AT&T EL50019 Manuel utilisateur

User’s manual

EL50019

DECT 6.0 expansion handset

for use with AT&T models

EL52119/EL52219/EL52319

Congratulations

on your purchase of this AT&T product. Before using this AT&T

product, please read the Important safety information section on

pages 22-24 of this manual. For complete instructions, please

refer to the manual provided with your EL52119/EL52219/EL52319

telephone.

You can also visit our website at www.telephones.att.com or

call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

This telephone meets the California Energy Commission regulations

for energy consumption. Your telephone is set up to comply with the

energy-conserving standards right out of the box. No further action

is necessary.

Model number: EL50019

Type: DECT 6.0 expansion handset

Serial number:

Purchase date:

Place of purchase:

Both the model and serial numbers of your AT&T product can be

found on the bottom of the telephone base.

Save your sales receipt and original packaging in case it is

necessary to return your telephone for warranty service.

the AT&T logo are trademarks of AT&T Intellectual Property licensed to

Advanced American Telephones, San Antonio, TX 78219. Printed in China.

Telephones identified with this logo have reduced noise and

interference when used with most T-coil equipped hearing aids and

cochlear implants. The TIA-1083 Compliant Logo is a trademark of the

Telecommunications Industry Association. Used under license.

The ENERGY STAR® program (www.energystar.gov) recognizes and

encourages the use of products that save energy and help protect

our environment. We are proud to mark this product with the ENERGY

STAR® label indicating it meets the latest energy eciency guidelines.

Parts checklist

Your telephone package contains the following items. Save your

sales receipt and original packaging in the event warranty service

is necessary.

Battery for

cordless handset

Cordless handset

Charger for cordless

handset with power

adapter installed

Battery

compartment cover

User’s manual

EL50019

DECT 6.0 expansion handset

for use with AT&T models

EL52119/EL52219/EL52319

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT162342/BT262342 (2.4V 300mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine GP1621

User’s manual

EL50019

DECT 6.0 expansion handset

for use with AT&T models

EL52119/EL52219/EL52319

Table of contents

Getting started

Installation ............................................................................................................................. 1

Quick reference guide ....................................................................................................2

Charger installation .........................................................................................................5

Battery installation and charging ..........................................................................6

Registration and deregistration

Adding and registering handsets ........................................................................... 9

Register a handset to your telephone base ...............................................9

Deregistering handsets .............................................................................................. 11

Deregister all handsets from your telephone base.............................11

Appendix

Troubleshooting...............................................................................................................12

Maintenance ......................................................................................................................20

Important safety information ................................................................................21

Safety information ..................................................................................................... 21

Especially about cordless telephones .......................................................... 22

Precautions for users of implanted cardiac pacemakers ..............23

Pacemaker patients ................................................................................................. 23

ECO mode .......................................................................................................................23

Especially about telephone answering systems...................................23

For C-UL compliance ....................................................................................................24

Mesures de sécurité importantes ..................................................................24

FCC Part 68 and ACTA ................................................................................................. 27

FCC Part 15 ..........................................................................................................................29

California Energy Commission battery charging testing

instructions .................................................................................................................... 30

Limited warranty .............................................................................................................31

Technical specications .............................................................................................34

DECT 6.0 digital technology ................................................................................34

Telephone operating range ................................................................................34

Simulated full-duplex handset speakerphone ......................................34

1

See pages 7-9

for easy instructions.

You must install and

charge the battery before

using the telephone.

STOP!

Installation

Your product may be shipped with a protective sticker covering the

handset display - remove it before use.

For customer service or product information, visit our website at

www.telephones.att.com or call 1 (800) 222-3111.

In Canada, dial 1 (866) 288-4268.

Avoid placing the charger too close to:

X Communication devices such as television sets, VCRs, or other

cordless telephones.

X Excessive heat sources.

X Noise sources such as a window with trac outside, motors,

microwave ovens, refrigerators, or uorescent lighting.

X Excessive dust sources such as a workshop or garage.

X Excessive moisture.

X Extremely low temperature.

X Mechanical vibration or shock such as on top of a washing

machine or workbench.

Getting started

Quick reference guide

Getting started

2

REDIAL/PAUSE

X Press repeatedly to view the last

10 numbers dialed.

X While entering numbers,

press and hold to insert a dialing

pause.

MENU/SELECT

X Press to display the menu.

X Once in the menu, press to

select an item or save an entry

or setting.

PHONE/FLASH

X Press to make or answer a call.

X During a call, press to answer an

incoming call when you receive

a call waiting alert.

OFF/CANCEL

X During a call, press to hang up.

X While in a menu, press to cancel

an operation, back up to the

previous menu, or exit the

menu display; or press and hold

this button to exit to idle mode.

X Press and hold while the

handset is not in use to erase

the missed call indicator.

1

X While reviewing a caller ID

log entry, press repeatedly to

add or remove 1 in front of

the telephone number before

dialing or saving it in the

directory.

X Press and hold to set or dial

your voicemail number.

Quick reference guide

Getting started

3

TONE

X Press to switch to tone dialing

temporarily during a call if you

have pulse service.

QUIET

X Press and hold to set and turn

on the QUIET mode, or turn it

o.

X When reviewing a caller ID log

entry, press repeatedly to view

other dialing options.

/SPEAKER

X Press to turn on the handset

speakerphone, press again to

resume normal handset use.

MUTE

X When the telephone is ringing,

press to mute the ringer

temporarily.

X During a call, press to mute the

microphone .

DELETE

X While predialing, press to delete

digits.

X While reviewing the redial list,

directory, speed dial list or

caller ID log, press to delete an

individual entry.

X When entering names or

numbers, press to delete a digit

or character.

X When entering names or

numbers, press and hold to

erase all digits or characters.

INT

X Press to initiate an intercom

conversation or transfer a call.

CHARGE light

X On when the handset is

charging in the telephone base

or charger.

pDIR/VOLUME

X Press to scroll up while in

menus.

X Press to increase the listening

volume when on a call, or

increase the message playback

volume.

X Press to show directory entries

when the handset is not in use.

X While entering names or

numbers in the directory, press

to move the cursor to the right.

qCID/VOLUME

X Press to scroll down while in

menus.

X Press to decrease the listening

volume when on a call, or

to decrease the message

playback volume.

X Press to show the caller ID log

when the handset is not in use.

X While entering names or

numbers in the directory, press

to move the cursor to the le.

Quick reference guide

Getting started

4

Quick reference guide

Getting started

5

For complete instructions, refer to the manual provided with your

EL52119/EL52219/EL52319 telephone system. If you are unable to

nd your manual, go to www.telephones.att.com/manuals

to read and/or download the manual.

Main menu

Play messages

Answering sys

Directory

Caller ID log

Call block

Ringers

Set date/time

Settings

Using menus:

X Press to show

the menu.

X Press or to scroll

through menu items.

X Press to conrm or

save changes to a highlighted

menu item.

X Press to cancel an

operation, back up to the previous

menu, or exit the menu display.

Play messages

ECO

IMPORTANT INFORMATION

X Use only the power adapter supplied with this product. To order a replacement

power adapter, visit our website at www.telephones.att.com or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

X The power adapter is intended to be correctly oriented in a vertical or oor

mount position. The prongs are not designed to hold the plug in place if it is

plugged into a ceiling, under-the-table or cabinet outlet.

6

Charger installation

Install the charger, as shown below.

Getting started

Plug the large end of the

charger’s power adapter

into an electrical outlet not

controlled by a wall switch.

Ensure the small end of the

charger’s power adapter is

plugged into the power jack on

the bottom of the charger.

7

Battery installation and charging

Install the battery as shown on the next page. Once you have

installed the battery, the screen indicates the battery status

(see the following table). If necessary, place the handset in

the telephone base or charger to charge the battery. For best

performance, keep the handset in the telephone base or charger

when not in use. The battery is fully charged aer 16 hours of

continuous charging. See the table on page 35 for battery

operating times.

If the screen shows Put in charger and ashes, you need to

charge the handset without interruption for at least 30 minutes to

give the handset enough charge to use the telephone for a short

time. The following table summarizes the battery charge indicators

and actions to take.

Getting started

Battery indicators Battery status Action

The screen is blank, or

shows Put in charger

and (ashing).

Battery has no or

very little charge. The

handset cannot be

used.

Charge without interruption

(at least 30 minutes).

The screen shows

Low battery and

(ashing).

Battery has enough

charge to be used for a

short time.

Charge without interruption

(at least 30 minutes).

The screen shows

HANDSET X.

Battery is charged. To keep the battery

charged, place it in the

telephone base or charger

when not in use.

NOTE: If you are on a phone call in low battery mode, you hear four short beeps

every 50 seconds.

Battery installation and charging

Getting started

8

1. Plug the battery connector

securely into the socket

inside the handset battery

compartment. Insert the

supplied battery with the

label THIS SIDE UP facing

up, as indicated.

2. Align the cover at against the battery compartment, then slide it

upwards until it clicks into place.

3. Charge the handset by placing it face up in the telephone base

or charger. The CHARGE light is on when charging.

THIS

SIDE UP / CE

CÔTÉ VERS LE HAUT

Batt

ery

Pac

k /

Bl

o

c-pile

s :

BT

162342/BT26

234

2 (2.4V 300m

Ah Ni-

MH

)

WARNIN

G

/

AVERTIS

SEMENT

:

DO NOT BURN OR PUNC

T

U

RE BA

T

TE

RIE

S

.

NE

PAS

I

NC

INÉR

ER

OU

P

ERC

ER LE

S P

ILES.

Made in

C

h

ina

/

F

abriqué en

ch

ine

CR

1535

THIS SIDE UP

T

HIS SID

E

U

P / CE CÔ

T

É

VE

R

S L

E HAU

T

Batter

y

Pack / Bloc-p

i

l

es :

BT18

3342/

BT

283

34

2

(2.

4

V

400mAh

Ni-MH

)

WARNI

N

G /

AV

ERTIS

SEMENT :

DO

NOT BURN O

R

P

U

NCTURE BATTER

I

ES.

NE

PAS I

NC

I

NÉRER O

U

P

ER

C

E

R

L

ES

PILE

S

.

Made in China /

Fa

b

riqué

e

n

chine

C

R

1535

IMPORTANT INFORMATION

X Use only the supplied rechargeable battery or replacement battery (model

BT162342/BT262342). To order, visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial

1 (866) 288-4268.

X If you do not use the handset for a long time, disconnect and remove the

battery to prevent possible leakage.

Aer you install your telephone or power returns following a power

outage, the handset will prompt you to set the date and time. Aer

that, it will prompt if you want to set up the answering system

via voice guide. Press to start. For details, see the

corresponding sections in the telephone system’s user’s manual. To

skip these settings, press .

Battery installation and charging

Getting started

9

To replace the battery, press the tab and

slide the battery compartment cover

downwards. Li out the old battery and

disconnect it from the handset. Follow

the instructions to install and charge a

new battery.

T

HIS SID

E

U

P / CE CÔ

T

É

VER

S L

E HAU

T

Batter

y

Pack / Bloc-p

i

l

es :

BT18

3342/

BT

283

34

2

(2.

4

V

400mAh Ni-MH

)

WARNI

N

G /

AV

ERTIS

SEMENT :

DO

NOT BURN O

R

P

U

NCTU

RE BATTER

I

ES.

NE

PAS I

NC

I

NÉRER O

U

P

ER

C

E

R

L

ES

PILE

S

.

Made in C

hina /

Fa

b

riqué

e

n

chine

CR

1535

Adding and registering handsets

Before using a new EL50019 handset, you must register it with the

AT&T EL52119/EL52219/EL52319 telephone system (purchased

separately). The telephone system can support up to ve handsets.

The handset(s) provided with your telephone system are already

registered as HANDSET 1, and so forth. Additional handsets are

assigned numbers in the sequential order they are registered (up

to HANDSET 5). Each handset must be registered to the telephone

base before use.

Register a handset to your telephone base

1. Before you begin registration, make sure the handset is out of the

telephone base or charger and shows To register HS... and

...see manual, alternately.

2. Put the handset you wish to register on the telephone base

cradle.

Registration and deregistration

10

For registration, put the handset on the

telephone base, not the handset charger.

Adding and registering handsets

3. The IN USE light on the telephone base turns on. Aer about

10 seconds, the handset shows Registering.... The handset

shows Registered and you hear a conrmation tone if the

registration was successful. The IN USE light turns o. The

handset is now registered with the telephone base.

If the registration fails, the handset displays Reg. failed and then

To register HS... and ...see manual, alternately. Try the registration

again by removing the handset from the telephone base and then

placing it back in.

NOTES:

X You cannot register a handset if any other system handset is in use.

X You can only register one handset to the telephone base at a time.

Registration and deregistration

11

Deregistering handsets

If you want to replace a handset, or reassign the designated

handset number of a registered handset, you must deregister

all handsets that are registered to the telephone base, and then

register each handset individually.

Please read carefully through all the instructions on this page

before beginning the deregistration process.

Deregister all handsets from your telephone base

In addition to the cordless handsets, this operation will also

deregister all cordless headsets and speakerphones registered to

your telephone base.

1. Press and hold FIND HS on the telephone base for about 10

seconds until the IN USE light on the telephone base turns on

and starts to ash. Then, release the button.

2. Immediately press FIND HS again while the IN USE light is still

ashing. The IN USE light ashes for approximately ve seconds.

3. The deregistration takes about 10 seconds to complete. All

handsets display To register HS... and ...see manual, alternately,

if the deregistration was successful.

To register the handset(s) to the telephone base again, follow the

registration instructions on pages 10-11.

NOTES:

X If the deregistration fails, you may need to reset the system and try again. To reset, unplug the power

from the telephone base and plug it back in.

X You cannot deregister the handset(s) if any other system handset is in use.

X Even if the battery is depleted, you can still deregister the handset by following the steps, as men-

tioned above. After the handset is charged for at least ten minutes, the screen shows To register HS...

and ...see manual, alternately.

Registration and deregistration

12

Troubleshooting

If you have diculty with your phone, please try the following

suggestions. For Customer Service, visit our website at

www.telephones.att.com or call 1 (800) 222-3111.

In Canada, dial 1 (866) 288-4268.

The handset registration is unsuccessful.

X Follow the handset registration instructions to register the

handset again (see Adding and registering handsets on pages

10-11).

My telephone doesn’t work at all.

X Make sure the power cord is securely plugged in.

X Make sure you plug the battery connector securely into the

cordless handset.

X Make sure you plug the telephone line cord securely and rmly

into the telephone base and the telephone wall jack.

X Charge the battery in the cordless handset for at least 10 hours.

For optimum daily performance, return the cordless handset to

the telephone base or charger when not in use.

X If the battery is depleted, it might take approximately 30

minutes to charge the handset before it shows Low battery.

See page 7 for details.

X Reset the telephone base. Unplug the electrical power. Wait for

approximately 15 seconds, then plug it back in. Allow up to one

minute for the cordless handset and telephone base to reset.

X You may need to purchase a new battery. Refer to Battery

installation and charging in this user’s manual on pages

7-9.

The display shows No line. I cannot get a dial tone.

X Try all the suggestions mentioned above.

X If the previous suggestions do not work, disconnect the

telephone line cord from your telephone and connect the

telephone line cord to another telephone.

X If there is no dial tone on that other telephone either, your

telephone line cord may be defective. Install a new telephone

line cord.

Appendix

13

Troubleshooting

Appendix

14

X If changing the telephone line cord does not help, the wall

jack (or the wiring to this wall jack) may be defective. Try

using a dierent wall jack in your home to connect your

EL52119/EL52219/EL52319 telephone, or contact your

telephone service provider (charges may apply).

I cannot dial out.

X Try all the suggestions mentioned above.

X Make sure you have a dial tone before dialing. The cordless

handset might take a second or two to nd the telephone base

and produce a dial tone. This is normal. Wait an extra second

before dialing.

X Eliminate any background noise. Noise from a television, radio or

other appliances might cause the phone to not dial out properly.

If you cannot eliminate the background noise, try muting the

cordless handset before dialing, or dialing from another room

with less background noise.

X If other phones in your home are having the same problem,

contact your telephone service provider (charges might apply).

My cordless handset isn’t performing normally.

X Make sure you plug the power cord securely into the telephone

base. Plug the power adapter into a dierent, working electrical

outlet without a wall switch.

X Move the cordless handset closer to the telephone base. You

might have moved out of range.

X Reset the telephone base. Unplug the electrical power. Wait for

15 seconds, then plug it back in. Allow up to one minute for the

cordless handset and telephone base to reset.

X Other electronic products such as HAM radios and other DECT

phones, can cause interference with your cordless phone. Try

installing your phone as far away as possible from these types of

electronic devices.

X Other electronic products such as HAM radios and other DECT

phones, can cause interference with your cordless phone. Try

installing your phone as far away as possible from these types of

electronic devices.

Troubleshooting

Appendix

Out of range or no pwr at base appears on my cordless handset.

X Ensure you plug the telephone base in properly and the power is

on.

X Place the cordless handset in the telephone base for one minute

to allow the cordless handset and base to synchronize.

X Move the cordless handset closer to the telephone base. You

might have moved out of range.

X Reset the telephone base. Unplug the electrical power. Wait for

15 seconds, then plug it back in. Allow up to one minute for the

cordless handset and telephone base to reset.

X Other electronic products such as HAM radios and other DECT

phones, can cause interference with your cordless phone. Try

installing your phone as far away as possible from these types of

electronic devices.

The batteries do not hold a charge.

X If the cordless handset is in the telephone base or charger and

the charge light is not on, refer to The charge light is o (page

20) in this Troubleshooting guide.

X Charge the battery in the cordless handset for at least 10 hours.

For optimum daily performance, return the cordless handset to

the telephone base or charger when not in use.

X If the battery is depleted, it might take approximately 30

minutes to charge the handset before it shows Low battery.

Refer to the table on page 7 for details.

X You might need to purchase a new battery. Refer to Battery

installation and charging in this user’s manual on pages

7-9.

I hear other calls while using my phone.

X Disconnect the telephone base from the telephone jack, and

plug in a dierent telephone. If you still hear other calls, call your

telephone service provider.

15

I get noise, static, or weak signals even when I’m near the

telephone base.

X If you subscribe to high-speed Internet service (DSL - digital

subscriber line) through your telephone line, you must install a

DSL lter between the telephone line cord and the telephone

wall jack. The lter prevents noise and caller ID problems as

a result of DSL interference. Please contact your DSL service

provider for more information about DSL lters.

X You may be able to improve the performance of your cordless

phone by installing your new telephone base as far as possible

from any other existing cordless telephone system that may

already be installed.

X Other electronic products such as HAM radios and other DECT

phones, can cause interference with your cordless phone. Try

installing your phone as far away as possible from these types of

electronic devices.

X Do not install this phone near a microwave oven or on the same

electrical outlet. You might experience decreased performance

while the microwave oven is operating.

X If you plug your phone in with a modem or a surge protector,

plug the phone (or modem/surge protector) into a dierent

location. If this does not solve the problem, relocate your phone

or modem farther apart from one another, or use a dierent

surge protector.

X Move your phone to a higher location. The phone might have

better reception in a high area.

X If the other phones in your home are having the same problem,

contact your telephone service provider (charges may apply).

I experience poor sound quality when using the speakerphone.

X For increased sound quality while using the speakerphone, place

the handset on a at surface with the dialing keys facing up.

Troubleshooting

Appendix

16

La page est en cours de chargement...

AT&T EL50019 Manuel utilisateur

AT&T EL50019 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents