Philips SpeechMike LFH 3520 Manuel utilisateur

LFH3520

EN User manual 3

DE Benutzerhandbuch 17

FR Manuel de l‘utilisateur 31

ES Manual del usuario 45

IT Manuale di istruzioni 59

NL Gebruikershandleiding 73

SV Användarhandbok 87

For product information and support, visit

www.philips.com/dictation SPEECHMIKE PREMIUM

3User manual

1 Important 4

2 Your SpeechMike 6

2.1 What’s in the box 6

2.2 Overview 7

3 Get started 8

3.1 Installation 8

4 Use your SpeechMike 9

4.1 Create a recording 9

5 Use more of your SpeechMike 10

5.1 Customize the SpeechMike 10

5.1.1 Customize SpeechMike keys and

settings 10

5.1.2 Use application shortcuts 11

5.1.3 Use the motion sensor 12

5.2 Update the ﬁrmware 13

6 Technical data 14

7 Frequently asked questions 15

User manual

ENGLISH

4User manual

A Caution

Do not try to open the unit. Allow only

authorized service technicians to repair the unit.

Use of controls, adjustments or performance

of procedures other than those speciﬁed herein

may result in hazardous laser light exposure.

Small children

Your device and its enhancements may contain

small parts. Keep them out of the reach of small

children.

Compliance with EMF

Koninklijke Philips Electronics N.V. manufactures

and sells many products targeted at consumers,

which, like any electronic apparatus, in

general have the ability to emit and receive

electromagnetic signals. One of Philips’ leading

Business Principles is to take all necessary

health and safety measures for our products,

to comply with all applicable legal requirements

and to stay well within the EMF standards

applicable at the time of producing the products.

Philips is committed to develop, produce and

market products that cause no adverse health

eects. Philips conﬁrms that if its products are

handled properly for their intended use, they

are safe to use according to scientiﬁc evidence

available today. Philips plays an active role in the

development of international EMF and safety

standards, enabling Philips to anticipate further

developments in standardisation for early

integration in its products.

Cleaning and disinfection

• Unplug the device from the computer before

cleaning.

• Use a soft cloth, if necessary dampened with

a minimum amount of water or diluted mild

soap, to clean the product.

• Products for disinfection of surfaces in clinical

1 Important

The manufacturer reserves the right to change

products at any time without being obliged to

adjust earlier supplies accordingly.

The material in this manual is believed

adequate for the intended use of the system.

If the product, or its individual modules or

procedures, are used for purposes other than

those speciﬁed herein, conﬁrmation of their

validity and suitability must be obtained.

Safety

• To avoid a short circuit, do not expose the

product to rain or water.

• Do not expose the device to excessive heat

caused by heating equipment or direct sunlight.

• Protect the cables from being pinched,

particularly at plugs and the point where they

exit from the unit.

• Back up your ﬁles. Philips is not responsible

for any loss of data.

SpeechMike Barcode

B Class 1 laser product

This product complies with:

• 21CFR1040.10 and 1040.11 except for

deviations pursuant to Laser Notice No. 50,

dated July 26, 2001.

• EN60825-1:1994 + A1:2002 + A2:2001

• IEC60825-1:1993 + A1:1997 + A2:2001

The laser classiﬁcation is marked near the

scanner window on the product.

Class 1 Laser devices are not considered to

be hazardous when used for their intended

purpose. The following statement is required to

comply with US and international regulations:

5User manual

areas and patient care equipment, such as

surface disinfectant wipes, can be used to

clean the device.

• Do not use harsh chemicals or strong

detergents.

• Do not rub or strike the surface with

anything hard as this may scratch or damage

the surface permanently.

Disposal of your old product

• Your product is designed and manufactured

with high quality materials and components

that can be recycled and re-used.

• When this crossed-out wheeled bin

symbol is attached to a product, it

indicates that the product is covered

by the European Directive 2002/96/EC.

• Become informed about your local separate

collection system for electrical and electronic

products.

• Act according to your local rules and do

not dispose of old products with normal

household waste. The correct disposal of old

products will help prevent potential negative

consequences for the environment and human

health.

ENGLISH

6User manual

2 Your SpeechMike

Congratulations on your purchase and welcome

to Philips!

Visit our website for comprehensive support

such as user manuals, software downloads,

warranty information and much more:

www.philips.com/dictation.

2.1 What’s in the box

Dictation microphone

Quick start guide

CD-ROM containing software

and user manual

USB cable

For product information and support, visit

www.philips.com/dictation

LFH3510

LFH3610

with integrated

bar code scanner

SPEECHMIKE PREMIUM

EN Quick start guide

DE Kurzanleitung

FR Guide de démarrage rapide

ES Guía de inicio rápido

IT Guida rapida di introduzione

NL Snelle startgids

SV Snabbstartsguide

Hanging bracket

7User manual

2.2 Overview

1 Microphone

2 Record indicator light

3 • EOL end-of-letter key,

•• PRIO priority key

4 INS/OVR Insert/overwrite key

5 Slide switch (b fast forward, PLAY play/

record, f stop/pause, c rewind)

6 Instruction

7 d Record

8 Trackball, left mouse button

9 Left mouse button

10 Right mouse button

11 F1, F2, F3, F4 Programmable function keys

12 Speaker

13 USB cable

14 Programmable function key

15 Left mouse button

1

4

8

2

3

76

5

109

12

11

14

13

15

ENGLISH

8User manual

3 Get started

3.1 Installation

Recording and playback of dictations with the

SpeechMike requires dictation software such

as Philips SpeechExec to be installed on the

computer. When third-party dictation software

other than Philips SpeechExec is used, driver

software must be installed before connecting

the SpeechMike.

C Important

Administrator rights are required to install

the software. For more help, contact your

administrator.

1 Turn on the computer.

2 Connect the dictation microphone to the

computer using the USB cable.

3 The New Hardware Found message is

displayed and installation will proceed

automatically.

D Note

If the message does not appear, verify if

the USB port is enabled in the BIOS of the

system. See the hardware documentation

for details, or contact your hardware

vendor.

4 Restart the PC when prompted by Windows.

5 Insert the installation CD in the CD-ROM

drive. The set-up program should start

automatically. If it does not, open the CD

contents in Windows Explorer and double-

click the autorun.exe ﬁle.

6 Click the Install button.

7 Follow the on-screen instructions of the

set-up program.

9User manual

4 Use your SpeechMike

This chapter describes how to use the

SpeechMike with Philips SpeechExec dictation

software. If the SpeechMike is used with third-

party software other than Philips SpeechExec,

some features may not be present or function

dierently. For detailed information, refer to the

documentation delivered with the software.

4.1 Create a recording

1 The dictation microphone must be

connected to the computer with the USB

cable.

2 Start SpeechExec dictation software.

3 Press the d RECORD key to create a new

recording and enter Record standby mode.

• The recorder window is displayed.

• The record indicator light ﬂashes red (in

overwrite mode) or green (in insert mode).

4 Move the slide switch to the PLAY position

and start speaking.

The record indicator light glows in red (in

overwrite mode) or green (in insert mode) while

recording.

5 For short pauses, move the slide switch to

the f position. To continue recording,

move the slide switch back into the PLAY

position.

6 To stop recording, move the slide switch to

the f position and press the d RECORD

key.

7 Press the • EOL/• • PRIO key to mark the

recording as ﬁnished.

• The dictation ﬁle is moved to the Finished

dictations folder.

• The recorder window closes and the work list

window is displayed.

8 To assign priority status to the recording,

press the • EOL/• • PRIO key again within half

a second.

D Note

For best results, speak clearly and keep the

microphone about 10 to 15 centimeters (4 to 6

inches) away from your mouth.

ENGLISH

10 User manual

4 Click the Upload button to save the new

settings.

D Note

The SpeechMike can be reset to its factory

default conﬁguration by clicking the Defaults

button. Click the Upload button to save the

default settings.

E Tips

• To test settings and key functions, use the

Device test section on the Device tab.

• Press and hold the left and right mouse

button on the SpeechMike simultaneously

until the LEDs ﬂash to activate and deactivate

all mouse functions.

5 Use more of your

SpeechMike

5.1 Customize the SpeechMike

Use the Device Control Center software to

customize the SpeechMike to suit individual user

needs.

The software allows to assign dierent functions

to each key, enable or disable certain features

and also to start and control applications with

the SpeechMike.

5.1.1 Customize SpeechMike keys and

settings

1 The dictation microphone must be

connected to the computer with the USB

cable.

2 If the option to start the Device Control

Center automatically was selected during

installation, open the program by clicking

the icon in the notiﬁcation area of the

Windows task bar. To manually start the

program, open the Windows start menu in

Windows and select All Programs > Philips

Speech Control > Philips Device Control

Center.

The current settings are automatically

downloaded from the connected SpeechMike.

3 On the Device tab, conﬁgure device settings

and select the function to be assigned to

each key.

11User manual

SpeechMike key Assigned shortcut

d Record Record (push to dictate)

PLAY Play Play from cursor position

c Rewind Move cursor backwards

b Fast forward Move cursor forwards

• EOL/•• PRIO Mark backwards

INS/OVR Open correction window

g Instruction Choose 2

Powerpoint proﬁle

Use this proﬁle to control Powerpoint

presentations with the SpeechMike. The

following settings are deﬁned:

SpeechMike key Assigned shortcut

d Record Black screen

PLAY Play White Screen

c Rewind Go to previous slide

b Fast forward Go to next slide

• EOL/•• PRIO End slide show

INS/OVR Show/hide cursor

D Note

Philips cannot guarantee the proper function of

all assigned shortcuts, since shortcuts can dier

among versions and languages.

Program a custom proﬁle

It is possible to program shortcuts for other

applications to control application functions

with the keys of the SpeechMike.

1 The dictation microphone must be

connected to the computer with the USB

cable.

2 If the option to start the Device Control

Center automatically was selected during

installation, open the program by clicking

the icon in the notiﬁcation area of the

Windows task bar. To manually start the

program, open the Windows start menu in

Windows and select All Programs > Philips

Speech Control > Philips Device Control

Center.

5.1.2 Use application shortcuts

The Device Control Center software allows to

start and control other applications with the

keys on the SpeechMike.

The Device Control Center software includes

pre-installed proﬁles that make the SpeechMike

ready for immediate operation with Dragon

NaturallySpeaking speech recognition software

and Microsoft Powerpoint. Additional proﬁles

for other applications can be programmed.

1 If the option to start the Device Control

Center automatically was selected during

installation, the application icon appears

in the notiﬁcation area of the Windows task

bar. To manually start the program, open the

Windows start menu in Windows and select

All Programs > Philips Speech Control >

Philips Device Control Center.

2 Right-click on the application icon in

the notiﬁcation area of the Windows task

bar and verify that ‘Acitvate application

control’ is enabled. If the option is disabled,

the conﬁgured settings and buttons will not

function for any of the target applications.

D Note

Exit Philips SpeechExec software when using

application shortcuts to prevent unintentional

recording when controlling other applications.

Default proﬁle

The default proﬁle is applied automatically when

there is no proﬁle assigned to an application in

focus. This proﬁle is set up to control Dragon

NaturallySpeaking with your SpeechMike. The

following settings are deﬁned:

ENGLISH

12 User manual

• Dragon NaturallySpeaking command

• Delay

7 You can add one operation or a sequence of

operations for every shortcut.

8 Click the Apply button to save the new

settings.

D Note

The Device Control Center cannot be used

to program application shortcuts for Philips

SpeechExec software. Shortcuts for Philips

SpeechExec can be conﬁgured in the General

settings menu of SpeechExec. See the SpeechExec

application help for more information.

E Tip

Application control conﬁguration settings can be

saved into ﬁles and imported later to apply the

same conﬁguration settings to several devices.

5.1.3 Use the motion sensor

The SpeechMike features an integrated motion

sensor that detects when the device is put

on the table and is being picked up again.

The motion sensor can mute and unmute the

microphone automatically or custom functions

can be programmed, e.g., to pause and to

continue recording. Use the Device Control

Center software to enable automatic muting of

the microphone (Device tab > Advanced settings)

or to program custom functions (Application

control tab).

E Tip

Press and hold the F2 and F4 keys on the

SpeechMike simultaneously until the record

3 On the tab Application control, click the

button to create a new proﬁle.

4 Browse and select the application

executable and click on OPEN.

A proﬁle for the selected application will be

added to the list of proﬁles.

D Note

Exit the target application during

conﬁguration. Open the application when

the device conﬁguration settings are saved.

5 Select a button from the button colum and

click the icon to assign a shortcut. You

can assign dierent shortcuts for pressing

and releasing a key.

The shortcut editor window is displayed.

6 Enter name for the shortcut and click

the Add button add an opertion for the

shortcut. The following options are available:

• Hotkey: Assign a keyboard shortcut

• Text: Enter the text to be inserted when

a key on the SpeechMike is pressed

• Start an application by pressing a key on

the SpeechMike

• Mouse button

13User manual

indicator light ﬂashes to activate and deactivate

the automatic muting of the microphone using

the motion sensor.

5.2 Update the firmware

Your SpeechMike is controlled by an internal

program called ﬁrmware. Newer versions of the

ﬁrmware may have been released after you have

purchased the SpeechMike.

1 Download the ﬁrmware update for your

SpeechMike model from www.philips.com/

dictation.

2 The dictation microphone must be

connected to the computer with the USB

cable.

3 If the option to start the Device Control

Center automatically was selected during

installation, open the program by clicking

the icon in the notiﬁcation area of the

Windows task bar. To manually start the

program, open the Windows start menu in

Windows and select All Programs > Philips

Speech Control > Philips Device Control

Center.

4 On the Device tab, click on Firmware

update.

5 Click the Import button and select the

folder with the ﬁrmware ﬁles to be

imported.

6 Click the Upgrade button to install the new

ﬁrmware.

• The ﬁrmware upgrade takes about 30

seconds.

• During ﬁrmware upgrade the indicator lights

of the SpeechMike will be ﬂashing.

B Warning

Do not disconnect the dictation microphone

from the computer during ﬁrmware upgrade.

This might damage your product.

ENGLISH

14 User manual

Operation conditions

• Temperature: 5°–45° C / 41°–113° F

• Humidity: 10 %–90 %

Dimensions

• Product dimensions (W × D × H):

45 × 175 × 32 mm / 1.8 × 6.9 × 1.3 inch

• Weight: 0.200 kg / 0.441 lbs

• Cable length: 2.5 m / 8.2 ft

Design and ﬁnishing

• Material: antimicrobial surface

• Color(s): dark grey pearl metallic

Accessories

• USB cable

• CD-ROM containing software and user

manual

• Hanging bracket

• Quick start guide

6 Technical data

Connectivity

• USB: Mini-USB 2.0

Audio recording

• Microphone type: electret condenser

microphone

• Microphone cartridge: 10 mm

• Characteristic: uni-directional

• Frequency response: 200 – 12 000 Hz

• Sensitivity: -37 dBV @ 1 kHz

• Signal-to-noise ratio: > 70 dBA

Sound

• Speaker type: built-in round, dynamic speaker

• Speaker diameter: 30 mm

• Acoustic frequency response: 300 – 7500 Hz

• Speaker output power: > 200 mW

System requirements

• Processor: Intel Pentium 4, 1.0 GHz or

equivalent processor

• RAM memory: 1 GB (2 GB recommended)

• Hard disk space: 10 MB for Speech Control,

100 MB for SpeechExec (optional), 250 MB

for Microsoft .NET Framework

• Operating system: Windows 8/7/Vista, Mac

OS 10.8/10.9

• Free USB port

• CD-ROM drive

Green speciﬁcations

• Compliant to 2011/65/EU (RoHS)

• Lead-free soldered product

15User manual

The SpeechMike is connected to the

computer but sound will play on the

computer’s speaker only

Windows XP can support only one

playback device at a time and may require

setting the playback device back to

“SpeechMike” if another playback device

was enabled after the SpeechMike was

installed.

• Set via Start > Control Panel > Sound and

Audio Devices > Audio (tab)

• Or, right-click the speaker icon if it’s in the

toolbar and select Adjust Audio Properties

Windows Vista and Windows 7 can

support more than one playback device

at a time, but if you disable the device for

playback it is also disabled for recording.

You may need to right-click and select

“Show disabled devices” to change the

setting.

• Set via Start > Control Panel > Sound >

Playback (tab)

• Or, right-click the speaker icon if it’s in your

toolbar and select playback devices

7 Frequently asked questions

The operating system stops responding

after restart

Using the Philips SpeechMike together

with certain USB hubs may cause the

operating system to stop responding

when the computer is started.

Unplug the SpeechMike before starting the PC

and reconnect it afterwards. We recommend

replacing the USB hub or connecting your

SpeechMike directly to the USB port of the

computer.

The SpeechMike is completely without

function

Some computer providers limit the

output power of USB ports to 100mA.

These ports may not provide enough

power for the SpeechMike to function

properly.

Connect the SpeechMike via a self-powered hub.

ENGLISH

16 User manual

17Benutzerhandbuch

Benutzerhandbuch

1 Wichtig 18

2 Ihr SpeechMike 20

2.1 Verpackungsinhalt 20

2.2 Übersicht 21

3 Erste Schritte 22

3.1 Installieren der Software 22

4 Verwenden des SpeechMike 23

4.1 Aufnehmen 23

5 Optimale Nutzung des

SpeechMike 24

5.1 Anpassen des SpeechMike 24

5.1.1 Anpassen von Tasten und Einstellungen

des SpeechMike 24

5.1.2 Verwenden von

Programmkurzbefehlen 25

5.1.3 Den Bewegungssensor verwenden 27

5.2 Aktualisieren der Firmware 27

6 Technische Daten 28

7 Häuﬁg gestellte Fragen 29

DEUTSCH

18 Benutzerhandbuch

verwendet werden, als ungefährlich betrachtet.

Die folgende Erklärung ist nach den US- und

internationalen Regelwerken obligatorisch:

A Vorsicht

Nicht versuchen, das Gerät zu önen. Die

Reparatur des Geräts darf nur durch einen

zugelassenen Servicetechniker erfolgen.

Werden die Steuerelemente, Einstellungen oder

Vorgehensweisen nicht in Übereinstimmung mit

den hier gegebenen Anweisungen verwendet,

kann gefährliche Exposition mit Laserlicht

auftreten.

Kleinkinder

Gerät und Zubehör können Kleinteile enthalten,

die nicht in Kinderhände geraten dürfen.

Elektromagnetische Verträglichkeit

Koninklijke Philips Electronics N.V. produziert

und vertreibt zahlreiche Endprodukte, die wie

alle elektronischen Geräte im Allgemeinen

elektromagnetische Signale empfangen und

aussenden können. Eines der wichtigsten

Unternehmensprinzipien von Philips ist es, für

seine Produkte alle notwendigen Gesundheits-

und Sicherheitsmaßnahmen zu ergreifen, um

allen anwendbaren rechtlichen Anforderungen

zu entsprechen und die zum Zeitpunkt der

Herstellung des Produkts anwendbaren EMV-

Normen in vollem Maße einzuhalten. Philips

hat es sich zur Aufgabe gemacht, Produkte zu

entwickeln, herzustellen und zu vertreiben, die

nicht gesundheitsschädigend sind. Philips liegen

aktuelle wissenschaftliche Nachweise vor, die

bestätigen, dass seine Produkte bei ordnungs-

und sachgemäßem Gebrauch sicher sind.

Philips beteiligt sich aktiv an der Entwicklung

internationaler EMV- und Sicherheitsstandards

und kann dadurch zu einem frühen Zeitpunkt

seine Produkte den neuen Standards anpassen.

1 Wichtig

Der Hersteller behält sich das Recht vor,

Produkte jederzeit zu ändern, ohne die

Verpﬂichtung, frühere Produkte entsprechend

anzupassen.

Die Informationen in diesem Handbuch werden

für den bestimmungsgemäßen Gebrauch des

Systems als angemessen erachtet. Wenn das

Produkt oder einzelne Module oder Verfahren

für andere als die hier angegebenen Zwecke

verwendet werden, ist eine Bestätigung für

deren Zulässigkeit und Eignung einzuholen.

Sicherheit

• Schützen Sie das Gerät vor Regen oder

Wasser, um einen Kurzschluss zu vermeiden.

• Setzen Sie das Gerät keiner durch Heizgeräte

oder direkte Sonneneinstrahlung verursachten

starken Hitze aus.

• Achten Sie darauf, dass Kabel nicht

gequetscht werden, vor allem am Stecker und

am Geräteausgang.

• Sichern Sie Ihre Dateien. Philips haftet nicht

für den Verlust von Daten.

SpeechMike Barcode

B Laserprodukt der Klasse 1

Dieses Produkt entspricht:

• 21CFR1040.10 und 1040.11 außer

Abweichungen gemäß Laser Notice No. 50,

vom 26. Juli 2001.

• EN60825-1:1994 + A1:2002 + A2:2001

• IEC60825-1:1993 + A1:1997 + A2:2001

Die Laser-Klasse steht neben dem Scanner-

Fenster auf dem Produkt.

Lasergeräte der Klasse 1 werden, wenn

sie ihrer Zweckbestimmung entsprechend

19Benutzerhandbuch

Reinigung und Desinfektion

• Trennen Sie das Gerät vor der Reinigung vom

Computer.

• Verwenden Sie zur Reinigung ein weiches

Tuch, wenn nötig angefeuchtet mit einer

geringen Menge Wasser oder verdünnter,

milder Seife.

• Produkte für die Flächendesinfektion

in klinischen Umgebungen und für

medinizinsche Ausrüstung, wie beispielsweise

Desinfektionstücher, können für die Reinigung

des Geräts verwendet werden.

• Verwenden Sie keine aggressiven Chemikalien

oder starke Reinigungsmittel.

• Vermeiden Sie es die Oberﬂäche mit harten

Materialen zu scheuern oder zu bearbeiten, da

dies Kratzer verursachen und die Oberﬂäche

dauerhaft beschädigen kann.

Entsorgung des alten Geräts

• Zur Herstellung des Geräts wurden

hochwertige Materialien und Komponenten

verwendet, die recycelt und wiederverwertet

werden können.

• Das durchgestrichene

Mülleimersymbol weist darauf hin,

dass das Gerät die Anforderungen

der europäischen Richtlinie 2002/96/EC

erfüllt.

• Informieren Sie sich über das lokale

Mülltrennungssystem für elektrische und

elektronische Geräte.

• Halten Sie sich an die jeweils geltenden

gesetzlichen Vorschriften, und entsorgen

Sie alte Geräte nicht mit dem normalen

Hausmüll. Durch die fachgerechte Entsorgung

alter Geräte werden schädliche Auswirkungen

auf Umwelt und Gesundheit vermieden.

• Batterien (wie auch eingebaute

wiederauﬂadbare Batterien) enthalten

umweltschädliche Substanzen. Sie müssen

daher an oziellen Sammelstellen abgegeben

werden.

DEUTSCH

20 Benutzerhandbuch

2 Ihr SpeechMike

Wir freuen uns, dass Sie sich für ein Philips-

Gerät entschieden haben.

Auf unserer Webseite erhalten Sie

umfassende Unterstützung in Form von

Benutzerhandbüchern, Softwaredownloads,

Garantieinformationen und vielem mehr:

www.philips.com/dictation.

2.1 Verpackungsinhalt

Diktiermikrofon

Kurzanleitung

CD-ROM mit Software und

Benutzerhandbuch

USB-Kabel

For product information and support, visit

www.philips.com/dictation

LFH3510

LFH3610

with integrated

bar code scanner

SPEECHMIKE PREMIUM

EN Quick start guide

DE Kurzanleitung

FR Guide de démarrage rapide

ES Guía de inicio rápido

IT Guida rapida di introduzione

NL Snelle startgids

SV Snabbstartsguide

Halterung

La page charge ...

Philips SpeechMike LFH 3520 Manuel utilisateur

Ce manuel convient également à

Philips SpeechMike LFH 3520 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents