AT&T CL83107 Mode d'emploi

Marque: AT&T

Modèle: CL83107

Catégorie: Téléphones

Taper: Mode d'emploi

Quick start guide

CL83107/CL83207/CL83217/

CL83307/CL83317/CL83407/

CL83417/CL83487/CL83507/

CL83547

DECT 6.0 cordless telephone/

answering system with caller ID/

call waiting

Scan the QR code for

support information

Congratulations

on your purchase of this AT&T product. Before using this AT&T product, please read

the Important safety information section on pages 1-3 of this manual.

Both the model and serial numbers of your AT&T product can be found on the

bottom of the telephone base. Save your sales receipt and original packaging in

case it is necessary to return your telephone for warranty service.

For customer service, please visit our website at https://telephones.att.com

or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

Parts checklist

Your telephone package contains the following items.

Power adapter for

telephone base

Telephone baseQuick start guide Smart call blocker

leaet

Please refer to the online CL83107/CL83207/CL83217/CL83307/

CL83317/CL83407/CL83417/CL83487/CL83507/CL83547 DECT 6.0

cordless telephone/answering system with caller ID/call waiting

Complete user’s manual for a full set of installation and operation

instructions at https://telephones.att.com/manuals.

Quick start guide

CL83107/CL83207/CL83217/

CL83307/CL83317/CL83407/

CL83417/CL83487/CL83507/

CL83547

DECT 6.0 cordless telephone/

answering system with caller

ID/call waiting

Scan the QR code for

support information

Telephone

line cord

Cordless handset

(2 for CL83207/CL83217)

(3 for CL83307/CL83317)

(4 for CL83407/CL83417/

CL83487)

(5 for CL83507/

CL83547)

Charger for cordless

handset with power

adapter installed

(1 for CL83207/CL83217)

(2 for CL83307/CL83317)

(3 for CL83407/CL83417/

CL83487)

(4 for CL83507/ CL83547)

Battery for cordless

handset

(2 for CL83207/CL83217)

(3 for CL83307/CL83317)

(4 for CL83407/CL83417/

CL83487)

(5 for CL83507/ CL83547)

Battery compartment cover

(2 for CL83207/CL83217)

(3 for CL83307/CL83317)

(4 for CL83407/CL83417/CL83487)

(5 for CL83507/ CL83547)

Wall-mount

bracket

Important safety information

This symbol is to alert you to important operating or servicing instructions

that may appear in this user’s manual. Always follow basic safety precautions

when using this product to reduce the risk of injury, re, or electric shock.

Safety information

fRead and understand all instructions in the user’s manual. Observe all markings

on the product.

fAvoid using a telephone during a thunderstorm. There may be a slight chance of

electric shock from lightning.

fDo not use a telephone in the vicinity of a gas leak. Under certain circumstances,

a spark may be created when the adapter is plugged into the power outlet, or

when the handset is replaced in its cradle. This is a common event associated with

the closing of any electrical circuit. In an inadequately ventilated environment,

the user should not plug the phone into a power outlet, nor put a charged

handset into the cradle where there are concentrations of ammable or ame-

supporting gases. A spark in such an environment could create a re or explosion.

Such environments might include: medical use of oxygen without adequate

ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural

gas; etc.

fDo not use this product near water or when you are wet. For example, do not

use it in a wet basement or shower, nor next to a swimming pool, bathtub,

kitchen sink and laundry tub. Do not use liquids or aerosol sprays for cleaning.

If the product comes in contact with any liquid, unplug any line or power cord

immediately. Do not plug the product back in until it has dried thoroughly.

fInstall this product in a protected location where no one can trip over any line or

power cords. Protect cords from damage or abrasion.

fIf this product does not operate normally, see the Troubleshooting section of

the online Complete user’s manual. If you cannot solve the problem, or if the

product is damaged, refer to the Limited warranty section (pages 35 - 37).

Do not open this product except as directed in your user’s manual. Opening the

product or reassembling it incorrectly may expose you to hazardous voltages or

other risks.

fReplace batteries, only as described in your user’s manual (Page 6). Do not

burn or puncture batteries — they contain caustic chemicals.

fThis power adapter is intended to be correctly oriented in a vertical or oor

mount position. The prongs are not designed to hold the plug in place if it is

plugged into a ceiling or an under-the-table/cabinet outlet.

fFor pluggable equipment, the socket-outlet shall be installed near the equipment

and shall be easily accessible.

CAUTIONS:

fUse only the power adapter provided with this product. To obtain a replacement,

visit our website at https://telephones.att.com or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

Important safety information

CAUTION: To prevent risk of re or battery explosion, replace with the correct

battery type. Dispose of used batteries according to the instructions.

fDisconnect the telephone line from the equipment before open the battery door.

Do not use the battery in following conditions:

fHigh or low extreme temperature during use, storage or transportation.

fReplacement of a battery with an incorrect type that can defeat a safeguard.

fDisposal of a battery into fire or a hot oven, or mechanically crushing or

cutting of a battery, that can result in an explosion.

fLeaving a battery in an extremely high temperature surrounding

environment that can result in an explosion or the leakage of flammable

liquid or gas.

fA battery subjected toextremely low air pressure that can result in an

explosion or the leakage of flammable liquid or gas.

se only the supplied rechargeable battery or replacement battery (model

BT183342/BT283342).

To order, visit our website at

https://telephones.att.com, or call 1 (800) 222-3111. In

Canada, dial 1 (866) 288-4268.

fThe applied nameplate is located at the bottom or near of the product.

Especially about cordless telephones

fPrivacy: The same features that make a cordless telephone convenient create

some limitations. Telephone calls are transmitted between the telephone base

and the handset by radio waves, so there is a possibility that your cordless

telephone conversations could be intercepted by radio receiving equipment within

range of the cordless handset. For this reason, you should not think of cordless

telephone conversations as being as private as those on corded telephones.

fElectrical power: The telephone base of this cordless telephone must be

connected to a working electrical outlet which is not controlled by a wall switch.

Calls cannot be made from the handset if the telephone base is unplugged,

switched o or if the electrical power is interrupted.

fPotential TV interference: Some cordless telephones operate at frequencies

that may cause interference to TVs and VCRs. To minimize or prevent such

interference, do not place the telephone base of the cordless telephone near

or on top of a TV or VCR. If interference is experienced, moving the cordless

telephone farther away from the TV or VCR will oen reduce or eliminate the

interference.

fRechargeable batteries: This product contains nickel-metal hydride rechargeable

batteries. Exercise care in handling batteries in order not to create a short

circuit with conductive material such as rings, bracelets, and keys. The battery or

conductor may overheat and cause harm. Observe proper polarity between the

battery and the battery charger.

Important safety information

fNickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe

manner. Do not burn or puncture. Like other batteries of this type, if burned or

punctured, they could release caustic material which could cause injury.

The RBRC Seal means that the manufacturer is voluntarily

participating in an industry program to collect and recycle nickel-

metal hydride rechargeable batteries when taken out of service

within the United States. These batteries may be taken to a

participating local retailer of replacement batteries or recycling

center. You may call 1-800-8-BATTERY® for locations accepting

spent Ni-MH batteries.

The RBRC Seal and 1-800-8-BATTERY® are registered trademarks of

Call2recycle, Inc.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless telephones):

Wireless Technology Research, LLC (WTR), an independent research entity, led

a multidisciplinary evaluation of the interference between portable wireless

telephones and implanted cardiac pacemakers. Supported by the U.S. Food and

Drug Administration, WTR recommends to physicians that:

Pacemaker patients:

fShould keep wireless telephones at least six inches from the pacemaker.

fShould NOT place wireless telephones directly over the pacemaker, such as in a

breast pocket, when it is turned ON.

fShould use the wireless telephone at the ear opposite the pacemaker.

WTR’s evaluation did not identify any risk to bystanders with pacemakers from

other persons using wireless telephones.

ECO mode

This power conserving technology reduces power consumption for optimal battery

performance. The ECO mode activates automatically whenever the handset is

synchronized with the telephone base.

Especially about telephone answering systems

Two-way recording: This unit does not sound warning beeps to inform the other

party that the call is being recorded. To ensure that you are in compliance with any

federal or state regulations regarding recording a telephone call, you should start

the recording process and then inform the other party that you are recording the

conversation.

SAVE THESE INSTRUCTIONS

Table of contents

Important safety information ....................................................................................................1

Install ...........................................................................................................................................................5

Wall-mount installation (optional) ......................................................................................... 7

Handset overview ..............................................................................................................................8

Telephone base overview ............................................................................................................11

Initial basic settings ........................................................................................................................14

Date and time ................................................................................................................................14

Smart call blocker setup via voice guide .....................................................................14

Basic answering system setup via voice guide .......................................................15

Record your own announcement .....................................................................................15

Number of rings............................................................................................................................15

Ringer volume ................................................................................................................................16

LCD language .................................................................................................................................16

Voice language ..............................................................................................................................16

Dial mode ..........................................................................................................................................16

Temporary tone dialing ........................................................................................................... 17

Set speed dial voicemail number .....................................................................................17

Operate ................................................................................................................................................... 17

Directory ................................................................................................................................................19

Caller ID .................................................................................................................................................. 20

Caller ID announce .....................................................................................................................20

Review and dial a number in the call log .....................................................................20

Delete a caller ID log entry ...................................................................................................20

Erase missed calls indicator in the call log ................................................................ 20

Smart call blocker *§ ....................................................................................................................... 21

Turn Smart call blocker on or o ......................................................................................21

Call controls .....................................................................................................................................21

Call block settings ......................................................................................................................24

Block the caller while on a call ............................................................................................25

Unblock a telephone number .............................................................................................25

Answering system .......................................................................................................................... 26

About answering system and voicemail .....................................................................26

Turn answering system on or o ......................................................................................27

Message alert tone.....................................................................................................................27

Call screening .................................................................................................................................27

Message playback ......................................................................................................................28

For C-UL compliance .....................................................................................................................29

FCC Part 68 and ACTA ...................................................................................................................33

FCC Part 15 ........................................................................................................................................... 34

Limited warranty ..............................................................................................................................35

Technical specications ..............................................................................................................38

Install

Telephone base

Notes:

f Plug one end of the telephone line cord into a telephone jack or a DSL lter.

f If you have DSL high-speed Internet service, a DSL lter (not included) is required.

Charger

Caution: Use only the power adapter(s) provided with this product. To obtain a

replacement, visit our website at

https://telephones.att.com or call 1 (800) 222-3111. In Canada, dial

1 (866) 288-4268.

Battery

Install the battery, as shown below.

Caution: Use only the supplied rechargeable battery or replacement battery

(model BT183342/BT283342).

Install

Charge your handset(s) before initial use. The battery is fully charged aer 10

hours of continuous charging. The CHARGE light on the top of the handset is on

during charging.

THIS SIDE UP /

CE CÔTÉ VERS LE HAUT

Wall-mount installation (optional)

Plug the telephone line into

the telephone base.

Insert the extended tabs of

the wall-mount bracket into

the slots on the back of the

telephone base. Push the

telephone base down until it is

securely in place.

Plug the power adapter into a

power outlet not controlled by

a wall switch. Plug the other end

of the power adapter into the

telephone base.

Align the holes on the wall-mount

bracket with the standard wall

plate and slide the wall-mount

bracket down until it locks

securely.

Handset overview

Handset

CHARGE light fOn when the handset is charging in the telephone base

or charger.

PUSH TO TALK fPress to initiate a one-to-one or one-to-group

broadcast.

fPress and hold to broadcast to a group of system

devices.

REDIAL

PAUSE

fPress repeatedly to view the last ten numbers dialed.

fWhile entering numbers, press and hold to insert a

dialing pause.

SELECT

fWhen the handset is not in use, press to show the menu.

fWhile in the menu, press to select an item or save an

entry or setting.

FLASH

PHONE

fPress to make a call.

fPress to answer a call.

fDuring a call, press to answer an incoming call when

you receive a call waiting alert.

fDuring message playback, press to call back the caller if

the caller’s number is available.

Handset overview

Handset

CANCEL

OFF

fDuring a call, press to hang up.

fWhile in a menu, press to cancel an operation.

fPress to back up to the previous menu.

fPress and hold to exit the menu display completely.

fWhen the handset is ringing, press to mute the ringer

temporarily.

fPress and hold while the telephone is not in use to

erase the missed call indicator.

DIR fPress DIR to show directory entries when the handset

is not in use.

fPress to scroll up or down while in menus.

fWhile entering names or numbers, press to move the

cursor to the le or right.

fPress to increase or decrease the listening volume

when on a call.

fPress to increase or decrease the message playback

volume.

CID fPress CID to show caller ID log when the handset is not

in use.

fPress and hold to set or dial your voicemail number.

fPress to switch to tone dialing temporarily during a call

if you have pulse service.

fWhile entering names, press to change the next letter

to upper or lower case.

fPress repeatedly to display other dialing options when

reviewing a caller ID log entry.

fPress and hold to enter the QUIET mode setting screen,

or to deactivate QUIET mode.

fPress to make or answer a call using the speakerphone.

MUTE

DELETE

fDuring a call, press to mute the microphone.

fPress to delete digit or character.

CALL BLOCK fPress to block the incoming call when the telephone is

ringing.

fWhen on a call, press to block the call.

fWhen the handset is not in use, press to show the call

block menu.

Handset display

The battery icon ashes when the battery is low and needs

charging.

The battery icon animates when the battery is charging.

The battery icon becomes solid when the battery is fully charged.

The handset speakerphone is in use.

The handset ringer is turned o.

There are new voicemail received from the telephone service

provider.

ANS ON The built-in answering system is turned on.

There are new messages in the built-in answering system.

NEW The entry you are reviewing is new in the caller ID log.

MUTE The handset microphone is o.

10:30AM

PM Time with AM and PM.

10/16

MSG # The message number currently playing and total number of new/

old messages recorded.

Handset overview

HANDSET 1

ANS ON

10:30

AM 10/16

MSG #

MUTE

NEW

Telephone base overview

Telephone base

MIC fMicrophone

VOL / VOL fWhile in idle mode, press to adjust the base ringer

volume.

fDuring message playback, press to adjust the

listening volume.

IN USE indicator fOn when the telephone is in use.

fOn when the answering system is answering an

incoming call.

fFlashes when another telephone is in use on the

same line.

CANCEL fWhile in a menu, press to cancel an operation,

back up to the previous menu; or press and hold

to go exit menu display completely.

fWhen the telephone base is ringing, press to mute

the ringer temporarily.

fWhen the telephone base is not in use, press and

hold to erase the missed call indicator.

Telephone base overview

Telephone base

FLASH/PTT fPress to initiate a one-to-one or one-to-group

broadcast.

fPress and hold to broadcast to a group of system

devices.

fDuring a call, press to answer an incoming call

when you receive a call waiting alert.

FIND HS fWhile the phone is idle, press to page all handsets.

DIR fPress DIR to show directory entries when the

telephone base is not in use.

CID fPress CID to show caller ID log when the

telephone base is not in use.

MENU/SELECT fWhen the telephone base is not in use, press to

show the menu.

fWhile in the menu, press to select an item or save

an entry or setting.

/CALL BLOCK fPress to block the incoming call when the

telephone is ringing.

fWhen on a call, press to block the call.

fWhen the telephone base is not in use, press to

show the call block menu.

REDIAL/PAUSE fPress repeatedly to view the last ten numbers

dialed.

fWhile entering numbers, press and hold to insert a

dialing pause.

/ ANS ON/OFF fPress to turn the built-in answering system on or

o.

/ REPEAT fPress to repeat a message.

fPress twice to play the previous message.

/ SKIP fPress to skip a message

/ PLAY/STOP fPress to start message playback.

fPress to stop message playback.

Telephone base

MUTE/DELETE fDuring a call, press to mute the microphone.

fPress to delete digit or character.

fPress to delete the message currently playing.

fPress twice to delete all old messages when the

telephone is not in use.

/ SPEAKER fPress to make or answer a call using the

speakerphone.

1 fPress and hold to set or dial your voicemail

number.

TONE /a>A fPress to switch to tone dialing temporarily during

a call if you have pulse service.

fWhile entering names, press to change the next

letter to upper or lower case.

QUIET/# fPress and hold to enter the QUIET mode setting

screen, or to deactivate QUIET mode.

Telephone base overview

Initial basic settings

Aer you install your telephone or power returns following a power outage, the

handset and telephone base will prompt you to set the date and time. To skip

setting the date and time, press on the handset or CANCEL on

the telephone base.

Voice guide to set Smart call blocker and

answering system

Aer the date and time setting is done or skipped, the telephone base will prompt if

you want to set Smart call blocker. Press MENU/SELECT to start the Smart call blocker

setup via voice guide. To skip the setup, press CANCEL on the telephone base.

Aer the Smart call blocker setting is done or skipped, the telephone base will then

prompt if you want to set up the answering system. Press MENU/SELECT to start the

answering system setup via voice guide. To skip the setup, press CANCEL on the

telephone base.

We recommend you program your telephone system before use. The following are

a few examples of common features to set before using the telephone. Refer to the

Handset settings, Telephone base settings and Answering system settings in the

Complete user’s manual for detailed instructions on setting all telephone features.

Date and time

Note: Set the date/time before using the answering system.

Using a cordless handset or the telephone base:

1. MENU -> or -> Set date/time -> SELECT.

2. Enter the month (MM), day (DD) and year (YY) using the dialing keys -> SELECT.

3. Enter the hour (HH) and minute (MM) using the dialing keys.

4. or to choose AM or PM -> SELECT.

Smart call blocker setup via voice guide

You can follow the voice guide to set up Smart call blocker.

Using the telephone base:

1. CALL BLOCK.

2. / -> Voice guide -> SELECT.

3. Press 1 if you want to screen calls with telephone numbers that are not saved in

your directory, allow list or star name list; or press 2 if you only want to screen

calls that do not display a phone number; or press 3 if you do not want to screen

calls, and want to allow all incoming calls to get through.

Basic answering system setup via voice guide

You can follow the voice guide to record your own announcement, set the number

of rings and set the message alert tone.

You can also restart the voice guide to set answering system using the telephone

base:

1. MENU -> or -> Answering sys -> SELECT.

2. or -> Voice guide -> SELECT.

3. Set up the answering system by inputting the designated numbers, as

instructed.

Record your own announcement

Your outgoing announcement plays when calls are answered by the answering

system. You can use the preset announcement to answer calls, or replace it with

your own recorded announcement.

Using a cordless handset or telephone base:

1. MENU -> or -> Answering sys -> SELECT.

2. SELECT to select Announcement.

3. SELECT to select Record annc.

4. Speak towards the handset or telephone base to record your announcement

and press 5 to end recording and save it.

Number of rings

You can set the answering system to answer an incoming call aer 2, 3, 4, 5, or 6

rings. You can also select toll saver. If you choose toll saver, the answering system

answers a call aer two rings when you have new messages, and aer four rings

when there are no new messages. This enables you to check for new messages and

avoid paying unnecessary long distance charges if you are calling from out of your

local area.

If you want the built-in answering system instead of the voicemail to answer a call,

you should set the answering system to answer a call at least two rings before the

voicemail is set to answer. Contact your telephone service provider for information

on your voicemail settings.

Using a cordless handset or the telephone base:

1. MENU -> or -> Answering sys -> SELECT.

2. or -> Ans sys setup -> SELECT.

3. or -> # of rings -> SELECT.

4. or to choose among 2, 3, 4, 5, 6, or Toll saver -> SELECT.

Initial basic settings

Ringer volume

You can set the ringer volume level to one of the six levels, or turn the ringer o.

Using a cordless handset or the telephone base:

1. MENU -> or -> Ringers -> SELECT.

2. SELECT to select Ringer volume.

3. or to choose the desire level -> SELECT.

LCD language

Using a cordless handset or the telephone base:

1. MENU -> or -> Settings -> SELECT.

2. SELECT again to select LCD language.

3. or to choose English, Français or Español -> SELECT.

Note: If you accidentally change the LCD language to French or Spanish, you can reset it back

to English without going through the French or Spanish menus.

f Press MENU on the handset in idle mode -> enter 364#.

Voice language

Note: This feature is available in Canada version only.

You can select the voice language (English or French) to be used for the voice

prompts in your answering system and caller ID announce.

Using a cordless handset or the telephone base:

1. MENU -> or -> Settings -> SELECT.

2. or to choose Voice language -> SELECT.

3. or to choose English or Français -> SELECT.

Dial mode

The dial mode is preset to touch-tone dialing. If you have pulse (rotary) service, you

need to change the dial mode to pulse dialing before using the telephone to make

a call.

Using a cordless handset or the telephone base:

1. MENU -> or -> Settings -> SELECT.

2. or -> Dial mode -> SELECT.

3. or to choose Touch-tone or Pulse -> SELECT.

Initial basic settings

Operation Steps

Make a call Using the cordless handset:

Press

PHONE or /SPEAKER -> Enter the telephone number.

Using the telephone base:

Press /SPEAKER -> Enter the telephone number.

On-hook dialing

(predialing) Using the cordless handset:

Enter the telephone number -> Press

PHONE or

/SPEAKER to call.

Using the telephone base:

Enter the telephone number -> Press /SPEAKER to call.

Temporary tone dialing

If you have pulse (rotary) service only, you can switch from pulse to touch-tone

dialing temporarily during a call. This is useful if you need to send touch-tone signals

to access your telephone banking or long distance services.

1. During a call, press TONE .

2. Use the dialing keys to enter the number. The telephone sends touch-tone

signals. The telephone automatically returns to pulse dialing mode aer you end

the call.

Set speed dial voicemail number

If you subscribe to a voicemail service offered by your telephone service provider,

you can save the voicemail number to 1 on each handset for easy access. When

you want to retrieve voicemail messages, press and hold 1.

Using a cordless handset or the telephone base:

1. MENU -> or -> Settings -> SELECT.

2. or -> Voicemail # -> SELECT.

3. Enter the voicemail number (up to 30 digits) -> SELECT to save.

Note: Contact your telephone service provider for more information and assistance about your

voicemail service.

Initial basic settings

Operate

Operation Steps

Answer a call Using the cordless handset:

Press

PHONE or /SPEAKER, or press any dialing keys (0-

9, TONE or #).

Using the telephone base:

Press /SPEAKER, or press any dialing keys (0-9, TONE or #).

End a call Using the cordless handset:

Press

OFF or return the handset to the telephone base or

charger.

Using the telephone base:

Press /SPEAKER.

Handset

speakerphone During a call, press /SPEAKER to switch between

handsfree speakerphone and normal handset use.

Redial Using the cordless handset:

Press REDIAL repeatedly to select the desired entry ->

PHONE or /SPEAKER to call.

Using the telephone base:

Press REDIAL repeatedly to select the desired entry ->

/SPEAKER to call.

Volume control Using the cordless handset:

Press to decrease or press to increase the listening

volume during a call.

Using the telephone base:

Press VOL to decrease or press VOL to increase the

listening volume during a call.

Call waiting

(Requires

subscription

from telephone

service provider)

Press FLASH on the handset or telephone base to put

current call on hold and to take the new call; press again to

switch back and forth between calls.

La page est en cours de chargement...

AT&T CL83107 Mode d'emploi

Marque: AT&T

Modèle: CL83107

Catégorie: Téléphones

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: AT&T CL83107 Operating instructions

AT&T CL83107 Mode d'emploi

AT&T CL83107 Mode d'emploi

dans d''autres langues

Documents connexes