Wincor Nixdorf BEETLE /Fusion Comp. Guide d'installation

Marque: Wincor Nixdorf

Modèle: BEETLE /Fusion Comp.

Taper: Guide d'installation

Installation Guide

BEETLE /Fusion

Compact

The reproduction, transmission or use of this document or its contents is not

permitted without express authority.

Offenders will be liable for damages.

All rights, including rights created by patent grant or registration of a utility model

or design, are reserved.

Delivery subject to availability; technical modifications possible.

BEELTE /FUSION COMPACT

Installation Guide

Edition Mar 2011

Contents

BEETLE /FUSION COMPACT – Installation Guide 01750171532 C

Contents

Manufacturer’s Certification......................................................1

Tested Safety...............................................................................................1

FCC-Class A Declaration.............................................................................2

BSMI (EMC for Taiwan) ...............................................................................2

Introduction.................................................................................1

Symbols used in this guide...........................................................................1

Important safety precautions........................................................................2

Installation notes ..........................................................................................2

General safety precautions ..........................................................................2

Planning the Installation............................................................4

Device dimensions.......................................................................................4

Device dimension from side view.............................................................5

Device dimension from top view ..............................................................6

Required operation space ............................................................................7

Installation site requirements........................................................................8

Installation...................................................................................9

Removing the packaging..............................................................................9

Installing RAM............................................................................................10

Installing harddisk.......................................................................................12

Connecting the power cord ........................................................................14

Connecting the serial connector.................................................................20

Appendix ...................................................................................23

Technical data............................................................................................23

AC Power Adapter......................................................................................24

Power Cord Selection.................................................................................25

I/O connection ports...................................................................................26

Manufacturer’s Certification

01750171532 C BEETLE /FUSION COMPACT – Installation Guide 1

Manufacturer’s Certification

The device complies with the requirements of the

2004/108/EC (EMC Directive) and 2006/95/EC (Low

Voltage Directive).

Therefore, you will find the CE mark on the device or packaging.

Tested Safety

The BEETLE /Fusion has been provided with the symbol

for “Tested Safety”.

In addition, the device has received the UL symbol and

cUL symbol.

Manufacturer’s certification

2 BEETLE /FUSION COMPACT – Installation Guide 01750171532 C

FCC-Class A Declaration

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not in-stalled and used in

accordance with the instruction manual, may cause harmful interference to radio

communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

Le présent appareil numérique ne génère pas de bruits radioélectriques

dépassant les limites applicable aux appareils numériques de la “Class A”

prescrites dans le Règlement sur le brouillage radioélectrique édicté par le

ministère des Communications du Canada.

BSMI (EMC for Taiwan)

The device complies with the requirements of the BSMI

(Bureau of Standards, Metrology and Inspection, Ministry of

Economic Affairs) directive CNS14348 with regard to

“Electromagnetic compatibility” with the limits for a Class B

product.

Introduction

01750171532 C BEETLE /FUSION COMPACT – Installation Guide 1

Introduction

This installation guide provides you with the information you require to

install the Beetle /Fusion system.

Symbols used in this guide

- Text following this mark represents an item in a list.

“ “ Text in quotation marks contains references to other

chapters or sections in this document.

● Paragraphs following this symbol are actions to be

performed in the specific order.

Text following this symbol has to be given special attention

in order to avoid damage or injury.

This symbol identifies paragraphs which contain general

notes to facilitate use of the device and help avoid operating

errors.

WARNING

NOTE





Introduction

2 BEETLE /FUSION COMPACT – Installation Guide 01750171532 C

Important safety precautions

Please read the following notes carefully before doing any work on

the device.

Installation notes

- When installing the device and/or doing any work on it, make sure

that it is disconnected from the power.

General safety precautions

This device complies with the relevant safety regulations for information

processing equipment.

- Note the warning and information labels on the device.

- The device is equipped with a safety-tested power cable, which

must be connected only to a grounded outlet.

- Always hold the plug when removing the power cable. Never pull

the cable itself.

- Have damaged power cables replaced immediately.

- The lithium battery must be disposed of in accordance with local

regulations for special waste.

- If the display element is damaged and the liquid crystal solution

leaks out onto your hands or clothing, please wash your hands or

clothing immediately under running water for at least 15 minutes,

using soap or alcohol. If the liquid comes into contact with your

eyes, consult a medical doctor immediately.

WARNING

Introduction

01750171532 C BEETLE /FUSION COMPACT – Installation Guide 3

- Make sure that there is always free access to sockets used or to the

electrical circuit-breakers of the house installation.

- In case of an emergency (e.g. damaged cabinets, control or power

cables, liquids or foreign objects in the device), switch off the device

immediately and inform the customer service responsible for you.

- During the thunderstorm, data transmission lines must not be

connected or disconnected.

- Only use accessories and extension components that have been

approved by us. Nonobservance can result in damage to the system

or violations of regulations concerning safety, radio interference and

ergonomical requirements.

- To clean the device only use cleaning agents approved by Wincor

Nixdorf International GmbH.

Repairs

Repair work may only be carried out by authorized personnel.

Unauthorized opening of the device or repair work carried out

improperly could result in considerable danger to the user.

In case of noncompliance, Wincor Nixdorf International GmbH

excludes all liability.

WARNING

Planning the Installation

4 BEETLE /FUSION COMPACT – Installation Guide 01750171532 C

Planning the Installation

This chapter provides you with the information you need to prepare for

the installation of the system.

Device dimensions

All dimensions are specified in millimetres. The views of the systems are

not drawn to scale.

Planning the Installation

01750171532 C BEETLE /FUSION COMPACT – Installation Guide 5

Device dimension from side view

Planning the Installation

6 BEETLE /FUSION COMPACT – Installation Guide 01750171532 C

Device dimension from top view

Planning the Installation

01750171532 C BEETLE /FUSION COMPACT – Installation Guide 7

Required operation space

Reservation of minimum space is required to ensure proper ventilation during

the operation of the device.

Reserve at least 50 mm of operation space from the side of the device to its

nearest barrier / wall.

50 mm 50 mm

Wall

BEETLE /FUSION

System

WARNING

Planning the Installation

8 BEETLE /FUSION COMPACT – Installation Guide 01750171532 C

Installation site requirements

The installation area must be flat leveled.

When choosing the installation site, make sure that

- the system is sheltered indoor

- If this system is taken from a cold environment into the operating

room, moisture condensation may form. The system must be

absolutely dry before being put into service; an acclimatization

period of at least two hours must therefore be observed.

- No cascading of power cables

The system needs to be installed on the table surface and not on the

floor.

If necessary, appropriate arrangements must be made.

Installation

01750171532 C BEETLE /FUSION COMPACT – Installation Guide 9

Installation

This chapter describes the steps to be taken to install the system.

All dimensions are specified in millimetres. The diagrams are not drawn

to scale.

Contact the person in charge of planning the installation to verify that all

preparations have been performed completely and professionally and

that none of the required power and data cables are missing.

Removing the packaging

 Remove the packing material of the system or the modules ordered.

 Dispose of the packaging which is no longer needed according to

the regulations of your country.

Installation

10 BEETLE /FUSION COMPACT – Installation Guide 01750171532 C

Installing RAM

 Remove the screw to access the RAM slot (see picture below).

remove

screw

Installation

01750171532 C BEETLE /FUSION COMPACT – Installation Guide 11

 Insert the RAM into the RAM slot and make sure it is engaged

properly on the slot (see picture below).

 Close the cover and tighten the screws.

RAM

slot

Ensure that the RAM is

inserted in this orientation

Installation

12 BEETLE /FUSION COMPACT – Installation Guide 01750171532 C

Installing harddisk

 Remove the screw to access the harddisk slot (see picture below).

Remove

screws

Installation

01750171532 C BEETLE /FUSION COMPACT – Installation Guide 13

 Insert the harddisk into the harddisk slot and make sure it is

engaged properly on the slot (see picture below).

 Close the cover and tighten the screws.

Harddisk slot

Ensure that the harddisk is

inserted in this orientation

Installation

14 BEETLE /FUSION COMPACT – Installation Guide 01750171532 C

Connecting the power cord

Ensure that the AC power point is switched off before inserting the

specified power cord into the AC power point.

 To connect the system to the power source, plug the connector of

the power adapter into the power connector at the rear of the

system.

 To assess to the rear of the system, press the left and right edge of

the plastic cover to unlatch the cage of the cover (see picture

below).

WARNING

Press the edge of

plastic cover to

unlatch

La page charge ...

Wincor Nixdorf BEETLE /Fusion Comp. Guide d'installation

Marque: Wincor Nixdorf

Modèle: BEETLE /Fusion Comp.

Taper: Guide d'installation

Télécharger le PDF

rapport

dans d''autres langues

English: Wincor Nixdorf BEETLE /Fusion Comp. Installation guide

Wincor Nixdorf BEETLE /Fusion Comp. Guide d'installation

Wincor Nixdorf BEETLE /Fusion Comp. Guide d'installation

dans d''autres langues

Documents connexes

Autres documents