Arlo ABC1000-200NAS Manuel utilisateur

Arlo
Marque
Arlo
Modèle
ABC1000-200NAS
Catégorie
Moniteurs vidéo bébé
Taper
Manuel utilisateur
Arlo Baby
Quick Start Guide
3
Welcome
Thank you for choosing Arlo Baby.
Keep reading for important info to help you
get your new Arlo Baby set up and running.
If you need help, contact Arlo before
returning your product to the store. Most
questions can be answered through our
online support center at arlo.com/support.
What’s in the box
Arlo Baby
camera
USB power
cable
Wall-mount
plate
USB power
adapter
(varies by region)
Mounting screws
and anchors
5
4
Get the app
Download the free Arlo app to get started.
The app guides you through installation.
Use the wall mount
You can place Arlo Baby on a flat surface or mount it on a wall.
1. Place the wall plate.
2. Secure the wall plate with the included screws.
3. Align the holes on the base of your camera with the wall
plate.
4. Rotate the camera until the base snaps into place.
7
6
Tilt and swivel
Position your camera so that it captures the area that you want
to monitor.
Start streaming
Your Arlo Baby camera is set up and ready to go.
To view useful tutorial videos, find troubleshooting tips, or get
support, visit support.arlo.com.
9
8
Remove an Arlo Baby character set
Your Arlo Baby camera might come with a character set. You
can remove the character set or replace it with other Arlo Baby
characters.
1. Pull the character ears up to remove them.
2. Rotate the character feet and pull them o.
Add an Arlo Baby character set
1. Align the ears with the camera lens and press them onto the
camera.
2. Align the foot plate with the holes on the bottom of the
camera and rotate the foot plate until it clicks into place.
11
10
Add Arlo Baby to the Apple Home app
1. Locate the HomeKit code.
The code is on the back cover of this guide and on the Arlo
Baby camera label located on the bottom of the camera.
You can type the HomeKit
code that is on the Arlo
Baby camera label
You can scan the
HomeKit code on the
back of this guide
xxx-xxx-xxx
If you are using an Arlo Baby character, rotate the character
feet and pull them o to see the HomeKit code on the label.
2. Launch the Apple Home app.
3. Tap the plus sign at the top of the page on the Home tab
and then tap Add Accessory.
Your Apple mobile device’s camera launches and you are
prompted to scan or enter the HomeKit code.
13
12
4. Scan the HomeKit code using your mobile device’s camera.
If you have trouble scanning the code, tap Don’t Have a
Code or Can’t Scan? and then type the code.
5. After your camera is added, do the following to complete the
setup process:
• Rename your camera.
• Assign the camera to a room within HomeKit, or create a
new room to place it in.
• Add the camera to your Favorites.
6. Tap Done on the top right.
For live video, tap the Arlo Baby screen shot. To start using two-
way audio, tap the microphone icon on the bottom right.
Arlo Baby features
¾ Rechargeable battery
Your Arlo Baby camera includes a built-in rechargeable
battery and can work for several hours at a time without
being plugged in. You can place the camera in locations
where you cannot connect it to a power outlet.
Use the switch on the bottom
of the camera to power the Arlo
Baby camera’s battery o. The
camera’s battery is on when the
green color is visible.
If the camera is unplugged and you don’t want the battery
to lose its charge, set the switch to O.
O
On
Use of the Works with Apple HomeKit logo means that an electronic accessory was designed
to connect specifically to iPod touch, iPhone, or iPad, respectively, and is certified by the
developer to meet Apple performance standards. Apple is not responsible for the operation of
this device or its compliance with safety and regulatory standards.
14
¾ Night light
Use the app or the top
button on the right side of
the camera to turn the night
light on and o.
¾ Music
Use the app or the bottom
button on the right side
of the camera to play and
pause music.
¾ Local streaming
Enjoy minimal video lag by
connecting your mobile device to
the same WiFi network (SSID) as
the one Arlo Baby is connected to.
Apple HomeKit setup code
©2018 Arlo Technologies, Inc. Arlo, Arlo logo, and Every Angle Covered are
trademarks of Arlo Technologies, Inc. App Store is a service mark of Apple Inc.,
registered in the U.S. and other countries. Google Play and the Google Play logo
are trademarks of Google Inc. Amazon, Alexa and all related logos are trademarks
of Amazon.com, Inc. or its aliates. Other trademarks are for reference purposes
only.
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en
français canadien à arlo.com/docs.
(If this product is sold in Canada, you can access this document in Canadian
French at arlo.com/docs.)
For the current EU Declaration of Conformity, visit
http://kb.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
Arlo Technologies, Inc.
2200 Faraday Ave. Suite 150
Carlsbad, CA 92008 USA
www.arlo.com
www.arlo.com/support
Arlo International, Ltd.
Floor 3, Building 3 University Technology Center
Curraheen Road, Cork, Ireland
May 2018
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Arlo ABC1000-200NAS Manuel utilisateur

Arlo
Marque
Arlo
Modèle
ABC1000-200NAS
Catégorie
Moniteurs vidéo bébé
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents