Sony CDX-M800 Le manuel du propriétaire

Marque: Sony

Modèle: CDX-M800

Catégorie: Lecteur CD

Taper: Le manuel du propriétaire

Operating Instructions

Mode d’emploi

Manual de instrucciones

Owner’s Record

The model and serial numbers are located on the bottom of the unit.

Record these numbers in the space provided below.

Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No. CDX-M800 Serial No.

CDX-M800

For installation and connections, see the supplied installation/connections manual.

En ce qui concerne l’installation et les connexions, consulter le manuel

d’installation/raccordement fourni.

Para obtener información sobre la instalación y las conexiones, consulte el manual

de instalación/conexiones suministrado.

3-251-123-11 (2)

Compact Disc

Player

Welcome !

Thank you for purchasing this Sony Compact

Disc Player. You can enjoy its various features

even more with:

• Optional CD/MD units (both changers and

players)*

• CD TEXT information (displayed when a CD

TEXT disc*

is played).

• Supplied controller accessory

Card remote commander RM-X110

• Optional controller accessory

Wireless rotary commander RM-X6S

*1 This unit works with Sony products only.

*2 A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name,

and track names. This information is recorded on

the disc.

Warning

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment

generates, uses, and can radiate radio frequency

energy and, if not installed and used in

accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be

determined by turning the equipment off and on,

the user is encouraged to try to correct the

interference by one or more of the following

measures:

–

Reorient or relocate the receiving antenna.

–

Increase the separation between the equipment

and receiver.

–

Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

–

Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate this

equipment.

The use of optical instruments with this product

will increase eye hazard.

CAUTION

The “XM Ready” logo indicates that this product

will control a Sony XM tuner module (sold

separately).

Please see your nearest authorized Sony dealer

for details on the XM tuner module.

For instructions on XM tuner operation, please

refer to the XM tuner module’s included

instruction manual.

Table of Contents

Location of controls. . . . . . . . . . . . . . . . . . . . 4

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Notes on discs . . . . . . . . . . . . . . . . . . . . . . . . 7

Getting Started

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . 8

Setting the clock . . . . . . . . . . . . . . . . . . . . . . 8

CD Player

CD/MD Unit (optional)

Playing a disc. . . . . . . . . . . . . . . . . . . . . . . . . 9

Display items. . . . . . . . . . . . . . . . . . . . . . . . 10

Playing tracks repeatedly

— Repeat Play . . . . . . . . . . . . . . . . . . . . 11

Playing tracks in random order

— Shuffle Play . . . . . . . . . . . . . . . . . . . . 11

Labeling a CD

— Disc Memo*. . . . . . . . . . . . . . . . . . . . 12

Locating a disc by name

— List-up* . . . . . . . . . . . . . . . . . . . . . . . 13

* Functions available with optional CD/MD unit

Radio

Storing stations automatically

— Best Tuning Memory (BTM). . . . . . . 13

Receiving the stored stations. . . . . . . . . . . . 14

Storing only the desired stations . . . . . . . . . 14

Storing station names

— Station Memo. . . . . . . . . . . . . . . . . . . 15

Tuning in a station through a list

— List-up . . . . . . . . . . . . . . . . . . . . . . . . 16

Other Functions

Adjusting the sound characteristics . . . . . . 16

Quickly attenuating the sound . . . . . . . . . . 17

Changing the sound and display settings

— Menu . . . . . . . . . . . . . . . . . . . . . . . . . 17

Setting the equalizer (EQ7). . . . . . . . . . . . . 18

Setting the Dynamic Soundstage Organizer

(DSO). . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Selecting the display mode

and display image. . . . . . . . . . . . . . . . . . 20

Connecting auxiliary audio equipment. . . . 21

Additional Information

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 21

Removing the unit. . . . . . . . . . . . . . . . . . . . 22

Specifications . . . . . . . . . . . . . . . . . . . . . . . 23

Troubleshooting . . . . . . . . . . . . . . . . . . . . . 24

Error displays/Messages. . . . . . . . . . . . . . . 25

Location of controls

Refer to the pages listed for details.

a SCRL (scroll) button 10

b DSPL (display mode change) button

10, 12

c Number buttons

(1) REP 11

(2) SHUF 11

To store stations/receive stored stations.

d EQ7 button 18

e MENU button

To display the menus.

f SOURCE (Power on/Radio/CD/MD*

AUX*

) button

To select the source.

g SEEK (</,) buttons

To skip tracks/fast-forward, reverse a track/

tune in stations automatically, find a station

manually/select a setting.

h SOUND button 16

i OFF (Stop/Power off) button

9, 21

j VOL (+/–) buttons

To turn up or down the volume.

k OPEN/CLOSE button 9

l MODE button

To change the operation.

m DSO button 19

n LIST button 13, 16

o DISC (M/m) buttons

To receive preset stations/change the disc*

skip albums*

/select a menu.

p ENTER button

To enter a setting.

q ATT button 17

*1 When an optional MD unit is connected.

*2 Available only when an optional Sony portable

device is connected to BUS AUDIO IN of the unit.

You cannot connect any optional CD/MD units at

the same time.

*3 When an optional CD/MD unit is connected.

*4 Available only when an optional CD unit with the

MP3 file control function is connected, and MP3 file

is played.

Card remote commander RM-X110

DISC

–

ATTOFF

SCRL

REP SHUF

DSPL

MODE

SOURCE

DISC

SEEK

–

ENTER

LIST

EQ7 DSO

VOL

–

OPEN/CLOSE

DISC

–

SOURCE

DISC

SEEK

–

In menu mode, the currently selectable button(s) of

these four are indicated with a “ v” in the display.

Note

If the display disappears by pressing (OFF), it cannot

be operated with the card remote commander unless

(SOURCE) on the unit is pressed, or a disc is inserted

to activate the unit first.

Tip

Refer to “Replacing the lithium battery” for details on

how to replace the batteries (page 22).

(SEEK) (<):

to select

leftwards

(DISC) (M):

to select upwards

(DISC) (m):

to select downwards

(SEEK) (,):

to select

rightwards

The buttons on the unit share the same

functions as those on the card remote

commander.

a OPEN button 9

b Main display window

c IMAGE button 20

d qf Receptor for the card remote

commander

e qs RESET button 8

f OFF (Stop/Power off) button*

g SCRL (scroll) button

h DSPL (display mode change) button

i Sub display window

j SEEK/AMS (.m/M>) button

k MENU button

m LIST/CAT*

button

CLOSE (front panel close) button

p SOURCE button

q MODE button

r VOL (–/+) button

s DSO button

t EQ7 button

u SOUND button

v DISC (+/–) buttons

w ENTER button

x Z (eject) button 9

Main display side

Operation side

CDX-M800

continue to next page t

*1 Warning when installing in a car

without an ACC (accessory) position

on the ignition switch

After turning off the ignition, be sure to

press and hold (OFF) on the unit until the

display disappears.

Otherwise, the display does not turn off and

this causes battery drain.

*2 (CAT) is available only when the XM tuner is

connected.

Precautions

• If your car has been parked in direct sunlight,

allow the unit to cool off before operating it.

• Power antenna will extend automatically while

the unit is operating.

Caution

While driving, do not use the CUSTOM FILE

feature or any other functions which may divert

your attention from the road.

If you have any questions or problems

concerning your unit that are not covered in this

manual, please consult your nearest Sony dealer.

Moisture condensation

On a rainy day or in a very damp area, moisture

condensation may occur inside the lenses and

display of the unit. Should this occur, the unit

will not operate properly. In such a case, remove

the disc and wait for about an hour until the

moisture has evaporated.

To maintain high sound quality

Be careful not to splash juice or other soft drinks

onto the unit or discs.

Notes on discs

• To keep the disc clean, do not touch the surface.

Handle the disc by its edge.

• Keep your discs in their cases or disc

magazines when not in use.

Do not subject the discs to heat/high

temperature. Avoid leaving them in parked cars

or on dashboards/rear trays.

• Do not attach labels, or use discs with sticky

ink/residue. Such discs may stop spinning

when used, causing a malfunction, or may ruin

the disc.

• Do not use any discs with labels or stickers

attached.

The following malfunctions may result from

using such discs:

– Inability to eject a disc (due to a label or

sticker peeling off and jamming the eject

mechanism).

– Inability to read audio data correctly (e.g.,

playback skipping, or no playback) due to

heat shrinking of a sticker or label causing a

disc to warp.

• Discs with non-standard shapes (e.g., heart,

square, star) cannot be played on this unit.

Attempting to do so may damage the unit. Do

not use such discs.

• You cannot play 8 cm (3 in) CDs.

• Before playing, clean the discs with a

commercially available cleaning cloth. Wipe

each disc from the center out. Do not use

solvents such as benzine, thinner, commercially

available cleaners, or antistatic spray intended

for analog discs.

Notes on CD-R/CD-RW discs

• You can play CD-Rs (recordable CDs)/CD-

RWs (rewritable CDs) designed for audio use

on this unit.

Look for these marks to distinguish CD-Rs/

CD-RWs for audio use.

These marks denote that a disc is not for audio

use.

• Some CD-Rs/CD-RWs (depending on the

equipment used for its recording or the

condition of the disc) may not play on this unit.

• You cannot play a CD-R/a CD-RW that is not

finalized*.

* A process necessary for a recorded CD-R/CD-RW

disc to be played on the audio CD player.

Getting Started

Resetting the unit

Before operating the unit for the first time, or

after replacing the car battery or changing the

connections, you must reset the unit.

Press the RESET button with a pointed object,

such as a ball-point pen.

Resetting the unit during use in sub-

display position

Notes

• After resetting the unit in the closed position, be sure

to press (OPEN) on the unit once before operating

further. If a disc is in the unit, the disc will be ejected

automatically. Insert the disc again.

• Pressing the RESET button will erase the clock

setting and some stored contents.

Setting the clock

The clock uses a 12-hour digital indication.

Example: To set the clock to 10:08

1 Press (MENU), then press M or m

repeatedly until “Clock Adjust”

appears.

1Press (ENTER).

The hour indication flashes.

2Press M or m to set the hour.

3Press ,.

The minute indication flashes.

4Press M or m to set the minute.

2 Press (ENTER).

The clock starts. After the clock setting is

completed, the display returns to normal play

mode.

Tip

When Clock mode is set to on, the time is displayed

only when normal play mode is selected. (In the sub

display window, the time is always displayed.) (page

17).

RESET button

CD Player

CD/MD Unit (optional)

In addition to playing a CD with this unit, you

can also control external CD (MP3 playable CD)/

MD units. If you connect optional MP3 playable

CD units (eg., MP3 CD changer), you can play

MP3 files; compressed audio files (tracks) with

quality of sound.

Note

If you connect an optional CD (MP3 playable CD) unit

with the CD TEXT function, the CD TEXT information

will appear in the display when you play a CD TEXT

disc.

Playing a disc

(With this unit)

1 Press (OPEN /CLOSE) or (OPEN ) on the

unit and insert the disc (labeled side

up).

Playback starts automatically.

2 Press (OPEN /CLOSE) or ( C LOSE) on

the unit to close the front panel.

If a disc is already inserted, press (SOURCE)

repeatedly until “CD” appears to start playback.

Notes

• While the first/last track on the disc is playing, if

< or , is pressed, playback skips to the last/first

track of the disc.

• When the last track on the disc is over, playback

restarts from the first track of the disc.

• With an optional unit connected, playback of the

same source will continue on to the optional CD/MD

unit.

(With optional unit)

1 Press (SOURCE) repeatedly to select

“CD” or “MD (MS*

).”

2 Press (MODE) repeatedly until the

desired unit appears.

Playback starts.

*1 MS: MG Memory Stick System-up Player MGS-X1

*2 Available only when an MP3 file is played. Albums

are folders of a CD containing MP3 files.

Cautions when connecting MGS-X1 and MD unit(s)

This unit recognizes MGS-X1 as an MD unit.

• When you want to play MGS-X1, press (SOURCE) to

select “MS” or “MD.” If “MS” appears in the source

display, MGS-X1 starts to play. If “MD” appears in

the source display, press (MODE) to select “MS,” to

start playback.

• When you want to play an MD unit, press (SOURCE)

to select “MD” or “MS.” If your desired MD unit

appears in the source display, it starts to play. If “MS”

or another MD unit appears in the source display,

press (MODE) to select your desired MD unit, to

start playback.

Notes when connecting MP3 playable CD unit(s)

• If a disc with no MP3 files (tracks) is inserted, “NO

Music” appears in the display and playback of the

next disc starts.

• Before playing a track, this unit reads all track and

album information on the disc. Depending on the

track structure, it may take more than a minute

before playback begins. During this time, “Read” is

displayed. Please wait for play to start automatically

when the reading is complete.

To Press

Stop playback (OFF)

Eject the disc (OPEN/CLOSE) or

(OPEN) then Z on the unit

Skip tracks

– Automatic

Music Sensor

(SEEK) (</,)

[once for each track]

Fast-forward/

reverse

–Manual Search

(SEEK) (</,)

[hold to desired point]

To Press

Skip discs

–Disc selection

(DISC) (M/m)

Skip albums*

–Album selection

(DISC) (M/m) during

playback of a CD containing

MP3 files

[hold to desired point]

Display items

When the disc/album/track changes, any

prerecorded title*

of the new disc/album/track is

automatically displayed (if the Auto Scroll

function is set to “on,” names exceeding 12

characters will be scrolled (page 17)).

*1 When pressing (DSPL), “NO Disc Name”, “NO

Album Name”, or “NO Track Name” indicates that

there is no disc name, album name, or track name

and “NO ID3 Tag” indicates that there is no ID3 tag.

*2 “MP3”/“MDLP” appears in the display (below the

clock), depending on the REP, SHUF setting.

*3 Available only when an optional MD unit with the

MDLP function is connected, and an MDLP disc is

played.

*4 When pressing (DSPL), “NO Disc Name” or “NO

Track Name” indicates that there is no Disc Memo

(page 12) or prerecorded name to display.

*5 If the disc has been labeled by this unit using the

CUSTOM FILE function, Disc Memo is displayed

preferentially.

*6 Only for CD TEXT discs with the artist name.

*7 Available only when an MP3 file is played.

Notes

• Some characters cannot be displayed. Characters

and signs which cannot be displayed appear as “ x.”

• For some CD TEXT discs or ID3 tags with very

many characters, information may not scroll.

• This unit cannot display the artist name for each

track of a CD TEXT disc or an album.

Tip

When A.Scroll (Auto Scroll) is set to off, and the disc/

track/album is changed, the disc/track/album name or

ID3 tag does not scroll.

To Press

Switch display

item

(DSPL)

Scroll display item (SCRL)

Track

number

Elapsed

playing time

Displayable

items

• Disc number

•Album

number*

MP3*

/MDLP display*

MP3: MP3 playback

LP2: LP2 playback

LP4: LP4 playback

Clock

Music source

Displayable items

• Disc name*

artist name

• Album name*

• Track name*

• ID3 tag*

Playing tracks repeatedly

— Repeat Play

You can select:

• REP-Track — to repeat the current track.

•REP-Album*

— to repeat the tracks in the

current album.

•REP-Disc*

— to repeat the tracks in the

current disc.

*1 Available only when an MP3 file is played.

*2 Available only when one or more optional CD/MD

units are connected.

During playback, press (1) (REP)

repeatedly until the desired setting

appears in the display.

Repeat Play starts.

To return to normal play mode, select “REP-off.”

Playing tracks in random

order

— Shuffle Play

You can select:

• SHUF-Album*

— to play the albums in the

current optional CD unit with the MP3 file

control function in random order.

• SHUF-Disc — to play the tracks on the current

disc in random order.

• SHUF-Changer*

— to play the tracks in the

current optional CD (MD) unit in random

order.

• SHUF-All*

— to play all the tracks in all the

connected CD (MD) units (including this unit)

in random order.

*1 Available only when an MP3 file is played.

*2 Available only when one or more optional CD (MD)

units are connected.

*3 Available only when one or more optional CD units,

or two or more optional MD units are connected.

During playback, press (2) (SHUF)

repeatedly until the desired setting

appears in the display.

Shuffle Play starts.

To return to normal play mode, select “SHUF-

off.”

Note

“SHUF-All” will not shuffle tracks between CD units

and MD units.

Labeling a CD

— Disc Memo (For a CD unit with the

CUSTOM FILE function)

You can label each disc with a custom name

(Disc Memo). You can enter up to 8 characters

for a disc. If you label a CD, you can locate the

disc by name (page 13).

1 Start playing the disc you want to label

in a CD unit with the CUSTOM FILE

function.

2 Press (MENU), then press M or m

repeatedly until “Name Edit” appears.

3 Press (ENTER).

The unit will repeat the disc during the

labeling procedure.

4 Enter the characters.

1 Press M*

repeatedly to select the

desired character.

A t B t C ... t 0 t 1 t 2 ... t +

t – t

... t *

t A

*1 For reverse order, press m.

*2 (blank space)

2 Press , after locating the desired

character.

If you press <, you can move back to the

left.

3 Repeat steps 1 and 2 to enter the

entire name.

5 To return to normal play mode, press

(ENTER).

Tips

• Simply overwrite or enter “ ” to correct or erase a

name.

• There is another way to start labeling a CD: Press

(LIST) for 2 seconds instead of performing steps 2

and 3. You can also complete the operation by

pressing (LIST) for 2 seconds instead of step 5.

• You can label CDs on a unit without the CUSTOM

FILE function if that unit is connected along with a

CD unit that has the function. The Disc Memo will be

stored in the memory of the CD unit with the

CUSTOM FILE function.

Note

Repeat/shuffle play is suspended until the Name Edit

is complete.

Viewing the Disc Memo

As a display item, the Disc Memo always takes

priority over any original CD TEXT information.

Tip

To find out about other items that can be displayed,

see page 10.

Erasing the Disc Memo

1 Press (SOURCE) repeatedly to select

“CD.”

2 Press (MODE) repeatedly to select the

CD unit storing the Disc Memo.

3 Press (MENU), then press M or m

repeatedly until “Name Delete”

appears.

4 Press (ENTER).

The stored names will appear.

5 Press M or m repeatedly to select the

disc name you want to erase.

6 Press (ENTER) for 2 seconds.

The name is erased.

Repeat steps 5 and 6 if you want to erase

other names.

7 Press (MENU) twice.

The unit returns to normal play mode.

Notes

• When the Disc Memo for a CD TEXT disc is erased,

the original CD TEXT information is displayed.

• If you cannot find the Disc Memo you want to erase,

try selecting a different CD unit in step 2.

• If you have already erased all of the Disc Memo, the

unit returns to normal play mode in step 4.

To Press

View (DSPL) during CD/CD

TEXT disc playback

Locating a disc by name

— List-up (For a CD unit with the CD TEXT/

CUSTOM FILE function, or an MD unit)

You can use this function for discs that have been

assigned custom names*

or for CD TEXT

discs*

*1 Locating a disc by its custom name: when you

assign a name for a CD (page 12) or an MD.

*2 Locating discs by the CD TEXT information: when

you play a CD TEXT disc on a CD unit with the CD

TEXT function.

1 Press (LIST).

The name assigned to the current disc appears

in the display.

2 Press M or m repeatedly until you find

the desired disc.

3 Press (ENTER) to play the disc.

Note

Some letters cannot be displayed (exception: the

letters stored by Disc Memo).

Radio

The unit can store up to 6 stations per band

(FM1, FM2, FM3, AM1, and AM2).

Caution

When tuning in stations while driving, use Best

Tuning Memory to prevent accidents.

Storing stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals within the selected band, and stores them

in the order of their frequency.

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press (MENU), then press M or m

repeatedly until “BTM” appears.

4 Press (ENTER).

A beep sounds when the setting is stored.

Notes

• If only a few stations can be received due to weak

signals, some number buttons will retain their former

settings.

• When a number is indicated in the display, the unit

starts storing stations from the one currently

displayed.

Receiving the stored stations

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (6))

on which the desired station is stored.

Tip

Press M or m to receive the stations in the order they

are stored in the memory (Preset Search function).

If preset tuning does not work

Press (S EEK) (<) or (SEEK) (,) to

search for the station (automatic

tuning).

Scanning stops when the unit receives a

station. Repeat until the desired station is

received.

Tips

• If automatic tuning stops too frequently, turn on the

Local Seek to limit seek to stations with stronger

signals. See “Changing the sound and display

settings” on page 17.

• If you know the frequency of the station you want to

listen to, press and hold < or , to locate the

approximate frequency, then press < or ,

repeatedly to fine adjust to the desired frequency

(manual tuning).

If FM stereo reception is poor

Select monaural reception mode

See “Changing the sound and display

settings” on page 17.

The sound improves, but becomes monaural

(“ST” disappears).

Note

If interference occurs, this unit will automatically

narrow the reception frequency to eliminate noise (IF

Auto function). In such cases, some FM stereo

broadcasts may become monaural while in the stereo

reception mode.

Tips

• To always hear FM stereo broadcasts in stereo, you

can change the IF Auto setting and widen the

frequency signal reception. See “Changing the

sound and display settings” on page 17. Note that

some interference may occur in this setting.

• If FM broadcasts are difficult to hear, set DSO to off

(page 19).

Storing only the desired

stations

You can manually preset the desired stations on

any chosen number button.

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press (SEEK) (<) or (SEEK) (,) to

tune in the station that you want to

store.

4 Press the desired number button ((1)

to (6)) for 2 seconds until “MEM”

appears.

The number button indication appears in the

display.

Note

If you try to store another station on the same number

button, the previously stored station will be erased.

Storing station names

— Station Memo

You can assign a name to each radio station and

store it in memory. The name of the station

currently tuned in appears in the display. You can

assign a name using up to 8 characters for a

station.

Storing the station names

1 Tune in a station whose name you

want to store.

2 Press (MENU), then press M or m

repeatedly until “Name Edit” appears.

3 Press (ENTER).

4 Enter the characters.

1 Press M*

repeatedly to select the

desired character.

A t B t C ... t 0 t 1 t 2 ... t +

t – t

... t *

t A

*1 For reverse order, press m.

*2 (blank space)

2 Press , after locating the desired

character.

If you press <, you can move back to the

left.

3 Repeat steps 1 and 2 to enter the

entire name.

5 Press (ENTER).

Tips

• Simply overwrite or enter “ ” to correct or erase a

name.

• There is another way to start storing station names:

Press (LIST) for 2 seconds instead of performing

steps 2 and 3. You can also complete the operation

by pressing (LIST) for 2 seconds instead of step 5.

Erasing the station name

1 During radio reception, press (MENU),

then press M or m repeatedly until

“Name Delete” appears.

2 Press (ENTER).

3 Press M or m repeatedly to select the

station whose name you want to

erase.

4 Press (ENTER) for 2 seconds.

The name is erased.

Repeat steps 3 to 4 if you want to erase other

names.

5 Press (MENU) twice.

The unit returns to normal radio reception

mode.

Note

If you have already erased all of the station names,

“NO Data” appears in step 4.

Tuning in a station through a

list

— List-up

1 During radio reception, press (LIST)

momentarily.

The frequency or the name assigned to the

current station appears in the display.

2 Press M or m repeatedly until you find

the desired station.

If no name is assigned to the selected station,

the frequency appears in the display.

3 Press (ENTER) to tune in the desired

station.

Other Functions

Adjusting the sound

characteristics

You can adjust the bass, treble, balance, fader,

and subwoofer volume.

1 Press (SOUND) repeatedly to select

the desired item.

Each time you press (SOUND), the item

changes as follows:

BASS (bass) t TREBLE (treble)

t BALANCE (left-right) t

FADER (front-rear)

SUB (subwoofer volume)

2 Adjust the level of a selected item by

pressing < or ,.

After 3 seconds, the display returns to the

normal play mode.

Note

Adjust within 3 seconds after selecting the item.

Quickly attenuating the

sound

(With the rotary commander or the card

remote commander)

Press (ATT).

“ATT on” appears in the display momentarily.

To restore the previous volume level, press

(ATT) again.

Tip

When the interface cable of a car telephone is

connected to the ATT lead, the unit decreases the

volume automatically when a telephone call comes in

(Telephone ATT function).

Changing the sound and

display settings

— Menu

The following items can be set:

Set up

• Clock Adjust (page 8)

• Beep — to turn the beeps on or off.

• AUX-A (page 21) — to turn the AUX source

display on or off.

Display

• Clock (Clock Information) — to display the

clock and the play mode at the same time (on).

• A.IMG (Auto Image) (page 20) — to step

through the display images of one or all display

modes.

• Demo (Demonstration) — to turn the

Demonstration mode on or off.

– Select “on” to activate Demo display.

– Select “off” to deactivate the Demonstration

mode.

• Info (Display Information) — to display the

display items (depending on the source, etc.) at

the bottom of the display while a display image

is displayed:

– Select “on” to display the display items, and

by pressing (DSPL) , the display item will

change.

– Select “off” to not display any display items.

• Dimmer — to change the brightness of the

display.

– Select “Auto” to dim the display only when

you turn the lights on.

– Select “on” to dim the display.

– Select “off” to deactivate the Dimmer.

• Contrast* — to adjust the contrast if the

indications on the display are not recognizable

because of the unit’s installation position.

• BlackOut — to blacken the display, while the

operation mode is on.

– Select “on” to black out the indications.

The indications will disappear, but the unit

will react if you press any button.

– Select “off” to brighten the display.

• A.Scroll (Auto Scroll)

– Select “on” to scroll all automatically

displayed names exceeding 12 characters.

– When Auto scroll is set to off and the disc/

track/album is changed, the disc/track/album

name or ID3 tag does not scroll.

* “Contrast” appears only in the sub display window.

You can adjust the contrast of the sub display

window only.

continue to next page t

Sound

• HPF (High pass filter)

– to select the cut-off frequency to “78Hz,”

“125Hz,” or “off.”

• LPF (Low pass filter)

– to select the cut-off frequency to “78Hz,”

“125Hz,” or “off.”

• Loudness

– to enjoy bass and treble even at low volumes.

The bass and treble will be reinforced.

• AUX Level (page 21) — to adjust the volume

level of connected auxiliary equipment.

Play Mode

• Local on/off (Local seek mode) (page 14)

– Select “on” to only tune into stations with

stronger signals.

• Mono on/off (Monaural mode) (page 14)

– Select “on” to hear FM stereo broadcast in

monaural. Select “off” to return to normal

mode.

• IF Auto/Wide (page 14)

1 Press (MENU).

To set Demo, press (OFF), then press

(MENU).

To set A.Scroll, press (MENU) during CD/

MD playback.

2 Press M or m repeatedly until the

desired item appears.

3 Press < or , to select the desired

setting (Example: “on” or “off”).

4 Press (ENTER).

After the mode setting is completed, the

display returns to normal play mode.

Note

The displayed item will differ depending on the source.

Tip

You can easily switch among categories by pressing M

or m for 2 seconds.

Setting the equalizer (EQ7)

You can select an equalizer curve for 7 music

types (Xplod, VOCAL, CLUB, JAZZ,

NEWAGE, ROCK, CUSTOM), and OFF

(equalizer off).

You can store and adjust the equalizer settings

for frequency and level.

You can store the EQ7 setting for each source.

Selecting the equalizer curve

1 Press (SOURCE) to select a desired

source.

2 Press (EQ7) repeatedly to select a

desired equalizer curve.

Each time you press (EQ7), the item

changes.

To cancel the equalizing effect, select “OFF.”

After 3 seconds, the display returns to the

normal play mode.

Adjusting the equalizer curve

1 Press (MENU).

2 Press M or m repeatedly until “EQ7

Tune” appears, then press (ENTER).

3 Press < or , to select the desired

equalizer curve, then press (ENTER).

Each time you press < or ,, the item

changes.

4 Select the desired frequency and level.

1 Press < or , to select the desired

frequency.

Each time you press < or ,, the

frequency changes as follows:

62Hz y 157Hz y 396Hz y 1.0kHz

y 2.5kHz y 6.3kHz y 16kHz

2 Press M or m to adjust the desired

volume level.

The volume level is adjustable by 1 dB

steps from –10 dB to +10 dB.

To restore the factory-set equalizer curve,

press (ENTER) for 2 seconds.

5 Press (ENTER).

After the effect setting is complete, the

display returns to the normal play mode.

Setting the Dynamic

Soundstage Organizer (DSO)

If your speakers are installed into the lower part

of the doors, the sound will come from below

and may not be clear.

The DSO (Dynamic Soundstage Organizer)

function creates a more ambient sound as if there

were speakers in the dashboard (virtual

speakers).

You can store the DSO setting for each source.

1 Press (SOURCE) to select a desired

source.

2 Press (DSO) to select “1, 2, 3” or

“OFF”.

To cancel the DSO mode, select “DSO OFF.”

After 3 seconds, the display returns to the

normal play mode.

Notes

• Depending on the type of car interior or type of

music, DSO may not have a desirable affect.

• If FM broadcasts are difficult to hear, set DSO to off.

Selecting the display mode

and display image

You can select from 3 different display modes.

You can also select various display images in

Wallpaper mode (1-2), Spectrum analyzer mode

(1-5) and Movie mode (1-3).

Note

The default setting of Auto Image mode is “A.IMG-All.”

After a few seconds of releasing (IMAGE), the unit

returns to Auto Image mode. If you want to display a

display image, set to “A.IMG-off” (page 20).

Selecting the display image

1 Press (SOURCE) to select a desired

source.

2 Press (IMAGE) on the unit repeatedly

to select the desired display image.

Example: Wallpaper mode

Each time you press (IMAGE), the display

image changes as follows:

Wallpaper mode 1-2 t Spectrum

analyzer mode 1-5 t Movie mode 1-3

t normal play mode

To cancel this mode, select normal play mode.

Selecting the Auto Image mode

Auto Image mode automatically steps (every 10

seconds) through the display images of one or all

display modes as follows:

• A.IMG-All — to shuffle repeatedly the display

images in all display modes.

• A.IMG-Sa — to step repeatedly through the

display images of Spectrum analyzer mode.

• A.IMG-Movie — to step repeatedly through

the display images of Movie mode.

1 Press (SOURCE) to select a desired

source.

2 Press (MENU).

3 Press M or m repeatedly until “A.IMG”

appears.

4 Press < or , repeatedly to select the

desired setting.

To cancel Auto Image mode, select “A.IMG-off.”

Tips

• During Auto Image mode, if you press (IMAGE), the

display image will change. After a few seconds of

releasing (IMAGE), this unit returns to the former

Auto Image setting.

• If you set Info mode to off, no display items will

appear (page 17).

La page charge ...

Sony CDX-M800 Le manuel du propriétaire

Marque: Sony

Modèle: CDX-M800

Catégorie: Lecteur CD

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Sony CDX-M800 Owner's manual
español: Sony CDX-M800 El manual del propietario

Sony CDX-M800 Le manuel du propriétaire

Sony CDX-M800 Le manuel du propriétaire

dans d''autres langues

Documents connexes