Sony HDR-TD10 Mode d'emploi



2011 Sony Corporation

HDR-TD10

US/FR

Printed in Japan

Additional information on this product and

answers to frequently asked questions can be

found at our Customer Support Website.

De plus amples renseignements à propos

de ce produit et des réponses aux questions

fréquemment posées sont disponibles sur le site

Web de l’Assistance à la clientèle.

http://www.sony.net/

Operating Guide US

Mode d’emploi FR

3D Digital HD Video

Camera Recorder /

Caméscope numérique

HD 3D

4-268-812-22(1)

2

US

Owner’s Record

The model and serial numbers are located

on the bottom. Record the serial number

in the space provided below. Refer to these

numbers whenever you call upon your Sony

dealer regarding this product.

Model No. HDR-

Serial No.

Model No. AC-

Serial No.

WARNING

To reduce fire or shock hazard, do not

expose the unit to rain or moisture.

Do not expose the batteries to

excessive heat such as sunshine, fire or

the like.

This symbol is intended

to alert the user to the

presence of uninsulated

“dangerous voltage” within

the product’s enclosure

that may be of sufficient

magnitude to constitute

a risk of electric shock to

persons.

This symbol is intended

to alert the user to the

presence of important

operating and maintenance

(servicing) instructions in

the literature accompanying

the appliance.

3

US

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS.

DANGER - TO REDUCE THE RISK OF FIRE

OR ELECTRIC SHOCK,

CAREFULLY FOLLOW THESE

INSTRUCTIONS.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a

third grounding prong. The wide blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult an electrician for replacement of the

obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or

sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when unused for long periods of time.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the

proper configuration for the power outlet.



4

US

Representative plug of power supply cord of countries/regions around the world.

A Type

(American

Type)

B Type

(British Type)

BF Type

(British Type)

B3 Type

(British Type)

C Type

(CEE Type)

SE Type

(CEE Type)

O Type

(Ocean Type)

The representative supply voltage and plug type are described in this chart.

Depend on an area, Different type of plug and supply voltage are used.

Attention: Power cord meeting demands from each country shall be used.

 For only the United States

Use a UL Listed, 1.5-3 m (5-10 ft.), Type SPT-2 or NISPT-2, AWG no. 18 power supply

cord, rated for 125 V 7 A, with a NEMA 1-15P plug rated for 125 V 15 A.”

Europe

Countries/regions Voltage Frequency (Hz) Plug type

Austria 230 50 C

Belgium 230 50 C

Czech 220 50 C

Denmark 230 50 C

Finland 230 50 C

France 230 50 C

Germany 230 50 C

Greece 220 50 C

Hungary 220 50 C

Iceland 230 50 C

Ireland 230 50 C/BF

Italy 220 50 C

Luxemburg 230 50 C

Netherlands 230 50 C

Norway 230 50 C

Poland 220 50 C

Portugal 230 50 C

Romania 220 50 C

Russia 220 50 C

Slovak 220 50 C

Spain 127/230 50 C

Sweden 230 50 C

Switzerland 230 50 C

UK 240 50 BF

Asia

Countries/regions Voltage Frequency (Hz) Plug type

China 220 50 A

Hong Kong 200/220 50 BF

India 230/240 50 C

Indonesia 127/230 50 C

Japan 100 50/60 A

Korea (rep) 220 60 C

Malaysia 240 50 BF

Philippines 220/230 60 A/C

Singapore 230 50 BF

Taiwan 110 60 A

Thailand 220 50 C/BF

5

US

Countries/regions Voltage Frequency (Hz) Plug type

Vietnam 220 50 A/C

Oceania

Countries/regions Voltage Frequency (Hz) Plug type

Australia 240 50 O

New Zealand 230/240 50 O

North America

Countries/regions Voltage Frequency (Hz) Plug type

Canada 120 60 A

USA 120 60 A

Central America

Countries/regions Voltage Frequency (Hz) Plug type

Bahamas 120/240 60 A

Costa Rica 110 60 A

Cuba 110/220 60 A/C

Dominican (rep) 110 60 A

El Salvador 110 60 A

Guatemala 120 60 A

Honduras 110 60 A

Jamaica 110 50 A

Mexico 120/127 60 A

Nicaragua 120/240 60 A

Panama 110/220 60 A

South America

Countries/regions Voltage Frequency (Hz) Plug type

Argentina 220 50 C/BF/O

Brazil 127/220 60 A/C

Chile 220 50 C

Colombia 120 60 A

Peru 220 60 A/C

Venezuela 120 60 A

Middle East

Countries/regions Voltage Frequency (Hz) Plug type

Iran 220 50 C/BF

Iraq 220 50 C/BF

Israel 230 50 C

Saudi Arabia 127/220 50 A/C/BF

Turkey 220 50 C

UAE 240 50 C/BF

Africa

Countries/regions Voltage Frequency (Hz) Plug type

Algeria 127/220 50 C

Congo (dem) 220 50 C

Egypt 220 50 C

Ethiopia 220 50 C

Kenya 240 50 C/BF

Nigeria 230 50 C/BF

South Africa 220/230 50 C/BF

Tanzania 230 50 C/BF

Tunisia 220 50 C

6

US

Read this first

Before operating the unit, please read this

manual thoroughly, and retain it for future

reference.

CAUTION

Battery pack

If the battery pack is mishandled, the

battery pack can burst, cause a fire or even

chemical burns. Observe the following

cautions.

Do not disassemble.

Do not crush and do not expose the battery

pack to any shock or force such as hammering,

dropping or stepping on it.

Do not short circuit and do not allow metal

objects to come into contact with the battery

terminals.

Do not expose to high temperature above 60°C

(140°F) such as in direct sunlight or in a car

parked in the sun.

Do not incinerate or dispose of in fire.

Do not handle damaged or leaking lithium ion

batteries.

Be sure to charge the battery pack using a

genuine Sony battery charger or a device that

can charge the battery pack.

Keep the battery pack out of the reach of small

children.

Keep the battery pack dry.

Replace only with the same or equivalent type

recommended by Sony.

Dispose of used battery packs promptly as

described in the instructions.

Replace the battery with the specified type

only. Otherwise, fire or injury may result.

AC Adaptor

Do not use the AC Adaptor placed in a

narrow space, such as between a wall and

furniture.

Use the nearby wall outlet (wall socket)

when using the AC Adaptor. Disconnect

the AC Adaptor from the wall outlet (wall



socket) immediately if any malfunction

occurs while using your camcorder.

Even if your camcorder is turned off, AC

power source (mains) is still supplied to

it while connected to the wall outlet (wall

socket) via the AC Adaptor.

Note on the power cord (mains lead)

The power cord (mains lead) is designed

specifically for use with this camcorder

only, and should not be used with other

electrical equipment.

Excessive sound pressure from earphones

and headphones can cause hearing loss.

For customers in the U.S.A. and CANADA

RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are

recyclable.

You can help preserve our

environment by returning

your used rechargeable

batteries to the collection and

recycling location nearest you.

For more information

regarding recycling of

rechargeable batteries, call toll

free 1-800-822- 8837, or visit

http://www.rbrc.org/

Caution: Do not handle

damaged or leaking Lithium-

Ion batteries.

Battery pack

This device complies with Part 15 of the

FCC Rules. Operation is subject to the

following two conditions: (1) This device

may not cause harmful interference, and

(2) this device must accept any interference

received, including interference that may

cause undesired operation.

7

US

This Class B digital apparatus complies

with Canadian ICES-003.

For the customers in the U.S.A.

UL is an internationally recognized safety

organization.

The UL Mark on the product means it has

been UL Listed.

If you have any questions about this

product, you may call:

Sony Customer Information Center 1-800-

222-SONY (7669).

The number below is for the FCC related

matters only.

Regulatory Information

Declaration of Conformity

Trade Name: SONY

Model No.: HDR-TD10

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo, San Diego,

CA 92127 U.S.A.

Telephone No.: 858-942-2230

This device complies with Part 15 of the

FCC Rules. Operation is subject to the

following two conditions: (1) This device

may not cause harmful interference,

and (2) this device must accept any

interference received, including

interference that may cause undesired

operation.

CAUTION

You are cautioned that any changes or

modifications not expressly approved in

this manual could void your authority to

operate this equipment.

Note

This equipment has been tested and found

to comply with the limits for a Class B

digital device, pursuant to Part 15 of the

FCC Rules.

These limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses, and

can radiate radio frequency energy and,

if not installed and used in accordance

with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that

interference will not occur in a particular

installation. If this equipment does cause

harmful interference to radio or television

reception, which can be determined by

turning the equipment off and on, the

user is encouraged to try to correct the

interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the

equipment and receiver.

Connect the equipment into an outlet on

a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/

TV technician for help.

The supplied interface cable must be used

with the equipment in order to comply with

the limits for a digital device pursuant to

Subpart B of Part 15 of FCC Rules.

For the State of California , USA only

Perchlorate Material – special handling

,may apply,

See

www.dtsc.ca.gov/hazardouswaste/

perchlorate

Perchlorate Material: Lithium battery

contains perchlorate.



8

US

Supplied items

The numbers in ( ) are the supplied

quantity.

 Camcorder (1)

 AC Adaptor (1)

 Power cord (Mains lead) (1)

 HDMI cable (1) 

 A/V connecting cable (1) 

 USB cable (1) 

 USB Adaptor Cable (1) 

 Wireless Remote Commander (1)

A button-type lithium battery is already

installed. Remove the insulation sheet before

using the Wireless Remote Commander.

 Rechargeable battery pack NP-FV70 (1)

 CD-ROM “Handycam” Application

Software (1) (p. 42)

“PMB” (software, including “PMB Help”)

“Handycam” Handbook (PDF)

 “Operating Guide” (This manual) (1)

See page 22 for the memory card you can use

with this camcorder.





Using the camcorder

Do not hold the camcorder by the following

parts, and also do not hold the camcorder by

the jack covers.

Shoe cover LCD screen

Battery pack

The camcorder is not dustproofed, dripproofed

or waterproofed. See “Precautions” (p. 64).

Viewing 3D movies

You may feel uncomfortable symptoms

such as eyestrain, nausea, or a tired feeling

while watching 3D movies recorded with

the camcorder on 3D compatible monitors.

When you watch 3D movies, we recommend

that you take a break at regular time intervals.

Since the need for or frequency of break times

varies between individuals, please set your

own standards. If you feel sick, stop watching

3D movies, and consult a doctor as needed.

Also, refer to the operating instructions of

the connected device or the software used

with the camcorder. A child’s vision is always

vulnerable (especially for children under 6

years of age). Before allowing them to watch 3D

movies, please consult with an expert, such as a

pediatric or ophthalmic doctor. Make sure your

children follow the precautions above.

The way people perceive 3D movies varies from

person to person.



9

US

Menu items, LCD panel, and lens

Avoid operating the touch panel under

following conditions, as doing so may cause a

malfunction of the camcorder.

When there are droplets of water on the touch

panel

With wet fingers

With a pointed object such as pencil,

ballpoint pen, nail, etc.

Holding the camcorder by grabbing the panel

inside the frame

With gloves on

A menu item that is grayed out is not available

under the current recording or playback

conditions.

The LCD screen is manufactured using

extremely high-precision technology, so over

99.99% of the pixels are operational for effective

use. However, there may be some tiny black

points and/or bright points (white, red, blue,

or green in color) that appear constantly on the

LCD screen. These points are normal results of

the manufacturing process and do not affect the

recording in any way.

Exposing the LCD screen or the lens to direct

sunlight for long periods of time may cause

malfunctions.

Do not aim at the sun. Doing so might cause

your camcorder to malfunction. Take images

of the sun only in low light conditions, such as

at dusk.







About language setting

The on-screen displays in each local language

are used for illustrating the operating

procedures. Change the screen language before

u

sing the ca

mcorder if necessary (p. 20).

On recording

To ensure stable operation of the memory

card, it is recommended to format the memory

card with your camcorder before the first

use. formatting the memory card will erase

all the data stored on it and the data will be

irrecoverable. Save your important data on your

PC etc.

Before starting to record, test the recording

function to make sure the image and sound are

recorded without any problems.

Compensation for the contents of recordings

cannot be provided, even if recording or

playback is not possible due to a malfunction of

the camcorder, recording media, etc.

TV color systems differ depending on the

country/region. To view your recordings on a

TV, you need an NTSC system-based TV.

Television programs, films, video tapes,

and other materials may be copyrighted.

Unauthorized recording of such materials may

be contrary to the copyright laws.

Use the camcorder in accordance with local

regulations.

Notes on playing back

You may not be able to play back normally

images recorded on your camcorder with other

devices. Also, you may not be able to play back

images recorded on other devices with your

camcorder.

Standard (STD) image quality movies recorded

on SD memory cards cannot be played on AV

equipment of other manufacturers.



Black points

White, red, blue or green points

10

US

DVD media recorded with HD image

quality (high definition)

DVD media recorded with high definition

image quality (HD) can be played back with

devices that are compatible with the AVCHD

standard. You cannot play discs recorded with

high definition image quality (HD) with DVD

players/recorders as they are not compatible

with the AVCHD format. If you insert a disc

recorded with the AVCHD format (high

definition image quality (HD)) into a DVD

player/recorder, you may not be able to eject

the disc.

Save all your recorded image data

To prevent your image data from being lost,

save all your recorded images on external media

periodically. To save images on your computer,

see page 40, and to save images on external

devices, see page 45.

3D movies cannot be saved on a disc. Save them

on external media devices (p. 47).

The type of discs or media on which the

images can be saved depend on the [

REC

Mode] selected when the images were recorded.

Movies recorded with [60p Quality

] can

be saved using external media (p. 47). Movies

recorded with [Highest Quality

] can be

saved on external media devices or on Blu-ray

discs (p. 47).

Notes on battery pack/AC Adaptor

Be sure to remove the battery pack or the AC

Adaptor after turning off the camcorder.

Disconnect the AC Adaptor from the

camcorder, holding both the camcorder and the

DC plug.



Note on the camcorder/battery pack

temperature

When the temperature of the camcorder

or battery pack becomes extremely high or

extremely low, you may not be able to record

or play back on the camcorder, due to the

protection features of the camcorder being

activated in such situations. In this case, an

indicator appears on the LCD screen.

When the camcoder is connected to a

computer or accessories

Do not try to format the recording media of the

camcorder using a computer. If you do so, your

camcorder may not operate correctly.

When connecting the camcorder to another

device with communication cables, be sure to

insert the connector plug in the correct way.

Pushing the plug forcibly into the terminal

will damage the terminal and may result in a

malfunction of the camcorder.

When the camcorder is connected to other

devices through a USB connection and the

power of the camcorder is turned on, do not

close the LCD panel. The image data that has

been recorded may be lost.

If you cannot record/play back images,

perform [Format]

If you repeat recording/deleting images for

a long time, fragmentation of data occurs on

the recording media. Images cannot be saved

or recorded. In such a case, save your images

on some type of external media first, and then

perform [Format] by touching

(MENU)

 [Setup]  [

( Media Settings)] 

[Format]  the desired medium 



.

Notes on optional accessories

We recommend using genuine Sony accessories.

Genuine Sony accessories may not be available

in some countries/regions.



11

US

About this manual, illustrations and

on-screen displays

In this manual, the and icons indicate

the 3D and 2D sides of the 2D/3D switch,

respectively.

The example images used in this manual for

illustration purposes are captured using a

digital still camera, and therefore may appear

different from images and screen indicators that

actually appear on your camcorder. And, the

illustrations of your camcorder and its screen

indication are exaggerated or simplified for

understandability.

In this manual, the internal memory and the

memory card are called “recording media.”

In this manual, the DVD disc recorded with

high definition image quality (HD) is called

AVCHD recording disc.

Design and specifications of your camcorder

and accessories are subject to change without

notice.

Notes on use

Do not do any of the following. Otherwise, the

recording media may be damaged, recorded

images may be impossible to play back or may

be lost, or other malfunctions could occur.

ejecting the memory card when the access

l

amp (p.

23) is lit or flashing

removing the battery pack or AC Adaptor

from the camcorder, or applying mechanical

shock or vibration to the camcorder when the

(Movie)/ (Photo) lamps (p. 25) or the

access lamp (p. 23) are lit or flashing

When using a shoulder belt (sold separately), do

not crash the camcorder against an object.







12

US

Table of contents

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Read this first . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Getting started

Step 1: Charging the battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Charging the battery pack abroad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Step 2: Turning the power on, and setting the date and time . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Changing the language setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Step 3: Preparing the recording media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

To check the recording media settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Copying movies and photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Recording/Playback

Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Optimum distance from the subject and zooming level . . . . . . . . . . . . . . . . . . . . . . . 29

Adjusting the 3-dimensional appearance of the image

during recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Playback on the camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Performing Highlight Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Playing images on a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Advanced Operations

Deleting images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Saving movies and photos with a computer

Useful functions available if you connect the camcorder to computer . . . . . . . . . . . . . . . 40

Preparing a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

When using a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Starting PMB (Picture Motion Browser) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

and indicate the 3D and 2D sides of the 2D/3D switch (p. 25), respectively.

The items you can set differ depending on the position of the switch.

13

Table of contents

US

Saving images with an external device

Selecting a method for saving images with an external device . . . . . . . . . . . . . . . . . . . . . . . . 45

Saving images on an external media device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Creating a high definition image quality (HD) disc with a DVD writer, etc.,

other than DVDirect Express . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Creating a standard definition image quality (STD) disc with a recorder, etc. . . . . . . . 51

Customizing your camcorder

Using menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Getting detailed information from the “Handycam” Handbook . . . . . . . . . . . . . . . . . . . . . . . . 57

Additional information

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Recording time of movies/number of recordable photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Quick reference

Screen indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Parts and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

14

US

Getting started

Step 1: Charging the battery pack

You can charge the “InfoLITHIUM” battery pack (V series) after attaching it to your

camcorder.

Notes

You cannot attach any “InfoLITHIUM” battery pack other than the V series to your camcorder.

1

Turn off your camcorder by closing the LCD screen.

2

Attach the battery pack by sliding it in the direction of the arrow until it

clicks.

3

Connect the AC Adaptor and the power cord (mains lead) to your

camcorder and the wall outlet (wall socket).

The /CHG (flash/charge) lamp lights up and charging starts. The /CHG (flash/charge)

lamp turns off when the battery pack is fully charged.





/CHG (flash/charge) lamp

Battery pack

DC IN jack

To the wall outlet (wall

socket)

AC Adaptor

DC plug

Power cord (Mains

lead)

Align the  mark on the DC plug with that on

the DC IN jack.

15

US

Getting started

4

When the battery is charged, disconnect the AC Adaptor from the DC IN

jack of your camcorder.

Charging time

Approximate time (min.) required when you fully charge a fully discharged battery pack.

Battery pack Charging time

NP-FV50 155

NP-FV70 (supplied) 195

NP-FV100 390

The charging times shown in the table above are measured when charging the camcorder at a

temperature of 25

C (77 °F). It is recommended that you charge the battery in a temperature range of 10

C to 30 C (50 °F to 86 °F).

Tips

See page 61 on recording and playing time.

When your camcorder is on, you can check the approximate amount of remaining battery power with the

remaining battery indicator at the upper right on the LCD screen.

To remove the battery pack

Close the LCD screen. Slide the BATT (battery) release lever () and remove the battery

pack ().

To use a wall outlet (wall socket) as a power source

Make the same connections as “Step 1: Charging the battery pack” (p. 14). Even if the battery

pack is attached, the battery pack is not discharged.







16

US

Notes on the battery pack

When you remove the battery pack or disconnect the AC Adaptor, turn the camcorder off and make sure

that the

(Movie)/ (Photo) lamps (p. 25), the access lamp (p. 23) are turned off.

The

/CHG (flash/charge) lamp flashes during charging under the following conditions:

The battery pack is not attached correctly.

The battery pack is damaged.

The temperature of the battery pack is low.

Remove the battery pack from your camcorder and put it in a warm place.

The temperature of the battery pack is high.

Remove the battery pack from your camcorder and put it in a cool place.

We do not recommend using an NP-FV30, which only allows short recording and playback times, with

your camcorder.

In the default setting, the power turns off automatically if you leave your camcorder without any

operation for about 5 minutes, to save battery power ([A. Shut Off]).

Notes on the AC Adaptor

Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from

the wall outlet (wall socket) immediately if any malfunction occurs while using your camcorder.

Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.

Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This

may cause a malfunction.

Charging the battery pack abroad

You can charge the battery pack in any countries/regions using the AC Adaptor supplied with

your camcorder within the AC 100 V - 240 V, 50 Hz/60 Hz range.

Do not use an electronic voltage transformer.







17

US

Getting started

Step 2: Turning the power on, and setting the

date and time

1

Open the LCD screen of your camcorder.

Your camcorder is turned on.

To turn on your camcorder when the LCD screen is open, press POWER.

2

Select the desired language, then touch [Next].

3

Select the desired geographical area with

/ , then touch [Next].



MODE lamp

POWER button

Touch the button on the

LCD screen

18

US

4

Set [Daylight Savings] or [Summer Time], then touch [Next].

If you set [Daylight Savings] or [Summer Time] to [On], the clock advances 1 hour.

5

Select the date format, then touch [Next].

6

Select the date and time, touch

/ to set the value, then touch

[Next] 

*.

* The confirmation screen appears only when you set the clock for the first time.

The clock starts.

To set the date and time again, touch (MENU)  [Setup]  [ ( Clock Settings)] 

[Date & Time Setting]  [Date & Time]. When an item is not on the screen, touch

/  until the

item appears.

7

Touch [Run].

If you touch [Run Later], the recording mode screen appears. When you turn on the camcorder

next time, the [Auto 3D Lens Adjust] screen will appear.



19

US

Getting started

8

Aim the camcorder at a subject to display it on the LCD screen.

Be sure that the subject produces a scale higher than the



mark. The subject will appear doubled.

If you feel uncomfortable viewing the image in 3D, press 2D/3D DISP and check the image in 2D

(p. 25).

9

Touch

.

The camcorder automatically zooms in or out to adjust the lenses. Do not change the subject until

the adjustment is completed.

Notes

If [Could not adjust.] appears, touch [Run Again].

If the 2D/3D swit

ch (p. 25) is set to 2D, the [Auto 3D Lens Adjust] screen does not appear.

Type of subjects that should be displayed on the LCD screen for [Auto 3D Lens

Adjust]

The scale indicated varies depending on the subject displayed on the LCD screen.

Subjects that indicate a higher scale:

Bright subjects, such as objects outdoors in daylight

Subjects with various colors and shapes

Subjects that indicate a lower scale and result in adjustment failure:

Dark subjects, such as objects viewed at night

Subjects within 2 m (6 ft. 6 3/4 in.) away from the camcorder

Plain, non-colorful subjects

Subjects that repeat the same pattern, such as rows of windows on buildings

Moving subjects









Scale

20

US

Notes

The date and time does not appear during recording, but they are automatically recorded on the

recording media, and can be displayed during playback. To display the date and time, touch

(MENU)  [Setup]  [

( Playback Settings)]  [Data Code]  [Date/Time]  .

You can turn off the operation beeps by touching

(MENU)  [Setup]  [ ( General

Settings)]  [Beep]  [Off] 

.

To turn off the power

Close the LCD screen.

The

(Movie) lamp flashes for a few seconds and the camcorder is turned off.

Tips

You can turn off the camcorder also by pressing POWER.

When [Power On By LCD] is set to [Off], turn off your camcorder by pressing POWER.

Changing the language setting

You can change the on-screen displays to show messages in a specified language.

Touch

(MENU)  [Setup]  [ ( General Settings)]  [Language Setting] 

a desired language 

  .









La page charge ...

Sony HDR-TD10 Mode d'emploi

Sony HDR-TD10 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents