Avanti WBC16Z1BIS Manuel utilisateur

Catégorie
Boissons glacées
Taper
Manuel utilisateur

Ce manuel convient également à

INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
Model Number / No. de Modelo / Modéle:
WBC16Z1B-IS
Wine and Beverage Chiller
Enfriador de Vinos / Bebidas
Refroidisseur de Vin / Breuvages
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
Avanti Products has a policy of continuous improvement on its products and reserves the right to change materials and
specifications without notice.
Avanti Products LLC
P.O. Box 520604 - Miami, Florida 33152
www.avantiproducts.com
2
TABLE OF CONTENTS
Appliance Safety
3
Important Safeguides
4
Help us Help You
5
Parts and Features
6
Important Safety Instructions
7
Installation Instructions
7
Electrical Connection / Extension Cord
8
Operating Your Appliance
9
Care and Maintenance
10
Troubleshooting Guide
11
Service for Your Appliance
12
Wiring Diagram
12
Your Avanti Products Warranty
13
Instrucciones en Español
14 21
Instructions en Français
22 - 32
Registration Form Last
Page
3
APPLIANCE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always
read and obey all safety messages.
This is the Safety Alert Symbol. This symbol alerts you to potential hazards that
can kill or injure you and others. All safety messages will follow the Safety
Alert Symbol and either the words “DANGER”, “WARNING” or “CAUTION”.
Danger means that failure to heed this
safety statement may result in severe
personal injury or death.
Warning means that failure to heed this
safety statement may result in extensive
product damage, serious personal injury, or
death.
Caution means that failure to heed this
safety statement may result in minor or
moderate personal injury, or property or
equipment damage.
All safety messages will alert you do what the potential hazard is, tell you how to reduce the chance of
injury, and let you know what can happen if the instructions are not followed.
PROP. 65 WARNING FOR CALIFORNIA RESIDENTS
WARNING:
Cancer And Reproductive Harm
www.p65warnings.ca.gov
REFRIGERANT GAS WARNINGS / AVERTISSEMENTS GAZ REFRIGERANT
DANGER - Risk of fire or explosion. Flammable refrigerant used.
DO NOT use mechanical devices to defrost wine chiller. DO NOT puncture refrigerant tubing.
DANGER - Risk of fire or explosion. Flammable refrigerant used.
To be repaired only by trained service personnel. DO NOT puncture refrigerant tubing.
CAUTION - Risk of fire or explosion. Flammable refrigerant used.
Consult repair manual / owner’s guide before attempting to service
this product. All safety precautions must be followed.
CAUTION - Risk of fire or explosion. Dispose of property in accordance
with federal or local regulations. Flammable refrigerant used.
CAUTION - Risk of fire or explosion due to puncture of refrigerant tubing;
Follow handling instructions carefully. Flammable refrigerant used.
CAUTION-To Prevent A Child From Being Entrapped, Keep Out Of Reach Of Children And Not
In The Vicinity Of Wine Chiller.
CAUTION-Risk of Fire
4
IMPORTANT SAFEGUARDS
Before the appliance is used, it must be properly positioned and installed as
described in this manual, so read the manual carefully. To reduce the risk of
fire, electrical shock or injury when using the appliance, follow basic
precautions, including the following:
Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do
not use an extension cord
Remove all films before operating
• It is recommended that a separate circuit, serving only your appliance, be provided. Use receptacles
that cannot be turned off by a switch or pull chain
• Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or
explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of
this or any other appliance. The fumes can create a fire hazard or explosion.
• Before proceeding with cleaning and maintenance operations, make sure the power line of the unit
is disconnected.
• Do not connect or disconnect the electric plug when your hands are wet
• Unplug the appliance or disconnect the power before cleaning or servicing. Failure to do so can
result in electrical shock or death.
• Do not attempt to repair or replace any part of your appliance unless it is specifically recommended
in this material. All other servicing should be referred to a qualified technician.
• Use two or more people to move and install the appliance. Failure to do so can result in back or
other injury.
• To ensure proper ventilation for your appliance, the unit must be completely unobstructed. Choose a
well-ventilated area with temperatures above 55
0
F (13
0
C) and below 90
0
F (32
0
C). This unit must
be installed in an area protected from the elements, such as wind, rain, water spray or sunlight.
• The appliance should not be located next to ovens, grills or other sources of high heat.
• The appliance must be installed with all electrical, water and drain connections in accordance with
state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in
accordance with the National Electrical Code and local codes and ordinances is required.
• Do not kink or pinch the power supply cord of the appliance.
• The fuse (or circuit breaker) size should be 15 amperes.
• It is important for the appliance to be leveled in order to work properly. You may need to make
several adjustments to level it.
• All installation must be in accordance with local plumbing code requirements.
• Make certain that the pipes are not pinched or kinked or damaged during installation.
• Check for leaks after connection.
• Never allow children to operate, play with or crawl inside the appliance
• Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage
or discolor the interior.
• Do not use this apparatus for other than its intended purpose.
5
HELP US HELP YOU...
Read this guide carefully.
It is intended to help you operate and maintain
your new unit properly.
Keep it handy to answer your questions.
If you don't understand something or you
need more assistance, please call:
Avanti Customer Service
800-220-5570
Keep proof of original purchase date (such as
your sales slip) with this guide to establish the
warranty period.
CAUTION:
THESE UNITS ARE NOT
DESIGNED FOR THE STORAGE
OF MEDICINE OR OTHER
MEDICAL PRODUCTS.
Write down the model and serial numbers.
You'll find them on a plate located on the rear
outside wall of unit.
Please write these numbers here:
_
Date of Purchase
_
Model Number
_
Serial Number
Use these numbers in any correspondence or
service calls concerning your unit.
If you received a damaged unit, immediately
contact the dealer (or builder) that sold you the
unit.
Save time and money. Before you call for
service, check the Troubleshooting Guide. It
lists causes of minor operating problems that
you can correct yourself.
IF YOU NEED SERVICE
We're proud of our service and want you to be
pleased. If for some reason you are not happy
with the service you receive, here are some
steps to follow for further assistance.
FIRST, contact the people who serviced your
unit. Explain why you are not pleased. In most
cases, this will solve the problem.
NEXT, if you are still not pleased, write all the
details, including your telephone number, and
send it to:
Customer Service
Avanti Products
10880 NW 30 Street
Miami, FL 33172 USA
6
PARTS & FEATURES
1
Upper Hinge
2
Control Panel Front of Door
3
Door
4
Lower Hinge
5
Leveling Leg
6
Shelves
12 Bottle Loading
15 Bottle Loading
Beverage Cooler
Loading
7
IMPORTANT SAFETY INSTRUCTIONS
~WARNING~
To reduce the risk of fire, electrical shock,
or injury when using your appliance, follow
these basic precautions:
Read all instructions before using the appliance.
DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned
appliances are still dangerous . . . even if they will “just sit in the garage a few days”.
Before you throw away your old appliance: Take off the door. Leave the shelves
in place so that children may not easily climb inside.
Never allow children to operate, play with, or crawl inside the appliance.
Never clean appliance parts with flammable fluids. The fumes can create a fire
hazard or explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity
of this or any other appliance. The fumes can create a fire hazard or explosion.
-Save these instructions-
INSTALLATION INSTRUCTIONS
Ø
BEFORE USING YOUR APPLIANCE
Remove the exterior and interior packing.
Check to be sure you have all of the following parts:
1
Instruction Manual
1
Wire Wine Bottle Shelf
1
Wire Shelf (Full Shelf)
1 Wire Shelf (Half Shelf)
1 Bottle Stacking Assembly
Before connecting this appliance to the power source, let it stand upright for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Ø
INSTALLATION OF YOUR APPLIANCE
THIS APPLIANCE IS DESIGNED TO BE FOR FREE STANDING INSTALLATION ONLY.
ALLOW 4” INCHES OF SPACE BETWEEN THE TOP AND SIDES OF THE UNIT AND A
MINIMUM OF 4” INCHES AT THE REAR, WHICH ALLOWS THE PROPER AIR
CIRCULATION TO COOL THE COMPRESSOR.
Place your appliance on a floor that is strong enough to support it when it is fully loaded. To
level your appliance, adjust the front leveling legs at the bottom of the appliance.
Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator,
etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold ambient temperatures may also cause the unit not to perform
properly.
Avoid locating the unit in moist areas.
Plug the appliance into an exclusive, properly installed-grounded wall outlet. Do not under
any circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician or an
authorized Avanti Products service center.
8
Ø ELECTRICAL CONNECTION
This appliance should be properly grounded for your safety. The power cord of this appliance is
equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the
possibility of electrical shock.
Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For
personal safety, this appliance must be properly grounded.
This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong. Have
the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.
When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet.
The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental
injury.
The appliance should always be plugged into its own individual electrical outlet which has a voltage rating
that matches the rating label on the appliance. This provides the best performance and also prevent
overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the
appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle.
Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use
a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance,
be careful not to damage the power cord.
Ø EXTENSION CORD
Because of potential safety hazards under certain conditions, it is strongly recommended that you do not
use an extension cord with this appliance. However, if you must use an extension cord it is absolutely
necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding
type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.
Ø SURGE PROTECTOR
Most electrical appliances use a series of electric control boards to operate. These boards are very
susceptible to power surges and could be damaged or destroyed.
If the appliance is going to be used in an area or if your city / country is prone to power surges / outages;
it is suggested that you use a power surge protector for all electrical devices / appliances you use. The
surge protector that you select must have a surge block high enough to protect the appliance it is
connected to. If you have any questions regarding the type and size of surge protector needed contact a
licensed electrician in your area.
Damages due to power surges are not considered a manufacturer covered defect and will void your
product warranty.
~
Warning
~
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by an authorized Avanti Products service center.
9
OPERATING YOUR APPLIANCE
It is recommended you install the appliance in a place where the ambient temperature is between 72-
78
degrees Fahrenheit. If the ambient temperature is above or below recommended temperatures,
the
performance of the unit may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate. The average temperature range of 37-65 degrees
Fahrenheit may
not be reached.
Temperature Range
37º - 65º F
- 18º C
Recommended Temperatures for Chilling Wine.
Red Wines
58 - 65 ºF
15 - 18 ºC
Dry / White Wines
48 - 57 ºF
10 - 14 ºC
Rose Wines
49 - 51 ºF
9 – 11 ºC
Sparkling Wines
40 - 47 ºF
5 - 8 ºC
ON/OFF POWER
- Press and hold for 3 seconds on control panel to turn on or turn off the cooler, when cooler is
turned off, the appliance will stop working.
Ø CONTROL PANEL LOCK
Your appliance is equipped with a control panel lock feature which will lock itself automatically 12 seconds
after the last time a button is pressed.
Press the POWER button for approximately 3 seconds to unlock the control panel. You will hear a “BEEP”
sound to alert you that the control is now active.
Ø TEMPERATURE DISPLAY ( ºF / ºC )
With the control panel unlocked and active, simply press and hold the POWER and SETTING buttons for
approximately 2 seconds, the ºC or ºF indicator light will turn on and the temperature setting in the digital
display will change.
Ø SETTING THE TEMPERATURE CONTROL
With the control panel unlocked and active, simply press the SETTING button, the temperature will increase
in increments of 1ºF / 1ºC with each press. To scroll rapidly through the temperature settings simply press
and hold the SETTING button and the temperature selections will change quicker.
The control panel is equipped with a “Memory Setting”, if the unit accidentally powered off, the unit will return
to the original setting when the power is turned back on.
Wine & Beverage Chiller Control Panel
10
CARE AND MAINTENANCE
Ø
CLEANING YOUR APPLIANCE
Turn off the power, unplug the appliance, and remove all items including shelves.
Wash the inside surfaces with a warm water and baking soda solution. The solution should be
about 2 tablespoons of baking soda to a quart of water.
Wash the shelves with a mild detergent solution.
Wring excess water out of the sponge or cloth when cleaning area of the controls, or any
electrical parts.
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with
a clean soft cloth.
Do not use steel wool or steel brush on the stainless steel. These will contaminate the stainless
steel with steel particles and rusting may occur.
Ø
POWER FAILURE
Most power failures are corrected within a few hours and should not affect the temperature of
your appliance if you minimize the number of times the door is opened. If the power is going to be
off for a longer period of time, you need to take the proper steps to protect your contents.
Ø
MOVING YOUR APPLIANCE
Remove all items.
Securely tape down all loose items (shelves) inside your appliance.
Tape the door shut.
Be sure the appliance stays secure in the upright position during transportation. Also protect
outside of appliance with a blanket, or similar item.
Ø
ENERGY SAVING TIPS
The appliance should be located in the coolest area of the room, away from heat producing
appliances, and out of the direct sunlight.
Ø
HIGH AND LOW TEMPERATURE PROTECTION SYSTEMS
This appliance is equipped with a HIGH and LOW temperature protection system:
HIGH Temperature:
Display Code: HH
After the first hour of use, if the system detects temperatures above 78ºF continuously for
approximately 20 minutes, the system will activate the protection system, display HH in the display
window and a buzzing noise will be heard for 20 minutes. The system will run the compressor for
5 minutes and shut off for 10 minutes to stabilize the temperature. Once the system returns to
normal temperature (below 78ºF), the HH display and buzzer will turn off.
LOW Temperature:
Display Code: LL
After the first hour of use, if the system detects temperatures below 5ºF continuously for
approximately 20 minutes, the system will activate the protection system, display LL in the display
window and a buzzing noise will be heard for 20 minutes. The system will shutdown the
compressor until the interior temperature reaches a minimum of 36ºF, once the minimum
temperature has been reached the LL display and buzzer will turn off.
11
PROBLEMS WITH YOUR APPLIANCE?
You can solve many common problems easily, saving you the cost of a possible service call. Try the
suggestions below to see if you can solve the problem before calling the servicer.
TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE CAUSE
Appliance does not operate.
Not plugged in.
The appliance is turned off.
The circuit breaker tripped or a blown fuse.
Appliance is not cold enough.
Check the temperature control setting.
External environment may require a higher
setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
Turns on and off frequently.
The room temperature is hotter than normal.
A large amount of contents has been added to
the unit.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
Vibrations.
Check to assure that the appliance is level.
The appliance seems to make too much noise.
The rattling noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling
sounds caused by the flow of refrigerant in your
appliance.
Contraction and expansion of the inside walls
may cause popping and crackling noises.
The appliance is not level.
The door will not close properly.
The appliance is not level.
The gasket is dirty.
The shelves are out of position.
Display flashes Error message “HH”
High Temperature Protection
Sensor Short Circuit
See Page 10 for description
Contact the Avanti Service Department
1 - 800 – 220 - 5570
Display flashes Error message LL
Low Temperature Protection Open Circuit
See Page 10 for description
Contact the Avanti Service Department
1 - 800 – 220 – 5570
Display flashes Error message E9
Communication Failure to Power and
Control PCB Boards
Contact the Avanti Service Department
1 - 800 – 220 - 5570
12
SERVICE FOR YOUR APPLIANCE
We are proud of our customer service organization and the network of professional service
technicians that provide service on your Avanti appliances. With the purchase of your Avanti
appliance,
you can have the confidence that if you ever need additional information or assistance, the
Avanti
Products Customer Service team will be here for you. Just call us toll-free.
AVANTI PRODUCTS CUSTOMER SERVICES
Product Information
800-323-5029
Whatever your questions are about our products,
help is available.
Part Orders
800-220-5570
You may order parts and accessories that will be
delivered directly to your home by personal
check, money order, Master Card, or Visa.
In-Home Repair Service
800-220-
5570
An Avanti Products authorized service center will
provide expert repair service, scheduled at a time
that is convenient for you. Our trained servicers
know your appliance inside and out.
WIRING DIAGRAM
13
YOUR AVANTI PRODUCTS
WARRANTY
Staple your sales receipt here. Proof of original
purchase date is needed to obtain service under
warranty.
WHAT IS COVERED LIMITED ONE-YEAR W ARRANTY
Avanti Products warrants that the product is free from defects in materials and/or workmanship for a period of
twelve (12) months from the date of purchase by the original owner. The foregoing timeline begins to run upon
the date of purchase, and shall not be stalled, tolled, extended, or suspended for any reason whatsoever unless
described in detail in the warranty document. For one year from the date of purchase by the original owner,
Avanti products will, at its option, repair or replace any part of the product which proves to be defective in
material or workmanship under normal use. Avanti Products will prov
ide you with a reasonably similar product
that is either new or factory refurbished. During this period Avanti Products will provide all parts and labor
necessary to correct such defects free of charge, so long as the product has been installed and operated in
accordance with the written instructions in this manual. In rental or commercial use, the warranty period is 90
days. All Avanti appliances of 4.2 cubic feet capacity or less must be brought/sent to the appliance service
center for repair.
LIMITED SECOND THROUGH FIFTH YEAR W ARRANTY
For the second through the fifth year from the date of original purchase, Avanti Products will provide a
replacement compressor free of charge due to a failure. You are responsible for the service labor and freight
charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Costs
involved to move the product to the service center and back to the user’s home, as maybe required, are the
user’s responsibility.
WARRANTY EXCLUSIONS / WHAT IS NOT COVERED:
The warranty coverage described herein excludes all defects or damage that are not the direct fault of Avanti
Products, including without limitation, one or more of the following:
A failure to comply with any applicable state, local, city, or county electrical, plumbing and/or building codes,
regulations, or laws, including failure to install the product in strict conformity with local fire and building codes
and regulations.
Any external, elemental and/or environmental forces and factors, including without limitation, rain, wind, sand,
floods, fires, mud slides, freezing temperatures, excessive moisture or extended exposure to humidity,
lightning, power surges, structural failures surrounding the appliance, and acts of God.
The warranty does not apply outside the
Continental USA.
Content losses of food or other content due to
spoilage.
Incidental or consequential damages
Parts and labor costs for the following will not be
considered as warranty:
Evaporator doors, door springs, and/or frames.
Inner door panels, door shelves, door rails,
and/or door supports.
Light bulbs and/or plastic housing.
Plastic cabinet liners.
Punctured evaporator that voids the warranty on
the complete sealed system.
Shipping and handling costs associated with the
replacement of the unit.
Repairs performed by unauthorized servicers.
Service calls that are related to external problems,
such as abuse, misuse, inadequate electrical
power, accidents, fire, floods, or any other acts of
God.
Failure of the product if it is used for other than it
intended purpose.
Surcharges including but not limited to, any after
hour, weekend, or holiday service calls, tolls, ferry
trip charges, or mileage expense for service calls to
remote areas.
In no event shall Avanti Products have any liability or responsibility whatsoever for damage to surrounding
property, including cabinetry, floors, ceilings, and other structures and/or objects around the product. Also
excluded from this warranty are scratches, nicks, minor dents, and other cosmetic damages on external surfaces
and exposed parts; Products on which the serial numbers have been altered, defaced or removed; service visits
for customer education, or visits where there is nothing wrong with the product; correction of installation problems
(you are solely responsible for any structure and setting for the product, including all electrical, plumbing and/or
other connecting facilities, for
proper foundation/flooring, and for any alterations including without limitation
cabinetry, walls, floors, shelving etc., as well as the resetting of breakers or fuses.
OUT OF WARRANTY PRODUCT
Avanti Products is under no obligation, at law or otherwise, to provide you with any concessions, including
repairs, pro-rates, or product replacement, once this warranty has expired.
WARRANTY – REFRIGERATION - COMPRESSOR
14
MEDIDAS DE SEGURIDAD IMPORTANTES
Antes de enfriador de bebidas se utiliza, debe ser colocado correctamente e
instalado como descrito en este manual, así que lea cuidadosamente el
manual. Para reducir el riesgo de incendio, descarga eléctrica o lesiones al
utilizar el enfriador de bebidas, Siga las precauciones básicas, incluyendo las
siguientes
•Enchufe en unas 3 clavijas con conexión a tierra toma de corriente, hacer No retire de puesta a
tierra púa, hacer No utilice un adaptador, y no utilice un cable de extensión
• Reemplazar todos los paneles antes operativos
• Eso se recomienda usar un circuito separado, que sólo sirve a su enfriador de bebidas, ser
proporcionado. Use recipientes ese no poder ser desactivado por un interruptor o cadena
• Nunca limpia electrodoméstico piezas con líquidos inflamables. Estos vapores pueden crear un
riesgo de incendio o explosión. Y no almacene ni use gasolina u otros vapores y líquidos
inflamables en la proximidad de este o cualquier otro electrodoméstico. Los vapores pueden crear
un riesgo de incendio o explosión.
• Antes de proceder con las operaciones de limpieza y mantenimiento, asegúrese de que la línea de
alimentación de la unidad se desconecta.
• hacer No conecte o desconecte el enchufe eléctrico con las manos mojadas
• Desenchufe el electrodoméstico o desconectar la alimentación antes de la limpieza o el
mantenimiento. El no hacerlo puede provocar una descarga eléctrica o la muerte.
• hacer No intente reparar o reemplazar cualquier parte de su electrodoméstico a menos que se
recomiende específicamente en este material. Cualquier otro servicio debe ser realizado por un
técnico cualificado.
• Se recomienda utilizar dos o más personas para mover e instalar el electrodoméstico. El aparato es
pesado y puede resultar en daños de la espalda u otras lesiones.
• Para garantizar una ventilación adecuada para su electrodoméstico, la unidad debe estar
completamente despejada. Elija un área bien ventilada con temperaturas superiores a 55ºF (13ºC)
y por debajo de 90ºF (32ºC). Esta unidad debe ser instalada en un área protegida de los
elementos, tales como el viento, la lluvia, rocío de agua o luz de sol.
• El electrodoméstico no debe colocarse cerca de hornos, parrillas u otras fuentes de calor.
• El electrodoméstico debe ser instalado con todas las conexiones eléctricas, de agua y de desagüe
según los códigos estatales y locales. Hace falta un suministro eléctrico estándar (sólo 115 V CA,
60 Hz), debidamente conectada a tierra de acuerdo con el Código Eléctrico Nacional y los códigos
y ordenanzas locales.
• Hacer No doble ni apriete el cable de alimentación del electrodoméstico.
• Los fusibles (o disyuntor) tamaño debe ser de 15 amperios.
• Eso Es importante que el electrodoméstico a nivelarse con el fin de funcionar correctamente.
Puede que tenga que hacer varios ajustes para nivelarla.
• Toda la instalación debe realizarse de acuerdo con los requerimientos locales de plomería.
• Asegúrese de que los tubos no están aplastar ni dañado durante instalación.
• Compruebe si hay fugas después de la conexión.
• Nunca permita que los niños operen, jueguen o gatear el interior del electrodoméstico
Hacer No utilice productos de limpieza a base de disolvente-abrasivos en el interior. Estos
limpiadores pueden dañar o decolorar el interior.
• No utilice este electrodoméstico para que no sea su finalidad.
15
Ayúdenos a ayudarte...
Lea detenidamente esta guía.
Se pretende que ayudan a utilizar y mantener
su nuevo electrodoméstico correctamente.
Mantenga a la mano para responder a sus
preguntas.
Si no entiende algo o si necesita más ayuda,
por favor llame a:
Avanti Servicio al Cliente
800-220-5570
Mantenga prueba de la fecha original de
compra (como el recibo de venta) con esta
guía para establecer el período de garantía.
Escribir se establece el modelo y número de
serie.
Los encontrará en una placa situada en la pared
exterior trasera del electrodoméstico.
Por favor, escriba estos números aquí:
_________________________________
Fecha de compra
_________________________________
Número de modelo
_________________________________
Número de serie
Utilice estos números en cualquier
correspondencia o llamadas de servicio con
respecto a su electrodoméstico.
Si ha recibido un electrodoméstico dañado,
póngase inmediatamente en contacto con el
distribuidor (o constructor) que le vendió el
electrodoméstico.
Ahorrar tiempo y dinero. Antes de llamar al
servicio técnico, consulte la Guía de solución de
problemas. En él se enumeran las causas de los
problemas de funcionamiento de menor
importancia que se pueden corregir a sí mismo.
Si necesita servicio
Estamos orgullosos de nuestro servicio y
queremos que usted esté satisfecho. Si por
alguna razón usted no está satisfecho con el
servicio que recibe, aquí hay algunos pasos a
seguir para obtener más ayuda.
PRIMERA, póngase en contacto con las
personas que servicio de reparación del
electrodoméstico. Explicar por qué usted no
está satisfecho. En la mayoría de los casos,
esto va a resolver el problema.
A continuación, si usted todavía no está contento,
escribir todos los detalles, incluyendo su número
de teléfono, y enviarlo a:
Servicio al cliente
Avanti Products
10880 NW 30 Street
Miami, FL 33172 EE.UU.
PRECAUCIÓN:
ESTE ELECTRODOMÉSTICO NO
ESTÁ DISEÑADO PARA EL
ALMACENAMIENTO DE
MEDICINA U OTROS
PRODUCTOS MÉDICOS.
16
PARTES Y CARACTERÍSTICAS
1
Bisagra superior
2
Panel de control parte delantera de la puerta
3
Puerta
4
Bisagra inferior
5
Pata niveladora
6
Estantería
12 Botellas
15 Botellas
Enfriador de Bebidas
17
INSTRUCCIONES DE INSTALACIÓN
Ø
ANTES DE UTILIZACIÓN DEL APARATO
Retire la envoltura interna y externa.
Compruebe para asegurarse de que tiene todas las siguientes partes:
1
Manual de instrucciones
1
Repisas de alambre para vinos
1
Repisa grande de alambre
1
Repisa pequeña de alambre
1
Estante para botellas
Ante de conectar el aparato a la fuente de alimentación, se deja reposar en posición vertical
durante aproximadamente 2 horas. Esto reducirá la posibilidad de un mal funcionamiento en
el sistema de refrigeración de la manipulación durante el transporte.
Limpiar la superficie interior con agua tibia con un paño suave.
Ø
INSTALACIÓN DEL APARATO
El aparato está diseñado para ser para la instalación de pie SOLAMENTE.
Coloque el aparato sobre un piso que sea lo suficientemente fuerte como para soportar su
peso cuando está totalmente cargado. Para nivelar el aparato, ajuste las patas niveladoras
delanteras en la parte inferior del aparato.
Coloque el aparato lejos de luz solar directa y de fuentes de calor (cocina, calefacción,
radiador, etc.). La luz solar directa puede afectar el recubrimiento acrílico y fuentes de calor
puede aumentar el consumo eléctrico. Temperaturas ambiente extremas de frío también
pueden hacer que la unidad no funcione correctamente.
Evite colocar la unidad en áreas húmedas.
Conecte el aparato a una toma de pared exclusivo, tierra adecuada-instalado. Bajo ninguna
circunstancia corte o retire la tercera pata (tierra) del cable de alimentación. Cualquier
pregunta relacionada con la energía y / o puesta a tierra deben ser dirigidas a un electricista
certificado o un centro de servicio de Avanti Products.
18
Conexión eléctrica
~Advertencia~
El uso inapropiado del enchufe a tierra puede resultar en el riesgo de descarga eléctrica. Si el cable
de alimentación está dañado, haga que sea reemplazado por un centro de servicio autorizado de
Avanti Products.
Este electrodoméstico debe estar conectado a tierra adecuadamente para su seguridad. El cable
eléctrico de este electrodoméstico está equipado con un enchufe de tres puntas que encajan con tres
enchufes de pared standard para reducir al mínimo la posibilidad de una descarga eléctrica.
Bajo ninguna circunstancia corte o remueva la punta de tierra del cable de alimentación suministrado.
Este electrodoméstico requiere una toma de corriente eléctrica 115Volts ~ / 60 Hz estándar con tierra
de tres clavijas.
El cable debe ser asegurado detrás del electrodoméstico y no déjelo expuesto para evitar lesiones
accidentales.
Nunca desenchufe el electrodoméstico tirando del cable de alimentación. Siempre sostenga
firmemente el enchufe y tire en línea recta desde el receptáculo.
No utilice un cable de extensión con este electrodoméstico. Si el cable de alimentación es demasiado
corto, haga que un electricista o técnico calificado instale un tomacorriente cerca del electrodoméstico.
Ø CABLE EXTENSIÓN
Debido a los peligros potenciales de seguridad bajo ciertas condiciones, se recomienda
encarecidamente que no se utilice un cable de extensión con esta unidad. Sin embargo, si debe
utilizar un cable de extensión es absolutamente necesario que se trate de un UL / CUL, 3 hilos con
toma de tierra del electrodoméstico cable de extensión que tiene un enchufe y la toma a tierra y que
la clasificación eléctrica del cable sea de 115 voltios y al menos 10 amperios.
Ø PROTECTOR CONTRA SOBRETENSIONES
La mayoría de los electrodomésticos utilizan una serie de paneles de control eléctricos para operar.
Estas placas son muy susceptibles a las subidas de tensión y podrían ser dañados o destruidos.
Si el electrodoméstico va a ser usado en un área o si su ciudad / país es propenso a subidas de
tensión / interrupciones; se sugiere que utilice un protector contra sobretensiones alimentación de
todos los dispositivos / electrodomésticos que utiliza. El estabilizador de tensión que se selecciona
debe tener un bloque oleada suficientemente alto como para proteger el electrodoméstico es
conectado a. Si usted tiene alguna pregunta relacionada con el tipo y tamaño de contacto necesario
protector contra sobretensiones a un electricista autorizado en su área.
Los daños debidos a sobrecargas de energía no se consideran un defecto cubierto por el fabricante y
anulará la garantía del producto.
19
FUNCIONAMIENTO DEL APARATO
Se recomienda instalar el aparato en un lugar donde la temperatura ambiente es de entre 72- 78
grados Fahrenheit. Si la temperatura ambiente es la temperatura recomendada por encima o por
debajo, el rendimiento de la unidad puede verse afectado. Por ejemplo, la colocación de la unidad en
condiciones frías o calientes extremas puede causar temperaturas interiores que fluctúan y no se
pudiera alcanzar el rango de 40-65 grados Fahrenheit.
Rangos de Temperatura
37º- 65º F
3º- 18º C
Las temperaturas recomendadas para el vino enfriándose.
Vinos tintos
58- 65 ºF
15- 18 ºC
Vinos blancos
48- 57 ºF
10 - 14 ºC
Vinos rosados
49- 51 ºF
9-11 ºC
Vinos espumantes
40 - 47 ºF
5- 8 ºC
ON / APAGADO
- Pulse y mantenga pulsado durante 3 segundos en el panel de control para encender o apagar
el refrigerador, cuando más frío está apagado, el aparato dejará de funcionar.
Ø BLOQUEO DEL PANEL DE CONTROL
Este aparato está equipado con una función de bloqueo del panel de control que se bloquee
automáticamente 12 segundos después de la última pulsación de un botón.
Presione el botón de Encendido durante aproximadamente 3 segundos para desbloquear el panel de
control. Se escuchará un sonido “BEEP” para avisarle de que el control está activo.
Ø TEMPERATURA DISPLAY (ºF / ºC)
Con el panel de control desbloquea y activa, simplemente pulse y mantenga presionado el botón de
Encendido aproximadamente 2 segundos, la luz indicadora ºC o ºF se encenderá y el ajuste de
temperatura en la pantalla digital va a cambiar.
Ø AJUSTE DEL CONTROL DE TEMPERATURA
Con el panel de control desbloqueado y activo, sólo tiene que pulsar el botón de ajuste, la temperatura
aumentará en incrementos de 1 ° F / 1ºC con cada pulsación. Para desplazarse rápidamente a través de
los ajustes de temperatura simplemente pulse y mantenga pulsado el botón AJUSTE y las selecciones
de temperatura cambiarán más rápido.
El panel de control está equipado con un “Memory Setting”, (ajuste programado) si la unidad encendida
accidentalmente, la unidad volverá a la configuración original cuando el poder se vuelve a encender.
Control de temperatura
20
CUIDADO Y MANTENIMIENTO
Ø
LIMPIEZA DEL APARATO
desenchufe el aparato y retire todos los artículos incluyendo los estantes.
Limpia las superficies interiores con una solución de agua y bicarbonato de sodio caliente.
La solución debe ser de aproximadamente 2 cucharadas de bicarbonato de sodio a un litro
de agua.
Limpia los estantes con una solución de detergente suave.
Esprima exceso de agua de la esponja o paño para limpiar el área de los controles, o
cualquier partes eléctricas.
Limpia el armario exterior con agua caliente y detergente líquido suave. Enjuague bien y
seque con un paño suave y limpio.
No utilice lana de acero o un cepillo de acero sobre el acero inoxidable. Estos
contaminarán el acero inoxidable con partículas de acero y se puede producir la oxidación.
Ø
FALLAS DE ELECTRICIDAD
Las fallas de energía t se corrigen en unas pocas horas y no deben afectar a la temperatura
de su electrodoméstico si se minimiza el número de veces que se abre la puerta. Si el poder
va a estar fuera por un período de tiempo más largo, es necesario tomar las medidas
adecuadas para proteger sus contenidos.
Ø
SI UD SE MUDA
Eliminar todos las botellas.
Segure con cinta adhesiva todos los artículos sueltos (estantes) en el interior de su aparato.
Cierre la puerta y segure con cinta adhesiva
Mantiene de que el aparato este seguro en la posición vertical durante el transporte.
También proteja el exterior del aparato con una manta, o un elemento similar.
Ø
CONSEJOS PARA AHORRAR ENERGÍA
El aparato debe estar situado en la zona más fría de la habitación, lejos de aparatos que
producen calor, y fuera de la luz directa del sol.
SISTEMAS DE PROTECCIÓN DE ALTA Y BAJA TEMPERATURA
• Este aparato está equipado con un sistema de protección de temperatura ALTA y BAJA:
Alta temperatura:
Código de pantalla: HH
Después de la primera hora de uso, si el sistema detecta temperaturas superiores a 78ºF
continuamente durante aproximadamente 20 minutos, el sistema activará el sistema de protección,
mostrará HH en la ventana de visualización y se escuchará un zumbido durante 20 minutos. El
sistema hará funcionar el compresor durante 5 minutos y se apagará durante 10 minutos para
estabilizar la temperatura. Una vez que el sistema vuelve a la temperatura normal (por debajo de
78ºF), la pantalla HH y el zumbador se apagarán.
Baja temperatura:
Código de pantalla: LL
Después de la primera hora de uso, si el sistema detecta temperaturas por debajo de 5ºF de forma
continua durante aproximadamente 20 minutos, el sistema activará el sistema de protección,
mostrará LL en la ventana de visualización y se escuchará un zumbido durante 20 minutos. El
sistema apagará el compresor hasta que la temperatura interior alcance un mínimo de 36ºF, una vez
que se haya alcanzado la temperatura mínima, la pantalla LL y el zumbador se apagarán.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Avanti WBC16Z1BIS Manuel utilisateur

Catégorie
Boissons glacées
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues