Miele Triflex HX1 Cat & Dog Mode d'emploi

Catégorie
Aspirateurs
Taper
Mode d'emploi

Ce manuel convient également à

en
es
fr
Operating Instructions
Cordless Stick Vacuum Cleaner
Instrucciones de funcionamiento
Aspiradora vertical in-alámbrica
Mode d’emploi
Aspirateur-balai sans fil
M.-Nr. 11 456 520
HS19
en - Contents
2
IMPORTANT SAFETY INSTRUCTIONS ............................................................ 4
Safety instructions and warnings for AP01battery, LG01charger,
LS03charger cradle (depending on the model) .................................................. 10
Appliance description ....................................................................................... 14
Caring for the environment .............................................................................. 16
References to illustrations................................................................................ 17
Installation and connection .............................................................................. 17
Assembling the vacuum cleaner ........................................................................ 17
Using the PowerUnit solo.................................................................................... 17
Connecting the Comfort handle ......................................................................... 17
Connecting the PowerUnit and the suction wand .............................................. 17
Inserting the battery ........................................................................................... 18
Connecting the Electrobrush .............................................................................. 18
General battery information................................................................................. 18
Charging the battery (without wall mounting) ..................................................... 18
Charging the battery (with wall mounting) .......................................................... 19
Wall mounting ..................................................................................................... 19
Battery charging state indicator (while charging) ............................................... 20
Battery charging state indicator (while in use) .................................................... 20
Using the accessories supplied ...................................................................... 20
Multi Floor XXL Electrobrush .............................................................................. 21
ElectroCompacthandheldbrush (HXSEB) ....................................................... 21
Additional battery and charger cradle ................................................................ 21
Use...................................................................................................................... 22
Switching on and off .......................................................................................... 22
Regulating the suction power ............................................................................. 22
Illuminating the work area ................................................................................... 22
Self-standing function for short pauses in vacuuming........................................ 22
Maintenance ...................................................................................................... 23
Emptying the dust container .............................................................................. 23
Cleaning the fine dust filter ................................................................................. 23
Cleaning the pre-filter ......................................................................................... 24
Cleaning the dust container ................................................................................ 24
Cleaning the Electrobrush/handheld brush ........................................................ 24
Replacing the rechargeable battery .................................................................... 25
Frequently Asked Questions ............................................................................ 26
en - Contents
3
Fault messages.................................................................................................. 28
Cleaning and care ............................................................................................. 29
Customer Service.............................................................................................. 29
Contact in case of fault ....................................................................................... 29
Warranty .............................................................................................................. 29
Optional accessories ........................................................................................ 29
LIMITED WARRANTY - VACUUM CLEANERS USA........................................ 31
en - IMPORTANT SAFETY INSTRUCTIONS
4
This vacuum cleaner complies with all current local and
national safety requirements. Improper use can lead to
personal injury and damage to property.
Please read the operating instructions before using the
vacuum cleaner for the first time. They contain important
information on the safety, use, and maintenance of the
vacuum cleaner. This prevents both personal injury and
damage to the appliance.
Miele expressly and strongly advises that you read and
follow the instructions in the “Installation and connec-
tion” chapter as well as the IMPORTANT SAFETY IN-
STRUCTIONS.
Miele cannot be held liable for injury or damage caused
by non-compliance with these instructions.
Keep these operating instructions in a safe place and
pass them on to any future user.
Always disconnect the vacuum cleaner from the power
supply when you have finished using it, before changing
any accessories, as well as for maintenance work, clean-
ing, and troubleshooting. Use the On/Off switch on the
Comfort handle to do this.
Correct use
This vacuum cleaner is intended for cleaning flooring in
domestic households and similar residential environments.
This vacuum cleaner is not suitable for use on construction
sites.
This vacuum cleaner is not intended for outdoor use.
en - IMPORTANT SAFETY INSTRUCTIONS
5
This vacuum cleaner can be used for all normal cleaning
of carpets, rugs and hard flooring.
This vacuum cleaner is intended for use at altitudes of
up to 13,000ft (4000m) above sea level.
The vacuum cleaner must only be used to vacuum dry
floor surfaces. Do not vacuum people or animals. Any
other types of use, modifications, or alterations are not
permitted.
People with reduced physical, sensory, or mental capa-
bilities, or lack of experience or knowledge, who are un-
able to use the vacuum cleaner safely, may only use the
vacuum cleaner if they are supervised while using it or
have been shown how to use it in a safe way and under-
stand and recognize the consequences of incorrect opera-
tion.
Use only as described in this manual.
Use only manufacturer's recommended attachments.
The packaging material protects the vacuum cleaner
from transport damage. We recommend you keep the
packaging for transport purposes.
Safety with children
Danger of suffocation! Ensure that any plastic wrap-
pings, bags, etc. are disposed of safely and kept out of the
reach of children.
Children must be kept away from the vacuum cleaner
unless they are constantly supervised.
en - IMPORTANT SAFETY INSTRUCTIONS
6
Do not allow the vacuum cleaner to be used as a toy.
Close attention is necessary when used near children.
WARNING
To reduce the risk of fire, electric shock or injury:
Check the voltage rating of the vacuum cleaner before
connecting the power cord to an electrical outlet. Your
power source should correspond with the voltage rating
plate located on the underside of the vacuum. Use only
household AC outlets. Never use DC power sources. If you
are not sure of your home’s voltage supply, consult a qual-
ified electrician. Connecting the vacuum cleaner to a
higher voltage than indicated in these instructions may re-
sult in damage to the vacuum cleaner or injury.
To reduce the risk of electric shock, this appliance has a
polarized plug (one blade is wider than the other.) This plug
will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the proper out-
let. Do not alter the plug in any way.
Technical safety
The vacuum cleaner operates at 25.2V.
It is classified as a Class III appliance.
This appliance is supplied by a safety extra-low voltage
(SELV) power source where the voltage is low enough to
protect users from the risk of electrical shock. A Class II
charger is used for supplying power to charge the vacuum
cleaner.
en - IMPORTANT SAFETY INSTRUCTIONS
7
Before using the vacuum cleaner and its accessories,
check for any visible signs of damage. Do not use a dam-
aged appliance.
Compare the connection data on the data plate of the
charger (voltage and frequency) with that of the electricity
supply. This data must match exactly. Without modifica-
tions, the charger is suitable for 50Hz and 60Hz.
The electrical outlet must be rated at 15Amps.
The Miele Multi Floor XXL Electrobrush and the Miele
Electro Compact handheld brush (varies according to the
model) are additional motor-driven devices designed spe-
cially for this Miele vacuum cleaner. For safety reasons, the
vacuum cleaner must not be used with a different
MieleElectrobrush/handheld brush or an electrobrush/
handheld brush produced by another manufacturer.
Before and during use, make sure that no coarse dirt or
debris is/gets trapped in the bottom of the Electrobrush/
handheld brush (depending on model).
Repairs should only be performed by an authorized ser-
vice agent in accordance with national and local safety
regulations. Unauthorized repairs could cause injury or ma-
chine damage. Otherwise the warranty may be void.
Repairs should only be carried out by a Miele-authorized
service technician. Repairs and other work by unqualified
persons can cause considerable danger to users.
en - IMPORTANT SAFETY INSTRUCTIONS
8
Miele can only guarantee the safety of the appliance
when genuine Miele replacement parts are used. Faulty
components should only be replaced with genuine Miele
parts.
Store the vacuum cleaner at an ambient temperature be-
tween 32°F and 115°F (0°C and 45°C).
Cleaning
Do not immerse the vacuum cleaner or any accessories
supplied with it in water.
The Electrobrush/handheld brush (depending on the
model), the PowerUnit, the suction wand, the body, and
the Comfort handle contain electrical wires. The plug con-
nectors must not come into contact with water. Danger of
electric shock. They should only be cleaned with a dry
cloth.
Clean the vacuum cleaner and accessories only with a
dry or slightly damp cloth when disconnected from the
power supply.
Exception:
Dust container: empty the dust container and remove the
pre-filter. Clean the dust container using a mild solution of
water and liquid dish soap only. Then dry the dust con-
tainer carefully. Replace the pre-filter in the dust container.
Proper use
Do not use the vacuum cleaner without the dust con-
tainer, pre-filter, fine dust filter, and motor protection filter
fitted.
en - IMPORTANT SAFETY INSTRUCTIONS
9
Do not use with damaged cord or plug.
If appliance is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, return it to
a service center.
Do not put any object into openings. Do not use with
any opening blocked; keep free of dust, lint, hair, and any-
thing that may reduce air flow.
Do not vacuum up anything which has been burning or
smoking, e.g., cigarettes, ashes or hot ash, whether glow-
ing or apparently extinguished.
Do not use the vacuum cleaner to vacuum up any water,
liquid or damp dirt. Wait until any freshly cleaned or sham-
pooed rugs or carpets are completely dry before attempt-
ing to vacuum.
Do not use the vacuum cleaner to vacuum toner dust.
Toner, such as that used in printers and photocopiers, can
conduct electricity.
Do not vacuum up any flammable or combustible liquids
or gases and do not vacuum in areas where such sub-
stances are stored.
Never touch the Electrobrush/handheld brush (varies ac-
cording to the model) while it is rotating.
Do not use the Electrobrush/handheld brush (varies ac-
cording to the model) at head height.
Do not vacuum at head height and do not let the suction
get anywhere near a person's head.
en - IMPORTANT SAFETY INSTRUCTIONS
10
Keep hair, loose clothing, fingers, and all part of body
away from openings and moving parts.
Use extra care when cleaning on stairs.
Accessories
Only use genuine accessories with the “ORIGINAL
Miele” logo on the packaging. The manufacturer cannot
otherwise guarantee the safety of the product.
Safety instructions and warnings for AP01battery,
LG01charger, LS03charger cradle (depending on the
model)
Safety with children
People (including children) with reduced physical, sen-
sory, or mental capabilities, or lack of experience or knowl-
edge, who are unable to use the LG01 charger/LS03
charger cradle safely may only use this vacuum cleaner if
they are supervised while using it or have been shown how
to use it in a safe way and understand and recognize the
consequences of incorrect operation.
Keep the AP01battery out of the reach of children.
Children must be kept away from the LG01charger/
LS03charger cradle unless they are constantly supervised.
en - IMPORTANT SAFETY INSTRUCTIONS
11
Technical safety
The AP01battery, the LG01charger, and the LS03
charger cradle are designed for use with the Miele HS19
vacuum Cleaner. For safety reasons, the vacuum cleaner
must not be used with a battery, charger, or charger cradle
produced by another manufacturer.
Only the LG01/xxcharger or the LS03/xxcharger cradle
supplied with the vacuum cleaner can be used to charge
the AP01battery.
xx stands for 01, 02, 03, 04, 05, 06, 07, or 08; these num-
bers identify the country version of your LG01charger and
your LS03charger cradle:
XX
01 AT, BE, BG, CH, CL, CZ, DE, DK, EE, ES, FI, FR, GR, HR, HU, IT, KZ, LT,
LU, LV, NL, NO, PL, PT, RO, RS, RU, SE, SI, SK, TR, UA, ZA
02 AE, GB, HK, IE, MY, SG
03 CA, MX, US
04 AU, NZ
05 CN
06 KR
07 JP
08 IN
If you are using a plug adapter, make sure that it is ap-
proved for continuous operation.
en - IMPORTANT SAFETY INSTRUCTIONS
12
Temporary or permanent operation on an autonomous
power supply system or a power supply system that is not
synchronized with the grid power supply (e.g., island net-
works, back-up systems) is possible. A prerequisite for op-
eration is that the power supply system complies with the
specifications of EN50160 or an equivalent standard.
The function and operation of the protective measures pro-
vided in the domestic electrical installation and in this
Miele product must also be maintained in isolated opera-
tion or in operation that is not synchronized with the grid
power supply, or these measures must be replaced by
equivalent measures in the installation. As described, for
example, in the current version of VDE-AR-E 2510-2.
Charge the vacuum cleaner at an ambient temperature
between 32°F and 115°F (0°C and 45°C).
Stop using the AP01battery immediately if you notice an
unusual smell from it, if liquid is leaking from it, if it is sig-
nificantly overheating, or if it is discolored or deformed.
Dispose of the AP01battery immediately (see safety notice
“Disposing of the AP01battery” at the end of this chapter
as well as “Caring for the environment – Disposing of old
batteries”).
Batteries will deplete over time. They can then leak cor-
rosive fluids. Avoid contact with the eyes and skin. In the
event of contact, rinse thoroughly with water and seek
medical advice.
Please contact Technical Service before sending the
AP01battery.
en - IMPORTANT SAFETY INSTRUCTIONS
13
Proper use
Do not drop or throw the AP01battery. For safety rea-
sons, do not continue to use an AP01battery which has
been damaged.
Keep the AP01battery away from naked flames or other
heat sources. Do not heat the AP01battery. Do not expose
the rechargeable battery to direct sunlight.
Do not dismantle the AP01battery.
Do not cause a short circuit by bridging the contacts of
the AP01battery, either unintentionally or deliberately.
Do not allow the AP01battery to come into contact with
liquids.
Disposing of the AP01battery: remove the AP01battery
from the vacuum cleaner. Insulate the metal contacts with
adhesive tape to prevent short circuits. Dispose of the
AP01battery in a municipal recycling facility. Do not dis-
pose of the AP01battery with your household waste.
California Proposition 65
THE FOLLOWING WARNING IS REQUIRED BY THE STATE OF
CALIFORNIA FOR CALIFORNIA RESIDENTS ONLY:
WARNING:
Cancer and Reproductive Harm -
www.P65Warnings.ca.gov.
SAVE THESE INSTRUCTIONS
en - Appliance description
14
en - Appliance description
15
aComfort handle
bRelease catch for Comfort handle (on the back)
cDust container handle
dDust container with pre-filter, fine dust filter, and motor protection filter
ePowerUnit with battery connection and connections for Comfort handle, suc-
tion wand, Electrobrush, and dust container
fRelease catches for battery (on both sides of the battery)
gCharging socket (at the bottom of the battery)
hAP01lithium-ion battery
iConnector
jMulti Floor XXL Electrobrush (some models feature BrilliantLight lighting)
kRemovable roller brush
lFlap
mRelease catch for removing the roller brush
nRelease buttons
oBattery charging state indicator
pSuction wand
qOn/Off switch with suction power selector
en - Caring for the environment
16
Disposing of sales packaging
The packaging material protects the
vacuum cleaner from transport damage.
The packaging materials used are se-
lected from materials which are environ-
mentally friendly for disposal and can
therefore be recycled.
Recycling the packaging material re-
duces the use of raw materials in the
manufacturing process and also re-
duces the amount of waste in landfill
sites. Make sure the packaging is dis-
posed of in the proper manner for your
area.
Disposing of your old machine
Before disposing of your old vacuum
cleaner, remove the fine dust filter and
dispose of it with your household
waste.
Electronic and electrical appliances
contain many valuable materials. They
also contain certain materials, com-
pounds, and components which were
essential for their correct functioning
and safety. These could be hazardous
to your health and to the environment if
disposed of with general waste or if
handled incorrectly. Please do not,
therefore, dispose of your old vacuum
cleaner with your household waste.
Instead, please make use of officially
designated collection and disposal
points to dispose of and recycle electri-
cal and electronic appliances.
Ensure that your vacuum cleaner
presents no danger to children while
being stored for disposal.
Disposing of old batteries
In many cases, electrical and electronic
appliances contain batteries which
must not be disposed of with house-
hold waste after use. You are legally
obliged to remove any old batteries
which are not securely enclosed by the
vacuum cleaner and to take them to a
suitable collection point (e.g., retailer)
where they can be handed in free of
charge. Insulate the metal contacts with
adhesive tape to prevent short circuits.
Batteries may contain substances
which can be hazardous to human
health and the environment.
The labeling on the battery will provide
further information. The bin symbol with
a cross through it means that the bat-
teries must not be disposed of in
household waste. A bin with a cross
through it which also has one or more
chemical symbols on it indicates that
the battery contains lead (Pb), cadmium
(Cd), and/or mercury (Hg).
3E&G+J
Old batteries contain valuable raw ma-
terials which can be recycled. Dispos-
ing of batteries separately makes them
easier to handle and recycle.
en-US
17
References to illustrations
The illustrations referred to in the text
are shown on the fold-out pages at
the end of these Operating Instruc-
tions.
Installation and connection
Assembling the vacuum cleaner
(Figs. 01+02)
You can assemble the vacuum cleaner
in 2 different ways.
You can place the suction wand ei-
ther above or below the PowerUnit.
Take care to assemble the vacuum
cleaner exactly as shown in the dia-
gram.
The advantages of placing the
PowerUnit at the bottom of the vac-
uum cleaner are as follows:
– secure self-standing function possible
(see “Use” – “Self-standing function for
short pauses in vacuuming”)
– ergonomic (reduced strain on the
wrist)
– convenient cleaning of large surfaces
The advantages of placing the
PowerUnit at the top of the vacuum
cleaner are as follows:
– convenient cleaning underneath furni-
ture
– PowerUnit can be removed quickly
Using the PowerUnit solo
The PowerUnit can be used on its own
without the suction wand and Electro-
brush as a quick way of vacuuming up
crumbs and lint in specific areas.
Tip: This configuration is particularly
suitable when using the three-piece ac-
cessory set (see “Using the accessories
supplied”).
Connecting the Comfort handle
(Figs. 03+04)
Depending on how you decide to con-
figure your vacuum cleaner, you can
connect the Comforthandle to either
the suction wand or the PowerUnit.
Push the Comfort handle down on to
the suction wand connection from
above until it audibly clicks into place
(left image detail).
Slide the Comfort handle along the
guide line on the dust container han-
dle and down on to the PowerUnit
connector from above until it audibly
clicks into place (right image detail).
Switch off the vacuum cleaner using
the On/Off switch on the front of the
Comfort handle if you want to sepa-
rate the sections.
Press the release catch and remove
the Comfort handle by pulling up-
ward.
Connecting the PowerUnit and the
suction wand (Figs. 05+06)
Depending on how your vacuum
cleaner is configured, the suction wand
is located either above or below the
PowerUnit.
Slide the suction wand along the
guide line on the dust container han-
dle and down on to the PowerUnit
connector from above until it audibly
clicks into place (left image detail).
en-US
18
Push the PowerUnit connector down
on to the suction wand from above
until it audibly clicks into place (right
image detail).
Press the release catch to separate
the individual sections from each
other.
Inserting the battery
(Figs. 07, 08+09)
Remove the sticker from the battery.
Push the battery along the guide lines
until it audibly clicks into place in the
PowerUnit.
If you want to separate the sections
again, press both release catches at
the side of the battery to remove the
battery.
Connecting the Electrobrush (Fig. 10)
Depending on how you decide to con-
figure your vacuum cleaner, you can
connect either the PowerUnit connector
or the suction wand connector to the
Electrobrush.
Insert the connector down into the
Electrobrush from above until it audi-
bly clicks into place.
To separate the individual sections
from each other, press the release
catch on the Electrobrush and pull
the connector out of the Electrobrush
(Fig. 06).
General battery information
The rechargeable battery is supplied
not fully charged.
Charge the battery completely before
using it for the first time. Allow approxi-
mately 4hours for this.
It is essential to charge each new bat-
tery for the first time in the PowerUnit
(Triflex vacuum), in order to deactivate
shipping mode and activate the maxi-
mum power in the battery.
Once the battery is fully charged, the
battery charging state indicator
switches off to conserve energy.
You can use the vacuum cleaner for up
to 17minutes if you are using it in its
fully assembled state at the maximum
power level.
If, however, you are using the
PowerUnit on its own and select the
lowest power level, you can vacuum for
up to 60minutes.
Charging the battery (without wall
mounting) (Fig. 11)
You can store the vacuum cleaner up-
right and charge the battery directly.
Connect the PowerUnit to the Elec-
trobrush to provide a secure base for
the vacuum cleaner.
Swing the vacuum cleaner forwards
until the Electrobrush connector audi-
bly clicks into place.
Plug the supplied charging cable into
the charging socket on the bottom of
the battery.
Plug the charger into an electrical
outlet.
The charging process will start.
You can read more about this in “Bat-
tery charging state indicator”.
en-US
19
Charging the battery (with wall
mounting) (Figs. 12+13)
There are 2 ways to store and charge
the vacuum cleaner in the supplied wall
bracket.
You will need a suitable location near
a free electrical outlet for mounting the
appliance on the wall.
Wall mounting (Figs. 14+15)
The supplied wall bracket has a mount-
ing plate with a bag of screws attached
to the back.
Attach the mounting plate to the point
on the wall where you want the wall
mounting to be.
Remove the bag of screws.
Press the release catch at the bottom
of the wall bracket.
Remove the mounting plate from the
wall bracket by sliding it downward.
Attaching the mounting plate
(Figs. 16+17)
2 plugs and 2 T20TORX screws are
supplied for attaching the mounting
plate to the wall.
You will also need a battery-operated
screwdriver or a drill (with a drilling di-
ameter of 6mm).
Depending on how you decide to con-
figure your vacuum cleaner, select a
distance of 17 11/16" or 38 9/16"
(45 cm or 98 cm) between the bottom
edge of the mounting plate and the
floor.
Be careful not to damage any electri-
cal in the wall.
Attach the mounting plate to the wall.
Attaching the charging cable to the
wall bracket (Figs. 18, 19+20)
A cable compartment is located on the
underside of the wall bracket.
Press both release catches on the un-
derside of the wall bracket and re-
move the cable compartment cover.
Plug the supplied charging cable into
the opening from above.
Lay the charging cable in its guide.
Refit the cover and close the cable
compartment.
Connecting the accessories holder
(if required) (Fig. 21)
An accessories holder is supplied for
storing the three-piece accessory set
on the wall bracket (see “Using the ac-
cessories supplied”).
Push the accessories holder on to the
wall bracket as far as it will go.
Connecting the wall bracket
(Figs. 22+23)
Slide the wall bracket down into the
mounting plate from above until it au-
dibly clicks into place.
Slide the PowerUnit of the fully as-
sembled vacuum cleaner, with the
battery inserted, down into the wall
bracket from above.
Plug the charger into the power
socket.
The charging process will start.
en-US
20
Battery charging state indicator
(while charging) (Fig. 24)
The battery charging state is displayed
on the PowerUnit.
Battery life Indicator
Approx. 0–34% Bottom light
flashes slowly
Approx. 35–69% Bottom light is lit
up; middle light
flashes slowly
Approx. 70–90% Bottom and mid-
dle lights are lit
up; top light
flashes slowly
Approx. 91–99%
100%
Bottom, middle,
and top lights are
lit up
Indicator switches
off
Once the battery is fully charged, the
battery charging state indicator
switches off to conserve energy.
If the battery has not been used for a
long time and has run down, it will go
into safe mode. As a result, the battery
charging state indicator will only re-
spond after approximately 30–60min-
utes when charging in the PowerUnit.
Battery charging state indicator
(while in use) (Fig. 24)
The battery charging state is displayed
on the PowerUnit.
Battery life Indicator
Approx. 100–70% Top, middle, and
bottom lights are
lit up
Approx. 69–35% Middle and bot-
tom lights are lit
up
Approx. 34–11% Bottom light is lit
up
Approx. 10–0% Bottom light
flashes slowly
Using the accessories supplied
(Fig. 25)
Miele offers a range of suitable acces-
sories for many Special Modes (see
“Optional accessories”).
Upholstery nozzle XL
Accessory for cleaning upholstery,
mattresses, and cushions.
Crevice nozzle
Accessory for cleaning in folds,
crevices, or corners.
Dusting brush
Accessory for vacuuming skirting
boards, carved furniture, or orna-
ments.
The head can be swiveled to ad-
just the angle.
dAccessories holder
For storing the three-piece acces-
sory set.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108

Miele Triflex HX1 Cat & Dog Mode d'emploi

Catégorie
Aspirateurs
Taper
Mode d'emploi
Ce manuel convient également à