
A
Inductor
Electronic board
Induced electric current
A
B
C
Cooking Cookware to use
zone *
1166 ccmm 1100 .......... 1188 ccmm
1188 ccmm 1122 .......... 2222 ccmm
2211 ccmm 1188 .......... 2244 ccmm
2233 ccmm 1122............ 2266 ccmm
2288 ccmm 1122 .......... 3322 c
cmm
* (depending on the model
)
10
22 //
USING YOUR APPLIANCE
N.B.:
The power levels must be between:
- 1 and 7 for the first touch.
- 8 and 12 for the second.
PREHEATING
This feature allows you to raise the tempera-
ture of your preparation quickly, so that you
can proceed with your cooking at the power
level you have chosen.
To use it:
--
After setting the power to 12, choose the
PPCC
” pre-heating function by pressing the “+”
button a second time.
The display will show “PC”.
- As long as this is displayed, you can change
your cooking power level.
--
A Beep confirms the setting.
--
The display flashes alternately between “
PPCC
and your cooking power level: you are in the
pprree--hheeaattiinngg
” phase.
- At the end of the automatic pre-heating
phase, your hob now only displays the cook-
ing power level that you had selected original-
ly. You have now come back to normal cook-
ing mode.
WWAARRNNIINNGG
-- WWhheenn tthhee ddiissppllaayy sshhoowwss PPCC ((pprree--
hheeaattiinngg)),, iiff yyoouu ddo
o nnoott sseett tthhee ccooookkiinngg ppoowweerr
lleevveell,, tthhee ccooookkiinngg zzoonnee wwiillll ttuurrnn ooffff..
-- TThhee pprree--hheeaattiinngg ttiimmee iiss ccaallccuullaatte
edd aauuttoommaattii--
ccaallllyy bbyy yyoouurr hhoobb ddeeppeennddiinngg oonn tthhee ccooookkiinngg
ppoowweerr lleevveell cchhoosseenn..
-- TThhee pprree--hheeaattiinngg ffuunnccttiioonn ccaannnnoott bbee uusseedd iiff
tthhee ccooookkiinngg ppoowweerr lleevveell iiss lleessss tthhaann 66..
-- IIff yyoouu pprreessss tthhee ppoowweerr bbuuttttoonnss wwhhiillee pprree--
hheeaattiinngg iiss uunnddeerrwwaayy,, tthhiiss pprree--hheeaattiinngg wwiillll bbee
ccaanncceelllleedd.. YYoouu ccoommee bbaacckk ttoo nnoorrmmaall ppoowweerr
sseettttiinngg mmooddee..
Tip
If you are using several receptacles
on the hob at the same time, try to use
cooking zones located on opposite sides.
On the same side, using the booster in
one zone automatically limits the the
cooking power level of the other zone visi-
ble in the display. This automatic limitation
also applies when the pre-heating function
is used.
OPERATION
Press the on/off button for the cooking zone
you want to use. A flashing
00
and a beep indi-
cate that the cooking zone is on. You can then
choose the desired power level.
If you do not select a power level, the cooking
zone will automatically shut off after a few
seconds.
OFF
Press the on/off button for the cooking zone
used or the
--
power button until
00
is dis-
played.
ADJUSTING THE POWER LEVEL
Press the power
--
or
++
buttons.
When it is switched on you can move directly
to maximum power “12” by pressing the
--
button.
Adjusting the power preset set-
tings
This function allows you to modify the power
levels defined in the preset settings (except
for the BOOST).
- Your cooking zone must be turned off.
- Select the preselection or to modi-
fy, by keeping your finger on it.
- Set the new power setting by pressing on
the
++
or
--
button.
- A beep will confirm your action after a few
moments.
DESCRIPTION OF THE CONTROL
S
On/Off button.
Power level buttons.
Power level preset setting buttons
Timer buttons.
A
B
C
A B
D
D
C
EN
11
22 //
USING YOUR APPLIANCE
SETTING THE TIMERS
Each cooking zone has its own timer. It can
be used as soon as the cooking zone is
turned on.
To turn it on or change the timing, press the
++
“ or “
--
” buttons on the timer.
When setting longer cooking times, you can
get to 99 min directly by pressing the “
--
” but-
ton straight away.
When the cooking is finished, 0 is displayed
and a beep sounds. To cancel this informa-
tion, press any button for the particular cook-
ing zone being used. Otherwise, the informa-
tion will disappear after a few moments.
To stop the timer manually, press “
++
” and “
--
” at
the same time or return to 0 using the “
--
” but-
ton.
TEMPO
This function displays the time elapsed since
the last time the power setting was adjusted
for a given hotplate.
To use this function, press the button.
The time that has passed flashes on the timer
display for the chosen burner.
If you want cooking to end in a specific period,
press the button then, in 5 seconds,
press “
++
” on the timer to increase the cooking
time that you wish to set. The time will display
for 3 seconds, then the remaining cooking
time will appear. A beep will confirm your
choice.
This function can be used with or without the
timer.
Note: If a time is displayed on the timer, this
time cannot be modified for 5 seconds after
the button has been pressed. After these
5 seconds have elapsed, you can modify your
cooking time.
EN
EN
12
22
/ USING YOUR APPLIANCE
CHILD SAFETY” USE
Your hob has a child safety
device which locks the controls
when the hob is not in use (when
cleaning for example) or when it
is being used for cooking (to
maintain your settings). Due to safety reasons,
only the “stop” control is always active. It
authorises a heating zone to be switched off
even when the hob is locked.
How do you lock your hob?
Maintain pressure on the lock key until the led
on top lights up and a beep confirms your
maneouver.
Hob locked when in operation
The display of cooking zones in operation
alternately indicates power and the locking
symbol .
When you press the
ppoowweerr
or
ttiimmeerr
controls
for the zones in operation, the lock led lights
up. It will switch off after a few seconds.
Only the “stop” control remains on at all times.
For cooking zones that are not in operation,
the symbol and the led light up when you
press the “
ssttaarrtt//ssttoopp
” controls
This display will switch off after a few
seconds.
The hob is locked when switched
off
The led above the lock key is switched off.
Press this control briefly to switch on the led.
The led displays when you press the
ssttaarrtt //
ssttoopp
key in any zone.
How do you unlock your hob?
Press the lock control until the led switches off
and a double beep confirms your maneouver.
Tip
Remember to unlock your hob
before using it again (see chapter on
“child safety use”).
CLEAN LOCK
This function allows you to temporarily lock
your hob while cleaning.
To activate Clean lock:
- Your cooking hob must be turned on or off.
- Briefly press touchpad , A beep sounds
and an indicator appears.
- After a predefined time, the lock will auto-
matically disengage. A beep sounds and the
indicator goes out.
- You can stop the Clean lock by holding down
the button .
EN
13
22
/ USING YOUR APPLIANCE
SAFETY DURING OPERATION
Residual heat
After intensive use, the cooking zone that you
have just used can remain hot for several min-
utes.
An
""HH""
is displayed during this period.
Avoid touching the hot areas during this time.
Temperature limiter
Each cooking zone is equipped with a safety
sensor that constantly monitors the tempera-
ture of the bottom of the cookware. In the
event that an empty vessel is left on a cooking
zone that is on, this sensor automatically
adjusts the power output of the hob, thereby
avoiding any risk of damage to the cookware
or the hob.
"Small Items" safety
A small object (such as a fork, a spoon, a ring,
etc.) left alone on the hob is not detected as a
piece of cookware.
The display flashes and no heat is produced.
Warning
Several small objects together on a
cooking zone may be detected as cook-
ware.
If the display remains on: power may be
supplied and the objects may be heated.
Protection against overflows
The hob may shut down (with
the adjacent symbol in the
display) automatically in any
of these three situations:
--
Overflow that spills onto the touch controls.
- Damp towel placed over the touch controls.
- Metallic object placed on the touch con-
trols.
Clean the hob or remove the object, then
begin cooking again.
Auto-Stop system
If you forget to switch off a cooking zone,
your hob has an "
AAuuttoo--SSttoopp ssyysstteemm
" safety
function which automaticallty cuts off the
power to the cooking zone, after a predefined
period (between 1 and 10 hours depending
on the power used).
If this safety system is used, the cutoff to the
cooking zone is displayed as "
AASS
" or "
AA
" on
the control panel and a "bip" sounds for about
2 minutes. Simply press any of the control
buttons to stop this.
A double bip will confirm your action.
BIP..BIP
EN
14
33
/ DAILY CARE OF YOUR APPLIANCE
PROTECTING YOUR APPLIANCE
Avoid hard shocks from cookware:
The vitroceramic glass worktop is very sturdy;
however, it is not unbreakable.
Do not place any hot lids flat on your cooking
hob. A suction effect may damage the vitroce-
ramic surface.
Avoid dragging cookware across the surface,
which may in the long-term result in the
degradation of the decorative finish of the
vitroceramic top.
Avoid placing cookware on the frame or cover
(depending on the model).
Avoid using cookware with rough or bumpy
bottoms: they can capture and transfer parti-
cles that may produce stains or scratches on
your hob.
These defects that do not result in
appliance malfunction or do not make it
unsuitable for use are not covered by the
warranty.
MAINTAINING YOUR APPLIANCE
Do not store cleaning products or flammable
products in the cabinet underneath your coo-
king hob.
Do not heat unopened canned goods; they
may burst.
Of course, this precaution applies to all types
of cooking.
Never use a sheet of aluminium for cooking.
Never place items wrapped in aluminium foil
or packaged in aluminium dishes on your coo-
king hob.
The aluminium will melt and permanently
damage your cooking appliance.
Objects not intended for cooking should
never be placed on the hob (risk of powering
on, scratches, etc.).
Steam cleaning should never be used. The
steam jet could damage your hob.
TTYYPPEE OOFF SSTTAAIINNSS//SSPPOOTTSS
Light.
Accumulation of baked-
on soil.
Overflow of sugary pre-
parations, melted plastic.
Rings and hard water
residue.
Shiny metallic streaks.
Weekly maintenance.
WWHHAATT TTOO DDOO
Thoroughly moisten the zone to be clea-
ned with hot water, then wipe off.
Thoroughly moisten the zone to be clea-
ned with hot water. Use a scraper for
glass to remove the large bits, follow with
the rough side of a disinfectant sponge,
and then wipe off.
Apply warm white vinegar to the stain, let
stand, then wipe with a soft cloth.
Apply a cleaning agent for vitroceramic
glass (preferable one with silicone for its
protective properties) to the surface.
UUSSEE
Disinfectant spon-
ges.
Disinfectant spon-
ges.
Scraper for glass.
White spirit vinegar.
Cleaning agent for
vitroceramic glass.
Cream
Special disinfectant sponge
for delicate dishes
Scouring sponge
Powder
EN
15
44
/ SPECIAL MESSAGES, DIFFICULTIES
Warning
In the event that there is a break, crack or opening--even minor--in the vitroceramic
glass, immediately disconnect your appliance to avoid the risk of electric shock.
Contact the After-Sales Service Department.
YOU OBSERVE THAT: POSSIBLE CAUSES: WHAT SHOULD YOU DO:
An indicator light appears.
Your installation blows a fuse.
Only one side works.
The hob produces an odour
during the first cooking ses-
sions.
Working normally.
The electrical hook-up of your
hob is incorrect.
New appliance.
Nothing.
Verify the connections.
See the "Hook-Up" sec-
tion.
Operate each cooking
zone for 30 minutes with a
saucepan full of water.
The hob stops working and it
emits a beep approximately
every 10 seconds and a or
"F7" is displayed.
A series of small or "F7" is
displayed.
After turning on a heating zone,
the indicator lights on the
control panel continue to flash.
The saucepans make noise
during cooking.
Your hob makes a clicking
sound during cooking.
The fan continues to function a
few minutes after your hob is
turned off.
There was an overflow or an
object is in contact with the
control panel.
The electronic boards heated
up.
The cookware used is not sui-
table for induction or is less
than 12 cm in diameter (10 cm
for the 16-cm cooking zone).
This is normal with some types
of cookware. This is caused by
the transfer of energy from the
hob to the cookware.
Cooling of the electronic com-
ponents.
Working normally.
Clean the hob or remove
the object, then begin
cooking again.
See "Built-In" section.
See section on cookware
for induction.
Nothing. There is no risk,
neither to your hob nor to
your cookware.
Nothing.
During operation
During initial use
YOU OBSERVE THAT: POSSIBLE CAUSES: WHAT SHOULD YOU DO:
The hob is not working and the
indicator lights on the control
panel are not on.
The table is not working and
another message is displayed.
The hob does not function, the
information
is displayed.
The appliance is not receiving
electricity. The electrical sup-
ply is defective or the hook-up
is incorrect.
The electronic board is func-
tioning poorly.
The hob is locked.
Inspect the electrical cir-
cuit breaker and fuses.
Call the After-Sales
Service Department.
See chapter on using the
child safety system.
When powering on
YOU OBSERVE THAT: POSSIBLE CAUSES: WHAT SHOULD YOU DO:
EN
16
CZ5700586 /00 08/10
55
/ COOKING CHART
COOKING CHART
BROTHS
THICK SOUPS
COURT BOUILLON
FROZEN FOODS
THICK, FLOUR
-BASED
BUTTER-BASED WITH EGGS
(BEARNAISE, HOLLANDAISE)
PREPARED SAUCES
ENDIVES, SPINACH
DRIED BEANS
BOILED POTATOES
GOLDEN BROWN POTATOES
SAUTEED POTATOES
DEFROSTING VEGETABLES
MEAT, NOT TOO THICK
STEAKS, IN SKILLET
GRILLED MEATS (CAST IRON GRILL)
FROZEN FRENCH FRIES
FRESH FRENCH FRIES
PRESSURE COOKER
(ONCE IT STARTS WHISTLING)
COMPOTES
CRÊPES
CRÈME ANGLAISE
MELTED CHOCOLATE
JAMS
MILK
EGGS, FRIED
PASTA
JARS OF BABY FOOD
(DOUBLE BOILER)
MEAT STEW
SPANISH RICE
RICE PUDDING
FFRRYY CCOOOOKK//BBRROOWWNN CCOOOOKK//SSIIMMMMEERR KKEEEEPP
BRING TO RETURN TO BOILING
WWAARRMM
A BOIL BOILING LIGHT BROTHS
SOUPS
FISH
SAUCE
VEGETABLES
MEAT
FRYING
MISCELLA-
NEOUS
PP 99 88 77 66 55 44 33 22 11
PP 99 88 77 66 55 44 33 22 11
PP 99 88 77 66 55 44 33 2
2 11
FFaaggoorrBBrraannddtt SSAASS,, MMaannaaggeemmeenntt ccoommppaannyy SSAASS:: ssoocciiaall ccaappiittaall ooff 2200,,000000,,000000 eeuurrooss RRCCSS NNaanntteerrrree 444400 330033 119966..
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Brandt TI1016B Le manuel du propriétaire

Catégorie
Plaques de cuisson
Taper
Le manuel du propriétaire
Ce manuel convient également à

dans d''autres langues