Omcan SB-CN-0025 Manuel utilisateur
- Catégorie
- Trancheuses
- Taper
- Manuel utilisateur
Revised - 04/23/2021
Toll Free: 1-800-465-0234
Fax: 905-607-0234
Email: [email protected]
www.omcan.com
Bread Slicers
Models SB-CN-0025, 0013, 0019, 0016, 0011
Items 44246, 44247, 44248, 44249, 44250
Instruction Manual
2
Page
--------------------------------------------------------------------------- 3 - 4
--------------------------------------------------------------------------- 4 - 5
-------------------------------------------------------------------------- 6
-------------------------------------------------------------------------------------------- 6
--------------------------------------------------------------------------------------------- 6
------------------------------------------------------------------------------------ 6 - 7
------------------------------------------------------------------------------------- 7
----------------------------------------------------------------------------- 8 - 13
---------------------------------------------------------------------------- 14
---------------------------------------------------------------------------- 15
Table of Contents
Section
General Information
Safety and Warranty
Technical Specications
Installation
Operation
Maintenance
Troubleshooting
Parts Breakdown
Electrical Schematics
Warranty Registration
Model SB-CN-0025 / Model SB-CN-0013 / Model SB-CN-0019
Model SB-CN-0016 / Model SB-CN-0011
3
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.
4
Safety and Warranty
General Information
DANGER
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS
For your safety, this equipment has been veried by qualied technicians and carefully crated before shipment.
The freight company takes full responsibility for the delivery of this equipment in good condition, by accepting
to deliver it.
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.
5
Safety and Warranty
• The manufacturer suggests to read this manual carefully.
• The bread slicer is manufactured with rst quality materials by experienced technicians. Normal use and
adequate maintenance will guarantee a reliable service for years to come.
• The bread slicer is available in four different slice thickness (1/2, 5/8, 3/4 and 1 inch).
• A nameplate xed to the left side of the slicer species the serial number, model number, amperage,
voltage and frequency.
• Drawings, electrical diagrams and replacement part numbers are included in this manual
BEFORE USING THE BREAD SLICER, VERIFY THAT NOTHING OBSTRUCTS THE CHUTE BLADE AND
TIGHTEN THE GUIDE ADJUSTMENT.
1 YEAR PARTS AND LABOR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components (cardboard, polyethylene, and others) are classied as normal solid urban waste
and can therefore be disposed of without difculty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
6
Maintenance
We recommend cleaning the slicer every day to prevent accumulation of bread pieces. Use a small vacuum to
clean the bread crumbs.
Operation
1. Make sure there are no obstructions in the chute.
2. Adjust the side and top guide a 1/2 inch from each side of the bread and a 1/2 inch from the top.
3. Use only cold bread in the slicer.
4. Start the slicer with the main switch on the left side.
5. Put the bread in the chute and by using the wood bread pusher exert pressure on the bread. When the
bread comes out, remove it and put it on the bread bagger on the top of the slicer. Take a bag and insert
over the bagger and the bread; then remove them and close the bag.
WARNING: NEVER TRY TO PUSH OR PULL OUT THE BREAD WITH YOUR HANDS WHEN THE SLICER
IS ON. ALWAYS DISCONNECT THE ELECTRIC CORD OR MAIN POWER BREAKER.
Installation
Open the crate and remove all materials used for packing as well as the accessories. Put the slicer on a stable
table or counter and make sure the slicer is level. Each unit is set up to be used with the electrical supply
specied on the nameplate xed on the left side of the slicer.
Technical Specications
Model SB-CN-0025 SB-CN-0013 SB-CN-0019 SB-CN-0016 SB-CN-0011
Power 0.25 HP / 0.18 kW
Size 1” / 25mm 1/2” / 13mm 3/4” / 19mm 5/8” / 16mm 7/16” / 11mm
Electrical 110V/60/1
Weight 176 lbs. / 79.8 kgs.
Packaging
Weight 220 lbs. / 99.8 kgs.
Dimensions 27” x 23.7” x 26.9” / 686 x 602 x 683mm
Packaging
Dimensions 47” x 36” x 41” / 1194 x 914 x 1041mm
Item Number 44246 44247 44248 44249 44250
7
Troubleshooting
Maintenance
CHANGING BLADES
TO REMOVE THE BLADES
1. Remove the top cover and the guide.
2. Remove the exit chute.
3. Remove the support angle on each side of the chute (10mm key).
4. Unscrew bolt.
5. Unscrew the bottom bolt on the blade frame.
6. Turn the frame cam wheel with the v belt.
7. Use the special tool to remove the blades one by one.
Tool sold separately, Item number 78617.
TO INSTALL THE NEW BLADES
1. Use the special tool to install the blades one by one.
2. Install the blade frame tighten the bottom bolt and make sure the frames are aligned.
3. Install the angle support on each side of the chute (10mm key).
4. Install the exit chute.
5. Install the top cover and the guide.
Always cut off the main power before replacing any parts.
Problems Solutions
The slicer does not turn on when
powered.
Check if the electric cord is connected.
Check the breaker of the building.
Check the breaker on the side of the slicer.
If the slicer is still not working, call a technician or us.
The slicer does not slice properly. Make sure the bread is not hot.
Check if the blade is clean.
Check the guide adjustment.
If the slicer still does not slice properly, change the blade.
8
Parts Breakdown
Model SB-CN-0025 44246
Model SB-CN-0013 44247
Model SB-CN-0019 44248
Model SB-CN-0016 44249
Model SB-CN-0011 44250
9
Parts Breakdown
Item No. Description Position Item No. Description Position Item No. Description Position
63586 Right Wall for 44246 1 63610 Lower Fixed Plate (Right) for 44246 25 63634 Screw M8x16 for 44246 49
63587 Nut M10 for 44246 2 63611 Frame Fixed Rod for 44246 26 63635 Washer Ø8 for 44246 50
63588 Handle for 44246 3 63612 Bearing 6204 for 44246 27 63636 Nut M8 for 44246 51
63589 Control Panel for 44246 4 63613 Plastic Base (Right) for 44246 28 63635 Washer Ø8 for 44246 52
63590 Power Switch for 44246 5 63614 Blade Frame Fixed Ring for 44246 29 63635 Washer Ø8 for 44246 53
63591 Plastic Handle for 44246 6 63615 Blade Frame Fixed Rod for 44246 30 63639 Screw M8x25 for 44246 54
63592 Screw M8x20 for 44246 7 63616 Blade Frame Fixed Rod for 44246 31 63640 Pulley Shaft for 44246 55
63593 Blade Frame Activity Lever for 44246 8 63617 Plastic Base (Left) for 44246 32 63641 Belt for 44246 56
63594 Upper Blade Frame for 44246 9 63618 Washer for 44246 33 63634 Screw M8x16 for 44246 57
63595 Spring for 44246 10 63619 Plastic Bearing Connecting Rod for 44246 34 63643 Motor Pulley Shaft for 44246 58
63596 Blade Frame Retainer for 44246 11 63620 Transmission Fixed Shaft for 44246 35 63644 Nut M22 for 44246 59
14836 Blade for 44246 12 63621 Left Wall for 44246 36 63645 Front Cover for 44246 60
63598 Blade Dowel for 44246 13 63622 Acrylic Board for 44246 37 63646 Upper Cover for 44246 61
63599 Screw M6x16 for 44246 14 63623 Lower Fixed Plate (Left) for 44246 38 63606 Screw M6x12 for 44246 62
63600 Fixed Rod for 44246 15 63624 Sliding Shaft for 44246 39 63648 Fixed Angle Iron for 44246 63
63601 Platen for 44246 16 63625 Screw M5x6 for 44246 40 63649 Fixed Angle Iron for 44246 64
63602 Fixed Rod for 44246 17 63626 Soft Hat M6 for 44246 41 63650 Fixed Angle Iron for 44246 65
63603 Upper Rod for 44246 18 63627 Screw M6x30 for 44246 42 63651 Sloping Plate Retainer for 44246 66
63604 Permanent Seat for 44246 19 63628 Plastic Base Attachment for 44246 43 63652 Tray Bar for 44246 67
63605 Lower Blade Frame for 44246 20 63629 Motor Support (Back) for 44246 44 63653 Sloping Plate for 44246 68
63606 Screw M6x12 for 44246 21 63630 Motor Support (Front) for 44246 45 63654 Width Fixing Plate for 44246 69
63607 Holder for 44246 22 63631 Nut M20 for 44246 46 63655 Width Fixing Plate for 44246 70
63608 Holder Cover for 44246 23 63632 Screw Ø49 for 44246 47 20860 Plastic Lock Bolt of Guides for 44246
63609 Motor for 44246 24 63633 Pulley for 44246 48
Model SB-CN-0025 44246
10
Parts Breakdown
Item No. Description Position Item No. Description Position Item No. Description Position
63586 Right Wall for 44247 1 63610 Lower Fixed Plate (Right) for 44247 25 63634 Screw M8x16 for 44247 49
63587 Nut M10 for 44247 2 63611 Frame Fixed Rod for 44247 26 63635 Washer Ø8 for 44247 50
63588 Handle for 44247 3 63612 Bearing 6204 for 44247 27 63636 Nut M8 for 44247 51
63589 Control Panel for 44247 4 63613 Plastic Base (Right) for 44247 28 63635 Washer Ø8 for 44247 52
63590 Power Switch for 44247 5 63614 Blade Frame Fixed Ring for 44247 29 63635 Washer Ø8 for 44247 53
63591 Plastic Handle for 44247 6 63615 Blade Frame Fixed Rod for 44247 30 63639 Screw M8x25 for 44247 54
63592 Screw M8x20 for 44247 7 63616 Blade Frame Fixed Rod for 44247 31 63640 Pulley Shaft for 44247 55
63593 Blade Frame Activity Lever for 44247 8 63617 Plastic Base (Left) for 44247 32 63641 Belt for 44247 56
64297 Upper Blade Frame for 44247 9 63618 Washer for 44247 33 63634 Screw M8x16 for 44247 57
63595 Spring for 44247 10 63619 Plastic Bearing Connecting Rod for 44247 34 63643 Motor Pulley Shaft for 44247 58
63596 Blade Frame Retainer for 44247 11 63620 Transmission Fixed Shaft for 44247 35 63644 Nut M22 for 44247 59
14836 Blade for 44247 12 63621 Left Wall for 44247 36 63645 Front Cover for 44247 60
63598 Blade Dowel for 44247 13 63622 Acrylic Board for 44247 37 63646 Upper Cover for 44247 61
63599 Screw M6x16 for 44247 14 63623 Lower Fixed Plate (Left) for 44247 38 63606 Screw M6x12 for 44247 62
63600 Fixed Rod for 44247 15 63624 Sliding Shaft for 44247 39 63648 Fixed Angle Iron for 44247 63
64298 Platen for 44247 16 63625 Screw M5x6 for 44247 40 63649 Fixed Angle Iron for 44247 64
63602 Fixed Rod for 44247 17 63626 Soft Hat M6 for 44247 41 63650 Fixed Angle Iron for 44247 65
63603 Upper Rod for 44247 18 63627 Screw M6x30 for 44247 42 63651 Sloping Plate Retainer for 44247 66
63604 Permanent Seat for 44247 19 63628 Plastic Base Attachment for 44247 43 64300 Tray Bar for 44247 67
64299 Lower Blade Frame for 44247 20 63629 Motor Support (Back) for 44247 44 63653 Sloping Plate for 44247 68
63606 Screw M6x12 for 44247 21 63630 Motor Support (Front) for 44247 45 63654 Width Fixing Plate for 44247 69
63607 Holder for 44247 22 63631 Nut M20 for 44247 46 63655 Width Fixing Plate for 44247 70
63608 Holder Cover for 44247 23 63632 Screw Ø49 for 44247 47 20860 Plastic Lock Bolt of Guides for 44247
63609 Motor for 44247 24 63633 Pulley for 44247 48
Model SB-CN-0013 44247
11
Parts Breakdown
Item No. Description Position Item No. Description Position Item No. Description Position
63586 Right Wall for 44248 1 63610 Lower Fixed Plate (Right) for 44248 25 63634 Screw M8x16 for 44248 49
63587 Nut M10 for 44248 2 63611 Frame Fixed Rod for 44248 26 63635 Washer Ø8 for 44248 50
63588 Handle for 44248 3 63612 Bearing 6204 for 44248 27 63636 Nut M8 for 44248 51
63589 Control Panel for 44248 4 63613 Plastic Base (Right) for 44248 28 63635 Washer Ø8 for 44248 52
63590 Power Switch for 44248 5 63614 Blade Frame Fixed Ring for 44248 29 63635 Washer Ø8 for 44248 53
63591 Plastic Handle for 44248 6 63615 Blade Frame Fixed Rod for 44248 30 63639 Screw M8x25 for 44248 54
63592 Screw M8x20 for 44248 7 63616 Blade Frame Fixed Rod for 44248 31 63640 Pulley Shaft for 44248 55
63593 Blade Frame Activity Lever for 44248 8 63617 Plastic Base (Left) for 44248 32 63641 Belt for 44248 56
64301 Upper Blade Frame for 44248 9 63618 Washer for 44248 33 63634 Screw M8x16 for 44248 57
63595 Spring for 44248 10 63619 Plastic Bearing Connecting Rod for 44248 34 63643 Motor Pulley Shaft for 44248 58
63596 Blade Frame Retainer for 44248 11 63620 Transmission Fixed Shaft for 44248 35 63644 Nut M22 for 44248 59
14836 Blade for 44248 12 63621 Left Wall for 44248 36 63645 Front Cover for 44248 60
63598 Blade Dowel for 44248 13 63622 Acrylic Board for 44248 37 63646 Upper Cover for 44248 61
63599 Screw M6x16 for 44248 14 63623 Lower Fixed Plate (Left) for 44248 38 63606 Screw M6x12 for 44248 62
63600 Fixed Rod for 44248 15 63624 Sliding Shaft for 44248 39 63648 Fixed Angle Iron for 44248 63
64302 Platen for 44248 16 63625 Screw M5x6 for 44248 40 63649 Fixed Angle Iron for 44248 64
63602 Fixed Rod for 44248 17 63626 Soft Hat M6 for 44248 41 63650 Fixed Angle Iron for 44248 65
63603 Upper Rod for 44248 18 63627 Screw M6x30 for 44248 42 63651 Sloping Plate Retainer for 44248 66
63604 Permanent Seat for 44248 19 63628 Plastic Base Attachment for 44248 43 64304 Tray Bar for 44248 67
64303 Lower Blade Frame for 44248 20 63629 Motor Support (Back) for 44248 44 63653 Sloping Plate for 44248 68
63606 Screw M6x12 for 44248 21 63630 Motor Support (Front) for 44248 45 63654 Width Fixing Plate for 44248 69
63607 Holder for 44248 22 63631 Nut M20 for 44248 46 63655 Width Fixing Plate for 44248 70
63608 Holder Cover for 44248 23 63632 Screw Ø49 for 44248 47 20860 Plastic Lock Bolt of Guides for 44248
63609 Motor for 44248 24 63633 Pulley for 44248 48
Model SB-CN-0019 44248
12
Parts Breakdown
Item No. Description Position Item No. Description Position Item No. Description Position
63586 Right Wall for 44249 1 63610 Lower Fixed Plate (Right) for 44249 25 63634 Screw M8x16 for 44249 49
63587 Nut M10 for 44249 2 63611 Frame Fixed Rod for 44249 26 63635 Washer Ø8 for 44249 50
63588 Handle for 44249 3 63612 Bearing 6204 for 44249 27 63636 Nut M8 for 44249 51
63589 Control Panel for 44249 4 63613 Plastic Base (Right) for 44249 28 63635 Washer Ø8 for 44249 52
63590 Power Switch for 44249 5 63614 Blade Frame Fixed Ring for 44249 29 63635 Washer Ø8 for 44249 53
63591 Plastic Handle for 44249 6 63615 Blade Frame Fixed Rod for 44249 30 63639 Screw M8x25 for 44249 54
63592 Screw M8x20 for 44249 7 63616 Blade Frame Fixed Rod for 44249 31 63640 Pulley Shaft for 44249 55
63593 Blade Frame Activity Lever for 44249 8 63617 Plastic Base (Left) for 44249 32 63641 Belt for 44249 56
64305 Upper Blade Frame for 44249 9 63618 Washer for 44249 33 63634 Screw M8x16 for 44249 57
63595 Spring for 44249 10 63619 Plastic Bearing Connecting Rod for 44249 34 63643 Motor Pulley Shaft for 44249 58
63596 Blade Frame Retainer for 44249 11 63620 Transmission Fixed Shaft for 44249 35 63644 Nut M22 for 44249 59
14836 Blade for 44249 12 63621 Left Wall for 44249 36 63645 Front Cover for 44249 60
63598 Blade Dowel for 44249 13 63622 Acrylic Board for 44249 37 63646 Upper Cover for 44249 61
63599 Screw M6x16 for 44249 14 63623 Lower Fixed Plate (Left) for 44249 38 63606 Screw M6x12 for 44249 62
63600 Fixed Rod for 44249 15 63624 Sliding Shaft for 44249 39 63648 Fixed Angle Iron for 44249 63
64306 Platen for 44249 16 63625 Screw M5x6 for 44249 40 63649 Fixed Angle Iron for 44249 64
63602 Fixed Rod for 44249 17 63626 Soft Hat M6 for 44249 41 63650 Fixed Angle Iron for 44249 65
63603 Upper Rod for 44249 18 63627 Screw M6x30 for 44249 42 63651 Sloping Plate Retainer for 44249 66
63604 Permanent Seat for 44249 19 63628 Plastic Base Attachment for 44249 43 64308 Tray Bar for 44249 67
64307 Lower Blade Frame for 44249 20 63629 Motor Support (Back) for 44249 44 63653 Sloping Plate for 44249 68
63606 Screw M6x12 for 44249 21 63630 Motor Support (Front) for 44249 45 63654 Width Fixing Plate for 44249 69
63607 Holder for 44249 22 63631 Nut M20 for 44249 46 63655 Width Fixing Plate for 44249 70
63608 Holder Cover for 44249 23 63632 Screw Ø49 for 44249 47 20860 Plastic Lock Bolt of Guides for 44249
63609 Motor for 44249 24 63633 Pulley for 44249 48
Model SB-CN-0016 44249
13
Parts Breakdown
Item No. Description Position Item No. Description Position Item No. Description Position
63586 Right Wall for 44250 1 63610 Lower Fixed Plate (Right) for 44250 25 63634 Screw M8x16 for 44250 49
63587 Nut M10 for 44250 2 63611 Frame Fixed Rod for 44250 26 63635 Washer Ø8 for 44250 50
63588 Handle for 44250 3 63612 Bearing 6204 for 44250 27 63636 Nut M8 for 44250 51
63589 Control Panel for 44250 4 63613 Plastic Base (Right) for 44250 28 63635 Washer Ø8 for 44250 52
63590 Power Switch for 44250 5 63614 Blade Frame Fixed Ring for 44250 29 63635 Washer Ø8 for 44250 53
63591 Plastic Handle for 44250 6 63615 Blade Frame Fixed Rod for 44250 30 63639 Screw M8x25 for 44250 54
63592 Screw M8x20 for 44250 7 63616 Blade Frame Fixed Rod for 44250 31 63640 Pulley Shaft for 44250 55
63593 Blade Frame Activity Lever for 44250 8 63617 Plastic Base (Left) for 44250 32 63641 Belt for 44250 56
64309 Upper Blade Frame for 44250 9 63618 Washer for 44250 33 63634 Screw M8x16 for 44250 57
63595 Spring for 44250 10 63619 Plastic Bearing Connecting Rod for 44250 34 63643 Motor Pulley Shaft for 44250 58
63596 Blade Frame Retainer for 44250 11 63620 Transmission Fixed Shaft for 44250 35 63644 Nut M22 for 44250 59
14836 Blade for 44250 12 63621 Left Wall for 44250 36 63645 Front Cover for 44250 60
63598 Blade Dowel for 44250 13 63622 Acrylic Board for 44250 37 63646 Upper Cover for 44250 61
63599 Screw M6x16 for 44250 14 63623 Lower Fixed Plate (Left) for 44250 38 63606 Screw M6x12 for 44250 62
63600 Fixed Rod for 44250 15 63624 Sliding Shaft for 44250 39 63648 Fixed Angle Iron for 44250 63
64310 Platen for 44250 16 63625 Screw M5x6 for 44250 40 63649 Fixed Angle Iron for 44250 64
63602 Fixed Rod for 44250 17 63626 Soft Hat M6 for 44250 41 63650 Fixed Angle Iron for 44250 65
63603 Upper Rod for 44250 18 63627 Screw M6x30 for 44250 42 63651 Sloping Plate Retainer for 44250 66
63604 Permanent Seat for 44250 19 63628 Plastic Base Attachment for 44250 43 64312 Tray Bar for 44250 67
64311 Lower Blade Frame for 44250 20 63629 Motor Support (Back) for 44250 44 63653 Sloping Plate for 44250 68
63606 Screw M6x12 for 44250 21 63630 Motor Support (Front) for 44250 45 63654 Width Fixing Plate for 44250 69
63607 Holder for 44250 22 63631 Nut M20 for 44250 46 63655 Width Fixing Plate for 44250 70
63608 Holder Cover for 44250 23 63632 Screw Ø49 for 44250 47 20860 Plastic Lock Bolt of Guides for 44250
63609 Motor for 44250 24 63633 Pulley for 44250 48
Model SB-CN-0011 44250
14
Electrical Schematics
Model SB-CN-0025 44246
Model SB-CN-0013 44247
Model SB-CN-0019 44248
Model SB-CN-0016 44249
Model SB-CN-0011 44250
15
Warranty Registration
Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,
cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:
Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la
carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at
the perforation and then send to the address specied below. You can also register online by visiting:
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5
https://omcan.com/warranty-registration/
or email to: [email protected]
Purchaser’s Information
Name: Company Name:
Address:
Telephone:
City: Province or State: Postal or Zip: Email Address:
Country: Type of Company:
Restaurant Bakery Deli
Dealer from which Purchased: Butcher Supermarket Caterer
Dealer City: Dealer Province or State: Institution (specify):
Invoice: Other (specify):
Model Name: Model Number: Serial Number:
Machine Description:
Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):
Would you like to extend the warranty? Yes No
Por correo en Canadá
Pour postale au Canada
For mailing in Canada
Por correo en los EE.UU.
Pour diffusion aux États-Unis
For mailing in the US
OMCAN
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
USA, 14305
Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North
American food service industry. Our success over these many years can be attributed to our commitment
to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Today with partners in North America, Europe, Asia and South America, we continually work to improve
and grow the company. We strive to offer customers exceptional value through our qualied local sales
and service representatives who provide convenient access to over 5,000 globally sourced products.
Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et
matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces
nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles
et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en
Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et
développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à
nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 5000
produits provenant du monde entier.
Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros
de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir
a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos
clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan
continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor
excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un
fácil acceso a más de 5,000 productos con origen a nivel mundial.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Omcan SB-CN-0025 Manuel utilisateur
- Catégorie
- Trancheuses
- Taper
- Manuel utilisateur
dans d''autres langues
- English: Omcan SB-CN-0025 User manual
