Whirlpool WFW9620HC Mode d'emploi

Catégorie
Machines à laver
Taper
Mode d'emploi

Ce manuel convient également à

Use and Care Guide
Guide d’utilisation et d’entretien
Para obtener acceso al
Manual de uso y
cuidado en español, o para
obtener información adicional
acerca de su producto, visite:
www.whirlpool.com
Front-Loading Automatic Washer
Laveuse automatique à chargement frontal
If you have any problems or questions, visit us at www.whirlpool.com.
Pour tout problème ou toute question, consulter www.whirlpool.ca.
W11339488B
W11339489B – SP
Designed to use only HE
High Efciency detergents.
Conçue pour l’utilisation
d’un détergent haute
efcacité seulement.
Connect your Smart Washer with your mobile device
at www.whirlpool.com/connect (in Canada, www.whirlpool.ca/connect).
Connecter votre laveuse intelligente avec votre appareil mobile
à www.whirlpool.ca/connect.
2
WASHER SAFETY
Table of Contents
WASHER SAFETY ........................................................ 2
ACCESSORIES ............................................................. 4
OPERATING INSTRUCTIONS ..................................... 5
Control Panel and Features ................................... 5
Cycle Guide ........................................................... 6
Choosing the Right Detergent ................................9
Using the Dispensers ............................................ 10
Using Your Washer ...............................................11
Washer Maintenance ............................................16
INTERNET CONNECTIVITY GUIDE ...........................21
TROUBLESHOOTING .................................................22
CONNECTED APPLIANCE REGULATORY
NOTICES .....................................................................32
WARRANTY ................................................................. 34
ASSISTANCE OR SERVICE ........................ Back Cover
Table des matières
SÉCURITÉ DE LA LAVEUSE ........................................ 35
ACCESSOIRES .............................................................. 36
INSTRUCTIONS D’UTILISATION ................................. 37
Tableau de commande et caractéristiques ............. 37
Guide de programmes ............................................ 38
Choix du détergent approprié .................................. 43
Utilisation des distributeurs ...................................... 44
Utilisation de la laveuse............................................ 45
Entretien de la laveuse ............................................. 51
GUIDE DE CONNEXION INTERNET ............................. 56
DÉPANNAGE .................................................................. 57
AVIS D’APPLICATION DE LA RÉGLEMENTATION
DE LA CONNEXION DES ÉLECTROMÉNAGERS ........ 68
GARANTIE ...................................................................... 70
ASSISTANCE OU SERVICE ................ Couverture arrière
3
4
ACCESSORIES
INSTALLATION & MAINTENANCE
ACCESSORIES
FACTORY CERTIFIED PARTS – these three
words represent quality parts and accessories
designed specically for your appliance.
Time tested engineering that meets
our strict quality specications.
FACTORY CERTIFIED PARTS
Accessories designed for your appliance:
Customize your new washer with the following genuine Whirlpool
accessories. For more information on options and ordering,
call 1-866-698-2538 or visit us at: www.whirlpoolparts.com.
In Canada, call 1-800-688-2002 or visit us at www.whirlpool.ca.
15" Pedestal
Color-matched pedestals
raise the washer to a more
comfortable working height.
The large drawer provides
convenient storage.
5
Control Panel and Features
POWER BUTTON
Touch to power up the washer.
HOME BUTTON
Touch this button and the LCD screen will show the
home screen, where you can select your cycle, settings,
and options.
FAVORITES BUTTON
Stores and accesses your favorite cycles and a history of
your recently run cycles.
LCD SCREEN
Use this screen to select cycle, settings, options, etc.
REMOTE ENABLE BUTTON
Download the Whirlpool
®
and follow the instructions to
connect your washer to your home Wi-Fi network. You may
also visit www.whirlpool.com/connect. In Canada, visit
www.whirlpool.ca/connect. After connecting to WiFi, touch
the REMOTE ENABLE button any time you want to use the
app. Opening the door or touching this button again
disables ‘Remote Enable’ mode.
TOOLS BUTTON
Touch this button to access the tools screen. For more
information, see “Using Your Washer” Step 11.
START/PAUSE BUTTON
Touch and hold for 3 seconds to start, or touch to pause a
cycle. After pausing a cycle, press and hold for 3 seconds
again to resume a cycle. When you start a cycle, the door
will lock, the washer will sense the load size, and the
wash cycle will begin. As the wash cycle begins, you will
notice the ‘Add Garment’ prompt on the machine. See the
‘Unlocking the door to add garments’ section for more
information on what this means.
DISPENSERS
Load & Go
Bulk Dispenser
The Load & Go
dispenser gives you the convenience
of not having to add HE detergent and fabric softener to the
wash load every time. It also determines the best time and
amount to add the detergent to the load. See the “Using the
Dispensers” section for information on using the dispenser
drawer.
1
2
4
3
5
7
6
7
7
8
1 3
2
6
5
74
Temperature
WARM
Soil Level
LOW
Spin Speed
EXTRA FAST
What to Wash
REGULAR
How to Wash
NORMAL
3:15
4:28
2-Liter Bulk Liquid High Efficiency (HE) detergent
dispenser
This bulk dispenser holds up to 67.6 oz (2 L) of liquid
HE detergent.
1-Liter Bulk Liquid High Efficiency (HE) detergent/
fabric softener dispenser
This bulk dispenser holds up to 33.8 oz (1 L) of liquid
HE detergent or liquid fabric softener.
Each dispenser holds enough detergent or fabric
softener for many loads of laundry. Each adds the
appropriate quantity to the wash load at the proper time.
See the “Using the Dispensers” section for information
on using the dispenser.
IMPORTANT: Do not use chlorine bleach or powdered
detergent in the bulk dispenser. Powdered detergent
and bleach must be added to the single load dispenser.
See the “Using the Washer” section.
Single-load dispenser drawer
The single-load dispenser drawer gives you the
convenience of adding HE detergent, liquid chlorine
bleach, and liquid fabric softener to the wash load at
the proper time. See the “Using the Dispensers” section
for information on using the dispenser drawer.
High Efficiency (HE) detergent compartment
This compartment holds liquid or powdered HE
detergent for your main wash cycle, and automatically
dispenses detergent in the cycle.
Liquid fabric softener compartment
This compartment holds liquid fabric softener. It
automatically dispenses liquid fabric softener at the
optimum time in the cycle.
Liquid chlorine bleach compartment
This compartment automatically dilutes and dispenses
liquid chlorine bleach at the optimum time during the
rst rinse after the wash cycle. It cannot dilute powdered
bleach.
A
B
C
D
E
D
E
C
OPERATING INSTRUCTIONS
NOTE: The control panel features a sensitive surface that responds to a light touch of your nger. To ensure your selections are
registered, touch the control panel with your ngertip, not your ngernail.
B
A
6
Cycle Guide
This washer has a unique user interface to help you select the best wash cycle for your load. The “What to Wash/How to Wash” layout
guides you to the optimal cycle in two easy steps:
First, determine what items are in the load that you are trying to wash. Use that to guide your “What to Wash” selection. Then
determine how you want the washer to wash them and select the appropriate “How to Wash” selection. Selecting “What to Wash” will
automatically select a default “How to Wash selection,” so selecting a “How to Wash” is optional. See chart below for more details.
Settings and options shown in bold are default settings for that wash cycle. For best fabric care, choose the cycle, options, and
settings that best t the load being washed. Always read and follow fabric care labels and laundry product instructions. Avoid tightly
packing the washer. The washer will not rinse well or spin correctly if tightly packed. Not all settings are available with each cycle, and
some options cannot be used together.
What Items Do You Want to Wash?
“What to Wash”
Cycle Selection:
Cottons, linens, and mixed garment loads Regular
Bright- or dark-colored cottons, linens, and mixed loads Colors
White fabrics/garments Whites
Sturdy towels and washcloths Towels
No-iron fabrics, dress shirts/pants, synthetics, sheer/lacy garments Delicates
Large items such as small comforters, sleeping bags, jackets, and washable rugs Bulky Items
How Do You Want to Wash Them?
“How to Wash”
Cycle Selection:
Regular/normal Normal
Fast Quick
With fewer wrinkles Wrinkle Control
Intense cleaning Heavy Duty
Gentle cleaning with cold water Cold Wash
Eliminate 99.9% of three common household bacteria Sanitize*
What
How
Basic Options Additional Options
Temperature Spin Speed Soil Level Pre-Soak Steam Clean Extra Rinse FanFresh
®
Regular Normal Cold
Cool
Warm
Hot
Extra Hot
Off
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Quick Cold
Cool
Warm
Hot
Extra Hot
Off
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Wrinkle
Control
Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Heavy Duty Cold
Cool
Warm
Hot
Extra Hot
Off
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Cold Wash Cold
Cool
Warm
Hot
Extra Hot
Off
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X
Sanitize Extra Hot Off
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X
Colors Normal Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
* This cycle eliminates 99.9% of the most common bacteria found in clothes, sheets, and towels. The extra hot wash temperature ensures sanitization.
Check recommended wash temperature of your items. Bacteria tested were K. pneumonia, P. aureginosa, and S. aureus.
7
What
How
Basic Options Additional Options
Temperature Spin Speed Soil Level Pre-Soak Steam Clean Extra Rinse FanFresh
®
Colors (cont.) Quick Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Wrinkle
Control
Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Heavy Duty Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Cold Wash Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X
Sanitize Extra Hot Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X
Whites Normal Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Quick Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Wrinkle
Control
Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Heavy Duty Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Cold Wash Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X
Sanitize Extra Hot Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X
Towels Normal Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Quick Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Wrinkle
Control
Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Heavy Duty Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
8
What
How
Basic Options Additional Options
Temperature Spin Speed Soil Level Pre-Soak Steam Clean Extra Rinse FanFresh
®
Towels (cont.) Cold Wash Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X
Sanitize Extra Hot Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X
Delicates Normal Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Quick Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Wrinkle
Control
Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Heavy Duty Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Cold Wash Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X
Sanitize Extra Hot Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X
Bulky Items Normal Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Quick Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Wrinkle
Control
Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Heavy Duty Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X X
Cold Wash Cold
Cool
Warm
Hot
Extra Hot
Off
Slow
Medium
Fast
Extra Fast
Light
Normal
Heavy
X X X
9
Choosing the Right Detergent
Use only High Efciency detergents. The package will be marked
“HE” or “High Efciency.” Low-water washing creates excessive
sudsing with a non-HE detergent. Using non-HE detergent
will likely result in longer cycle times and reduced rinsing
performance. It may also result in component malfunction and,
over time, buildup of mold or mildew. HE detergents should be
low-sudsing and quick-dispersing to produce the right amount
of suds for the best performance. They should hold soil in
suspension so it is not redeposited onto clean clothes. Not all
detergents labeled as High Efciency are identical in formulation
and their ability to reduce suds. For example, natural, organic,
or homemade HE detergents may generate a high level of suds.
Always follow the detergent manufacturer’s instructions to
determine the amount of detergent to use.
Use only High
Efciency (HE)
detergent.
About Detergent Concentration
Today’s liquid HE detergents are concentrated. Most brands of
concentrated HE detergent will show the level of concentration
on the bottle.
However, if the detergent bottle does not give the concentration,
it can be easily calculated. Just divide the package size in uid
ounces by the number of loads. Then refer to the chart below
to nd the concentration.
Set the concentration level setting on the washer by using
the Tools button (see Step 12 in “Using Your Washer). If you do
not get your desired cleaning results, set the concentration level
to a lower concentration number. If you have excess suds, set the
concentration level to a higher concentration number.
Concentration Number of ounces ÷ number of loads
2X 1.5–2.49 (44.4 mL–73.6 mL)
3X 0.9–1.49 (26.6 mL–44.1 mL)
4X 0.7–0.89 (20.7 mL–26.3 mL)
5X 0.5–0.69 (14.8 mL–20.4 mL)
6X 0.3–0.49 (8.9 mL–14.5 mL)
8X < 0.29 (8.6 mL)
10
Using the Dispensers
1. For automatic dispensing, open the bulk dispenser drawer
using the handle at the base of the washer. For a single load,
open the single-load dispenser drawer at the top left corner
of the washer and disable the Load & Go
option.
2. Add laundry products as described below.
3. Slowly close the dispenser drawer. Make sure it is
completely closed.
NOTES:
A small amount of water may remain in the single load
dispenser from the previous wash cycle. This is normal.
See “About Detergent Concentration” for information on
detergent concentration.
When detergent in the bulk dispenser is running low, the
display will show the detergent level (Low).
Add single-dose and Oxi-type boosters to the drum before
loading items. See the “Using Your Washer” section.
Adding HE detergent to dispenser
Powdered detergent:
Lift the selector to the high
position. Add directly to the
compartment.
Load & Go
bulk dispenser
Adding detergent for a single load
IMPORTANT:
Disable Load & Go
dispenser(s) as desired (see Step
11 in “Using Your Washer”).
Do not add single-dose laundry packet to dispenser
drawer.
HE detergent
compartment
Use only High
Efciency (HE)
detergent.
Liquid detergent:
Push down the selector
to the low position. Add
directly to the compartment.
Use only High Efciency (HE)
liquid detergents. The bulk dispensers
will hold about 67.6 oz (2 L) or
33.8 oz (1 L) of liquid HE
detergent, depending on dispenser,
or enough for many loads of laundry.
To Fill Bulk Dispeners:
Open the dispenser drawer by pulling on the handle at the
base of the washer. If desired, the bulk dispensers can be
completely removed from the drawer.
Locate the Load & Go
bulk
dispenser. Gently pull up on the
tab located on the bulk dispenser
lid to lift the ll door.
Fill to the “MAX” line (see
illustrations at right) with HE
liquid detergent or liquid fabric
softener (1-liter dispenser only).
Close ll door. It will click into place.
Make sure the concentration setting
is correct (see the “Choosing the
Right Detergent” section).
It is recommended that you rinse
out the Load & Go
containers when
relling, when changing detergent
types or concentrations, or when
the washer will not be used for an
extended period.
For instructions
on cleaning the dispenser cartridge,
see the “Washer Care” section.
For instructions on changing
detergent concentration, see
“Using Your Washer, Step 11.
Use only High Efciency
(HE) detergent.
Selector
Pour a measured amount of HE detergent into detergent
compartment. For powdered detergent, lift the selector
to the high position. For liquid detergent, push down the
selector to the low position.
Do not overll; adding too much detergent may cause
detergent to be dispensed into the washer too early.
“MAX” line
Tab
11
Single-dose laundry packets, Oxi-type boosters, color-safe
bleach, or scented crystals can be added to the drum prior to
adding laundry. When using single-dose laundry packets, make
sure that the bulk dispenser is disabled or off (see Step 11).
NOTE: Always follow manufacturer’s instructions.
Using Your Washer
Sort items by recommended cycle, water temperature,
and colorfastness. Separate heavily soiled items from lightly
soiled. Separate delicate items from sturdy fabrics. Treat
stains promptly and check for colorfastness by testing stain
remover products on an inside seam.
IMPORTANT:
n Empty pockets. Loose change, buttons, or any small
object can plug pumps and may require a service call.
n Close zippers, fasten hooks, tie strings and sashes,
and remove non-washable trim and ornaments.
n Mend rips and tears to avoid further damage to items
during washing.
n Turn knits inside out to prevent pilling. Separate lint-takers
from lint-givers. Synthetics, knits, and corduroy fabrics will
pick up lint from towels, rugs, and chenille fabrics.
n Do not dry garments if stains remain after washing,
because heat can set stains into fabric.
n Always read and follow fabric care labels and laundry
product instructions. Improper usage may cause damage
to your garments.
1. Sort and prepare your laundry
First wash cycle without laundry
Before washing clothes for the rst time, set up the Load & Go
bulk dispenser or add detergent to the single-dose dispenser
(see the “Using the Dispensers” section). Choose the Regular
(what to wash) and Quick (how to wash) cycle and run it without
clothes. Use only HE detergent. This initial cycle serves to ensure
the interior is clean.
Place a load of sorted items loosely in the washer. Items need
to move freely for best cleaning and to reduce wrinkling and
tangling. Close the washer door by pushing it rmly until the
latch clicks.
n Push load fully into the washer. Make sure no items are
resting on the rubber seal to avoid trapping them between
the seal and the door window.
n Mix large and small items and avoid washing single items.
Load evenly.
n Wash small items in mesh garment bags. For multiple
items, use more than one bag and ll bags equally.
3. Load laundry into washer
2. Add laundry products, if desired
12
4. Add HE detergent
Liquid HE detergent
bulk dispenser
Adjust the selector, based on type of HE detergent used
(either liquid or powdered). Add a measured amount of
detergent directly into the detergent compartment. See
“Using the Dispensers” section. Disable the Load & Go
dispenser(s).
Single load
powdered
HE detergent
Single load
liquid
HE detergent
Load & Go
Bulk Dispenser
Single-Load Dispenser Drawer
If the bulk dispenser already contains enough detergent
to wash your load, ensure the Load & Go
dispenser you
want to use is enabled as described in Step 11. If you need
to add detergent to the bulk dispenser, see the “Using the
Dispensers” section.
OR
NOTE: Do not add single-dose laundry packets, Oxi-type
boosters, color-safe bleach, or scented crystals to dispensers.
They will not dispense correctly.
Pour a measured amount of liquid fabric softener into liquid
fabric softener compartment. Always follow manufacturer’s
directions for correct amount of fabric softener, based on
your load size. Disable the 1-Liter Load & Go
dispenser if
not used to dispense detergent.
Fabric softener is always dispensed in the last rinse, even
if Extra Rinse is selected.
IMPORTANT: Do not overll, dilute, or use more than
the manufacturer-recommended quantity of fabric softener.
Do not ll past the “MAX” line. Overlling dispenser will
cause fabric softener to immediately dispense into washer.
Do not spill or drip any fabric softener onto the clothes.
Do not use liquid fabric softener dispenser balls in this
washer. They will not dispense correctly.
Do not use fabric softener sheets.
5. Add liquid fabric softener, if desired
Liquid HE detergent/
fabric softener
bulk dispenser
Load & Go
Bulk Dispenser
Single-Load Dispenser Drawer
If the bulk dispenser already contains enough fabric softener
for your load, ensure the 1-Liter Load & Go
dispenser
is enabled as described in Step 11. If you need to add
fabric softener to the bulk dispenser, see the “Using the
Dispensers” section.
OR
13
9. Adjust temperature, spin speed, and
soil level if desired
To adjust temperature:
From the home screen, touch the “Temperature” area of
the screen to show the Temperature settings available for
the cycle/program chosen in Step 8. Touch the desired
setting and touch OKAY to conrm that setting.
The recommended wash temperature is preset for each cycle.
Some preset temperatures can be changed. You may select
a different wash temperature based on the level of soil and
type of fabric being washed. For best results, use the warmest
wash water safe for your fabric, following the garment label
instructions. All wash temperatures feature a cold rinse.
To adjust spin speed:
Touch the “Spin Speed” area of the screen to show the
Spin Speed settings available for the cycle/program chosen
in Step 8. Touch the desired setting and touch OKAY to
conrm that setting.
The recommended spin speed is preset for each cycle. Some
preset speeds can be changed.
Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
Slower spin speeds reduce wrinkling, but will leave your
load more damp.
7. Touch POWER button to turn on
washer
8. Select wash program/cycle
From the home screen, touch the “What to Wash” area of the
screen to select the program that best matches the items you
want to wash. You may need to scroll down with your nger to
see all of the selections. Touch the desired program to return
to the home screen.
Touch the “How to Wash” area of the screen to select the
program that best matches the method that you would like
to wash those items. You may need to scroll down with your
nger to see all of the selections. Touch the desired program
to return to the home screen.
Touch until the indicators turn on.
Temperature
WARM
Soil Level
LOW
Spin Speed
EXTRA FAST
What to Wash
REGULAR
How to Wash
NORMAL
3:15
4:28
Add liquid chlorine bleach to the bleach compartment.
Do not overll, dilute, or use more than 23 cup (165 mL).
Do not use color-safe bleach or Oxi in the same cycle with
liquid chlorine bleach.
IMPORTANT:
Always measure liquid chlorine bleach. Use a measuring
cup with a pour spout; do not guess.
Do not ll beyond the “MAX” level. Overlling could
cause garment damage.
Do not use thickened, easy-pour, or no-splash bleach
when running the Clean Washer with affresh
®
cycle as
excess suds may occur.
Do not add liquid chlorine bleach to the bulk dispenser.
Slowly close dispenser drawers. Make sure the drawers
are closed completely.
6. Add liquid chlorine bleach to
single-load dispenser, if desired
Not all options and settings are available with all programs/cycles.
See “Cycle Guide” for available options and settings.
Temperature
WARM
Soil Level
LOW
Spin Speed
EXTRA FAST
What to Wash
REGULAR
How to Wash
NORMAL
3:15
4:28
14
10. Select options, if desired
Not all options and settings are available with all programs/cycles.
See “Cycle Guide” for available options and settings.
From the home screen, touch the Options icon (at upper right
of screen) and the Options screen will show Soil Level, Extra
Rinse, Pre-Soak, FanFresh
®
,
Steam Clean, and Wrinkle Shield
selections. Previously selected “What to Wash” and “How to
Wash” options will be shown on the screen. Touch the screen for
each option to change its setting.
Extra Rinse Option
The Extra Rinse option provides an additional rinse to the
selected cycle.
Pre-Soak Option
The Pre-Soak option can be set for 30 min, 1 hr or 8 hrs.
FanFresh
®
Option
The FanFresh
®
option will periodically tumble the load after the
end of the cycle for up to 12 hours. Touch FAN FRESH to activate
this option. FanFresh
®
may be ended at any time by touching
the “X” on the touch screen to the right of the estimated time
remaining.
Steam Clean Option
The Steam Clean option adds additional soak and wash time
to many cycles to help remove tough stains, as well as a steam
boost for added cleaning power. An integrated heater helps to
maintain optimal wash temperatures. See the “Cycle Guide” for
cycles that allow the Steam Clean option.
11. Use Tools button to change
other settings, if desired
The Tools button gives access to many other settings, utility
cycles, preferences, and information. Touch the TOOLS button
to access the Tools screen, which contains the following
(you will need to scroll down with your nger to access
all of the selections):
Load & Go
Dispenser 1
Touch this icon to access:
Load & Go
Status Dispenser 1 and choose between:
n
Active
n
Disabled (1 Cycle)
n
Off (Permanently)
Detergent Concentration Dispenser 1 and choose between:
n
2X
n
3X
n
4X
n
5X
n
6X
n
8X
Load & Go
Dispenser 2
Touch this icon to access:
Load & Go
Status Dispenser 2 and choose between:
n
Active
n
Disabled (1 Cycle)
n
Off (Permanently)
Load & Go
Content Dispenser 2 and choose between:
n
Softener
n
Detergent
Once set at Detergent:
Set Concentration Dispenser 2 and choose between:
n
2X
n
4X
n
6X
n
8X
Control Lock
Touch this icon to lock the controls.
Swipe up to unlock.
Mute
Touch this icon to mute or unmute sounds.
Utility Cycles
Touch this icon to access the following utility cycles: Drain &
Spin and the Clean Washer with affresh
®
cycle. Touch the utility
cycle you wish to use and follow the screen prompts.
NOTE: To get a Rinse & Spin cycle, select Drain & Spin and
the Extra Rinse option.
Preferences
Touch to access Times and Dates, Sound Volume, Display
Settings, and Regional. Follow the screen prompts.
WiFi
Touch to access Connect to Network, SAID (Smart Appliance
ID) Codes, Mac Address, and WiFi. Follow the screen
prompts.
Soil Level Option
The recommended soil level is preset for each cycle. The Soil
Level option allows you to select a Light, Normal, or Heavy soil
level setting. Some preset soil levels can be changed. For heavily
soiled and sturdy fabrics, select the Heavy soil level setting.
For lightly soiled and delicate fabrics, select the Light soil level
setting. Lower soil level settings will help reduce tangling and
wrinkling.
15
Touch and hold the START/PAUSE button for 3 seconds
to start the cycle. To pause a cycle in progress, touch the
START/PAUSE button once; then touch again to continue the
cycle. To cancel a cycle, touch the “X” on the touch screen to
the right of the estimated time remaining and run Drain & Spin
to remove any excess water.
At each stage of the process, you may notice sounds or
pauses that are different from traditional washers.
After you touch and hold the START/PAUSE button, you
will notice the ‘Add Garment’ prompt on the machine. See
the ‘Unlocking the door to add garments’ section for more
information on what this means. The drum will make a partial
turn. The door will click when it locks. Once the door has
locked, the washer will begin spinning to sense load size.
This sensing process will continue throughout the cycle. After
the load size is sensed, the estimated time based on load
size will be displayed and water will be added. You may hear
water owing through the dispenser, adding detergent to the
load. The actual cycle time may be lengthened; however, the
display will continue to show the estimated time.
Unlocking the door to add garments:
If you need to open the door to add one or two missed
garments, you may do so when “Add Garments” appears on
the display. The time allowed to add a garment will vary based
on cycle selection and load size.
Touch ADD GARMENTS once; the door will unlock once
the washer movement has stopped. This may take several
seconds. Then close the door and touch and hold Start again
to restart the cycle.
Adding items after “Add Garments” is no longer displayed:
Cancel the current cycle. Water will drain and you will need
to reselect the cycle and restart.
12. Touch and hold START/PAUSE
button for 3 seconds to begin cycle
13. Touch POWER button to turn off
washer after cycle ends
The Power button is also used to turn on the washer
before use.
Info
Touch to access Service & Support, Store Demo Mode,
Restore Factory, WiFi Terms and Conditions, and Software Terms
and Conditions. Follow the screen prompts.
NOTE: All changes to settings will remain in effect until settings are
changed again.
14. Remove garments promptly
after cycle is nished
Promptly remove garments after cycle has completed to avoid
odor and rusting of metal objects on garments. When unloading
garments, pull back the door seal and check for small items
between the tub and the washer drum.
If you will be unable to remove the load promptly after a wash-
only cycle, use the FanFresh
®
option (see Step 10).
NOTES:
n
This washer has a tight seal to avoid water leaks. To avoid
odors, leave the door open to allow the washer to dry
between uses.
Setting a delayed start
Touch POWER until the indicators turn on. From the home
screen, make sure the washer is set to the correct time and
date (if it is not, see Step 11 for instructions on how to set the
time and date).
Touch the clock icon on the far right portion of the touch
screen. The “Select a start time” screen will show on the
display. Scroll horizontally to select a preferred start time
for your wash cycle. The times will display in 15-minute
increments up to 8 hours. Touch OKAY to set the start time.
The display will return to the home screen and the clock icon
will turn brown.
To delete or modify the delayed start, touch the clock icon
again and follow the screen prompts.
Temperature
WARM
Soil Level
LOW
Spin Speed
EXTRA FAST
What to Wash
REGULAR
How to Wash
NORMAL
3:15
4:28
16
Washer Maintenance
WASHER CARE
WASHER CARE (cont.)
Recommendations to Help Keep Your Washer Clean and
Performing at Its Best
1. Always use High Efciency (HE) detergents and follow the
HE detergent manufacturer’s instructions regarding the
amount of HE detergent to use. Never use more than the
recommended amount because that may increase the
rate at which detergent and soil residue accumulate inside
your washer which, in turn, may result in undesirable odor.
2. Use warm or hot water washes sometimes (not
exclusively cold water washes) because they do a better
job of controlling the rate at which soils and detergent
accumulate.
3. Always leave the washer door slightly ajar between
uses to help dry out the washer and avoid the buildup
of odor-causing residue.
4. Periodically clean residue from all interior surfaces of the
window. For better care, wipe the entire inside of the door
with a damp cloth.
Cleaning Your Front Loading Washer
Read these instructions completely before beginning the
routine cleaning processes recommended below. This washer
maintenance procedure should be performed, at a minimum,
once per month or every 30 wash cycles, whichever occurs
sooner, to control the rate at which soils and detergent may
otherwise accumulate in your washer.
Cleaning the Door Seal
1. Open the washer door and remove any clothing or items
from the washer.
2. Inspect the gray-colored seal between the door opening
and the drum for stained areas, soil buildup, or lint. Pull
back the seal to inspect all areas under the seal and to
check for foreign objects or lint.
3. If stained areas, soil buildup, or lint are found, wipe down
these areas of the seal using either of the following two
procedures:
a. affresh
®
Machine Cleaning Wipes Procedure:
i. When the cycle is complete, gently pull back the
rubber door seal and clean the entire surface with the
textured side of an affresh
®
Machine Cleaning Wipe.
b. Dilute Liquid Chlorine Bleach Procedure:
i. Mix a dilute bleach solution, using 3/4 cup (177 mL)
of liquid chlorine bleach and 1 gallon (3.8 L) of warm
tap water.
ii. Wipe the seal area with the dilute solution, using
a damp cloth.
iii. Let stand 5 minutes.
iv. Wipe down area thoroughly with a dry cloth and let
washer interior air dry with door open.
IMPORTANT:
Wear rubber gloves when cleaning with bleach.
Refer to the bleach manufacturer’s instructions for
proper use.
Cleaning the Inside of the Washer
This washer has a special cycle that uses higher water
volumes in combination with affresh
®
Washer Cleaner or
regular liquid chlorine bleach to thoroughly clean the inside
of the washer. Steam washer models also utilize steam to
enhance cleaning in this special cycle.
IMPORTANT: Do not use thickened, easy-pour, or no-splash
bleach when running the Clean Washer with affresh
®
cycle as
excess suds may occur.
NOTE: Read these instructions completely before beginning
the cleaning process.
Begin procedure
1. Clean Washer with affresh
®
Cycle Procedure
(Recommended for best performance):
a. Open the washer door and remove any clothing
or items.
b. Use an affresh
®
Machine Cleaning Wipe or a soft,
damp cloth or sponge to clean the inside door window.
c. Add an affresh
®
Washer Cleaner tablet to the
washer drum.
d. Do not add the affresh
®
Washer Cleaner tablet to
the dispenser drawer.
e. Do not add any detergent or other chemical to the
washer when following this procedure.
f. Close the washer door.
g. Select the Clean Washer with affresh
®
cycle.
h. Select the FanFresh
®
option to help dry the washer
interior after the cycle is complete.
NOTE: The washer remembers your last option selection
and will use it for future wash cycles until you deselect
that option.
i. Touch and hold START/PAUSE button to begin the
cycle. The Clean Washer with affresh
®
Cycle operation
is described below.
2. Chlorine Bleach Procedure:
a. Open the washer door and remove any clothing
or items.
b. Open the single-load dispenser drawer and add
regular liquid chlorine bleach to the MAX level in
both the bleach compartment and the fabric softener
compartment. Either traditional or HE chlorine bleach
can be used.
IMPORTANT: Do not use thickened, easy-pour,
or no-splash bleach as excess suds may occur.
NOTE: Use of more liquid chlorine bleach than is
recommended above could cause washer damage
over time.
c. Close the washer door and the dispenser drawer.
d. Do not add any detergent or other chemicals to the
washer when following this procedure.
CLEANING THE WASHER LOCATION
Keep washer area clear and free from items that would block
the airow for proper drying. This includes clearing piles of
laundry in front of the washer.
17
The Clean Washer with affresh
®
message will ash at the
end of a wash cycle when the washer has run 30 wash
cycles. This is a reminder to run the Clean Washer with
affresh
®
cycle.
If the Clean Washer with affresh
®
cycle is not run, the
message will stop ashing at the end of a wash cycle
after running three more regular wash cycles. After 30 more
wash cycles are completed, the Clean Washer with affresh
®
message will again ash at the end of a wash cycle as a
reminder.
CLEAN WASHER CYCLE REMINDER
WASHER CARE (cont.)
e. Select the Clean Washer with affresh
®
cycle.
f. Select the FanFresh
®
option to help dry the washer
interior after the cycle is complete.
NOTE: The washer remembers your last option
selection and will use it for future wash cycles until
you deselect that option.
g. Touch and hold START/PAUSE to begin the cycle.
The Clean Washer with affresh
®
cycle operation
is described below.
NOTE: For best results, do not interrupt cycle.
Description of Clean Washer with affresh
®
Cycle
Operation:
1. The Clean Washer with affresh
®
cycle will determine
whether clothing or other items are in the washer.
2. If no items are detected in the washer, it will proceed with
the cycle.
a. If any items are detected in the washer, “rL”
(remove load) will be displayed. The door will unlock.
Open washer and remove any garments from the
washer drum.
b. Touch POWER to clear the “rL” code.
c. Touch and hold START/PAUSE to restart the cycle.
3. Steam models only: During the rst 20 minutes of the
cycle, it will activate the steamer but the drum will not
spin or ll with water. You may see condensation on the
door window during this initial phase. If you are using
an affresh
®
Washer Cleaner tablet, it will not dissolve
completely during the steam phase. This is normal.
After the cycle is complete, leave the door open slightly to
allow for better ventilation and drying of the washer interior.
WASHER CARE (cont.)
Cleaning the Dispensers
After using the Clean Washer with affresh
®
cycle, you may
nd some residue buildup in the washer’s dispensers.
To remove residue from the single-load dispenser, remove
the drawer and wipe the surfaces with an affresh
®
Machine
Cleaning Wipe or a damp cloth and towel dry either before
or after you run the Clean Washer with affresh
®
cycle. Use
an all-purpose surface cleaner, if needed.
To remove residue from the Load & Go
dispenser, lift the
handle on the dispenser housing and pull to remove it from
the washer cabinet; then rinse the dispenser thoroughly with
running water. Wipe the outside dispenser surface with an
affresh
®
Machine Cleaning Wipe or a damp cloth, and towel
dry. Use an all-purpose surface cleaner, if needed.
Replace the dispenser in the washer cabinet and make sure
that it is correctly seated.
IMPORTANT: Dispensers are not dishwasher safe.
Cleaning the Outside of the Washer
Use an affresh
®
Machine Cleaning Wipe or a soft, damp
cloth or sponge to wipe up any spills. Occasionally wipe the
outside of your washer to help keep it looking new. Use an
affresh
®
Machine Cleaning Wipe or mild soap and water.
IMPORTANT: To avoid damaging the washer’s nish, do not
use abrasive products.
18
REMOVING THE DISPENSER (cont.)
Removing the Dispenser
To remove:
1. Pull dispenser drawer out until it stops.
2. Press down on the release tab and pull straight out
to remove the dispenser.
3. Lift off cover panel
by pulling straight up.
To replace:
1. Position cover panel back
onto posts on dispenser.
Apply slight pressure on
cover panel to seat it.
2. Align edges of dispenser
with guides in washer;
then slide dispenser
back into slot.
Single-Load Dispenser Drawer
It is recommended that you rinse out the Load & Go
containers when relling, when changing detergent types or
concentrations, or when the washer will not be used for an
extended period.
1. Pull the dispenser drawer out until it stops.
2. Lift out the Load & Go
containers.
3. Lift the ll lid and ush interior thoroughly with warm water.
4. Allow to air dry.
IMPORTANT: Containers are not dishwasher safe.
CLEANING LOAD & GO
CONTAINERS
Replace inlet hoses after ve years of use to reduce the risk
of hose failure. Periodically inspect and replace inlet hoses
if bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses:
Mark the date of replacement on the label with a permanent
marker.
Check that the old washers are not stuck on the washer inlet
valves.
Use new washers in the new inlet hoses to ensure a proper seal.
WATER INLET HOSES
19
REINSTALLING/USING
WASHER AGAIN
To reinstall washer after non-use, vacation, winter storage,
or moving:
1.
Refer to the Installation Instructions to locate, level,
and connect washer.
2.
Before using again, run washer through the following
recommended procedure:
To use washer again:
1.
Flush water pipes and hoses. Reconnect water inlet
hoses. Turn on water faucets.
2.
Plug in washer or reconnect power.
3.
Run washer through Heavy Duty cycle to clean washer
and remove antifreeze, if used. Use only HE detergent.
Use half the manufacturer’s recommended amount for
a medium-size load.
TRANSPORTING YOUR WASHER
1. Shut off water faucet. Disconnect and drain water inlet
hose.
2. If washer will be moved during freezing weather, follow
“Winter Storage Care” directions before moving.
3. Disconnect drain hose from drain system and from back
of washer.
4. Unplug power cord.
5. Place inlet hoses and drain hose inside drum.
6. Bundle power cord with a rubber band or cable tie
to keep it from hanging to the ground.
IMPORTANT: Call for service to install new transport bolts.
Do not reuse transport bolts. Washer must be transported
in the upright position. To avoid structural damage to your
washer, it must be properly set up for relocation by a
certied technician.
If moving, or not using your washer for a period of time,
follow these steps:
1. Unplug or disconnect power to washer.
2. Turn off water supply to washer to avoid ooding due
to water pressure surges.
HELPFUL TIP: Attach a reminder note to the washer
to turn the water back on before washer’s next use.
3. Clean the dispensers. See “Cleaning the Dispensers.”
NON-USE AND VACATION CARE
WINTER STORAGE CARE
IMPORTANT: To avoid damage, install and store washer
where it will not freeze. Because some water may stay in
hoses, freezing can damage washer. If storing or moving
during freezing weather, winterize your washer.
To winterize washer:
1. Shut off water faucet. Disconnect and drain water
inlet hose.
HELPFUL TIP: Attach a reminder note to the washer
to turn the water back on before washer’s next use.
2. Remove drain pump lter.
3. Put 1 qt. (1 L) of R.V.-type antifreeze in drum and run
washer on Normal cycle for about 2 minutes to mix
antifreeze and remaining water.
4. Unplug washer or disconnect power.
20
4. Remove large clumps of lint by hand from the lter and
place lint in a suitable waste container. Remove remaining
residue from the lter by rinsing with water.
5. Reinsert the drain pump lter by turning it clockwise.
Make sure to turn it in as far as it will go, with the lter
handle remaining as close as possible to the vertical
position.
6. Replace and close the dispenser drawer. Make sure to
insert both rails simultaneously when replacing the drawer.
You will hear a clicking sound that indicates the rails have
engaged. To ensure proper placement of the drawer, pull
out fully. The drawer should be fully engaged and the rails
locked in place. Make sure the drain hose is secured in the
hose clip and tucked underneath the cutout.
CLEANING THE DRAIN PUMP FILTER/
DRAINING RESIDUAL WATER (cont.)
CLEANING THE DRAIN PUMP FILTER/
DRAINING RESIDUAL WATER
NOTE: Perform the following procedure occasionally.
IMPORTANT: Make sure the washer is off before cleaning the
drain pump lter.
Gently pull back the rubber door seal and clean any stained
areas, soil buildup, or lint with the textured side of an
affresh
®
Machine Cleaning Wipe.
ADDITIONAL CLEANING
Black hose
Drain pump
lter
With your nger, push
down on tab on right side
of drawer, and up on tab on
left side of drawer.
Right sideLeft side
Hose clip
1. Open the dispenser drawer by pulling on the handle at the
base of the washer. This will reveal the drain pump lter.
Remove the drawer by releasing the tab on each side.
2. Place a broad, at container beneath the drain pump lter
to collect the drain water. Release the black hose from the
hose clip, remove the plug, and drain the hose into the
container. Empty the container. Repeat this procedure if
necessary until all the water has drained. Make sure that
the black hose is completely dry, replace the plug, and
secure the hose in the clip.
NOTE: If water does not drain well, push in hose slightly to
remove any possible kinks.
3. Lay a cotton cloth beneath the drain pump lter to absorb
any water still in it. Then remove the drain pump lter by
turning it counterclockwise.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

Whirlpool WFW9620HC Mode d'emploi

Catégorie
Machines à laver
Taper
Mode d'emploi
Ce manuel convient également à

dans d''autres langues