MATTEO C69201 Manuel utilisateur

INSTALLATION INSTRUCTIONS SHEET

C69201

Please Note:START FROM HERE

▪

Make sure power is completely off at the fuse box.

Have your fixture installed by a qualified licensed

electrician

Prepare everything in clear area.

Wear gloves at all times during this installation.

Read instructions carefully before you start assembly.

Keep this instruction sheet for future reference.

Technical Support:1-844-628-8368

• All Matteo Lighting fixtures come with pre-wired module(s).

• Unless instructed to do so, please do not touch any part of the module(s) as any

unnecessary contact with the module could cause permanent damage.

THIS LUMINAIRE MUST BE MOUNTED OR SUPPORTED IN A JUNCTION BOX

CE LUMINAIRE DOIT ÊTRE MONTÉ OU SUPPORTÉ DANS UNE BOÎTE

DE JONCTION

www.matteolighting.com

Toll Free. 1.844.628.8368 E. [email protected]

Ensure main supply is switched o.

Connect wires according to color (White to White,

Black to Black). Connect all earth plug together onto the

Reconnect power.

Install blub(9) ﬁrmly into lampholders (bulbs not provided).

Clear wires, push the canopy(7) to the ceiling, lock the ring(8)

to the ceiling.