INSTALLATION INSTRUCTIONS SHEET
Please Note:
•All Matteo Lighting fixtures come with pre-wired module(s).
•Unless instructed to do so, please do not touch any part of the module(s) as any
unnecessary contact with the module could cause permanentdamage.
THIS LUMINAIRE MUST BE MOUNTED OR SUPPORTED IN A JUNCTION BOX
CE LUMINAIRE DOIT ÊTRE MONTÉ OU SUPPORTÉ DANS UNE BOÎTE
DE JONCTION
START FROM HERE
▪Make sure power is completely off at the fuse box.
▪Have your fixture installed by a qualified
licensed electrician
▪Prepare everything in clear area.
▪Wear gloves at all times during this installation.
▪Read instructions carefully before you start assembly.
▪Keep this instruction sheet for future reference.
Technical Support:1-844-628-8368
www.matteolighting.com
Toll Free. 1.844.628.8368 E. info@matteolighting.com
House
white
Fixture
white
Fixture
black
House
black
House
ground
1
2
3
4
5
6
7
Ensure main supply is switched off.
Connect all tubes together.
Fit mounng bracket onto mounng surface with
self-tapping screws.
Connect wires according to color (White to White,
Black to Black). Connect all earth plug together onto the
crossbar with green screw to ght.
Fit ceiling plate onto mounng bracket with screws.
Install lamps firmly into lampholders.
Fix the glass
8Reconnect power.