T-Fal Eco Master Iron FV1732 Manuel utilisateur

EN

FR

ES

Ecomaster

www.t-fal.cawww.t-fal.com www.t-fal.mx

EN For further usage information /

FR Pour plus d’informations sur l’utilisation /

ES Para obtener más información sobre su uso :

INSTRUCTIVO DE OPERACION

Le invitamos a leer cuidadosamente este instructivo antes de usar su aparato, en el encontrarà sus caracteristicas e

instrucciones para el mejor aprovechamiento del mismo. Verifique que el voltaje de su instalacion sea igual al de su

aparato el cual se indica en este instructivo.

Plancha de vapor

Modelo.FV17xx

Caracteristicas eléctricas:

120 V~ 60 Hz 1400 W

120 V~ 60 Hz 1200 W

*selon modèle/Depending on model/

Según modelo

FR Selon modèle EN Depending on model ES Según modelo

*

boost

safety

auto-o

1

Important safety recommendations ....................................................... p. 2

Before first use .................................................................................................. p. 5

Which water should I use? ............................................................................ p. 5

Filling the water tank ...................................................................................... p. 6

Adjusting the temperature and steam .................................................... p. 7

Dry ironing .......................................................................................................... p. 8

Getting more steam ........................................................................................ p. 8

Vertical steam ironing .................................................................................... p. 9

Dampening clothing (Spray) ..................................................................... p. 10

While ironing ................................................................................................... p. 10

Auto-off Function (according to model) ............................................... p. 10

Iron storage ...................................................................................................... p. 11

Cleaning the anti-limescale collector (once per month) ................ p. 11

Descaling the steam chamber (once per month) ............................. p. 13

Cleaning the soleplate .................................................................................. p.14

Problems, possible causes, solutions ................................................ p. 15-16

PREPARATION

USE

IRON STORAGE AND MAINTANANCE

IS THERE A PROBLEM WITH YOUR IRON?

IMPORTANT SAFETY RECOMMENDATIONS

SUMMARY

EN

2

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using the iron.

When using your iron, basic safety precautions should always be followed, including the

following:

1. Use iron only for its intended use.

2. To protect against a risk of electric shock, do not immerse the iron in water or other

liquids.

3. Always turn the iron OFF before plugging or unplugging the iron from the electrical

outlet. Never pull on the cord to disconnect the iron from the electrical outlet; instead,

grasp the plug and pull on the plug to disconnect the iron.

4. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away.

Loop cord loosely around iron when storing.

5. Always disconnect iron from electrical outlet when ﬁlling with water or emptying and

when not in use.

6. Do not operate iron with a damaged cord or if the iron has been dropped or damaged.

To avoid the risk of electric shock, do not disassemble the iron. Contact our Consumer

Service Department for examination, repair or adjustment. Incorrect reassembly can

cause a risk of electric shock when the iron is used.

7. Close supervision is necessary for any appliance being used by or near children. Do not

leave iron unattended while connected or on an ironing board.

8. Burns can occur from touching hot metal parts, hot water or steam. Use caution when

you turn a steam iron upside down - there may be hot water in the reservoir.

9. This appliance is only for domestic and personal use.

SPECIAL INSTRUCTIONS

1. To avoid a circuit overload, do not operate another high-wattage appliance on the

same circuit.

2. If an extension cord is absolutely necessary, a 15 amp. cord should be used. Cords rated

for less amper may overheat. Care should be taken to arrange the cord so that it cannot

be pulled or tripped over.

SAVE THESE INSTRUCTIONS

For your safety

PLEASE READ THESE INSTRUCTIONS CAREFULLY

AND KEEP THEM FOR FUTURE REFERENCE.

This appliance complies with the technical rules and standards for safety currently in force

(Electromagnetic Compatibility, Low Voltage, Environnement).

• This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a

person responsible for their safety. Children must be supervised to ensure that they do

not play with the appliance.

• During the first few uses, a harmless odor and a small amount of smoke may be

given off. This has no effect on the use of the iron and will disappear quickly.

3

• Warning ! The voltage of your electrical installation must correspond to that of

the iron (120V or 127 V). Connecting to the wrong voltage may cause irreversible

damage to the iron and will terminate the guarantee.

• If it is absolutely essential to use an extension cable, choose a 15 amp cord.

• If the electrical cord becomes damaged, it must be immediately replaced by an

Approved Service Centre to avoid any danger.

• The appliance should not be used if it has fallen, if it has obvious damage, if it leaks or

functions incorrectly. Never dismantle your appliance : have it inspected by an Approved

Service Centre, to avoid any danger.

• Never immerse your iron in water!

• Do not unplug your appliance by pulling on the cord. Always unplug your appliance:

before ﬁlling or rinsing the water tank, before cleaning it, after each use.

• Never leave the appliance unattended when it is connected to the mains. Before storing

the appliance, once it is unplugged, please wait until it has cooled down (around 1

hour).

• Your appliance gives off steam, which may cause burns. Take extra care especially when

you are ironing close to the edge or on a corner of your ironing board. Never direct the

steam towards people or animals.

• Your iron should be used and placed on a ﬂat, stable, heat-resistant surface. When you

put your iron onto its iron rest, make sure that the surface on which you put it is stable.

• This product has been designed for domestic and indoor use only. The manufacturer

will accept no responsibility and the guarantee will be terminated, if this product is used

for commercial purposes, inappropriate use or failure to comply with the instructions.

Environment protection first !

L Your appliance contains valuable materials which can be recovered or

recycled.

Â Leave it at a local civic waste collection point.

4

Durilium

TM

Soleplate Enamel Finish

Limited Lifetime Guarantee

valid in USA and Canada only

The manufacturer warrants the iron’s UltraglideTM soleplate Enamel finish to be free of

manufacturing defects for life of the iron from the date of purchase. This warranty only applies

as long as the iron heats up and does not cover damage due to accident, misuse or commercial

use and does not cover staining, discoloration or scratching of the enamel soleplate.

Defective products may be returned by the original purchaser or any subsequent owner, postage

pre-paid together with proof of purchase date to T-fal.

Defective products will be repaired, or at manufacturer’s discretion, replaced at no charge

including return postage.

Repairs not covered by this warranty will be performed at current cost for parts and labor plus

return postage. Manufacturer’s sole obligation and your exclusive remedy under this warranty are

limited to such repair or replacement of the soleplate. This is a limited warranty and is in lieu of

all other warranties, express or implied, including merchantability. This warranty gives you specific

legal rights. You may also have other legal rights varying from province to province, state to state.

If you have a claim:

Please read the Limited Guarantee carefully before you decide to return your product and contact

our Consumer Service Department.

What happens to my return?

If the inspection shows that the product is defective, under our Limited Lifetime Guarantee, T-fal

will attempt to repair or will replace the soleplate at no cost to you. If our inspection shows that

the product is not defective under our Limited Guarantee we will return it to you shipping charges

prepaid.

5

Remove any labels from the soleplate before

heating the iron.

Before using the steam function in your iron for the

first time, we recommend that you allow the iron

to operate a few moments in a horizontal position

without coming into contact with your laundry.

Keeping the iron in this position, push the turbo

steam trigger several times.

During the first few uses, the appliance may produce

smoke, a harmless odour and a light emission of

particles. These are simply the engineering residues

from the manufacturing process burning off. These

are harmless and will quickly disappear.

BEFORE FIRST USE

PREPARATION

Which water should I use?

• Your appliance was designed to operate using

untreated tap water. However, it is necessary to

periodically clean the steam chamber to remove any

mineral deposits.

• Do not use pure demineralised or pure distilled water,

water from clothes dryers, scented or softened water,

rain water, filtered, bottled or boiled water, water from

refrigerators, batteries or air conditioners, additives

water, condensation water or rain water as these may

damage the iron. These types of water contain organic

waste, mineral elements that become concentrated

when heated and cause spitting, brown staining,

leaking or premature wear on your iron.

If your water is very hard, mix 50% untreated

tap water with 50% distilled water (available in

hardware stores).

6

Filling the water tank

• Set the steam control to

• Lift the iron and, holding it at a slight incline, point the soleplate up.

• Open the water tank cover.

• Fill the water tank to the mark “MAX”.

• Close the water tank cover.

• Unplug the iron before filling it.

Max.

7

USE

Adjusting the temperature and steam

• Plug in the appliance.

= STEAM ZONE

FABRIC

TEMPERATURE

CONTROL

POSITION

LINEN

MAX

COTTON

•••

WOOL

••

SILK/SYNTHETIC

(Polyester, Acetate, Acrylic,

Polyamide))

•

STEAM CONTROL

POSITION

• Adjust the temperature and steam control, referring to the table

below.

• Select eco setting and set the thermostat on “••” to save energy

compared with the maximum position.

• The temperature indicator light turns on.

• It will turn off automatically once the soleplate achieves the

desired temperature.

8

Dry ironing

Getting more steam

Your iron heats quickly: begin with fabrics that require

lower temperatures.

When ironing fabrics with most delicate fibers: set the

ironing temperature for the most fragile fiber.

The iron will not heat up if the thermostat control is set

to “MIN”.

• Set the temperature according to the fabric to be ironed.

• Set the steam control to

• You may continue to iron when the indicator light turns off.

• Set the thermostat control to “MAX” or “•••”.

• Press the turbo steam button periodically (turbo steam).

• To avoid water dripping on the laundry, maintain an interval of a

few seconds in between each press.

max.

1

sec.

9

Vertical steam ironing

• Hang the item on a hanger. The steam is very hot; never

steam iron clothing while it is being worn - always use a

hanger.

• Set the thermostat control to “MAX”.

• Press the turbo steam button (turbo steam) in pulses, moving

the iron from top to bottom.

• Hold the iron at a distance of a few centimeters from the

clothing to avoid burning delicate fabrics.

• Repeat the action if needed

max.

1

sec.

NO

10

Dampening clothing (Spray)

• Press repeatedly on the spray button to moisten clothing and

remove stubborn creases.

• Ensure that there is water in the tank before using the spray

button.

Auto-off Function (according to model)

• If the iron remains unused for about 8 minutes on the heel

rest or about 30 seconds laid flat or on its side, the electronic

system will cut the power, the iron will stop heating and the

auto-off indicator will begin to flash.

• To restart the iron, move it gently until the indicator stops

flashing.

• Wait for the soleplate to achieve the desired temperature.

While ironing

• Do not lay the iron down on the soleplate; use the heel rest

for this purpose.

NO

OK

11

IRON STORAGE AND

MAINTENANCE

Storing your iron

• Unplug the iron and wait for the soleplate to cool (approx. 1hour).

• Empty the water tank.

• Set the steam control to

.

• Store the iron on its heel rest.

• Unplug your iron and empty the water tank.

1h

Cleaning the anti-calc valve (once per month)

12

• Extract the anti-calc valve vertically

• Soak the anti-calc valve for 4 hours in a glass with lemon juice.

• Rinse the anti-calc valve under the tap.

• Insert the anti-calc valve in place, pushing it until you hear a click.

Beware!

Never touch the end of the anti-calc valve.

The iron will not function without the anti-calc valve.

Click

4

h

13

Descaling the steam chamber (once per month)

• Allow your iron to heat up with a full water tank while on its heel

rest and with the temperature control set to maximum.

• Once the indicator light switches off, unplug the iron and place

it over a sink.

• To remove the anti-calc valve, extract it vertically

• Shake the iron gently in a horizontal position above the sink until

some of the water (containing the impurities) leaks from the

soleplate.

• To finish the process, replace the anti-calc valve collector, pushing

it until you hear a click.

• Plug in your iron for 2 minutes on the heel rest to dry the soleplate.

• Set the thermostat knob on MAX position.

Max.

Click

2

min.

14

• Unplug your iron and, once cooled (1hour min.), wipe it with a

soft cloth.

• Never use chemical or abrasive products.

Cleaning the soleplate

• While the soleplate is still warm, clean it with a damp non-metallic

pad.

• Never use chemical or abrasive products.

During the next use, turn on your iron in a horizontal position

without putting it into contact with your laundry in order to

eliminate any water containing mineral residues that remain

in the soleplate.

NO

15

IS THERE A PROBLEM WITH YOUR IRON?

PROBLEMS

POSSIBLE CAUSES

SOLUTIONS

Water is leaking

from the holes in

the soleplate.

You are using the steam when

the iron is not hot enough.

Wait for the indicator light to turn

off.

You are using the iron on eco

with steam control on max

position

.

See the chapter on “Adjusting the

temperature and steam”

You are using the turbo steam

trigger (turbo steam) too often.

Wait a few seconds between each

use.

You have stored the iron

horizontally without emptying

the water tank or setting the

steam control to

.

See the chapter on “Storing your

iron”.

The iron leaks

at the start of

ironing.

You have removed the anti-calc

valve to fill up your iron.

Do not remove the anti-calc valve

when filling the iron.

The steam control dial is not

set to

when filling the water

tank.

Ensure that the steam control dial

is set to

when filling the water

tank.

A brown

discharge

coming from

the soleplate

is staining the

clothing.

You are using chemical

descaling agents.

Do not introduce a descaling agent

into the water tank.

You are not using the right type

of water.

Clean the steam chamber and see

the chapter on “What water should

I use?”.

Clothing fibres are building up

in the holes of the soleplate

and burning.

Clean the steam chamber and the

soleplate with a damp sponge.

Periodically vacuum the holes in

the soleplate.

The soleplate is

dirty or brown

and may stain

clothing.

You are using starch. Clean the soleplate as indicated

above. Spray the starch on the

reverse side of the clothing to be

ironed.

Your laundry has not been

rinsed sufficiently or you are

ironing a new item of clothing

before washing it.

Ensure that your laundry is

sufficiently rinsed to eliminate

potential soap deposits or chemical

products on new items of clothing.

16

IS THERE A PROBLEM WITH YOUR IRON?

PROBLEMS POSSIBLE CAUSES SOLUTIONS

Your iron

produces little

to no steam.

The water tank is empty. Fill it up.

The anti-calc valve is dirty. Clean the anti-calc valve.

Your iron is clogged up with

limescale.

Clean the anti-calc valve and

steam chamber. See the chapter on

Descaling the steam chamber.

Your iron has been used for

too long in the dry ironing

function.

Clean the steam chamber. See the

chapter on Descaling the steam

chamber.

The soleplate

is scratched or

damaged.

You have placed your iron on

a metallic iron rest or ironed

over metal zips or fastners.

Always place your iron on its heel rest

when not in use.

Do not iron over metal zips or fastners.

The iron steams

once the water

tank has been

filled.

The steam control is not set to

.

Ensure that the steam control is set to

.

The water tank is too full. Do not exceed the max level for filling.

The spray does

not spray water.

The water tank is not full

enough.

Add water to the water tank.

If you have any problems or queries please call our Customer Relations

team first for expert help and advice.

See Helpline number in the separate guarantee

and country list leaflet.

17

Recommandations importantes de sécurité ....................................... p. 18

Avant la première utilisation ..................................................................... p. 21

Quelle eau utiliser ? ....................................................................................... p. 22

Remplissage du réservoir ............................................................................. p. 22

Réglez la température et la vapeur ......................................................... p. 23

Repassez à sec ................................................................................................. p. 24

Obtenez plus de vapeur ............................................................................... p. 24

Défroissez verticalement ............................................................................. p. 25

Humidifiez le linge (spray) .......................................................................... p. 26

En cours de repassage ................................................................................. p. 26

Fonction Auto-Stop (selon modèle) ........................................................ p. 26

Rangez votre fer .............................................................................................. p. 27

Nettoyez la tige Anti-Calcaire (une fois par mois) ............................ p. 27

Faites un auto-nettoyage (Self Clean) .................................................. p. 29

Nettoyez la semelle ........................................................................................ p.30

Problèmes, causes possibles, solutions ........................................... p. 31-32

PREPARATION

UTILISATION

NETTOYAGE ET ENTRETIEN

UN PROBLEME AVEC VOTRE FER ?

RECOMMANDATIONS IMPORTANTES DE SÉCURITÉ

SOMMAIRE

FR

La page charge ...

T-Fal Eco Master Iron FV1732 Manuel utilisateur

Ce manuel convient également à

T-Fal Eco Master Iron FV1732 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents