brew the desired number of cups.
To avoid overflow, do not fill the water tank with water past the max line.
4. Place the mesh filter into the filter holder, making sure it is assembled correctly.
5. Place a 1x4 paper filter (not supplied) into the mesh filter.
6. Add the desired ground coffee in the paper filter by spreading it evenly.
It is recommended to use a level spoon of ground coffee (approximately 6g)
for every cup of coffee.
7. Close the top cover until a click is heard.
8. Slide the jug into the appliance ensuring it sits correctly on the plate.
9. Plug the coffee maker into the mains socket.
10. Press the power on/off button to turn on the coffee maker.
The red power indicator light will illuminate, indicating that the appliance is
brewing coffee.
11. The coffee will begin to flow from the filter holder after a short time.
During brewing, you can remove the jug from the warming plate. The brewing
process does not stop during this period and only the flow of coffee from the
filter holder stops. Do not remove the jug for longer than 30 seconds or the
coffee may overflow the filter holder.
Although the coffee maker has the above feature, it is not recommended to
pour coffee before the cycle has completed as do this may affect the flavour
of the coffee.
It is normal for the appliance to emit steam while it is brewing coffee.
The brewing process can be interrupted at any time by pressing the power
on/off button. The red power indicator light will go out.
12. When the brewing process is finished, wait for about 1 minute to allow coffee
to stop dripping and then remove the jug to serve.
13. To keep coffee warm after the brewing process has finished, place the jug on the
warming plate.
The appliance is designed to keep the coffee warm for approximately 40
minutes and then the appliance will be turned off automatically.
14. To turn off the coffee maker, press the power on/off button.
The red power indicator light will go out.
Turn off and unplug the appliance from the
mains socket. Allow the appliance to cool down
Clean the outside of the appliance with a
slightly damp cloth. Dry thoroughly.
Never immerse the appliance in water.
Clean the removable parts in warm soapy
water then rinse them thoroughly.
Do not use abrasive or chemical cleaning