LG 65UV340C Le manuel du propriétaire

www.lg.com

Please read this manual carefully before operating

your TV and retain it for future reference.

Safety and Reference

LED TV*

* LG LED TVs are LCD TVs with LED backlighting.

OWNER’S MANUAL

43UV340C

43UV340H

49UV340C

49UV340H

55UV340C

55UV340H

65UV340C

65UV340H

75UV340C

P/NO : MFL69885533 (1705-REV00)

*MFL69885533*

2

ENGLISH

Warning! Important Safety

instructions

Read these instructions. Keep these instructions.

Heed all warnings. Follow all instructions.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER

TO QUALIFIED SERVICE PERSONNEL.

The symbol is intended to alert the user

to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that

may be of sufficient magnitude to constitute a

risk of electric shock to persons.

The symbol is intended to alert the user

to the presence of important operating

and maintenance (servicing) instructions in

the literature accompanying the device.

WARNING : TO REDUCE THE RISK OF FIRE

AND ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

• Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

• Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade or

the third prong are provided for your safety. If

the provided plug does not fit into your outlet,

consult an electrician for replacement of the

obsolete outlet.

• Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

• Only use attachments/accessories specified by

the manufacturer.

• Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

• Unplug this apparatus during lightning storms

or when unused for long periods of time.

• Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

• Do not press strongly upon the panel with a

hand or a sharp object such as a nail, pencil, or

pen, or make a scratch on it.

• Do not stick metal objects or any other

conductive material into the power cord. Do

not touch the end of the power cord while it is

plugged in.

• Keep the packing anti-moisture material or

vinyl packing out of the reach of children.

Anti-moisture material is harmful if swallowed.

If swallowed, induce vomiting and go to the

nearest hospital. Additionally, vinyl packing can

cause suffocation. Keep it out of the reach of

children.

3

ENGLISH

• Concerning the Power Cord (Can differ by

country): Check the specification page of this

owner’s manual to be certain concerning

current requirements. Do not connect too

many devices to the same AC power outlet as

this could result in fire or electric shock. Do not

overload wall outlets. Overloaded wall outlets,

loose or damaged wall outlets, extension cords,

frayed power cords, or damaged or cracked

wire insulation are dangerous. Any of these

conditions could result in electric shock or fire.

Periodically examine the cord of your device,

and if its appearance indicates damage or

deterioration, unplug it, discontinue use of

the device, and have the cord replaced with

an exact replacement part by an authorized

servicer. Protect the power cord from physical or

mechanical abuse, such as being twisted, kinked,

pinched, closed in a door, or walked upon. Pay

particular attention to plugs, wall outlets, and

the point where the cord exits the device. Do not

move the TV with the power cord plugged in. Do

not use a damaged or loose power cord. Be sure

do grasp the plug when unplugging the power

cord. Do not pull on the power cord to unplug

the TV.

• To reduce the risk of fire or electrical shock,

do not expose this product to rain, moisture

or other liquids. Do not touch the TV with

wet hands. Do not install this product near

flammable objects such as gasoline or candles,

or expose the TV to direct air conditioning.

• Do not use high voltage electrical equipment

near the TV (e.g., a bug zapper). This may result

in product malfunction.

• Do not expose to dripping or splashing and

do not place objects filled with liquids, such as

vases, cups, etc. on or over the apparatus (e.g.,

on shelves above the unit).

• Grounding (Except for devices which are not

grounded.) Ensure that you connect the earth

ground wire to prevent possible electric shock

(i.e., a TV with a three-prong grounded AC plug

must be connected to a three-prong grounded

AC outlet). If grounding methods are not

possible, have a qualified electrician install a

separate circuit breaker. Do not try to ground

the unit by connecting it to telephone wires,

lightning rods, or gas pipes.

• As long as this unit is connected to the AC wall

outlet, it is not disconnected from the AC power

source even if the unit is turned off.

• Do not attempt to modify this product in any

way without written authorization from LG

Electronics. Unauthorized modification could

void the user’s authority to operate this product.

• Outdoor Antenna Grounding (Can differ by

country): If an outdoor antenna is installed,

follow the precautions below. An outdoor

antenna system should not be located in the

vicinity of overhead power lines or other electric

light or power circuits, or where it can come in

contact with such power lines or circuits as death

or serious injury can occur. Be sure the antenna

system is grounded to provide some protection

against voltage surges and built-up static

charges. Section 810 of the National Electrical

Code (NEC) in the U.S.A. provides information

with respect to proper grounding of the mast

and supporting structure, grounding of the

lead-in wire to an antenna discharge unit, size

of grounding conductors, location of antenna

discharge unit, connection to grounding

electrodes and requirements for the grounding

electrode.Antenna grounding according to the

National Electrical Code, ANSI/NFPA 70

• Moving Make sure the product is turned off,

unplugged, and all cables have been removed.

It may take 2 or more people to carry larger TVs.

Do not press or put stress on the front panel of

the TV.

• Ventilation Install your TV where there is proper

ventilation. Do not install in a confined space

such as a bookcase. Do not cover the product

with cloth or other materials while plugged. Do

not install in excessively dusty places.

• Take care not to touch the ventilation openings.

When watching the TV for a long period, the

ventilation openings may become hot. This does

not affect the performance of the product or

cause defects in the product.

• If you smell smoke or other odors coming from

the TV, unplug the power cord and contact an

authorized service center.

• If water or another substance enters the

product (like an AC adapter, power cord, or TV),

disconnect the power cord and contact the

service center immediately. Otherwise, this may

result in fire or electric shock.

• Do not install this product on a wall if it could be

exposed to oil or oil mist. This may damage the

product and cause it to fall.

• Use only an authorized AC adapter and power

cord approved by LG Electronics. Otherwise, this

may result in fire, electric shock, malfunction, or

product deformation.

• Never disassemble the AC adapter or power

cord. This may result in fire or electric shock.

• Handle the adapter carefully to avoid dropping

or striking it. An impact could damage the

adapter.

• Keep the product away from direct sunlight.

• Never touch this apparatus or antenna during a

lightning storm.

4

ENGLISH

• When mounting a TV on the wall, make sure not

to install the TV by hanging the power and signal

cables on the back of the TV.

• Do not allow an impact shock, any objects to fall

into the product, and do not drop anything onto

the screen.

• DISCONNECTING THE DEVICE FROM THE MAIN

POWER The power plug is the disconnecting

device. In case of an emergency, the power plug

must remain readily accessible.

• Make sure the power cord is connected securely

to the power plug on the TV.

• Batteries Store the accessories (battery, etc.) in a

safe location out of the reach of children.

• This apparatus uses batteries. In your community

there might be regulations that require you

to dispose of these batteries properly due to

environmental considerations. Please contact

your local authorities for disposal or recycling

information.

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble, or allow the

batteries to overheat.

• Cleaning When cleaning, unplug the power

cord and wipe gently with a soft cloth to prevent

scratching. Do not spray water or other liquids

directly on the TV as electric shock may occur.

Do not clean with chemicals such as alcohol,

thinners, or benzene.

Preparing

• When the TV is turned on for the first time after

being shipped from the factory, initialization of

the TV may take approximately one minute.

• Image shown may differ from your TV.

• Your TV’s OSD (On Screen Display) may differ

slightly from that shown in this manual.

• The available menus and options may differ from

the input source or product model that you are

using.

• New features may be added to this TV in the

future.

• The items supplied with your product may vary

depending upon the model.

• Product specifications or contents of this manual

may be changed without prior notice due to

upgrade of product functions.

• For an optimal connection, HDMI cables and

USB devices should have bezels less than 10 mm

(0.39 inches) thick and 18 mm (0.7 inches) width.

• Use an extension cable that supports USB 2.0 if

the USB cable or USB flash drive does not fit into

your TV’s USB port.

• Use a certified cable with the HDMI logo

attached. If you do not use a certified HDMI

cable, the screen may not display or a

connection error may occur.

• Recommended HDMI cable types (3 m or less)

- High-Speed HDMI®/™ cable

- High-Speed HDMI®/™ cable with Ethernet

B

A

B

*A 10 mm (0.39 inches)

*B 18 mm (0.7 inches)

• Do not use any unapproved items to ensure the

safety and lifespan of the product.

• Any damages or injuries by using unapproved

items are not covered by the warranty.

• Some models appear to have a thin film on the

screen. It is actually part of the screen; do not

remove it.

5

ENGLISH

• When attaching the stand to the TV set, place

the screen facing down on a cushioned table or

flat surface to protect the screen from scratches.

(Depending upon model)

• Make sure that the screws are fastened tightly.

(If they are not fastened securely enough, the TV

may tilt forward after being installed.)

• Do not fasten the screws with excessive force

otherwise they may be worn out and become

loose.

• Make sure to wring any excess water or cleaner

from the cloth.

• Do not spray water or cleaner directly onto the

TV screen.

• Make sure to spray just enough of water or

cleaner onto a dry cloth to wipe the screen.

Lifting and Moving the TV

When moving or lifting the TV, read the following

to prevent the TV from being scratched or

damaged and for safe transportation regardless of

its type and size.

• It is recommended to move the TV in the box or

packing material that the TV originally came in.

• Before moving or lifting the TV, disconnect the

power cord and all cables.

• When holding the TV, the screen

should face away from you to

avoid damage.

• Hold the top and bottom of the TV frame firmly.

Make sure not to hold the transparent part,

speaker, or speaker grille area.

• Use at least two people to move

a large TV.

• When transporting the TV by

hand, hold the TV as shown in the

following illustration.

• When transporting the TV, do not expose the TV

to jolts or excessive vibration.

• When transporting the TV, keep the TV upright;

never turn the TV on its side or tilt towards the

left or right.

• When handling the TV, be careful not to damage

the protruding buttons.

• Avoid touching the screen at all times, as

this may result in damage to the screen.

• Do not place the product on the floor with

its front facing down without padding.

Failure to do so may result in damage to the

screen.

• Do not move the TV by holding the cable

holders, as the cable holders may break,

and injuries and damage to the TV may

occur. (Depending upon model)

Using the Button

You can operate the TV functions, using the

button.

Basic Functions

Power On (Press)

Power Off

1

(Press and Hold)

Menu control (Press

2

)

Menu selection (Press and Hold

3

)

1 All running apps will close.

2 You can access and adjust the menu by pressing

the button when TV is on.

3 You can use the function when you access menu

control.

6

ENGLISH

Adjusting the Menu

When the TV is turned on, press the button one

time. You can adjust the Menu items using the

buttons.

Turns the power off.

Changes the input source.

Scrolls through the saved channels.

Adjusts the volume level.

Mounting on a Table

(Depending upon model)

1 Lift and tilt the TV into its upright position on a

table.

- Leave a 10 cm (4 inches) (minimum) space from

the wall for proper ventilation.

10 cm

(4 inches)

2 Connect the power cord to a wall outlet.

• Do not place the TV near or on sources

of heat, as this may result in fire or other

damage.

• Do not apply foreign substances (oils,

lubricants, etc.) to the screw parts when

assembling the product. (Doing so may

damage the product.)

Adjusting the Angle of the TV to Suit

View

(Depending upon model)

Swivel 20 degrees to the left or right and adjust the

angle of the TV to suit your view.

20˚20˚

• When adjusting the angle of the TV, watch

out for your fingers.

- Personal injury may occur if hands or

fingers are pinched. If the product is tilted

too much, it may fall, causing damage or

injury.

Attaching the TV to a desk (optional)

(Depending upon model)

If mounting the TV on a table, make sure it is

installed according to the method outlined in

‘Attaching the TV to a desk’.

The TV should be attached to a desk so it cannot

be pulled in a forward/backward direction,

potentially causing injury or damaging the

product.

4-Screws

(Not provided as parts of the product.)

Stand

Desk

7

ENGLISH

Using the kensington security

system (optional)

The Kensington security system connector is

located at the rear of the TV. For more information

of installation and using, refer to the manual

provided with the Kensington security system

or visit http://www.kensington.com. Connect the

Kensington security system cable between the TV

and a table.

• The Kensington security system is optional. You

can obtain additional accessories from your local

dealer.

Securing the TV to a Wall (optional)

(Depending upon model)

1 Insert and tighten the eye-bolts or TV brackets

and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts

position, remove the bolts first.

2 Mount the wall brackets with the bolts to the

wall. Match the location of the wall bracket and

the eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets tightly

with a sturdy rope or cable. Make sure to keep

the rope parallel to the flat surface.

• Make sure that children do not climb on or

hang on the TV.

• Use a platform or cabinet that is strong and

large enough to support the TV securely.

• Brackets, bolts, and ropes are optional. You

can obtain additional accessories from your

local dealer.

Mounting on a Wall

An optional wall mount can be used with your

LG Television. Consult with your local dealer for

a wall mount that supports the VESA standard

used by your TV model. Carefully attach the wall

mount bracket at the rear of the TV. Install the wall

mount bracket on a solid wall perpendicular to the

floor. If you are attaching the TV to other building

materials, please contact qualified personnel to

install the wall mount. Detailed instructions will

be included with the wall mount. We recommend

that you use an LG brand wall mount. The LG wall

mount is easy to adjust or to connect the cables.

When you do not use LG’s wall mount bracket,

use a wall mount bracket where the device is

adequately secured to the wall with enough space

to allow connectivity to external devices. If you are

using a non-adjustable mount, attach the mount

to the wall. Attach the cables to the TV first, then

attach the TV to the mount.

10 cm

(4 inches)

Make sure to use screws and wall mounts that

meet the VESA standard. Standard dimensions for

the wall mount kits are described in the following

table.

Model

43UV340C

43UV340H

49UV340C

49UV340H

55UV340C

55UV340H

VESA (A x B) 200 x 200 300 x 300

Standard screw M6 M6

Number of screws 4 4

Wall mount bracket

(optional)

LSW240B

MSW240

LSW350B

MSW240

8

ENGLISH

Model

65UV340C

65UV340H

75UV340C

VESA (A x B) 300 x 300 600 x 400

Standard screw M6 M8

Number of screws 4 4

Wall mount bracket

(optional)

LSW350B LSW640B

A

B

• Remove the stand before installing the TV

on a wall mount by performing the stand

attachment in reverse.

• When using the wall mount, it is recommended

that you apply a piece of tape over the Stand

holes to prevent dust and bugs from entering

the holes. (Depending upon model)

Stand Hole

Connections (Notifications)

You can connect various external devices to the TV.

Supported external devices are: HD receivers, DVD

players, VCRs, audio systems, USB storage devices,

PC, gaming devices, and other external devices. For

more information on external device’s connection,

refer to the manual provided with each device.

• If you record a TV program on a DVD recorder or

VCR, make sure to connect the TV signal input

cable to the TV through a DVD recorder or VCR.

For more information about recording, refer to

the manual provided with the connected device.

• The external device connections shown may

differ slightly from illustrations in a manual.

• Connect external devices to the TV regardless

about the order of the TV port.

• If you connect a gaming device to the TV, use the

cable supplied with the gaming device.

• Refer to the external equipment’s manual for

operating instructions.

• In PC mode, there may be noise associated

with the resolution, vertical pattern, contrast

or brightness. If noise is present, change the PC

output to another resolution, change the refresh

rate to another rate or adjust the brightness and

contrast on the Picture menu until the picture is

clear. Depending upon the graphics card, some

resolution settings may not allow the image to

be positioned on the screen properly.

• Some USB Hubs may not work. If a USB device

connected through a USB Hub is not detected,

connect it directly to the USB port on the TV.

• When connecting via a wired LAN, it is

recommended to use a CAT 7 cable.

Connecting to an Antenna or Cable

Connect an antenna, cable, or cable box to watch

TV while referring to the following. The illustrations

may differ from the actual items and an RF cable is

optional.

• Make sure not to bend the copper wire of the RF

cable.

Copper wire

• Complete all connections between devices, and

then connect the power cord to the power outlet

to prevent damage to your TV.

• Use a signal splitter to use 2 TVs or more.

• DTV Audio Supported Codec: MPEG, Dolby

Digital

• This TV cannot receive ULTRA HD (3840 x 2160

pixels) broadcasts directly because the related

standards have not been confirmed. (Depending

upon model)

9

ENGLISH

Other Connections

Connect your TV to external devices. For the best

picture and audio quality, connect the external

device and the TV with the HDMI cable.

• > > General > HDMI ULTRA HD

Deep Color:

- On : Support 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0)

- Off : Support 4K @ 60 Hz 8bit (4:2:0)

• If the device connected to Input Port also

supports ULTRA HD Deep Color, your picture

may be clearer. However, if the device doesn’t

support it, it may not work properly. In that case,

connect the device to a different HDMI port or

change the TV’s HDMI ULTRA HD Deep Color

setting to off.

• HDMI Audio Supported Format: DTS (44.1 kHz /

48 kHz), Dolby Digital / Dolby Digital Plus (32 kHz

/ 44.1 kHz / 48 kHz), PCM (32 kHz / 44.1 kHz / 48

kHz / 96 kHz / 192 kHz) (Depending upon model)

• Use only with the 3 pole 3.5 mm stereo jack.

• Do not connect your headphones or earphones

to the port for connecting an external speaker.

Remote Control

(Some buttons and services may not be provided

depending upon models or regions.)

The descriptions in this manual are based on

the buttons on the remote control. Please read

this manual carefully and use the TV correctly. To

install batteries, open the battery cover, replace

batteries (1.5 V AAA) matching the and ends

to the label inside the compartment, and close

the battery cover. Failure to match the correct

polarities of the batteries may cause the battery

to burst or leak, resulting in fire, personal injury,

or ambient pollution. To remove the batteries,

perform the installation actions in reverse. This

remote uses infrared light. When in use, it should

be pointed in the direction of the TV’s remote

sensor.

A

(Power) Turns the TV on or off.

Returns to the last TV channel.

Activates or deactivates the subtitles.

Not functional.

Resizes an image.

Changes the input source.

Number button Enters numbers.

(Dash) Inserts a dash between numbers such as

2-1 and 2-2.

Accesses the saved channel list.

Alternates between the two last

channels selected (pressing repeatedly).

Adjusts the volume level.

Accesses your favorite channel list.

Digital signal: Changes the audio language.

Analog signal: Changes the MTS sound.

Mutes all sounds.

• Pressing and holding the button

displays the Accessibility menu.

Scrolls through the saved channels.

Moves to the previous or next screen

10

ENGLISH

B

Changes the picture mode.

Shows information on the current

program.

Changes the sound mode.

Accesses the setting menu.

Accesses the quick menu.

Navigation button (up / down / left / right)

Scrolls through menus or options.

Selects menus or options and confirms your

input.

Returns to the previous screen.

Clears all on-screen displays and returns to

TV viewing.

Enables SAP (Secondary Audio Program)

Feature.

Sets the length of time until the TV to turns

off.

, , , , Control buttons for media contents

These access special functions in

some menus.

Settings

To select Picture Mode

• Picture • Picture Mode Settings • Picture

Mode

Select the picture mode optimized for the viewing

environment or the program.

• Vivid Heightens contrast, brightness, and

sharpness to display vivid images.

• Standard Displays images in standard levels of

contrast, brightness and sharpness.

• APS APS (Auto power saving) mode reduces

power consumption by dimming control.

• Cinema / Game Displays the optimum picture

for movie or game.

• Sports Optimised picture mode for football

matches. The pitch and kits are presented in

vibrant colours, with crystal-clear images even

for fast movements.

• HDR Effect This feature lets you enjoy a more

dynamic, clearer image by correcting the light

and dark areas of the display. This feature

provides a realistic image, even when the source

image’s gradation level is high. If you set Picture

Mode to HDR Effect, you will not be able to use

some of Picture Mode Settings.

• Expert Menu for adjusting picture quality that

allows experts and amateurs to enjoy the best TV

viewing. This menu for adjustment is provided

for ISF-certified picture tuning professionals.

(ISF logo can be used only on ISF-certified TVs.)

ISFccc: Imaging Science Foundation Certified

Calibration Control

• Depending upon the input signal, the available

range of picture modes may differ.

• Expert mode is for picture tuning professionals

to control and fine-tune using a specific image.

For normal images, the effects may not be

drastic.

• Picture Mode change may modify Energy

Saving and Motion Eye Care settings and it can

affect energy consumption.

11

ENGLISH

To set additional picture options

• Picture • Picture Mode Settings • Picture

Options

Adjusts detailed setting for images.

• Noise Reduction Eliminates noise in the picture.

• MPEG Noise Reduction Eliminates noise

generated while creating digital picture signals.

• Black Level Adjusts the brightness and contrast

of the screen to suit the black level.

• Real Cinema Optimizes the screen for movie

viewing.

• Motion Eye Care Automatically adjusts

brightness and reduces image blur based on

image data to reduce eyestrain.

• LED Local Dimming

Maximizes the contrast ratio by making the

bright areas of the screen brighter and the dark

areas of the screen darker.

- Off : Disables the LED Local Dimming function.

- Low / Medium / High : Changes the contrast

ratio.

Turning this option Off may increase energy

consumption.

• TruMotion Corrects images to display smoother

motion sequences. Auto means juddering and

blurring range that depend on input video status

is controlled by TruMotion mode.

• Depending upon input signal or other picture

settings, the range of detailed items for

adjustment may differ.

To use energy saving feature

• Picture • Energy Saving

Reduces power consumption by adjusting peak

screen brightness.

• Auto The TV sensor detects the ambient lighting

and automatically adjusts the screen brightness.

• Off Turns off the Energy Saving.

• Minimum / Medium / Maximum Applies the

pre-set Energy Saving.

• Screen Off Screen is turned off and only sound is

played. Press any button on the remote control

to turn the screen back on.

• Depending on the Energy Saving (Auto /

Maximum), you may not be able to adjust the

Backlight. In this case, navigate to • Picture

• Energy Saving and set to Off or Minimum.

Licenses

Supported licenses may differ by model. For more

information about licenses, visit www.lg.com.

Manufactured under license from Dolby

Laboratories. Dolby, Dolby Vision, Dolby Audio,

and the double-D symbol are trademarks of

Dolby Laboratories.

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS Licensing

Limited.

DTS, DTS-HD, the Symbol, & DTS or DTS-HD and

the Symbol together are registered trademarks of

The terms HDMI and HDMI High-Definition

Multimedia Interface, and the HDMI logo are

trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other

countries.

(Depending upon model)

12

ENGLISH

Open Source Software Notice

Information

To obtain the source code under GPL, LGPL, MPL,

and other open source licenses, that is contained in

this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license

terms, warranty disclaimers and copyright notices

are available for download.

LG Electronics will also provide open source code

to you on CD-ROM for a charge covering the cost

of performing such distribution (such as the cost of

media, shipping, and handling) upon email request

to [email protected]. This offer is valid for three

(3) years from the date on which you purchased

the product.

Troubleshooting

The software may be updated for improvement

in performance. The customer is responsible to

ensure the compatibility of their equipment with

any LG Electronics software. If needed, please

consult with LG Electronics and update new

software versions according to the guidance

provided by LG Electronics.

• Cannot control the TV with the remote control.

- Check if anything such as tape has been placed

over the receiver.

- Check if there is any obstacle between the

product and the remote control.

- Replace the batteries with new fresh ones.

• No image display and no sound is produced.

- Check if the product is turned on.

- Check if the power cord is connected to a wall

outlet.

- Check if there is a problem in the wall outlet by

connecting other products.

• The TV turns off suddenly.

- Check the power control settings.

- The power supply may be interrupted.

- Check if the Timer Power Off / Sleep Timer

feature is activated in the Timers settings.

- If there is no signal while the TV is on, the TV

will turn off automatically after 15 minutes of

inactivity.

• Abnormal Display

- If the TV feels cold to the touch, there may

be a small flicker when it is turned on. This is

normal; there is nothing wrong with TV. Some

minute dot defects may be visible on the

screen, appearing as tiny red, green, or blue

spots. However, they have no adverse effect on

the TV’s performance. Avoid touching the LCD

screen or holding your finger(s) against it for

long periods of time. Doing so may produce

some temporary distortion effects on the

screen.

- This panel is an advanced product that contains

millions of pixels. In a very few cases, you could

see fine dots on the screen while you’re viewing

the TV. Those dots are deactivated pixels and

do not affect the performance and reliability

of the TV.

- Displaying a still image for a prolonged period

of time may cause an image sticking. Avoid

displaying a fixed image on the TV screen for a

extended length of time.

• Generated Sound

- Cracking noise A cracking noise that occurs

when watching or turning off the TV is

generated by plastic thermal contraction

due to temperature and humidity. This noise

is common for products where thermal

deformation is required.

- Electrical circuit humming/panel buzzing

A low level noise is generated from a high-

speed switching circuit, which supplies a

large amount of current to operate a product.

It varies depending upon the product.

This generated sound does not affect the

performance and reliability of the product.

13

ENGLISH

Specifications

Product specifications may be changed without

prior notice due to upgrade of product functions.

Estimated yearly energy consumption indicated on

the FTC label is measured in accordance with the

Test Procedures for Television Sets (USA only).

The actual energy consumption depends on the

usage environment (The content watched, TV

settings, etc.).

Television System

ATSC, NTSC-M, 64 & 256 QAM

Program Coverage

VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135,

CADTV 1-135

External Antenna Impedance

75 Ω

Environment condition

• Operating Temperature

0 °C to 40 °C (32 °F to 104 °F)

• Operating Humidity

Less than 80 %

• Storage Temperature

-20 °C to 60 °C (-4 °F to 140 °F)

• Storage Humidity

Less than 85 %

HDMI (PC) supported mode

Resolution

Horizontal

Frequency (kHz)

Vertical

Frequency (Hz)

640 x 350 31.46 70.09

720 x 400 31.46 70.08

640 x 480 31.46 59.94

800 x 600 37.87 60.31

1024 x 768 48.36 60.00

1360 x 768 47.71 60.01

1152 x 864 54.34 60.05

1280 x 1024 63.98 60.02

1920 x 1080

67.50 60.00

135.00 120.00

3840 x 2160

54.00 24.00

56.25 25.00

67.50 30.00

4096 x 2160

53.95 23.97

54.00 24.00

HDMI (DTV) supported mode

Resolution

Horizontal

Frequency (kHz)

Vertical

Frequency (Hz)

640 x 480p

31.46 59.94

31.50 60.00

720 x 480p

31.47 59.94

31.50 60.00

720 x 480i 15.75 60.00

720 x 576p 31.25 50.00

720 x 576i 15.62 50.00

1280 x 720p

37.50 50.00

44.96 59.94

45.00 60.00

1920 x 1080i

28.12 50.00

33.72 59.94

33.75 60.00

1920 x 1080p

26.97 23.97

27.00 24.00

33.71 29.97

33.75 30.00

56.25 50.00

67.43 59.94

67.50 60.00

112.50 100.00

134.86 119.88

135.00 120.00

3840 x 2160p

53.95 23.98

54.00 24.00

56.25 25.00

61.43 29.97

67.50 30.00

112.50 50.00

134.86 59.94

135.00 60.00

4096 x 2160p

53.95 23.98

54.00 24.00

56.25 25.00

61.43 29.97

67.50 30.00

112.50 50.00

134.86 59.94

135.00 60.00

• The optimal display resolution

- 3840 X 2160

14

ENGLISH

Component port connecting information

(Depending upon model)

Component ports on the TV

Y P

B

P

R

Video output ports on DVD player

Y P

B

P

R

Y B-Y R-Y

Y Cb Cr

Y Pb Pr

Component supported mode

Resolution

Horizontal

Frequency (kHz)

Vertical

Frequency (Hz)

720 x 480i

15.73 59.94

15.75 60.00

720 x 576i 15.62 50.00

720 x 480p

31.47 59.94

31.50 60.00

720 x 576p 31.25 50.00

1280 x 720p

44.96 59.94

45.00 60.00

37.50 50.00

1920 x 1080i

28.12 50.00

33.72 59.94

33.75 60.00

1920 x 1080p

56.25 50

67.43 59.94

67.50 60.00

Supported Photo Formats

File Format Format Resolution

.jpeg, .jpg,

.jpe

JPEG

Minimum: 64 x 64,

Maximum: Normal Type:

15,360 (W) x 8,640 (H),

Progressive Type:

1,920 (W) x 1,440 (H)

.png PNG

Minimum: 64 x 64,

Maximum:

5,760 (W) x 5,760 (H)

.bmp BMP

Minimum: 64 x 64,

Maximum:

1,920 (W) x 1,080 (H)

Supported Audio Formats

File Format Info

.mp3

[Bit rate] 32 Kbps ~ 320 Kbps

[Sample freq.] 16 kHz ~ 48 kHz

[Support] MPEG-1, MPEG-2

[Channels] mono, stereo

.wav

[Bit rate] Free Format

[Sample freq.] 8 kHz ~ 96 kHz

[Support] PCM

[Channels] mono, stereo

.ogg

[Bit rate] 64 Kbps ~ 320 Kbps

[Sample freq.] 8 kHz ~ 48 kHz

[Support] Vorbis

[Channels] mono, stereo

.wma

[Bit rate] 128 Kbps ~ 320 Kbps

[Sample freq.] 8 kHz ~ 48 kHz

[Support] WMA

[Channels] up to 6 ch

.flac

[Bit rate] Free Format

[Sample freq.] 8 kHz ~ 96 kHz

[Support] FLAC

[Channels] mono, stereo

Supported Video Formats

Extension Codec

.asf, .wmv

Video

VC-1 Advanced Profile

(Except for WMVA), VC-1

Simple and Main Profiles

Audio

WMA Standard (except for

WMA v1/ WMA Speech)

.avi

Video

Xvid (except for 3 warp-point

GMC), H.264/AVC, Motion

Jpeg, MPEG-4

Audio

MPEG-1 Layer I, II, MPEG-1

Layer III (MP3), Dolby Digital,

LPCM, ADPCM, DTS

.mp4,

.m4v,

.mov

Video H.264/AVC, MPEG-4, HEVC

Audio

Dolby Digital, Dolby Digital

Plus, AAC, MPEG-1 Layer III

(MP3)

.3gp, .3g2

Video H.264/AVC, MPEG-4

Audio AAC, AMR-NB, AMR-WB

.mkv

Video

MPEG-2, MPEG-4, H.264/AVC,

VP8, VP9, HEVC

Audio

Dolby Digital, Dolby Digital

Plus, AAC, PCM, DTS, MPEG-1

Layer I, II, MPEG-1 Layer III

(MP3)

.ts, .trp,

.tp, .mts

Video H.264/AVC, MPEG-2, HEVC

Audio

MPEG-1 Layer I, II, MPEG-1

Layer III (MP3), Dolby Digital,

Dolby Digital Plus, AAC, PCM

.mpg,

.mpeg,

.dat

Video MPEG-1, MPEG-2

Audio

MPEG-1 Layer I, II, MPEG-1

Layer III (MP3)

15

ENGLISH

.vob

Video MPEG-1, MPEG-2

Audio

Dolby Digital, MPEG-1 Layer I,

II, DVD-LPCM

.rm, .rmvb

Video RV30, RV40

Audio

Realaudio6 (cook), AAC LC,

HE-AAC

.mkv,

.mp4, .ts

Video H.264/AVC, HEVC

Audio

Dolby Digital, Dolby Digital

Plus, AAC

Regulatory

FCC NOTICE

(For USA)

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses

and can radiate radio frequency energy and, if

not installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on, the user is encouraged

to try to correct the interference by one or more of

the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the

equipment and the receiver.

- Connect the equipment to an outlet on a circuit

different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV

technician for help.

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful

interference and (2) this device must accept any

interference received, including interference that

may cause undesired operation of the device. Any

changes or modifications in construction of this

device which are not expressly approved by the

party responsible for compliance could void the

user’s authority to operate the equipment.

FCC Radio Frequency Interference

Requirements (for UNII devices)

High power radars are allocated as primary users

of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands.

These radar stations can cause interference with

and/or damage this device. This device cannot be

co-located with any other transmitter.

FCC RF Radiation Exposure Statement

[For having wireless function (WLAN, Bluetooth,...)]

This equipment complies with FCC radiation

exposure limits set forth for an uncontrolled

environment. This transmitter must not be

colocated or operating in conjunction with any

other antenna or transmitter. This equipment

should be installed and operated with minimum

distance 20 cm (7.8 inches) between the radiator

and your body. Users must follow the specific

operating instructions for satisfying RF exposure

compliance.

Industry Canada Statement

(For Canada)

[For having wireless function (WLAN, Bluetooth,...)]

This device complies with Industry Canada’s

applicable licence-exempt RSSs. Operation is

subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference,

including interference that may cause undesired

operation of the device.

16

ENGLISH

IC Radiation Exposure Statement

(For Canada)

[For having wireless function (WLAN, Bluetooth,...)]

This equipment complies with IC radiation

exposure limits set forth for an uncontrolled

environment. This equipment should be installed

and operated with minimum distance 20 cm (7.8

inches) between the antenna & your body.

NOTE : THE MANUFACTURER IS NOT RESPONSIBLE

FOR ANY RADIO OR TV INTERFERENCE CAUSED

BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT. SUCH MODIFICATIONS COULD

VOID THE USER’S AUTHORITY TO OPERATE THE

EQUIPMENT.

(For Canada)

[For product having the wireless function using 5

GHz frequency bands]

• The device for operation in the band 5150–5250

MHz is only for indoor use to reduce the

potential for harmful interference to co-channel

mobile satellite systems;

• For devices with detachable antenna(s), the

maximum antenna gain permitted for devices in

the bands 5250-5350 MHz and 5470-5725 MHz

shall be such that the equipment still complies

with the e.i.r.p. limit;

• For devices with detachable antenna(s), the

maximum antenna gain permitted for devices in

the band 5725-5850 MHz shall be such that the

equipment still complies with the e.i.r.p. limits

specified for point-to-point and non-point-to-

point operation as appropriate; and

• The worst-case tilt angle(s) necessary to remain

compliant with the e.i.r.p. elevation mask

requirement set forth in Section 6.2.2(3) shall be

clearly indicated.(devices operating in the band

5250-5350 MHz with a maximum e.i.r.p. greater

than 200 mW)

• High-power radars are allocated as primary users

(i.e. priority users) of the bands 5250–5350 MHz

and 5650–5850 MHz and that these radars could

cause interference and/or damage to LE-LAN

devices.

NOTE TO CABLE/TV INSTALLER

(For USA and Canada)

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the

National Electric Code (U.S.A.). The code provides

guidelines for proper grounding and, in particular,

specifies that the cable ground shall be connected

to the grounding system of the building, as close

to the point of the cable entry as practical.

WARNING!

Never place a television set in an unstable

location. A television set may fall, causing serious

personal injury or death. Many injuries, particularly

to children, can be avoided by taking simple

precautions such as:

• Using cabinets or stands recommended by the

manufacturer of the television set.

• Only using furniture that can safely support the

television set.

• Ensuring the television set is not overhanging

the edge of the supporting furniture.

• Not placing the television set on tall furniture

(for example, cupboards or bookcases) without

anchoring both the furniture and the television

set to a suitable support.

• Not placing the television set on cloth or other

materials that may be located between the

television set and supporting furniture.

• Educating children about the dangers of

climbing on furniture to reach the television set

or its controls.

If your existing television set is being retained

and relocated, the same considerations as above

should be applied.

Symbols

Refers to alternating current(AC).

Refers to direct current(DC).

Refers to class II equipment.

Refers to stand-by.

Refers to “ON” (power).

Refers to dangerous voltage.

17

ENGLISH

Key Codes

• This feature is not available for all models.

Code

(Hexa)

Function Note

Code

(Hexa)

Function Note

00 R/C Button 52 R/C Button

01

R/C Button 61 R/C Button

02 R/C Button 63 R/C Button

03 R/C Button 71 R/C Button

06 R/C Button 72 R/C Button

07 R/C Button 79 R/C Button

08 (Power) R/C Button 4C R/C Button

09 R/C Button 5B R/C Button

0B

R/C Button 0A R/C Button

1A R/C Button 8E R/C Button

0F R/C Button 8F R/C Button

10 - 19 Number Key 0 - 9 R/C Button 0E R/C Button

45 R/C Button AA

R/C Button

28 R/C Button B0 R/C Button

30 R/C Button B1 R/C Button

39 R/C Button BA R/C Button

40 R/C Button 1E R/C Button

41 R/C Button 4D R/C Button

43 R/C Button 91 R/C Button

44 R/C Button

• Key code 4C (0x4C) is available on ATSC / ISDB models which use major / minor channel.

(For South Korea, Japan, North America, Latin America except Colombia models)

18

ENGLISH

EXTERNAL CONTROL DEVICE SETUP

(Image shown may differ from your TV.)

• Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or

an A/V control system) to control the product’s functions externally.

Note: The type of control port on the TV can be different between model series.

• Please be advised that not all models support this type of connectivity.

• Cable is not provided.

USB to Serial converter with USB Cable

USB Type

USB IN

(TV)

(PC)

RS-232C IN

(CONTROL & SERVICE)

(TV)

(PC)

(TV)

(PC)

SERVICE ONLY

RS-232C IN

(CONTROL & SERVICE)

RS-232C IN

(CONTROL & SERVICE)

1

3

2

1

3

2

• LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter which is

not made nor provided by LG.

• It can be purchased from computer stores that carry accessories for IT support professionals.

RS-232C with RS-232C Cable

DE9 (D-Sub 9 pin) Type

• You need to purchase the RS-232C (DE9, D-Sub 9 pin female-to-female type) to RS-232C cable required for

the connection between the PC and the TV, which is specified in the manual.

• The connection interface may differ from your TV.

USB IN

(TV)

(PC)

RS-232C IN

(CONTROL & SERVICE)

(TV)

(PC)

(TV)

(PC)

SERVICE ONLY

RS-232C IN

(CONTROL & SERVICE)

RS-232C IN

(CONTROL & SERVICE)

1

3

2

1

3

2

Phone jack Type

• You need to purchase the phone-jack to RS-232C cable required for the connection between the PC and the

TV, which is specified in the manual.

• For other models, connect to the USB port.

• The connection interface may differ from your TV.

USB IN

(TV)

(PC)

RS-232C IN

(CONTROL & SERVICE)

(TV)

(PC

)

(TV)

(PC)

SERVICE ONLY

RS-232C IN

(CONTROL & SERVICE)

RS-232C IN

(CONTROL & SERVICE)

1

3

2

1

3

2

or

USB IN

(TV)

(PC)

RS-232C IN

(CONTROL & SERVICE)

(TV)

(PC)

(TV)

(PC

)

SERVICE ONLY

RS-232C IN

(CONTROL & SERVICE)

RS-232C IN

(CONTROL & SERVICE)

1

3

2

1

3

2

19

ENGLISH

Set ID

For Set ID number, see “Real Data Mapping”.

1 Press to access the main menus.

2 Press the Navigation buttons to scroll to General Set ID and press .

3 Press the Navigation buttons to scroll to SET ID and press .

4 Scroll left or right to select a set ID number and select , , . The adjustment range is 1-99.

5 When you are finished, press .

* (Depending upon model)

Customer Computer

1

6

5

9

RS-232C

(Serial port)

RS-232C Configurations

7-Wire Configurations

(Standard RS-232C cable)

3-Wire Configurations

(Not standard)

PC TV

RXD 2 3 TXD

TXD 3 2 RXD

GND 5 5 GND

DTR 4 6 DTR

DSR 6 4 DSR

RTS 7 8 RTS

CTS 8 7 CTS

D-Sub 9 D-Sub 9

PC TV

RXD 2 3 TXD

TXD 3 2 RXD

GND 5 5 GND

DTR 4 6 DTR

DSR 6 4 DSR

RTS 7 8 RTS

CTS 8 7 CTS

D-Sub 9 D-Sub 9

20

ENGLISH

Communication Parameters

Baud rate : 9600 bps (UART)

Data length : 8 bits

Parity : None

Stop bit : 1 bit

Communication code : ASCII code

Use a crossed (reverse) cable.

Command reference list

(Depending upon model)

COMMAND1 COMMAND2

DATA

(Hexadecimal)

COMMAND1 COMMAND2

DATA

(Hexadecimal)

01. Power* k a 00 to 01

11. OSD

Select

k l 00 to 01

02. Aspect

Ratio

k c (page 22)

12. Remote

Control Lock

Mode

k m 00 to 01

03. Screen

Mute

k d (page 22) 13. Balance k t 00 to 64

04. Volume

Mute

k e 00 to 01

14. Color

(Colour)

Temperature

x u 00 to 64

05. Volume

Control

k f 00 to 64 15. Equalizer j v (page 24)

06. Contrast k g 00 to 64 16. Key m c Key Codes

07. Brightness k h 00 to 64

17.

Control

Backlight,

Control Panel

Light

m g 00 to 64

08. Color/

Colour

k i 00 to 64

18. Input

select (Main)

x b (page 24)

09. Tint k j 00 to 64

19. 3D (Only

3D models)

x t (page 25)

10. Sharpness k k 00 to 32

20. Extended

3D (Only 3D

models)

x v (page 25)

* Note: During playing or recording media, all commands except Power (ka) and Key (mc) are not executed

and treated as NG. With RS-232C cable, TV can communicate “ka command” in power-on or power-off

status. But with USB-to-Serial converter cable, the command works only if TV is on.

La page charge ...

LG 65UV340C Le manuel du propriétaire

Ce manuel convient également à

LG 65UV340C Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents